Am 16.07.2018 um 10:06 schrieb Ruben :
>
> Hi Stefan,
>
>
> What kind of device are you trying to connect?
>
>
>
> Kind regards,
>
>
> Ruben
>
> On 07/16/2018 08:22 AM, Stefan Bethke wrote:
>> Am 15.07.2018 um 13:32 schrieb Ruben :
>>> I remember reading somewhere that PC Engines recommend
Hi Stefan,
What kind of device are you trying to connect?
I'm not a contributer to FreeBSD code (so please don't expect any
patches from me) but if its something I happen to have lying around
somewhere I might be able to reproduce your problem.
Kind regards,
Ruben
On 07/16/2018 08:22 A
Am 15.07.2018 um 13:32 schrieb Ruben :
>
> I remember reading somewhere that PC Engines recommends running the "legacy"
> version of the firmware if the OS is FreeBSD/PFSense etc. Perhaps worth a try
> to "upgrade" to the legacy series of firmware?
I’ve just tried with 4.0.18, and the US3 ports
Hi Stefan,
On 07/15/2018 11:55 AM, Stefan Bethke wrote:
I’m having problems with the two USB3 ports at the back, and I have the
non-legacy BIOS version 4.8.0.1.
Are USB devices working as expected for you?
The only time I use an USB device is when I install or perform firmware
upgrades (no
> Am 14.07.2018 um 16:34 schrieb Ruben :
>
> Hi Graham,
>
> On 07/14/2018 06:03 AM, Graham Menhennitt wrote:
>> This probably isn't much use to you, but I'm running FreeBSD 11-Stable on
>> two APU2s. But I'm booting from SSD, not SDHC. No problems here.
>>
>> Graham
>> ___
Hi Graham,
On 07/14/2018 06:03 AM, Graham Menhennitt wrote:
This probably isn't much use to you, but I'm running FreeBSD 11-Stable
on two APU2s. But I'm booting from SSD, not SDHC. No problems here.
Graham
___
Thank you for your feedback. Good to h
On 13/07/2018 18:46, Ruben wrote:
I have 2 Pc Engines APU's. They have been running 10.x and 11.0/1
without any issues for quite some time now. I've updated the APU1 to
11.2 without an problems. The APU2 however throws thousands of
First I thought the sdhc card was to blame and restored a back
Hi List,
I have 2 Pc Engines APU's. They have been running 10.x and 11.0/1
without any issues for quite some time now. I've updated the APU1 to
11.2 without an problems. The APU2 however throws thousands of
mmc0: Card at relative address 1 failed to select
and hundreds of
mmc0: CMD7 fai
