Hi, No, they are entirely different ranges and physical links.
-- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro ----- Original Message ----- > From: "Ian Southam" <isout...@schubergphilis.com> > To: "dev" <dev@cloudstack.apache.org>, us...@cloudstack.apache.org > Sent: Tuesday, 19 August, 2014 1:47:57 PM > Subject: RE: VRouter sets the same public IP on 2 interfaces > > Have you used the same address range for your public network as your > management? > > -- > Ian > > -----Original Message----- > From: Nux! [mailto:n...@li.nux.ro] > Sent: dinsdag 19 augustus 2014 14:25 > To: dev; us...@cloudstack.apache.org > Subject: Re: VRouter sets the same public IP on 2 interfaces > > Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why > this is happening. Can't spot anything dodgy in the logs. > Once I remove the SNAT and add it on the eth2 (which has the same IP) then > all my egress rules start to work again. > > I'll try to recreate the zone and hope this glitch goes away. > > > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > > ----- Original Message ----- > > From: "Nux!" <n...@li.nux.ro> > > To: "dev" <dev@cloudstack.apache.org>, us...@cloudstack.apache.org > > Sent: Tuesday, 19 August, 2014 12:12:31 PM > > Subject: VRouter sets the same public IP on 2 interfaces > > > > Hi, > > > > I have 4 networks defined (public, guest, storage and mgmt). It looks > > like the VR sets up two internal NIcs (eth2 and eth3) for connecting > > to the public network. It also sets the same IP address on them. > > Egress = Allow is also ignored and my VMs can't reach anything. > > > > Has anyone seen this before? I'm on 4.3 > > > > Thanks > > > > -- > > Sent from the Delta quadrant using Borg technology! > > > > Nux! > > www.nux.ro > > > > >
