> Am 14.07.2018 um 16:34 schrieb Ruben <m...@osfux.nl>: > > Hi Graham, > > On 07/14/2018 06:03 AM, Graham Menhennitt wrote: >> This probably isn't much use to you, but I'm running FreeBSD 11-Stable on >> two APU2s. But I'm booting from SSD, not SDHC. No problems here. >> >> Graham >> _______________________________________________ > > Thank you for your feedback. Good to hear more list ppl are running APU2's :) > > I think the issue was triggered by the SDHC/MMC driver in 11.2 and the APU2's > firmware because after updating the firmware I ran (4.0.7) to the most recent > firmware available on https://pcengines.github.io/#lr-10 (4.0.18 legacy), the > problem was solved. > > Since PC Engines advises users to only run the github firmware if users have > the possibility to de-brick their units (which I only learned about > afterwards and requires special hardware..) I guess some caution is advised. > > > The board seems to be running fine with 11.2 now so I'm happy :)
I’m having problems with the two USB3 ports at the back, and I have the non-legacy BIOS version 4.8.0.1. Are USB devices working as expected for you? Stefan -- Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
