Mark Murray wrote:
> > I reported it about a month ago, but the problem still persists. 5-current
> > buildworld can't be performed on reasonably recent 4-stable system, hence
> > source upgrade path from -stable to -current is broken. Please fix.
>
> I just did this on 4-STABLE with no problems
Just installed new world, rebuild kernel, ran mergemaster and after reboot
discovered that the system slowed down 4-5 times. Turning harvest_interrupt=NO
in /etc/rc.conf solved the problem. The system in question is Toshiba Satellite
Pro 445 notebook, see dmesg and kernel config attached with this
Hi,
I've been unable to boot any kernel (including GENERIC) built in the past
week or so. The machine restarts immediately the kernel is entered, no
console output whatsoever after the loader. Older kernels are fine. Have I
missed some important change, and/or how do I go about debugging this?
On Tue, 6 Mar 2001, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, Maxim Sobolev writes:
> >Well, we are now well informed about this, could we just fix sys/sys/user.h to match
> >relity (credit goes to phk for broking it and ignoring my posts completely)?
>
> I've been kind of waiti
> Just installed new world, rebuild kernel, ran mergemaster and after
> reboot discovered that the system slowed down 4-5 times. Turning
> harvest_interrupt=NO in /etc/rc.conf solved the problem. The system in
> question is Toshiba Satellite Pro 445 notebook, see dmesg and kernel
> config attached
On Tue, 6 Mar 2001, Christian Weisgerber wrote:
> Steve Kargl <[EMAIL PROTECTED]> wrote:
>
> > dump.8 and dump(8) both refer explicitly to nsa0 and nrsa0 whereas
> > sa0 and nsa0 are the actual device names in -current.
The dump sources also refer to only the 'r' devices (_PATH_DEFTAPE
is still
Steve Kargl wrote:
>
> The "r" in tape device names has traditionally meant "r"ewind.
Nope. When this was discussed a while ago we got some authoritative
information to the effect that "r" has always meant raw for tapes too.
--
Daniel C. Sobral(8-DCS)
[EMAIL PROTECTED]
> > Apart from a ridiculously low maxusers (you have 10, I recommend 128),
> > I'm not sure what the problem is.
>
> I do not see why it is "ridiculously low". Even GENERIC recommends 32, while
> this is a small system intended to be used by only one person, so I do not see
> any problem with it.
On Wed, 7 Mar 2001, Mark Murray wrote:
> > > Apart from a ridiculously low maxusers (you have 10, I recommend 128),
> > > I'm not sure what the problem is.
> >
> > I do not see why it is "ridiculously low". Even GENERIC recommends 32, while
> > this is a small system intended to be used by only
> Just do something that causes a lot of interrupts that go through the
> random harvester. E.g.:
>
> dd if=/dev/ad0 of=/dev/null
>
> causes 7750 interrupts/sec here (on a Celeron 366 overclocked to
> 522). The random task takes 100% of the available cpu cycles. This
> slows down cpu-boun
subscribe freebsd-current
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
:> causes 7750 interrupts/sec here (on a Celeron 366 overclocked to
:> 522). The random task takes 100% of the available cpu cycles. This
:> slows down cpu-bound processes by a factor of about 3.5. With a block
:> size of 64k instead of the default of 512, this causes only 300
:> interrupts/se
In message <[EMAIL PROTECTED]> Maxim Sobolev writes:
: I reported it about a month ago, but the problem still persists. 5-current
: buildworld can't be performed on reasonably recent 4-stable system, hence
: source upgrade path from -stable to -current is broken. Please fix.
I have the same box t
At some point in the past 24 hours, someone broke the kernel so I can
no longer run linux-opera:
root@des /var/crash# gdb -k
GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribu
> I think it would be a much better idea to cap the number of interrupts
> per second the reseeder accepts. e.g. have a sysctl to set the
> max and default it to something reasonable, like 200. The seeder would
> thus only run 200 times a second even if A person were getting
>
On Wed, Mar 07, 2001 at 07:25:41PM +0100, Dag-Erling Smorgrav wrote:
> At some point in the past 24 hours, someone broke the kernel so I can
> no longer run linux-opera:
Same here with another Linux binary (Tivoli Storage Manager client).
--
I believe the technical term is "Oops!
:> I think it would be a much better idea to cap the number of interrupts
:> per second the reseeder accepts. e.g. have a sysctl to set the
:> max and default it to something reasonable, like 200. The seeder would
:> thus only run 200 times a second even if A person were gettin
> 1) Reduce the ring size to something reasonable. 1024 is massive
> overkill. 32 would be just fine.
I'll play with this.
> 2) Add a mandatory tsleep in random_kthread() for EACH entry scanned
> from the harvest ring. Something reasonable like 1/10 second (similar
> to wh
On 07-Mar-01 Dag-Erling Smorgrav wrote:
> At some point in the past 24 hours, someone broke the kernel so I can
> no longer run linux-opera:
>
> root@des /var/crash# gdb -k
> GNU gdb 4.18
> Copyright 1998 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public Li
Hi all
>From sources cvsup'd about an hour ago, "make depend" complains:
../../dev/ed/if_ed_pccard.c:58: miibus_if.h: No such file or directory
and fails. This is after deleting the old kernel build dir.
Paul
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in
Did you add "device miibus" to you kernel configuration?
Jim Bloom
[EMAIL PROTECTED]
Paul Allenby wrote:
>
> Hi all
>
> >From sources cvsup'd about an hour ago, "make depend" complains:
>
> ../../dev/ed/if_ed_pccard.c:58: miibus_if.h: No such file or directory
>
> and fails. This is after de
:Hmm. Sounds doable. I'll play.
:
:> A 1/10 second sleep and a ring limit of 32 still gives you an effective
:> 320 seeds per second. Still overkill, but at least not the massive
:> overkill that its doing now.
:
:Event != seed. I'll juggle numbers and see if I can come up with any
Hello! your domain today!
My Groups |
HipHopProductions Main Page
for those who have recieved this e-mail in error, please e-mail [EMAIL PROTECTED] and we appologize for any inconvenience. DO NOT REPLY TO THIS E-MAIL.
Hip Hop Productions Newsletter
What da deal folk?!?!
On Wed, 7 Mar 2001, Leif Neland wrote:
> I've got a USB programmer for my Flashram for my Garmin GPS.
>
> It doesn't work, and causes blue screen under windows...
>
> Is this the proof for it is broken?
>
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988,
I searched the archives, and found this question asked, but no responses.
I wonder when (if) Perl 5.6 will be MFC'd to 4.x.
Thanks,
_F
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
On Wed, Mar 07, 2001 at 04:55:08PM -0800, Thomas Moestl wrote:
> Log:
> Fix two bugs in null suffix handling. Both occured only after the suffix
> list was cleared.
> Rules with null suffixes would not be rebuilt when the suffixes were
> added again.
> Adding null suffix rules would fa
I use freebsd-current(src-cur.4750.gz),I make world,
install new kernel, all thing are right. but i compile
my php-4.0.4p1 and apache-1.3.17(static module), when
i run /usr/local/www/bin/apachectl start, it die!
httpd dump a core file! why?
__
Do Yo
> I run -STABLE, and was pondering over a problem I've been having with
> a USB device when I saw your problem. Could you try something?
> After you get that error above, move the device to the another USB
> port. I can manage to panic my system by doing that, except I'm doing
> it with a USB ga
I am using the standard freebsd.mc created during a buildworld. I have
started noticing that I am missing/rejecting a lot of emails from places
like: yahoogroups.com. It is a valid domain name, and I can't imagine why
I would not want to get their emails (well, actually I can, but that is
beside
On Wed, Mar 07, 2001 at 06:33:09PM -0500, Forrest Aldrich wrote:
> I searched the archives, and found this question asked, but no responses.
> I wonder when (if) Perl 5.6 will be MFC'd to 4.x.
^^
Uh, _*WHY*_ are you sending this to freebsd-current
root> I am using the standard freebsd.mc created during a buildworld. I
root> have started noticing that I am missing/rejecting a lot of emails
root> from places like: yahoogroups.com.
It would be helpful to show the actual log message so we can determine why
it is being rejected. If it is some
I don't object - they're obvious bug fixes.
- Jordan
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
subscribe freensd-current
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
subscribe freebsd-current
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
34 matches
Mail list logo