> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Monday, December 14, 2015 11:04 PM
> To: Liu, Jijiang
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] doc: announce ABI change for struct
> rte_eth_tunnel_flow
>
> 2015-12-09 13:37, Jijiang
>
> > -Original Message-
> > From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> > Sent: Monday, December 14, 2015 11:04 PM
> > To: Liu, Jijiang
> > Cc: dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH] doc: announce ABI change for struct
> > rte_eth_tunnel_flow
> >
> > 2015-12
> -Original Message-
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> Sent: Monday, December 14, 2015 11:10 PM
> To: Liu, Jijiang
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v3] doc: announce ABI change for struct
> rte_eth_conf
>
> > And tunneling packet encaps
Hi,
> -Original Message-
> From: Nelio Laranjeiro [mailto:nelio.laranjeiro at 6wind.com]
> Sent: Tuesday, November 10, 2015 12:48 AM
> To: dev at dpdk.org
> Cc: olivier.matz at 6wind.com; thomas.monjalon at 6wind.com; Mcnamara,
> John ; Lu, Wenzhuo
> Subject: [PATCH 2/2] doc: announce ABI
On 14 December 2015 at 21:00, Santosh Shukla wrote:
> Enable RTE_LIBRTE_VIRTIO_PMD for armv7/v8 and setting RTE_VIRTIO_INC_VEC=n.
> Builds successfully for armv7/v8.
>
> Signed-off-by: Santosh Shukla
> ---
> config/defconfig_arm-armv7a-linuxapp-gcc |6 +-
> config/defconfig_arm64-armv8
Dear All,
After seting up system boot parameters as shown below, the issue is
resolved now & we are able to successfully setup openvswitch netdev-dpdk
with vhostuser support.
_
Setup
> > Current buffer size are not enough for a few testpmd commands.
> >
> > Signed-off-by: Nelio Laranjeiro
> Acked-by: John McNamara
> Acked-by: Thomas Monjalon
> Acked-by: Olga Shern
Applied, thanks
> > Signed-off-by: Nelio Laranjeiro
> Acked-by: Wenzhuo Lu
> Acked-by: Thomas Monjalon
> Acked-by: Olga Shern
Applied, thanks
> > Signed-off-by: Jingjing Wu
> Acked-by: Wenzhuo Lu
> Acked-by: Helin Zhang
> Acked-by: Andrey Chilikin
Applied, thanks
> > Signed-off-by: Jingjing Wu
> Acked-by: Wenzhuo Lu
> Acked-by: Helin Zhang
> Acked-by: Thomas Monjalon
Applied, thanks
A rework was prepared by Marc Sune:
http://dpdk.org/ml/archives/dev/2015-October/026037.html
The goal is to retrieve the supported link speed of a device
and to allow 100G devices while having a consistent API.
Signed-off-by: Thomas Monjalon
---
doc/guides/rel_notes/deprecation.rst | 3 +++
1 fi
On Mon, Dec 14, 2015 at 11:58:42AM +0800, Peter Xu wrote:
> On Fri, Dec 11, 2015 at 01:22:23PM +0300, Pavel Fedin wrote:
> > BTW, it works, and it was my bad. openvswitch was configured incorrectly
> > on the other side, vhost port number was different for
> > some reason, while ruleset was the s
Hi Thomas,
I am preparing a v2 of this series where I will be accomodating some
more fields to be considered for filtering. However, if the overall
approach seems ok to everyone then, should I submit a separate patch
for this ABI change announcement ?
Thanks,
Rahul.
On Thursday, December 12/10/
Hello!
> I mean I do find that qemu_annouce_self composes an ARP
> broadcoast request, but it seems that I didn't catch it on
> the target host.
>
> Something wrong, or someting I missed?
To tell the truth, i don't know. I am also learning qemu internals on the fly.
Indeed, i see that it shou
On 12/14/2015 08:48 AM, Jijiang Liu wrote:
> In current codes, tunnel configuration information is not stored in a device
> configuration, and it will get nothing if application want to retrieve tunnel
> config, so I think it is necessary to add rte_eth_dev_tunnel_configure()
> function is to do
2015-12-15 14:10, Rahul Lakkireddy:
> Hi Thomas,
>
> I am preparing a v2 of this series where I will be accomodating some
> more fields to be considered for filtering. However, if the overall
> approach seems ok to everyone then, should I submit a separate patch
> for this ABI change announcement
On Tue, Dec 15, 2015 at 11:45:56AM +0300, Pavel Fedin wrote:
> Hello!
>
> > I mean I do find that qemu_annouce_self composes an ARP
> > broadcoast request, but it seems that I didn't catch it on
> > the target host.
> >
> > Something wrong, or someting I missed?
>
> To tell the truth, i don't
Hello!
> Note quite sure. I found Thibaut submitted a patch to send
> VHOST_USER_SEND_RARP request after migration is done months
> ago. Thibaut, would you please elaborate it a bit more what
> should be done on vhost-user backend? To construct a gratuitous
> ARP request and broadcast it?
By th
Acked-by: Olga Shern
-Original Message-
From: Thomas Monjalon [mailto:thomas.monja...@6wind.com]
Sent: Tuesday, December 15, 2015 9:21 AM
To: dev at dpdk.org
Cc: Marc Sune ; Olga Shern ;
Matej Vido
Subject: [PATCH] doc: announce ABI change for link speed
A rework was prepared by Marc
Fix various spellings in rst docs.
Signed-off-by: John McNamara
---
doc/guides/contributing/coding_style.rst | 2 +-
doc/guides/contributing/versioning.rst | 2 +-
doc/guides/cryptodevs/aesni_mb.rst | 2 +-
doc/guides/nics/bnx2x.rst
On Tue, Dec 15, 2015 at 04:23:24PM +0800, Yuanhan Liu wrote:
> On Mon, Dec 14, 2015 at 11:58:42AM +0800, Peter Xu wrote:
> > If ping to guest from outside, when the migration finishes on the
> > target side of qemu, qemu_self_announce() will be called.
>
> It's supposed to see some ARP requests if
Fix minor rst doc issues in the contributing/design.rst doc to correct
rendering of notes and code blocks.
Signed-off-by: John McNamara
---
doc/guides/contributing/design.rst | 37 +++--
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/doc/guides/co
On Tue, Dec 15, 2015 at 11:45:56AM +0300, Pavel Fedin wrote:
> To tell the truth, i don't know. I am also learning qemu internals on the
> fly. Indeed, i see that it should announce itself. But
> this brings up a question: why do we need special announce procedure in
> vhost-user then?
I have t
Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.
Signed-off-by: John McNamara
---
doc/guides/faq/index.rst| 2 --
doc/guides/freebs
> Subject: [dpdk-dev] [PATCH] doc: fix spellings in docs
>
> Fix various spellings in rst docs.
>
> Signed-off-by: John McNamara
> ---
> doc/guides/contributing/coding_style.rst | 2 +-
> doc/guides/contributing/versioning.rst | 2 +-
> doc/guides/cryptodevs/
> Subject: [dpdk-dev] [PATCH] doc: fix minor rst doc issues
>
> Fix minor rst doc issues in the contributing/design.rst doc to correct
> rendering of notes and code blocks.
>
> Signed-off-by: John McNamara
> ---
> doc/guides/contributing/design.rst | 37 +++--
>
> Subject: [dpdk-dev] [PATCH] doc: cleanup doc index files
>
> Remove **Contents** and |Today| from the rst doc index files since
> these are already added automatically to PDF files and are of
> little value to the Html files where the Contents is shown in a
> sidebar.
>
> Signed-off-by: John Mc
2015-12-15 10:18, Van Haaren, Harry:
> > Subject: [dpdk-dev] [PATCH] doc: fix spellings in docs
> >
> > Fix various spellings in rst docs.
> >
> > Signed-off-by: John McNamara
>
> Acked-by: Harry van Haaren
Applied, thanks
2015-12-15 10:29, Van Haaren, Harry:
> > Subject: [dpdk-dev] [PATCH] doc: fix minor rst doc issues
> >
> > Fix minor rst doc issues in the contributing/design.rst doc to correct
> > rendering of notes and code blocks.
> >
> > Signed-off-by: John McNamara
> > ---
> > doc/guides/contributing/desi
2015-12-15 10:36, Van Haaren, Harry:
> > Subject: [dpdk-dev] [PATCH] doc: cleanup doc index files
> >
> > Remove **Contents** and |Today| from the rst doc index files since
> > these are already added automatically to PDF files and are of
> > little value to the Html files where the Contents is sh
test_mp_secondary was initially added by mistake.
rte_snprintf has been removed.
Fixes: 9d41beed24b0 ("lib: provide initial versioning")
Fixes: 3185322809c1 ("eal: remove rte_snprintf")
Signed-off-by: Thomas Monjalon
---
doc/guides/sample_app_ug/exception_path.rst | 2 +-
doc/guides/sampl
The API has been removed but the symbols were still declared in the map.
Fixes: a421b86a4a02 ("ethdev: remove old flow director API")
Signed-off-by: Thomas Monjalon
---
lib/librte_ether/rte_ether_version.map | 8
1 file changed, 8 deletions(-)
diff --git a/lib/librte_ether/rte_ether_v
On Tue, Dec 15, 2015 at 08:21:14AM +0100, Thomas Monjalon wrote:
> A rework was prepared by Marc Sune:
> http://dpdk.org/ml/archives/dev/2015-October/026037.html
> The goal is to retrieve the supported link speed of a device
> and to allow 100G devices while having a consistent API.
>
> Signed-off
The faq refers to Linux*, with an asterisk, without any equivalent
note or footnote. This is a legacy from older versions of the docs.
This update removes it.
Signed-off-by: John McNamara
---
doc/guides/faq/faq.rst | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/do
On Tue, 15 Dec 2015 08:21:14 +0100
Thomas Monjalon wrote:
> A rework was prepared by Marc Sune:
> http://dpdk.org/ml/archives/dev/2015-October/026037.html
> The goal is to retrieve the supported link speed of a device
> and to allow 100G devices while having a consistent API.
>
> Signed-off-by:
Hi,
I know a bit about VFIO implementation, have been debugging IOMMU (intel)
problems, know how QEMU/KVM work about using legacy or vfio attached
devices, and I'm the maintainer of a DPDK PMD recently accepted upstream
which requires our particular UIO driver (not maintained upstream). So I
gues
Matej is aware of those changes (towards 100G) and we were discussing
this extension already. Great to see that this topic is moving on.
Jan
On Tue, 15 Dec 2015 11:56:47 +0100
Viktor Pu? wrote:
> CCing to Jan in case Matej is offline today - can you ack this?
>
> Best,
> Viktor
>
> > On 15 De
On 12/15/2015 12:47 PM, Thomas Monjalon wrote:
> The API has been removed but the symbols were still declared in the map.
>
> Fixes: a421b86a4a02 ("ethdev: remove old flow director API")
>
> Signed-off-by: Thomas Monjalon
> ---
> lib/librte_ether/rte_ether_version.map | 8
> 1 file cha
On Tue, Dec 15, 2015 at 11:05 AM, Peter Xu wrote:
> On Tue, Dec 15, 2015 at 11:45:56AM +0300, Pavel Fedin wrote:
> > To tell the truth, i don't know. I am also learning qemu internals on
> the fly. Indeed, i see that it should announce itself. But
> > this brings up a question: why do we need sp
On Tue, Dec 15, 2015 at 12:43 PM, Thibaut Collet
wrote:
>
>
> On Tue, Dec 15, 2015 at 11:05 AM, Peter Xu wrote:
>
>> On Tue, Dec 15, 2015 at 11:45:56AM +0300, Pavel Fedin wrote:
>> > To tell the truth, i don't know. I am also learning qemu internals on
>> the fly. Indeed, i see that it should a
Fixed FreeBSD Getting Started Guide rst layout to improve
rendering in PDF.
Signed-off-by: John McNamara
---
doc/guides/freebsd_gsg/build_dpdk.rst | 205 --
doc/guides/freebsd_gsg/build_sample_apps.rst | 158 ++--
doc/guides/freebsd_gsg/install_fr
Acked-by: Matej Vido
D?a 15.12.2015 o 08:21 Thomas Monjalon nap?sal(a):
> A rework was prepared by Marc Sune:
> http://dpdk.org/ml/archives/dev/2015-October/026037.html
> The goal is to retrieve the supported link speed of a device
> and to allow 100G devices while having a consistent API.
>
> Si
This patch updates the release notes to include the changes
made (by me), which were not appropriatly documented at the time.
Hence, this patch fixes a number of missing docs,
Fixes: e81a315e5dc5 ("ixgbe: add MAC short packet discard count to Rx errors")
Fixes: 48dd1a82a615 ("ixgbe: remove mac fau
2015-12-15 13:41, Panu Matilainen:
> On 12/15/2015 12:47 PM, Thomas Monjalon wrote:
> > The API has been removed but the symbols were still declared in the map.
> >
> > Fixes: a421b86a4a02 ("ethdev: remove old flow director API")
> >
> > Signed-off-by: Thomas Monjalon
> > ---
> > lib/librte_ethe
Hello!
> After a migration, to avoid network outage, the guest must announce its new
> location to the L2 layer, typically with a GARP. Otherwise requests sent to
> the guest arrive to the old host until a ARP request is sent (after 30
> seconds) or the guest sends some data.
> QEMU implementat
Hello!
I have a question regarding vhostuser. If we cannot bind to a socket, why do
we simply fail with error instead of just unlink()ing
the path before binding?
This causes a very annoying problem with ovs. After ovs is stopped (i use
supplied system integration), these sockets are not
rem
2015-12-15 11:12, John McNamara:
> The faq refers to Linux*, with an asterisk, without any equivalent
> note or footnote. This is a legacy from older versions of the docs.
> This update removes it.
>
> Signed-off-by: John McNamara
Applied, thanks
2015-12-15 11:53, John McNamara:
> Fixed FreeBSD Getting Started Guide rst layout to improve
> rendering in PDF.
>
> Signed-off-by: John McNamara
Applied, thanks
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Harry van Haaren
> Sent: Tuesday, December 15, 2015 12:11 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] doc: include ixgbe rx error changes
>
> This patch updates the release notes to include the change
> > This patch updates the release notes to include the changes made (by me),
> > which were not appropriatly documented at the time.
> > Hence, this patch fixes a number of missing docs,
> >
> > Fixes: e81a315e5dc5 ("ixgbe: add MAC short packet discard count to Rx
> > errors")
> > Fixes: 48dd1a82
> > A rework was prepared by Marc Sune:
> > http://dpdk.org/ml/archives/dev/2015-October/026037.html
> > The goal is to retrieve the supported link speed of a device
> > and to allow 100G devices while having a consistent API.
> >
> > Signed-off-by: Thomas Monjalon
> Acked-by: Olga Shern
> Acked-
2015-12-15 13:41, Panu Matilainen:
> On 12/15/2015 12:47 PM, Thomas Monjalon wrote:
> > The API has been removed but the symbols were still declared in the map.
> >
> > Fixes: a421b86a4a02 ("ethdev: remove old flow director API")
> >
> > Signed-off-by: Thomas Monjalon
[...]
>
> Good spotting. Wha
On Tue, Dec 15, 2015 at 12:47:47PM +0100, Thibaut Collet wrote:
> On Tue, Dec 15, 2015 at 12:43 PM, Thibaut Collet
> wrote:
>
> >
> >
> > On Tue, Dec 15, 2015 at 11:05 AM, Peter Xu wrote:
> >
> >> On Tue, Dec 15, 2015 at 11:45:56AM +0300, Pavel Fedin wrote:
> >> > To tell the truth, i don't kno
Fixed Linux Getting Started Guide rst layout to improve
rendering in PDF.
Signed-off-by: John McNamara
---
doc/guides/linux_gsg/build_dpdk.rst| 88 +-
doc/guides/linux_gsg/build_sample_apps.rst | 141 +
doc/guides/linux_gsg/enable_func.rst
On Tue, Dec 15, 2015 at 03:24:48PM +0300, Pavel Fedin wrote:
> Hello!
>
> > After a migration, to avoid network outage, the guest must announce its new
> > location to the L2 layer, typically with a GARP. Otherwise requests sent to
> > the guest arrive to the old host until a ARP request is sent
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Thomas Monjalon
> Sent: Sunday, December 13, 2015 7:23 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] releases scheduling
>
> Hi all,
>
> We need to define the deadlines for the next releases.
> During 2015, w
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Alex Williamson
> Sent: Friday, December 11, 2015 11:03 PM
> To: Vincent JARDIN; dev at dpdk.org
> Subject: Re: [dpdk-dev] VFIO no-iommu
>
> On Fri, 2015-12-11 at 23:12 +0100, Vincent JARDIN wrote:
> > Thanks T
Fix EAL usage to indicate that -n is, now, optional.
Signed-off-by: John McNamara
---
doc/guides/freebsd_gsg/build_sample_apps.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/guides/freebsd_gsg/build_sample_apps.rst
b/doc/guides/freebsd_gsg/build_sample_apps.rst
inde
Hello!
> > Wrong. I tried to unconditionally enforce it in qemu (my guest does
> > support it), and the
> link stopped working at all. I don't understand why.
>
> I'm wondering how did you do that? Why do you need enforece it in QEMU?
> Isn't it already supported so far?
I mean - qemu first
Hi Thomas,
On Tuesday, December 12/15/15, 2015 at 00:55:20 -0800, Thomas Monjalon wrote:
> 2015-12-15 14:10, Rahul Lakkireddy:
> > Hi Thomas,
> >
> > I am preparing a v2 of this series where I will be accomodating some
> > more fields to be considered for filtering. However, if the overall
> > ap
Commit 9cbae2aa64eb managed to break the only previously supported
case where a tag is used as a revision, due to git show output
differing between tags and other objects. The hash is on the last
line of the output in both cases though so just grab that.
Fixes: 9cbae2aa64eb ("scripts: support any
2015-12-15 19:21, Rahul Lakkireddy:
> Hi Thomas,
>
> On Tuesday, December 12/15/15, 2015 at 00:55:20 -0800, Thomas Monjalon wrote:
> > 2015-12-15 14:10, Rahul Lakkireddy:
> > > Hi Thomas,
> > >
> > > I am preparing a v2 of this series where I will be accomodating some
> > > more fields to be cons
On Tue, Dec 15, 2015 at 04:48:12PM +0300, Pavel Fedin wrote:
> Hello!
>
> > > Wrong. I tried to unconditionally enforce it in qemu (my guest does
> > > support it), and the
> > link stopped working at all. I don't understand why.
> >
> > I'm wondering how did you do that? Why do you need enfor
2015-12-15 13:34, John McNamara:
> Fixed Linux Getting Started Guide rst layout to improve
> rendering in PDF.
>
> Signed-off-by: John McNamara
Applied, thanks
2015-12-15 13:47, John McNamara:
> Fix EAL usage to indicate that -n is, now, optional.
>
> Signed-off-by: John McNamara
Applied, thanks
On Tue, Dec 15, 2015 at 03:41:23PM +0300, Pavel Fedin wrote:
> Hello!
>
> I have a question regarding vhostuser. If we cannot bind to a socket, why do
> we simply fail with error instead of just unlink()ing
> the path before binding?
I'm thinking you can't simply unlink a file given by a user
Current filtering support will be enhanced to accommodate support
for Chelsio T5 hardware filtering support.
Signed-off-by: Rahul Lakkireddy
Signed-off-by: Kumar Sanghvi
---
doc/guides/rel_notes/deprecation.rst | 8
1 file changed, 8 insertions(+)
diff --git a/doc/guides/rel_notes/dep
Replace "entries" by "queues", it clarifies the case.
Fixes: bd3cea78abd8 ("doc: announce ABI change for RETA configuration")
Signed-off-by: Nelio Laranjeiro
---
doc/guides/rel_notes/deprecation.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/guides/rel_notes/dep
On Tue, Dec 15, 2015 at 03:55:15PM +0200, Panu Matilainen wrote:
> Commit 9cbae2aa64eb managed to break the only previously supported
> case where a tag is used as a revision, due to git show output
> differing between tags and other objects. The hash is on the last
> line of the output in both cas
Hello!
> I'm thinking you can't simply unlink a file given by a user inside
> a libraray unconditionaly. Say, what if a user gives a wrong socket
> path?
Well... We can improve the security by checking that:
a) The file exists and it's a socket.
b) Nobody is listening on it.
> I normally writ
2015-12-15 09:16, Neil Horman:
> On Tue, Dec 15, 2015 at 03:55:15PM +0200, Panu Matilainen wrote:
> > Commit 9cbae2aa64eb managed to break the only previously supported
> > case where a tag is used as a revision, due to git show output
> > differing between tags and other objects. The hash is on th
+1 for Ubuntu version numbering
On Tue, Dec 15, 2015 at 3:37 PM, O'Driscoll, Tim
wrote:
>
> > -Original Message-
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Thomas Monjalon
> > Sent: Sunday, December 13, 2015 7:23 PM
> > To: dev at dpdk.org
> > Subject: [dpdk-dev] release
On Tue, Dec 15, 2015 at 01:41:53PM +0200, Panu Matilainen wrote:
> On 12/15/2015 12:47 PM, Thomas Monjalon wrote:
> >The API has been removed but the symbols were still declared in the map.
> >
> >Fixes: a421b86a4a02 ("ethdev: remove old flow director API")
> >
> >Signed-off-by: Thomas Monjalon
>
2015-12-15 19:40, Rahul Lakkireddy:
> Current filtering support will be enhanced to accommodate support
> for Chelsio T5 hardware filtering support.
>
> Signed-off-by: Rahul Lakkireddy
> Signed-off-by: Kumar Sanghvi
> ---
> doc/guides/rel_notes/deprecation.rst | 8
> 1 file changed, 8
> -Original Message-
> From: Stephen Hemminger [mailto:stephen at networkplumber.org]
> Sent: Monday, December 14, 2015 9:35 PM
> To: Ananyev, Konstantin
> Cc: Zhang, Helin; dev at dpdk.org; Tom Kiely
> Subject: Re: [PATCH] ixgbe: Discard SRIOV transparent vlan packet headers.
>
> On Mon
On 12/15/15, 7:37 AM, "dev on behalf of O'Driscoll, Tim" wrote:
>
>> -Original Message-
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Thomas Monjalon
>> Sent: Sunday, December 13, 2015 7:23 PM
>> To: dev at dpdk.org
>> Subject: [dpdk-dev] releases scheduling
>>
>> Hi all,
>>
In FreeBsd driver, the max frame size is changed to MTU, but not
keep the default value defined in DataSheet. When DPDK runs on that
NIC, the configured value is not expected.
This patch sets the max frame size to default when initialization.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Sig
Hello!
> No idea. Maybe you have changed some other configures (such as of ovs)
> without notice? Or, the ovs bridge interface resets?
I don't touch the ovs at all. Just shut down the guest, rebuild the qemu,
reinstall it, run the guest.
>
> BTW, would you please try my v1 patch set with abo
On Tue, Dec 15, 2015 at 2:18 PM, Yuanhan Liu
wrote:
> On Tue, Dec 15, 2015 at 12:47:47PM +0100, Thibaut Collet wrote:
> > On Tue, Dec 15, 2015 at 12:43 PM, Thibaut Collet <
> thibaut.collet at 6wind.com>
> > wrote:
> >
> > >
> > >
> > > On Tue, Dec 15, 2015 at 11:05 AM, Peter Xu wrote:
> > >
> >
Hello!
> After a migration, to avoid netwotk outage, all interfaces of the guest must
> send a packet to update switches mapping (ideally a GARP).
> As some interfaces do not do it QEMU does it in behalf of the guest by
> sending a RARP (his RARP is not forged by the guest but by QEMU). This is
This patch serie includes some fixes/enhancements to the mpipe driver.
1. Support native build on the TileGx platform;
Previously only cross build was supported.
2. Optimize the mpipe buffer return mechanism by introducing a return
pending counter and doing HW buffer return if pssible.
3. M
This submit updates the CROSS setting to support native build on
TileGx platform. It also enable the combined library by default.
Signed-off-by: Liming Sun
---
MAINTAINERS |3 ++-
config/defconfig_tile-tilegx-linuxapp-gcc |4
mk/arch/tile/rte.vars.mk
This submit has changes to optimize the mpipe buffer return. When
a packet is received, instead of allocating and refilling the
buffer stack right away, it tracks the number of pending buffers,
and use HW buffer return as an optimization when the pending
number is below certain threshold, thus save
Mpipe link structure is initialized in function mpipe_link_init().
Currently it's only called from the eth_dev_ops.dev_start, which
caused crashes when link mgmt APIs (like promiscuous_enable)
was called before eth_dev_ops.dev_start(). This submit fixed it
by calling mpipe_link_init() in rte_pmd_mp
+100 for the LTS
One of the bigger challenges for products using DPDK is that there is so
much change going in each release with very limited testing. Trying to even
remotely keep up is too risky. We end up back-porting various fixes and
enhancements to whatever version we are on (1.6rc2 currently
Coverity issue (CID 119254): Control flow issues (DEADCODE).
Fixes: 1a572499beb6 ("app/testpmd: setup DCB forwarding based on traffic class")
Signed-off-by: Jingjing Wu
---
app/test-pmd/config.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/app/test-pmd/config.c b/app/t
Hi Abhijeet,
If you answer below questions it will help me understand your problem.
What do you mean by DPDK instance?
Are you able to communicate with other VM's on the same compute node?
Can you check if the DHCP requests arrive on the controller node? (I'm assuming
this is at least compute+ c
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jingjing Wu
> Sent: Tuesday, December 15, 2015 3:43 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] app/testpmd: fix dead code
>
> Coverity issue (CID 119254): Control flow issues (DEADCODE).
>
> Fixes:
-Original Message-
From: Nelio Laranjeiro [mailto:nelio.laranje...@6wind.com]
Sent: Tuesday, December 15, 2015 10:15 PM
To: dev at dpdk.org
Cc: Zhang, Helin ; thomas.monjalon at 6wind.com; Lu,
Wenzhuo ; adrien.mazarguil at 6wind.com
Subject: [PATCH] doc: fix ABI announce change for RETA
-Original Message-
From: Wu, Jingjing
Sent: Tuesday, December 15, 2015 10:53 PM
To: dev at dpdk.org
Cc: Wu, Jingjing ; Zhang, Helin ; Dong, ShijieX
Subject: [PATCH] i40e: fix set max frame size to default
In FreeBsd driver, the max frame size is changed to MTU, but not keep the
defaul
This counter was left unmodified. Restore it in ixgbe_dev_stats_get.
The ierrors counter still includes imissed for ixgbe. This behaviour is
not consistent amongst all drivers. Another patch may be needed to unify
the meaning of the ierrors counter.
Fixes: 5e50ad1c1b63 ("ixgbe: add specific stats
> Replace "entries" by "queues", it clarifies the case.
>
> Fixes: bd3cea78abd8 ("doc: announce ABI change for RETA configuration")
>
> Signed-off-by: Nelio Laranjeiro
> Acked-by: Helin Zhang
Applied, thanks
> In FreeBsd driver, the max frame size is changed to MTU, but not keep the
> default value defined in DataSheet. When DPDK runs on that NIC, the
> configured value is not expected.
> This patch sets the max frame size to default when initialization.
>
> Fixes: 4861cde46116 ("i40e: new poll mode
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Pavel Fedin
> Sent: Tuesday, December 15, 2015 10:21 PM
> To: 'Yuanhan Liu'
> Cc: dev at dpdk.org; 'Ilya Maximets'; 'Dyasly Sergey'
> Subject: Re: [dpdk-dev] problem vhost-user sockets
>
> Hello!
>
> > I'm th
> From: Robin Jarry [mailto:robin.jarry at 6wind.com]
> Subject: [PATCH] ixgbe: restore imissed stat counter
>
> This counter was left unmodified. Restore it in ixgbe_dev_stats_get.
>
> The ierrors counter still includes imissed for ixgbe. This behaviour is
> not consistent amongst all drivers. A
On Tue, 2015-12-15 at 13:43 +, O'Driscoll, Tim wrote:
> > -Original Message-
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Alex
> > Williamson
> > Sent: Friday, December 11, 2015 11:03 PM
> > To: Vincent JARDIN; dev at dpdk.org
> > Subject: Re: [dpdk-dev] VFIO no-iommu
> >
> -Original Message-
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jingjing Wu
> Sent: Tuesday, December 15, 2015 4:23 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] i40e: fix unintended sign extension
>
> Coverity issue reported like
> CID 119268 (#1 of 1): Unintended
2015-12-15 16:41, Van Haaren, Harry:
> > From: Robin Jarry [mailto:robin.jarry at 6wind.com]
> > Subject: [PATCH] ixgbe: restore imissed stat counter
> >
> > This counter was left unmodified. Restore it in ixgbe_dev_stats_get.
> >
> > The ierrors counter still includes imissed for ixgbe. This beh
> Coverity issue reported like
> > CID 119268 (#1 of 1): Unintended sign extension
> > (SIGN_EXTENSION)sign_extension: Suspicious implicit sign extension:
> > vsi_id with type unsigned short (16 bits, unsigned) is promoted in vsi_id
> > << 23 to type int (32 bits, signed), then sign-extended to ty
> > Coverity issue (CID 119254): Control flow issues (DEADCODE).
> >
> > Fixes: 1a572499beb6 ("app/testpmd: setup DCB forwarding based on traffic
> > class")
> > Signed-off-by: Jingjing Wu
>
> Acked-by: John McNamara
Applied, thanks
1 - 100 of 105 matches
Mail list logo
