Jayapal Reddy Uradi"
> To: ""
> Sent: Wednesday, 20 August, 2014 5:05:31 AM
> Subject: Re: VRouter sets the same public IP on 2 interfaces
>
> Hi Nux,
>
> Can you please check /var/cache/cloud/cmdline for interfaces info.
> If that is correct then as part
ot;
>> To: "dev"
>> Sent: Tuesday, 19 August, 2014 6:14:31 PM
>> Subject: Re: VRouter sets the same public IP on 2 interfaces
>>
>> On Tue, Aug 19, 2014 at 1:12 PM, Nux! wrote:
>>
>>> Hi,
>>>
>>> I have 4 networks define
ot;
> Sent: Tuesday, 19 August, 2014 6:14:31 PM
> Subject: Re: VRouter sets the same public IP on 2 interfaces
>
> On Tue, Aug 19, 2014 at 1:12 PM, Nux! wrote:
>
> > Hi,
> >
> > I have 4 networks defined (public, guest, storage and mgmt). It looks like
> >
On Tue, Aug 19, 2014 at 1:12 PM, Nux! wrote:
> Hi,
>
> I have 4 networks defined (public, guest, storage and mgmt). It looks like
> the VR sets up two internal NIcs (eth2 and eth3) for connecting to the
> public network. It also sets the same IP address on them.
> Egress = Allow is also ignored a
uot;
> To: "dev" , "us...@cloudstack.apache.org"
>
> Sent: Tuesday, 19 August, 2014 6:02:16 PM
> Subject: RE: VRouter sets the same public IP on 2 interfaces
>
> Hi Nux,
>
> I may have encountered the same issue when using 4.3.0.1 with VMware +
> distributed
vSwitches.
Hope this helps.
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: Tuesday, 19 August 2014 9:41 PM
To: dev; us...@cloudstack.apache.org
Subject: Re: VRouter sets the same public IP on 2 interfaces
So the VR in the UI shows 3 NICs: isolated, control and public, bu
gs exactly?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
> From: "Nux!"
> To: "dev" , us...@cloudstack.apache.org
> Sent: Tuesday, 19 August, 2014 2:36:52 PM
> Subject: Re: VRouter sets the same public IP on 2 inter
1:25:21 PM
> Subject: Re: VRouter sets the same public IP on 2 interfaces
>
> Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why
> this is happening. Can't spot anything dodgy in the logs.
> Once I remove the SNAT and add it on the eth2 (which has the s
19 augustus 2014 14:25
> To: dev; us...@cloudstack.apache.org
> Subject: Re: VRouter sets the same public IP on 2 interfaces
>
> Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why
> this is happening. Can't spot anything dodgy in the logs.
> Once I remove the
Have you used the same address range for your public network as your management?
--
Ian
-Original Message-
From: Nux! [mailto:n...@li.nux.ro]
Sent: dinsdag 19 augustus 2014 14:25
To: dev; us...@cloudstack.apache.org
Subject: Re: VRouter sets the same public IP on 2 interfaces
Right, so
Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why this
is happening. Can't spot anything dodgy in the logs.
Once I remove the SNAT and add it on the eth2 (which has the same IP) then all
my egress rules start to work again.
I'll try to recreate the zone and hope this gli
11 matches
Mail list logo
