> How/Where is the setup for the IPv6?
>
> Shaun
If you have recent tree or Freebsd4.0 RC3, then there will be
IPv6 specific configuration examples in /etc/defaults/rc.conf.
The lines which start from "ipv6_..." are them.
At least you need to set ipv6_enable to YES.
You need to add the follwing
>> And here is the patches.
>
>The last patches should work but I found a improvement related
>to coexistence with gif, so this is the updated patches.
>
> I applied a variant of your patch to my NetBSD/i386 -currentish box that
> also uses the KAME stack and was able to ping6 your 6t
>I applied a variant of your patch to my NetBSD/i386 -currentish box that
>also uses the KAME stack and was able to ping6 your 6to4 address.
For NetBSD-current, I'll bring in cleaner 6to4 code (since netbsd is
not that close to the deadline).
please wait for a while...
it
Here are the patches which seem to fix the libRSAglue upgrade problems
people had been seeing when upgrading from trees built in a certain time
window. I've tested these on both an older system which was breaking and a
current one with no ill effects - nor should there be any since libRSAglue
is a
On Fri, Mar 10, 2000 at 10:48:22AM -0800, Mike Smith wrote:
> > Hi Jonathan,
> >
> > > Note that I just committed some more changes to the IDA driver to
> > > 4.0-RC yesterday. The changes are:
> > >
> > > - support for EISA controllers (untested)
> > > - support for newer S2400 controllers (unt
OK. How about if I put the controller in a spare PC, stick a -current on there, and
give you telnet access?
Hopefully it _is_ just something stupid I'm doing, but at least that will cure my
problem.
If it's not, it may be a problem for others as well.
Lawrence
To Unsubscribe: send mail to [EM
Is there any way to see the full IPv6 address with netstat? I just see:
ben@strontium:~$ netstat -an -f inet6
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address Foreign Address(state)
tcp6 0 0 2002:d4e4:e0d:0:.989 2002:d4e4:e0d:0:.22
On Fri, Mar 10, 2000 at 07:45:33PM -0600, Jeffrey J. Mountin wrote:
>
> Hopefully that "yet" will be "never" so one can boot sans keyboard and
> later hook one up if need be.
For me it cannot come soon enough. *FINALLY* the PC toy will act like a
real Unix computer. This is the behavior of al
> Is there any way to see the full IPv6 address with netstat? I just see:
>
> ben@strontium:~$ netstat -an -f inet6
> Active Internet connections (including servers)
> Proto Recv-Q Send-Q Local Address Foreign Address(state)
> tcp6 0 0 2002:d4e4:e0d:0:.989 2002:d4e
Hi,
> On Sat, 11 Mar 2000 12:44:57 +
> Ben Smithurst <[EMAIL PROTECTED]> said:
ben> Is there any way to see the full IPv6 address with netstat? I just see:
Try do with -l option.
ume@peace:263# netstat -anl -f inet6
Active Internet connections (including servers)
Proto Recv-Q Send-
> > Compaq claimed that the documentation necessary to do this was
available,
> > but it's not. I've tried to contact the individual that I spoke to
about
> > this, but he's not returning email or phone calls. 8(
>
> I've tried this internally in Compaq and the answer is quite clear IMO:
> "The c
I have a win98 box connected to a 4.0-current box via an ethernet
connection. The connection will go dead after about 20 minutes. I'm
unable to ping the win98 box and cannot ping the FreeBSD box from the
win98 box. No error/console messages. I can bring it back to life by
doing an ifconfig dc1
On Fri, Mar 10, 2000 at 06:13:14PM +, [EMAIL PROTECTED] wrote:
> I am currently experiencing problems with the 0307 -CURRENT snapshot, and
> the dc driver. I previously have had no problems with the pn driver I had
[snip]
Yes, I'm using a LinkSys card with -CURRENT:
dc0: port 0xd400-0xd4f
>I applied a variant of your patch to my NetBSD/i386 -currentish box that
>also uses the KAME stack and was able to ping6 your 6to4 address.
For NetBSD-current, I'll bring in cleaner 6to4 code (since netbsd is
not that close to the deadline).
please wait fo
In message <[EMAIL PROTECTED]> Kent Hauser writes:
: I of course did this because "device_set_unit" didn't link.
:
: Any suggestions?
Yes. I forgot to include this in my original patch. Grab a new copy.
I've updated the patch to include this. Sorry for any trouble this
cuased.
http://
Ryan Thompson wrote:
>
> I'm not sure, that's why I asked the list :-) Really, what I was asking
> is if there is a better way to detect a serial console.. Rather than the
> current logic of "If there is no keyboard, there must be a serial
> console". I can think of N reasons why a box would ha
Yoshinobu Inoue wrote:
> Please add "-l" flag.
ah.. thanks.
> And sorry, it is not added to netstat man yet.
I see you've just commited a change there, but I think it needs adding to
the usage message as well:
ben@platinum:~$ netstat -\?
netstat: illegal option -- ?
usage: netstat [-Aan] [-f
> > And sorry, it is not added to netstat man yet.
>
> I see you've just commited a change there, but I think it needs adding to
> the usage message as well:
>
> ben@platinum:~$ netstat -\?
> netstat: illegal option -- ?
> usage: netstat [-Aan] [-f address_family] [-M core] [-N system]
>
Jeffrey J. Mountin wrote to Ryan Thompson:
> At 09:19 PM 3/10/00 -0600, Ryan Thompson wrote:
> >Me as well...For at least a decade. I used to do it manually all the
> >time, but had occasional glitches with funny scan codes and indicator
> >statuses. With a mid-range priced switch, though, I ha
Hi,
I've installed XFree86 version 4 trough the ports
collection
but it won't start and I think it is because of the
missing mouse module. Since I'm using lynx, I can't
attached the /var/log/XFree86.0.log file for your
reference. I can only paste the error I found in the
file.
.
(II) LoadModul
I'm having some weird problems with PnP, I guess. I have a "SmartLink 56K
Voice Fax Modem" that I just stuck into the computer. Before I added the
PnP magic to src/sys/isa/sio.c, in the kernel messages just said unknown
for it, which is what I expected. So at that point I had three unkowns,
one
Ok, now I would like to get some good info on IPv6 and how it is
structured. Mainly looking for how it works in regards to setting up IP's
and how the IP formatting works. Eg. IPv4 has special blocks of IPs that
are only used for internal networks with there own subnet masks etc.
That kind of i
On Sat, Mar 11, 2000 at 12:24:10PM -0800, Nawfal M. Rouyan wrote:
> Hi,
> I've installed XFree86 version 4 trough the ports
> collection
> but it won't start and I think it is because of the
> missing mouse module. Since I'm using lynx, I can't
> attached the /var/log/XFree86.0.log file for your
>
Hi.
I'm testing 2307-SNAP and I found that USA_RESIDENT is set to YES
even if I installed from CD-ROMs with crypto distribution compiled
from international crypto sources.
How about adding something like following patch to sysinstall?
(this patch has not tested yet)
Index: dist.c
==
I believe I'm looking for a public IPv6 address to use for testing
purposes. So where/what addresses can I use is my question.
then how I intergrate that into my setup.
Hope that makes the question more clearer.
Thanks
On Sat, 11 Mar 2000, Shaun (UNIX) wrote:
> Ok, now I would like to get some
My problem is a little different. XFree86-4.0 loads
fine looks great but the mouse does not work. There
are no errors. I tried PS/2 , serial, etc same with
them all. The pointer appears then moves to the upper
right and dissappers. I tried moving it...Mouse1, etc.
but nothing Any ideas?
Note
> I believe I'm looking for a public IPv6 address to use for testing
> purposes. So where/what addresses can I use is my question.
> then how I intergrate that into my setup.
>
> Hope that makes the question more clearer.
> Thanks
OK, then I think you should try 6to4 addr.
The format is like b
On Sat, 11 Mar 2000, in a never-ending search for enlightenment, Ryan Thompson wrote:
> Jeffrey J. Mountin wrote to Ryan Thompson:
>
> > At 09:19 PM 3/10/00 -0600, Ryan Thompson wrote:
> > >Me as well...For at least a decade. I used to do it manually all the
> > >time, but had occasional glitche
On Sat, Mar 11, 2000 at 03:30:33PM -0500, Eric D. Futch wrote:
> I'm having some weird problems with PnP, I guess. I have a "SmartLink 56K
> Voice Fax Modem" that I just stuck into the computer. Before I added the
> PnP magic to src/sys/isa/sio.c, in the kernel messages just said unknown
> for i
Ok, I'm giving serious thought to ditching the Debian installation on this
drive and go with FreeBSD. I run FreeBSD on this machine already, but on a
smaller drive. Debian and Linux have been routinely irritating me. I'm used
to the traditional set of Unix tools, and the traditional command line
o
Not very helpful at this point; what I need is the time to attempt to
reproduce your situation. To be quite honest, since none of the BIOS,
RedHat nor FreeBSD can agree over the actual reported size of the array
coming from these controllers of yours, I'm rather inclined to think that
there'
On Sat, Mar 11, 2000 at 04:10:26PM -0500, Ted Sikora wrote:
> My problem is a little different. XFree86-4.0 loads
> fine looks great but the mouse does not work. There
> are no errors. I tried PS/2 , serial, etc same with
> them all. The pointer appears then moves to the upper
> right and dissa
I decided to grab the iso of 4.0-RC3 and do some installation testing,
since problems have plagued the previous releases and I wanted to do
my part to make sure that doesn't happen with 4.0. :-)
Initial installation from the ISO went flawlessly. My problems are
ocurring while using the post-inst
That was fixed days ago - get a more recent snap. :)
> Hi.
>
> I'm testing 2307-SNAP and I found that USA_RESIDENT is set to YES
> even if I installed from CD-ROMs with crypto distribution compiled
> from international crypto sources.
>
> How about adding something like following patch to s
# cat QUAKE | grep ^device | grep pnp
#
Attached is my kernel config.
--
Eric Futch New York Connect.Net, Ltd.
[EMAIL PROTECTED] Technical Support Staff
http://www.nyct.net (212) 293-2620
"Bringing New York The Internet Access It Deserves"
On Sat, 11 Mar 2000, Mark Ove
Hi,
I've updated my desktop system to -CURRENT (my laptop runs ok since
few months) : download and install the bin distrib, reboot then cvsup
and make world, new kernel and mergemaster.
All seems ok _except_ one thing : sometimes, my box seems
to be slw and freezed, the reason is explain
At 05:43 AM 3/11/00 -0800, David O'Brien wrote:
>On Fri, Mar 10, 2000 at 07:45:33PM -0600, Jeffrey J. Mountin wrote:
> >
> > Hopefully that "yet" will be "never" so one can boot sans keyboard and
> > later hook one up if need be.
>
>For me it cannot come soon enough. *FINALLY* the PC toy will act
powered by Symmetric MultiProcessor FreeBSD
New APSFILTER 5.2.0 and songs from our band -> http://www.freebsd.org/~andreas
Hi Søren,
I have a problem to install a self created FreeBSD 4.0-SNAP-2311
on my LAPTOP:
The last things I see on screen
pcib0: on motherboard
p
I was able to get it working through a small patch to the
scripts/configure file. Probably not the most optimal solution, but it
works until the port is updated:
--- configure Fri Mar 10 19:20:34 2000
+++ configure.2 Sat Mar 11 18:19:55 2000
@@ -197,7 +197,7 @@
echo "#define BuildXInputExt
The fix I applied to pwd_mkdb is an improvement over what was there
before i.e. nothing, but is a poor solution at the moment since it won't
work correctly on the alpha.
The following code snippet is OK on the i386 but on the alpha ULONG_MAX
is 64 bits and so is a totally wrong constant to check
Ugh... nevermind. Getting rid of the PNPBIOS option from the kernel
config got rid of all the unknown strangeness, although I still can't
explain it. The signal 11's only hit kdm, so I'm assuming that's a
different problem. Can someone commit the PnP magic for this modem or
should I just send-pr?
So my IPv4 address is 24.113.130.83 that in IPv6 would be
2002:240:113:130:083 ??
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
> Nawfal M Rouyan writes:
> Hi,
> I've installed XFree86 version 4 trough the ports
> collection
> but it won't start and I think it is because of the
> missing mouse module. Since I'm using lynx, I can't
> attached the /var/log/XFree86.0.log file for your
> reference. I can only paste
>> For NetBSD-current, I'll bring in cleaner 6to4 code (since netbsd is
>> not that close to the deadline).
>> please wait for a while...
>This is what I expected. I was just messing around some and was pleased
>that it didn't panic my machine.
Thanks. BTW, plea
"Jeffrey J. Mountin" wrote:
> You could say I reserve the right shoot myself in foot by swapping keyboards.
I think you've made it really clear with all of your many posts that
you want this option. On the other hand, some of us think it's
worthwhile to warn people that swapping keyboard
My colleague found these problems on a machine freshly installed with
RC3. The machines on the other end are mix of sunos 2.5,6,7 on
sparcs. Please flame me if this has already been discused.
Script started on Sun Mar 12 00:55:40 2000
bash-2.03$ slogin -v XXX
SSH Version OpenSSH-1.2.2, protoco
On Sat, 11 Mar 2000, Mathew Kanner wrote:
> debug: Received server public key (1152 bits) and host key (1024 bits).
> rsa_public_encrypt() failed
Are you using rsaref? rsaref can't handle keys longer than 1024 bits and
we're not allowed to fix it so it can by the terms of the rsaref license.
Si
> Are you using rsaref? rsaref can't handle keys longer than 1024 bits and
> we're not allowed to fix it so it can by the terms of the rsaref license.
> Since you're in Canada, you don't need rsaref and should be using the
> international version of openssl. See chapter 6.5 in the handbook for a
>
On Sat, 11 Mar 2000, Jordan K. Hubbard wrote:
> > Are you using rsaref? rsaref can't handle keys longer than 1024 bits and
> > we're not allowed to fix it so it can by the terms of the rsaref license.
> > Since you're in Canada, you don't need rsaref and should be using the
> > international vers
On Sat, 11 Mar 2000, Kris Kennaway wrote:
> I consider this a bug in openssh that it doesn't realise that it's using
> rsaref and give a helpful error message when it gets a key that is too
> long.
I'm also working on a patch to do just this..give me a few minutes :-)
Kris
In God we Trust
On Sat, 11 Mar 2000, Ryan Thompson wrote:
> The old 2-button 9-pin $5 serial Dexxa mice were really fun.. I used
> to buy the OEMs in bulk. They were a comfy little mouse, but, shine
> direct sunlight on them and the optical disc motion sensors wouldn't
> work. The cheap, thin plastic casing all
"F. Heinrichmeyer" <[EMAIL PROTECTED]> writes:
> I found no way to get kdm to work, it dumps core in a qt string find
> routine. wdm works kind of (the window manager menu is buggy but
> repairable).
I had the same problem. Someone else reported here that it works if
you compile kdm without opt
[EMAIL PROTECTED]>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.94.15i
In-Reply-To: Kris Kennaway's message [Re: RC3: problems with SSH] as of Sat, Mar 1
1, 2000 at 05:10:07PM -0800
Organization: SOCS, McGill University, Montreal, CANADA
Status: RO
Content-Length:
I've got a new machine that I was testing FreeBSD out on. I
had large problems with promise ata controller and fujistsu drives, a
red-herring on the promise site was that they can't run ata66. Turns
out that the last pci slot on the a-bit BE6-II doesn't work regularly
when the on-board u
On Sat, Mar 11, 2000 at 05:27:33PM -0500, Eric D. Futch wrote:
> # cat QUAKE | grep ^device | grep pnp
> #
>
> Attached is my kernel config.
>
Hmm, I saw exactly the same thing when I moved to -current and I was
certain that it was pnp0 that caused it, obviously not. Sorry for
wasting your time
On Sat, Mar 11, 2000 at 06:44:32PM -0500, Eric D. Futch wrote:
> Ugh... nevermind. Getting rid of the PNPBIOS option from the kernel
> config got rid of all the unknown strangeness,
Argh!, yes , that was it, PNPBIOS not ``device pnp0''. Close though,
only 3 letters out :)
--
Microsoft
On Sat, 11 Mar 2000, Mathew Kanner wrote:
> Finally a benefit to living in Canada! Anyway, I made the
> port in /usr/ports/security/rsaref. My mistake was thinking that it
> would look at my make.conf and get the right one. Sorry about that.
You shouldn't need/use rsaref. Use the libr
"Michael L. Imamura" wrote:
>
> I was able to get it working through a small patch to the
> scripts/configure file. Probably not the most optimal solution, but it
> works until the port is updated:
>
> --- configure Fri Mar 10 19:20:34 2000
> +++ configure.2 Sat Mar 11 18:19:55 2000
> @@ -197
The latest CTM delta for -CURRENT on ftp.freebsd.org is 4257 (March
6). Because all of the mirrors for CTM are in countries other than the US,
would there be any differences between the deltas they have and the ones
that ftp.freebsd.org should have? (I don't understand this crypto thing
all
In article <[EMAIL PROTECTED]>,
Paul Richards <[EMAIL PROTECTED]> wrote:
>
> I think we need a MAX_UID and a MAX_GID to perform checks like this.
> Anyone got any objections to adding them to /usr/include/limits.h ?
They must not go into . That header file is defined by
the ANSI/ISO C standard
Hi,
> So my IPv4 address is 24.113.130.83 that in IPv6 would be
> 2002:240:113:130:083 ??
No, no, because IPv6 address is printed in hex format each
2bytes separated by collon, so the 1st 6bytes will be,
2002:1871:8253:
and if printed in full 16bytes,
2002:1871:8253:-:::00
I haven't tried xfce, but I had some problems running Enlightenment 16.3,
all related to shared memory. I disabled shared pixmaps in my Imlib
configuration and that got rid of the random crashing, but is again not a
very optimal solution :) I'm guessing it's a problem with the current GTK
versi
On Sat, 11 Mar 2000 [EMAIL PROTECTED] wrote:
> The latest CTM delta for -CURRENT on ftp.freebsd.org is 4257 (March
> 6). Because all of the mirrors for CTM are in countries other than the US,
> would there be any differences between the deltas they have and the ones
> that ftp.freebsd.org sho
John Polstra wrote:
>
> In article <[EMAIL PROTECTED]>,
> Paul Richards <[EMAIL PROTECTED]> wrote:
> >
> > I think we need a MAX_UID and a MAX_GID to perform checks like this.
> > Anyone got any objections to adding them to /usr/include/limits.h ?
>
> They must not go into . That header file i
Ted Sikora wrote:
>
> My problem is a little different. XFree86-4.0 loads
> fine looks great but the mouse does not work. There
> are no errors. I tried PS/2 , serial, etc same with
> them all. The pointer appears then moves to the upper
> right and dissappers. I tried moving it...Mouse1, etc.
>
On Sun, Mar 12, 2000 at 02:30:46AM +, Cliff Rowley wrote:
> Two things, I know it's silly, but I might as well ask:
>
> 1) Did you install XFree86 4 over an old XFree86? If so, did you ask it
> specifically to make and install aout libraries (re: __Xglobal_lock) - the
> aout libraries arent
RSAREF can't handle RSA keys longer than 1024 bits (and we're not allowed
to fix it so that it can, by the terms of the RSAREF license). This is a
problem for OpenSSH, because it can't be used to interoperate with
servers (or clients) which use long keys. Currently it gives a very
non-helpful erro
On Fri, 10 Mar 2000, John Polstra wrote:
> This is still broken. I ran into it when upgrading a Feb. 29 -current
> system to today's -current. I didn't use make -j and I didn't take
> any shortcuts.
Okay, the problem is indeed caused by the fact that there's a dangling
symlink from des.h to op
Howdy,
Are there any plans by the FreeBSD team to add sendmail 8.10 to
FreeBSD-4.0, or is the sendmail release too late for this to happen?
TIA for any info.
Regards,
Chris Knight
Systems Administrator
AIMS Independent Computer Professionals
Tel: +61 3 6334 6664 Fax: +61 3 6331 7
On Sat, 11 Mar 2000, Kris Kennaway wrote:
> the fix isn't immediately obvious to me - make world doesn't seem to run a
> full 'make includes' prior to doing the perl thing (it just does 'make
Well, that was probably the stupidest thing I've said all day (I say the
fix isn't obvious and then proc
On Sun, 12 Mar 2000, Chris Knight wrote:
> Are there any plans by the FreeBSD team to add sendmail 8.10 to
> FreeBSD-4.0, or is the sendmail release too late for this to happen?
> TIA for any info.
I would say with release being a couple of days away it's too late. We've
already dela
71 matches
Mail list logo
