Hi Graham,
On 07/14/2018 06:03 AM, Graham Menhennitt wrote:
This probably isn't much use to you, but I'm running FreeBSD 11-Stable
on two APU2s. But I'm booting from SSD, not SDHC. No problems here.
Graham
_______________________________________________
Thank you for your feedback. Good to hear more list ppl are running
APU2's :)
I think the issue was triggered by the SDHC/MMC driver in 11.2 and the
APU2's firmware because after updating the firmware I ran (4.0.7) to the
most recent firmware available on https://pcengines.github.io/#lr-10
(4.0.18 legacy), the problem was solved.
Since PC Engines advises users to only run the github firmware if users
have the possibility to de-brick their units (which I only learned about
afterwards and requires special hardware..) I guess some caution is
advised.
The board seems to be running fine with 11.2 now so I'm happy :)
Kind regards,
Ruben
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
