That will be fine. You will actually wind up with a stronger spar that way.
-------- Original Message -------- Subject: KR> Fixing a mistake From: "Gary Robison" <djgaryl...@verizon.net> List-Post: krnet@list.krnet.org Date: Mon, December 17, 2012 9:22 am To: "KRnet" <kr...@mylist.net> I made a wrong cut on my rear main spar (AS airfoil) The spar was to be cut 4.77" with a 12 deg cut on top and a 9 deg on the bottom. I made the 9 degree cut the wrong direction this /-------/ instead of /-------\ I had read some place that if you had cut your spars for the old airfoil and wanted to use the new one you could glue up another sparcap and recut it. To repair mine the piece would be about 1/4" and taper to 0" Do you think this would work ? there would be a 1/4" not supported by the ply shear. Gary N49GR _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
