I've added another zone and the problem is sadly very repeatable. :( -- Sent from the Delta quadrant using Borg technology!
Nux! www.nux.ro ----- Original Message ----- > From: "Nux!" <n...@li.nux.ro> > To: "dev" <dev@cloudstack.apache.org>, us...@cloudstack.apache.org > Sent: Tuesday, 19 August, 2014 1:25:21 PM > Subject: Re: VRouter sets the same public IP on 2 interfaces > > Right, so the SNAT on the VR is done on eth3 instead of eth2, not sure why > this is happening. Can't spot anything dodgy in the logs. > Once I remove the SNAT and add it on the eth2 (which has the same IP) then > all my egress rules start to work again. > > I'll try to recreate the zone and hope this glitch goes away. > > > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > > ----- Original Message ----- > > From: "Nux!" <n...@li.nux.ro> > > To: "dev" <dev@cloudstack.apache.org>, us...@cloudstack.apache.org > > Sent: Tuesday, 19 August, 2014 12:12:31 PM > > Subject: VRouter sets the same public IP on 2 interfaces > > > > Hi, > > > > I have 4 networks defined (public, guest, storage and mgmt). It looks like > > the VR sets up two internal NIcs (eth2 and eth3) for connecting to the > > public network. It also sets the same IP address on them. > > Egress = Allow is also ignored and my VMs can't reach anything. > > > > Has anyone seen this before? I'm on 4.3 > > > > Thanks > > > > -- > > Sent from the Delta quadrant using Borg technology! > > > > Nux! > > www.nux.ro > > > > >
