>> "Achim" == Achim Gratz writes:
> Achim Gratz writes:
>> That cannot work since the byte-compiler necessarily sees both branches
>> of the if clause.
> I've changed the advices to actually remove any arguments past the
> second from the argument list. That should allow you to c
>> "Achim" == Achim Gratz writes:
> Achim Gratz writes:
>> That cannot work since the byte-compiler necessarily sees both branches
>> of the if clause.
> I've changed the advices to actually remove any arguments past the
> second from the argument list. That should allow you to c
>> "Achim" == Achim Gratz writes:
> Uwe Brauer writes:
>> Oops I just saw you second message. This new version I can obtain via
>> git clone git://orgmode.org/org-mode.git
>> I presume.
> If your current version was also obtained via gi
>> "Achim" == Achim Gratz writes:
>>
>> when executed in Xemacs returns Xemacs, when executed in GNU emacs
>> returns GNUS.
> Yes, but the byte-compiler has to compile both branches, since the
> if is actually resolved at run-time. You'd need to use a
> compatibility macro to
itute???
- when trying to use gnus, some errors popped up, I attach the bug trace.
- when I try to open a org file or to fire up my favourite
org-preview-latex-fragment function another error pops up. Bug
trace attached.
Thanks
Uwe Brauer
org-bug-8.03-3
Description: Binary data
>> "Eric" == Eric S Fraga writes:
> Uwe Brauer writes:
>> Hello
>>
>> Thanks to Achim's change in org-compat, I could compile and load the new
>> orgmode, without the complain about the obsolete function stuff.
&g
>> "Eric" == Eric S Fraga writes:
> Uwe Brauer writes:
>> Hello
>>
>> Thanks to Achim's change in org-compat, I could compile and load the new
>> orgmode, without the complain about the obsolete function stuff.
&g
>> "Achim" == Achim Gratz writes:
> Uwe Brauer writes:
>> >> - 7.8.X had a file called org-exp.el. This file is now gone. What is
>> >> it substitute???
>>
>> > What functionality is it you need from that file?
>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
>>>> "Eric" == Eric S Fraga writes:
>>
>> > Uwe Brauer writes:
> (require 'ox)
> is the closest equivalent. But the exporter has changed so much th
- I tried to use org-submit-bug-report and received third error.
Any comments?
thanks
Uwe Brauer
org-8-bug-submit-bug
Description: Binary data
org-8-bug-preview
Description: Binary data
org-8-bug
Description: Binary data
>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
>> Hello
>>
> You need to set up auto-mode-alist in your init file:
> (add-to-list 'auto-mode-alist '("\\.org$" . org-mode))
Ok, I did this
&
>> "Nick" == Nick Dokos writes:
> so xemacs found an outline.el that did not define
> outline-previous-heading. Check which outline.el xemacs
> finds with M-x locate-library RET outline RET. It's probably
> a compiled file, but the corresponding outline.el should be
> in the same
>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
>> > The error is[fn:1]:
>>
>> I am sorry, this is also the fault of
>> gnus-dired-attach
>>
>> Which by default uses this type of attachment
>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
> Eric Fraga has been prolific in providing solutions to these problems
> today. In addition to the client side solution ("Use v instead of t")
> which solves the problem on the recipient
Hello
Is there a possiblity to hide text in a org file, such then it is not
displayed (or does not appear) in the odt file, I generated using
org-odt-export-to-odt?
thanks
Uwe Brauer
>> "Eric" == Eric S Fraga writes:
> Uwe Brauer writes:
>> Hello
> I'm not sure if I have misunderstood your question or not but you can
> easily exclude whole subtrees from export by, for instance:
> #+title: The title
> #+EXPORT_EXC
On 07/05/2013 07:40 PM, Eric S Fraga wrote:
#+begin_comment ... #+end_comment?
does not work, the odt file contains
#+begin_comment
my text
#+end_comment ?
the issue is I want to write say one paragraph in Spanish
and the next in German, again spanish then German, etc
but the odt file shou
>> "Suvayu" == Suvayu Ali writes:
> On Fri, Jul 05, 2013 at 09:26:22PM +0200, Uwe Brauer wrote:
>>
>> the issue is I want to write say one paragraph in Spanish
>> and the next in German, again spanish then German, etc
>> but th
Hi
I googled a bit but found no solution to the problem
of rotating a table such that
| 1 | 2 | 3 |
| 4 | 3 | 4 |
becomes
| 4 | 1 |
| 3 | 2 |
| 4 | 3 |
Thanks
Uwe Brauer
>> "Michael" == Michael Brand writes:
> Hi Uwe
> On Sun, Oct 20, 2013 at 10:12 PM, Uwe Brauer wrote:
>> | 1 | 2 | 3 |
>> | 4 | 3 | 4 |
>>
>> becomes
>>
>> | 4 | 1 |
>> | 3 | 2 |
>> | 4 | 3 |
>> "Michael" == Michael Brand writes:
> Hi Uwe
> On Sun, Oct 20, 2013 at 10:12 PM, Uwe Brauer wrote:
>> | 1 | 2 | 3 |
>> | 4 | 3 | 4 |
>>
>> becomes
>>
>> | 4 | 1 |
>> | 3 | 2 |
>> | 4 | 3 |
following lines
indicates.
Then this table is displayed L2R.
| פרויקט| לשמור| מגדל| פיזה| שעלה| 20| מיליון | אירו| השלים |
לאחרונה.|
I attach the odt file.
This seems a sort of bug?
Uwe Brauer
pisa-inter.odt
Description: application/vnd.oasis.opendocument.text
like this to start with.
Anybody has an idea?
Thanks
Uwe Brauer
>> "Michael" == Michael Brand writes:
Hi Michael,
>>
>> Anybody has an idea?
> This again I see in the category of "fun with combinations of
> reverse-region (to reverse lines) and org-table-transpose-table":
Maybe.
> Reverse row(s): Isolate the row(s) by adding an empty line
>> "Michael" == Michael Brand writes:
Here is a function but it just works for one row, if anybody wants to
generalise it for more rows...
(defun my-org-table-reverse-cells-in-row ()
"Simple function to reverse cells in one row."
(interactive)
(save-excursion
(end-of-line 1)
Hello
I am searching the docs in order to configure the odt-export function. I
cannot find anything concerning fonts.
I would like to have hebrew text exported using a particular font.
Can anybody give me a hint?
thanks
Uwe Brauer
>> "Jambunathan" == Jambunathan K writes:
Strangely enough, I don't see your answer on gmane.
> In LibreOffice,
> Right click on the table->Table->Text Direction->Right-to-Left.
Aha,
> Now, does what you see seem right to you?
Yes indeed it does!!
I fiddled around with a functi
>> "Jambunathan" == Jambunathan K writes:
> In LibreOffice,
> Right click on the table->Table->Text Direction->Right-to-Left.
> Now, does what you see seem right to you?
Sorry, my answer was premature.
Your solutions, converts the order of all rows, but this is not correct
in gen
org mailing list.
thanks
Uwe Brauer
now johnny smith told me:
,
|
| notwithstanding dave's comment, the odt seems either defective or
| incompatible with aoo (which may be aoo's fault as well). more
| specifically, the tables are quite lonely within their sections. they
| ha
>> "Jambunathan" == Jambunathan K writes:
> In LibreOffice,
> Right click on the table->Table->Text Direction->Right-to-Left.
I attach three files.
r2ltableOO.odt has been generated by OO, and displays the text as
intended.
r2ltableorg.org is the org file and displays the text as
>> "Jambunathan" == Jambunathan K writes:
Hi Jambunathan,
> Uwe
> I am venturing in to the wild here and it will take multiple iterations
> for me to even get a "feel" for what needs to be happen. I am not even
> sure what is right or wrong here. Anyways...
>
On 11/04/2013 07:08 AM, Jambunathan K wrote:
I suggest that you pass me an Org file, that has the right
bidi-paragraph-direction (as a local variable) and has the right set of
bidi markers.
Here are the attached files.
hebrew.ott
Description: application/vnd.oasis.opendocument.text-template
>> "Bastien" == Bastien writes:
Hi Bastien,
> Hi Uwe,
> Uwe Brauer writes:
> Don't forget to add such useful functions to
> http://orgmode.org/worg/org-hacks.html
I came to the conclusion, that the function is not useful, so I don't
think I
>> "Jambunathan" == Jambunathan K writes:
> Uwe
>> r2ltableorg.org is the org file and displays the text as
>> intended. However not all of the text was written in logical order by
>> GNU emacs, but copied from some other sources.
> I am venturing in to the wild here and it will
>> "Bastien" == Bastien writes:
> Hi Uwe,
> Uwe Brauer writes:
>> I never used this site you mentioned, how can I copy the code?
> Simply send me your public key and I'll give you access to the Worg
> git repository.
s/mime or (gn
>> "Bastien" == Bastien writes:
> Hi Uwe,
> Uwe Brauer writes:
>> I never used this site you mentioned, how can I copy the code?
> Simply send me your public key and I'll give you access to the Worg
> git repository.
&
ea what to do?
Uwe Brauer
test-cov.pdf
Description: Binary data
le-factor (expt text-scale-mode-step text-scale-mode-amount)))
(plist-put org-format-latex-options :scale (* 4.3 text-scale-factor
(add-hook 'text-scale-mode-hook 'update-org-latex-fragment-scale)
None of them worked for me.
Does somebody know a different one?
Thanks
Uwe Brauer
>>> "Uwe" == Uwe Brauer writes:
> Hello
> I am using GNU emacs 25.0.50, and 8.3.1.
> The png generated ny org-toggle-latex-fragment are too small for my
> taste.
> I found two solutions
> (defun update-org-latex-fragments ()
when the cursor is on the
org-table C-c C-c is bound to
org-ctrl-c-ctrl-c
Now I want to have that behavior in my org files. In a table C-c C-c
should be bound to org-ctrl-c-ctrl-c but outside I want to bind it to
another function.
How can I achieve this?
Thanks
Uwe Brauer
Hello
I have the following minimal example
:tangle yes
#+BEGIN_SRC emacs-lisp
(setq-default fill-column 79)
#+END_SRC
I put my cursor into the code block and execute C-c C-v t
and I obtain
Tangled 0 code blocks from new.org
C-c C-v f gives the same result.
What do I miss?
Thanks
Uwe
>>> "John" == John Kitchin writes:
> Try
> #+BEGIN_SRC emacs-lisp :tangle yes
> (setq-default fill-column 79)
> #+END_SRC
thanks works nicely!
>>> "Thomas" == Thomas S Dye writes:
> Aloha Uwe Brauer,
> Uwe Brauer writes:
>> Hello
>>
>> I have the following minimal example
>>
>> :tangle yes
>>
>> #+BEGIN_SRC emacs-lisp
>> (setq-default fill-column 79)
>> #+END_SRC
thanks works also nicely.
Hello
I have some tables in comment blocks like
#+begin_comment
| Col1 | Col2 |
|1 | Name1 |
|2 | Name2 |
|3 | Name3 |
#+end_comment
But within a comment org-ctrl-c-ctrl-c does not work. So I cannot
reformat the table. How can I enable it?
regards
Uwe Brauer
--close-template and obtain:
#+begin_comment
#+end_comment
Does anybody know about such a function?
Regards
Uwe Brauer
> On Tuesday, 8 Dec 2015 at 10:34, Uwe Brauer wrote:
> I don't. However, I find that using the easy templates (e.g. insert a src block, latex-insert-block, does the equivalent and better (in my opinion, of
> course ;-). There isn't an entry for comment blocks
> On Tue, 8 Dec 2015, Uwe Brauer wrote:
> Use an org src block and you will be able to edit natively via
> org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other
> respects.
For me in GNU emacs 25.0.50.1 and org 8.3.1 the following works
| Col1 | Col
> Uwe Brauer writes:
> You need to load ob-org.
Yes, ok I loaded it but
#+BEGIN_SRC org :exports none
| uwe | test | | |^ |
| hall | | | |
| | | | |
#+END_SRC
C-c C-c
Does *not* lead to
#+BEGIN_SRC org :exports none
| uwe | test | | | |
> Uwe Brauer writes:
> Indeed - org-at-table-p gives nil if the table is inside
> a comment or inside a source block (or inside any other block
> afaict).
Well, how could this behavior be changed? I found it quite cumbersome.
>>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
>> > Uwe Brauer writes:
>>
>> > Indeed - org-at-table-p gives nil if the table is inside
>> > a comment or inside a source block (or inside any other block
>
> Uwe Brauer writes:
> Well, I'm not an expert on org syntax but reading the comments of
> org-element.el, I see I was wrong about the other blocks: "greater
> elements" can contain other elements (e.g. tables). The list of
> &qu
>>> "Nicolas" == Nicolas Goaziou writes:
> Hello,
> Uwe Brauer writes:
>> The point is that I have emails which contains tables and I don't want
>> to send these tables. So one possibility is to use comment blocks and
>>
> Hello,
> Uwe Brauer writes:
> You can use drawers for that.
No I cannot, I just found out about drawers,
however they *are* exported, when calling org-mime-htmlize, so they
don't serve my needs.
Uwe Brauer
> Regards,
>>> "Nick" == Nick Dokos writes:
> Uwe Brauer writes:
>> > Hello,
>> > Uwe Brauer writes:
>>
>>
>> > You can use drawers for that.
>>
>> No I cannot, I just found out about drawers,
> On Tue, 8 Dec 2015, Uwe Brauer wrote:
> Sorry. You have to put the code into an edit buffer to be able to use
> native org mode edit commands.
I still do not understand what you mean by edit buffer, I copied
the lines below in the *scratch* buffer (or it could be a messa
> Uwe Brauer writes:
> OK - you can also select the drawers that you will (or will not) export.
> See the doc for the variable org-export-with-drawers (which is what is
> manipulated with the d: option above).
Silly question: is there any keybinding for inserting a
> Uwe Brauer writes:
> Not that I know of, but you can use
> (info "(org) Easy templates")
> to add a shortcut.
Great works nicely. Thanks
>>> "Eric" == Eric S Fraga writes:
> On Wednesday, 9 Dec 2015 at 08:45, Uwe Brauer wrote:
>> Really all these keys? : C-c ' C-c C-c C-c '
> Without the ":".
> the sequence means edit the block in that block's language (C-
e-map "\C-c\C-c"
(orgtbl-make-binding 'org-ctrl-c-ctrl-c 1002 "\C-c\C-c"
However when I put the cursor on the table and run C-c C-c it returns
user-error: C-c C-c can do nothing useful at this location
What is wrong? I am sure that worked before.
Uwe Brauer
>>> "Uwe" == Uwe Brauer writes:
> Hello
> I swear that usually worked in my latex files.
> Situation:
Sorry the problem was caused by these lines in my init file:
(add-hook
'orgtbl-mode-hook
(lambda ()
(org-defkey orgtbl-mode-map "
generates a ?
There are at least two solutions:
- use the format $<2016-02-24 Wed>$
- or «2016-02-24 Wed»
Now I used (customize-option (quote org-time-stamp-custom-formats))
and set it to ("«%m/%d/%y %a»" . "«%m/%d/%y %a %H:%M»")
but it had no effect so far.
Any comments?
Thanks
Uwe Brauer
latex :lend " \\hline"
| Name| Date |
| Joe Doe | «2016-02-24 Wed» |
\end{comment}
How can I obtain it?
Thanks
Uwe Brauer
>>> "Nicolas" == Nicolas Goaziou writes:
> Hello,
> Uwe Brauer writes:
>> This is the usual setting, but I would like to obtain the following
>>
>> % BEGIN RECEIVE ORGTBL test
>> \begin{longtabu}{|l|l|}
>> \hline
> Hello,
> Uwe Brauer writes:
> What is the value of `org-display-custom-times'?
Nil
> Regards,
thanks
Uwe
>>> "Nicolas" == Nicolas Goaziou writes:
> Hello,
> Uwe Brauer writes:
>> But I don't know how to obtain
>>
>> \begin{longtabu}{|l|l|}
> Like this:
> | / | <>| <> |
> | | hallo |
-time-stamp-custom-formats))
and set it to
("$«%d-%m-%Y %a»$" . "$«%d-%m-%Y %a %H:%M»$")
but I cannot get rid of the < >
Any comments?
Thanks
Uwe Brauer
> Hello,
> Uwe Brauer writes:
> I cannot reproduce it. I get
> \textit{\$«03-03-2016 jeu.»\$}.
> The "\\textit{%s}" comes from `org-latex-active-timestamp-format'.
You are right, I was in a latex file, using
orgtbl-insert-table-or-matrix
.html
But none of them worked for me the way I described it.
Any comments or help?
thanks
Uwe Brauer
BLFM: $1=@#
> Regards,
Yeah thanks the point is that one need to use
C-u C-u C-c C-c
Not C-c C-c
Sorry for the noise.
Uwe Brauer
\ hline\" :environment
tabular
|/|<>|
| | |
\\end{comment}
")
Does precisely what I want. Now I want the same behavior if I edit a
table in a org buffer and export it to latex.
Which variable needs to be set and how?
thanks
Uwe Brauer
> Hello,
> Uwe Brauer writes:
> IIUC you want to put a rule after every row in the table? If that's the
> case, the straightforward way to do it is to explicitly put the rule in
> your table:
> |/|<>|
> | | |
> |-+--|
> Hello,
> Uwe Brauer writes:
> IIUC you want to put a rule after every row in the table? If that's the
> case, the straightforward way to do it is to explicitly put the rule in
> your table:
> |/|<>|
> | | |
> |-+--|
&g
> Hello,
> Uwe Brauer writes:
> IIUC you want to put a rule after every row in the table? If that's the
> case, the straightforward way to do it is to explicitly put the rule in
> your table:
> |/|<>|
> | | |
> |-+--|
&g
simpler conversion?
Thanks
Uwe Brauer
README-bitbucket.md
Description: Binary data
README.md
Description: Binary data
* README
This README would normally document whatever steps are necessary to get
your application up and running.
** What is this repository for?
- Quick summary: Our cool
;|%f| %U|%A|" :prepend t))))
But it does not work.
Any suggestions?
Thanks
Uwe Brauer
>>> "Uwe" == Uwe Brauer writes:
> Hi
> I would like to one entry for the org-capture-templates
> which will prompt for the file I want to save the capture.
> So I tried
> (setq org-capture-templates
> '(
> ("G" &q
Hello
Does somebody know a tool which would allow to convert a (unix) mailbox
or a vm folder to the org-mode format?
Thanks
Uwe Brauer
h if I take that table in an org buffer and export it to
latex, then the math gets sourounded by \( \) as it should, but
org-radio-table fails.
What can I do? (You might point out that I should have used a matrix and
not used $ in the table, that is correct but does not help me here.
Uwe Brauer
On 03/24/2016 01:01 PM, Nicolas Goaziou wrote:
> Hello,
>
> Uwe Brauer writes:
>
>> Take the following radio table in a latex file
>>
>> % BEGIN RECEIVE ORGTBL test
>> % END RECEIVE ORGTBL test
>> \begin{comment}
>> #+ORGTBL: SEND test or
manager and follow the instructions for your .emacs
> file, and don't forget to put
I don't find these two package in the package manager, could you provide
a pointer, please?
Thanks
Uwe Brauer
reading results: (beginning-of-buffer)
Code block produced no output.
However the code can be executed in matlab giving
ans =
a + b
a - b
Any comments?
Thanks
Uwe Brauer
>>> "John" == John Kitchin writes:
> sometimes setting :results to raw or code can help.
> I occasionally have trouble when the results get interpreted as cons
> cells, and maybe some other things too (in other languages but i think
> it a general problem.)
You mean
#+BEGIN_SRC matl
>>> "Eric" == Eric S Fraga writes:
> On Friday, 1 Apr 2016 at 08:30, Uwe Brauer wrote:
>> You mean
>>
>> #+BEGIN_SRC matlab
>> syms a b
>> A=[a,b;b,a]
>> eig(A)
>> #+END_SRC
>>
>> #+R
>>> "Eric" == Eric S Fraga writes:
> I don't have MATLAB on the system I'm on at the moment but trying your
> (slightly modified) example with octave instead works:
Aha!
#+BEGIN_SRC matlab :results output
syms a b
A=[a,b;b,a]
eig(A)
#+END_SRC
This worked as well! Thanks!
Hello
I am looking for a sort of database I could use with orgmode. Anybody
has a suggestion? What's about recutils?
thanks
Uwe Brauer
>>> "Ken" == Ken Mankoff writes:
> On 2016-04-04 at 15:46, Uwe Brauer wrote:
>> I am looking for a sort of database I could use with orgmode. Anybody
>> has a suggestion? What's about recutils?
> Can you be more specific?
Well my firs
> Hi,
> On 04/04/2016 03:46 PM, Uwe Brauer wrote:
> I have been using recutils with orgmode for more than year - still
> learning of course. So far, my experience has been fine. I am still
> developing some sort of standard databases, e.g. one for contacts,
>>> "Jose" == Jose E Marchesi writes:
>> I have been using recutils with orgmode for more than year - still
>> learning of course. So far, my experience has been fine. I am still
>> developing some sort of standard databases, e.g. one for contacts,
>> another for finance type of recor
> Thanks. Could you please send me the mydate file otherwise that
> will not work (and I don't know enough recfiles syntax to cook
> up my own.
> Sure. This could be an example of a recfile:
Thanks that worked nicely!
>>> "Jose" == Jose E Marchesi writes:
>> 1) Using ob-rec.el (part of recutils)
>> #+begin_src rec :data mydata.rec :type milestone :fields ProjectID,Name
>> Year == 2014
>> #+end_src
> #+begin_src rec :data mydata.rec :type milestone :fields ProjectID,Name
> Year ==
org-table and
in this process things like splitting cells are lost.
So could org-export not call table-generate-source for either latex or
html export?
regards
Uwe Brauer
>>> "Nicolas" == Nicolas Goaziou writes:
> Hello,
> Uwe Brauer writes:
>> However when I try to export a org file with a table controlled by
>> table.el I run into a problem. I have to convert it to a org-table and
>> in this p
known issue?
thanks
Uwe Brauer
Hello
This must be completely trival, but I cannot find a solution in the
manual nor in google.
I would like to bind some key, say (super return) to a function which
would insert a simple item in a list.
(meta return) inserts in an org mode file, a heading.
However (meta return) in message mode
>>> "Adam" == Adam Porter writes:
> org-meta-return (bound to M-RET by default) does this when you're in a
plain
> list. If you're not in a plain list, it inserts a heading. So just put
the
> point in a list and it should do what you want.
I know this.
> If you want a key to bo
> Uwe Brauer writes:
> I've never felt the need: once I'm in a list, I use M- to add
> another item, but I always start the list with a dash and a space, typed
> explicitly: nothing to go wrong, nothing to remember. BTW, that last
> point is getting more
Hi
When I use org-export-dispatch, then a list of possible formats pop up
but odt is not among them. Only if I explicitly call
org-odt-export-to-odt
once, then this command pops up in the list. How
can I change this behaviour and have the odt export function in the
list??
Thanks
Uwe Brauer
> Uwe Brauer writes:
> Somewhere in your init files, put (require 'ox-odt). Then it will always
> be available. Take a look at the other ox-* files, many of them are
> useful enough to always load by default.
Thanks that worked fine!
to «Libreoffice», I changed that to «unoconv», but that did
not help.
Any suggestion?
thanks
Uwe Brauer
Hello
Maybe I misunderstood the function
org-readme-changelog-to-readme:
I thought I fire it up in a ChangeLog buffer and a README.org file is
generated, but that seems not to be the case. What do I miss?
Uwe Brauer
101 - 200 of 1267 matches
Mail list logo
