>Accelerite,
> >2055, Laurelwood Road, Santa Clara, CA 95054, USA
> >Phone: 1-408-216-7010, www.accelerite.com, @accelerite
> >
> >On 5/16/16, 6:25 PM, "Raja Pullela" wrote:
> >>Hi Indra,
> >>
> >>I will check this and get back.
> >
Dear all,
Is there an alternative solution for now where I can download below URL?
http://download.cloud.com/releases/2.2.0/eec2209b-9875-3c8d-92be-c001bd8a0faf.qcow2.bz2
It's the default CentOS 5.5 (64-bit) no GUI template for KVM. I checked and
the above copy is not yet on cloudstack.apt-get.e
e has performed upgrade from ACS version 4.2 to 4.7 before and able to
share your experience and give some advice and/or tips?
Thank you.
On Sat, Feb 6, 2016 at 8:01 PM, Indra Pramana wrote:
> Hi Wido,
>
> Good day to you, and thanks for your reply. Nice to hear from you again. :)
thank you.
Cheers.
On Sat, Feb 6, 2016 at 3:48 PM, Wido den Hollander wrote:
> Hi,
>
> > Op 5 februari 2016 om 17:24 schreef Indra Pramana :
> >
> >
> > Dear all,
> >
> > We are using CloudStack 4.2.0, KVM hypervisor and Ceph RBD for primary
> >
Dear all,
We are using CloudStack 4.2.0, KVM hypervisor and Ceph RBD for primary
storage. In the past one week, many of our KVM host agents would often be
disconnected from the management server, causing the VMs to go down because
of HA work. While we used to have host disconnection in the past, n
Dear all,
We are using CloudStack 4.2.0 with KVM hypervisor and Ceph RBD primary
storage.
Since earlier this month, we encountered a strange problem where we cannot
deploy new VM from any template which are newly created. Deploying VMs from
existing template still works.
This is a new problem we
Dear all,
Anyone has tried creating CentOS 7 OS template in CloudStack and
experiencing similar problem?
Thank you.
-ip-
On Wed, Sep 2, 2015 at 1:25 PM, Indra Pramana wrote:
> Dear all,
>
> I am using ACS 4.2.0 with KVM hypervisor. I am trying to create a CentOS 7
> template an
Dear all,
I am using ACS 4.2.0 with KVM hypervisor. I am trying to create a CentOS 7
template and everything is running fine except the CloudStack password
reset script template.
CentOS 7 is using systemd so I have created the required
/usr/lib/systemd/system/cloud-set-guest-password.service as f
Dear all,
I am using CloudStack version 4.2.0 with KVM hypervisor. I notice a strange
behaviour when an agent got disconnected from the management server and I
restarted the cloudstack-agent service to reconnect, it takes very long
time to reconnect. And most of the time, it will stop most -- if n
t; I think VR for VPC is NOT a problem...
>
> On 15 December 2014 at 13:13, Indra Pramana wrote:
> >
> > Dear all,
> >
> > We are using CloudStack 4.2.0 with KVM hypervisors.
> >
> > Is there a way to prevent our virtual routers (VRs) to be targeted by DNS
>
Dear all,
We are using CloudStack 4.2.0 with KVM hypervisors.
Is there a way to prevent our virtual routers (VRs) to be targeted by DNS
amplification attack? It seems that the DNS services on dnsmasq running on
the VRs are by default recursive, causing it to easily be targeted for DNS
amplificati
Hi Wido,
Can you elaborate more on what do you mean by the size of our cluster? Is
it because the cluster size is too big, or too small?
Thank you.
On Wed, Oct 1, 2014 at 4:28 PM, Wido den Hollander wrote:
>
>
> On 10/01/2014 09:21 AM, Indra Pramana wrote:
> > Dear all,
>
Dear all,
Anyone using CloudStack with Ceph RBD as primary storage? I am using
CloudStack 4.2.0 with KVM hypervisors and Ceph latest stable version of
dumpling.
Based on what I see, when Ceph cluster is in degraded state (not
active+clean), for example due to one node is down and in recovering
pr
nterval and extract.url.cleanup.interval. Any
advise?
Thank you.
On Sun, Sep 28, 2014 at 1:39 AM, Wido den Hollander wrote:
>
>
>
>
> > Op 27 sep. 2014 om 19:25 heeft Indra Pramana het
> volgende geschreven:
> >
> > Dear all,
> >
> > FYI, I managed
ward to your reply, thank you.
Cheers.
On Sun, Sep 28, 2014 at 12:49 AM, Indra Pramana wrote:
> Dear all,
>
> Apologise for sending quite a lot of emails tonight. Anyone knows if it's
> safe for me to update the keystore table on the database directly? Since
> the API call does
Dear all,
Apologise for sending quite a lot of emails tonight. Anyone knows if it's
safe for me to update the keystore table on the database directly? Since
the API call doesn't work.
Thank you.
On Sun, Sep 28, 2014 at 12:39 AM, Indra Pramana wrote:
> Only if I key in the c
n Sun, Sep 28, 2014 at 12:36 AM, Indra Pramana wrote:
> I tried to key in just "BEGIN CERTIFICATE\nEND CERTIFICATE" without the
> "-" and the content of the certificate itself. Same problem persists,
> it says parameter certificate is invalid, contains i
CATE END CERTIFICATE for parameter certificate
is invalid, contains illegal ASCII non-printable characters
Seems the issue was not actually on the certificate itself, but may be on
the API call handler?
Any advice is greatly appreciated.
On Sat, Sep 27, 2014 at 11:35 PM, Indra Pramana wrote:
SCII non-printable
characters
Any advice is greatly appreciated, since 30 Sep is just another 3 days...
On Sat, Sep 27, 2014 at 11:21 PM, Indra Pramana wrote:
> Hi Amogh,
>
> I tried again tonight, still the same. Not too sure why, is it something
> wrong with the certificate? But
Amogh Vasekar
wrote:
> Can you try using http://meyerweb.com/eric/tools/dencoder/
>
> Amogh
>
> On 9/22/14 4:36 AM, "Indra Pramana" wrote:
>
> >Dear all,
> >
> >I am following the instruction on this documentation to replace
> >realhostip.c
Dear all,
I am following the instruction on this documentation to replace
realhostip.com with my own domain.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Procedure+to+Replace+realhostip.com+with+Your+Own+Domain+Name
Everything is fine until I need to upload the root certificate via API
oudStack. I am not sure
> whether the tagging will be applicable for already deployed vms. You can
> give a try.
>
> -Sanjeev
>
> -Original Message-
> From: Indra Pramana [mailto:in...@sg.or.id]
> Sent: Monday, September 22, 2014 7:57 AM
> To: dev@cloudstack.
Dear all,
When I stop and then start back a guest VM, CloudStack will try to start it
back on the same hypervisor host where the VM was hosted previously.
Is it possible for me to start a guest VM on a specific other hypervisor
host?
Looking forward to your reply, thank you.
Cheers.
how the parameters used to make requests. Copy
> the sessionid parameter
>
> Amogh
>
> On 9/20/14 11:41 AM, "Indra Pramana" wrote:
>
> >Hi Abhisek and all,
> >
> >I tried to run the login API command via browser:
> >
> >
> https://x.x.x.x
nameAsia/Kuala_Lumpurblablablasomecodeblablabla=8.0something
How can I tell which one is the session key?
On Sun, Sep 21, 2014 at 2:19 AM, Indra Pramana wrote:
> Hi Abhisek,
>
> I checked on this documentation on login via API:
>
> http://cloudstack.apache.org/docs/api/apidocs-4.2
need to put the session key?
Thank you.
On Sun, Sep 21, 2014 at 1:39 AM, abhisek basu wrote:
> Please run the login api using the api key and signature, in return you
> will get the session key.
>
> Sent from my iPhone
>
> > On 20 Sep 2014, at 10:58 pm, "Indra P
, thank you.
Cheers.
On Sat, Sep 20, 2014 at 10:26 PM, abhisek basu wrote:
> Inline..
>
> Sent from my iPhone
>
> > On 20 Sep 2014, at 7:50 pm, "Indra Pramana" wrote:
> >
> > Dear all,
> >
> > I am using CloudStack 4.2.0 and I am following t
Dear all,
I am using CloudStack 4.2.0 and I am following this procedure to change
console proxy to use our own domain:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/Procedure+to+Replace+realhostip.com+with+Your+Own+Domain+Name
On this step:
Uploading root certificate API call. Thi
On Sat, Aug 16, 2014 at 9:50 AM, Indra Pramana wrote:
> Dear all,
>
> Good day to all of you.
>
> I am using CloudStack 4.2.0 and KVM hypervisor.
>
> Suddenly our password reset function doesn't work anymore. I logged in
> into the virtual router and found these mess
Dear all,
Good day to all of you.
I am using CloudStack 4.2.0 and KVM hypervisor.
Suddenly our password reset function doesn't work anymore. I logged in into
the virtual router and found these messages on /var/log/messages:
Aug 16 01:43:04 r-2606-VM cloud: Process /opt/cloud/bin/serve_password.
t; you are able to access the VR from host with 3922 port and 8250.
>
> If not there is no communication between the host and the VR.
>
> Regards
> Vihar K
> On Jul 22, 2014 8:59 AM, "Indra Pramana" wrote:
>
> > Dear all,
> >
> > Suddenly I am not
Dear all,
Suddenly I am not able to create new VMs on my zone. The error message I
found on management-server.log:
2014-07-22 11:25:51,632 INFO [cloud.vm.VirtualMachineManagerImpl]
(Job-Executor-3:job-17146 = [ b780cd9c-2d0b-499f-b396-269064995e30 ])
Unable to contact resource.
com.cloud.excepti
nternet. It might be resolving the queries from external DNS
> server.
>
> If you are not able to resolve the names from VR, check if the DNS service
> is running properly for the IP which act as a DNS server.
>
> Regards
> Vihar
> On Jul 21, 2014 10:19 AM, "Indra Pramana&q
both by commenting out vr ip and not, in
> > resolv.conf, you may see the difference.
> >
> > "Yes, if I remove or comment out the first nameserver entry for the
> > VR's IP, and only leaving 8.8.8.8 and 8.8.4.4, guest VMs will be
> > running fine and will
or the VR's
> > IP, and only leaving 8.8.8.8 and 8.8.4.4, guest VMs will be running fine
> > and will be able to resolve domains properly."
> >
> >
> > Santhosh
> >
> > From: Indra Pramana [in...@sg.or.id
t; List running ports as well on VR, do a telnet to dns port on router from
> guest vm to verify for its response.
>
> Santhosh
> ________
> From: Indra Pramana [in...@sg.or.id]
> Sent: Sunday, July 20, 2014 1:06 PM
> To: us...@cloudstack.apache.org
debug, and try to see if something interesting
>appears in dnsmasq.log.
>
>
>
>
> On Sun, Jul 20, 2014 at 2:06 PM, Indra Pramana wrote:
>
> > Hi Rafael,
> >
> > Good day to you, and thank you for your reply.
> >
> > Can't find anything wron
0, 2014 at 11:26 PM, Rafael Weingartner <
rafaelweingart...@gmail.com> wrote:
> Have you taken a look at dnsmasq.log in the VR ?
> What do you mean with not responding? The addresses are not being resolved
> to ip addresses?
>
>
> On Sun, Jul 20, 2014 at 11:53 AM, In
Dear all,
All our guest VMs are having our virtual router (VR)'s IP address on
/etc/resolv.conf. In the past two weeks, I just realised that the DNS
service on the VR is not working, and doesn't respond to DNS queries from
the DNS clients on the guest VM.
I have tried to stop and start back the V
Dear all,
We are using CloudStack 4.2.0 and KVM hypervisor. We are based in
Singapore, GMT +0800.
Recently we had some issues whenever a Windows-based guest VM under
CloudStack is being restarted, the time will move behind by 8 hours. For
example, if a VM was rebooted at 8am Singapore time, after
wrote:
> Yes, it looks as though the two machines are running different
> versions of qemu/libvirt, as the destination doesn't support the
> machine type that the VM has defined in it's XML on the source host.
>
> On Fri, Apr 18, 2014 at 3:43 PM, Nux! wrote:
> > On
Dear all,
I am using CloudStack 4.2.0 and KVM hypervisor. I just provisioned a new
KVM host and I am able to add the host into the zone/cluster, it's up and
routing. This new host is using a different (newer) type of server, but
using the same type of CPUs as per CloudStack's requirements on KVM h
Hi Wei Zhou,
Yes, I am using version 4.2.0. Any known bug related to usage server on
this version?
Looking forward to your reply, thank you.
Cheers.
On Wed, Feb 5, 2014 at 3:25 PM, Wei ZHOU wrote:
> Are you working on 4.2.0?
>
>
> 2014-02-05 Indra Pramana :
>
> &g
Hi,
When I installed CloudStack, I also installed the CloudStack usage server
and the service seems to be running fine, I can stop and start the service
and the status is running.
===
# service cloudstack-usage restart
* Stopping CloudStack Usage Monitor cloudstack-usage[
OK
same --
it's normal to bring in better servers over time. Please CMIIW.
Will try ordering the server now and will update again if I encounter
further issues. Thanks!
Cheers.
On Thu, Jan 30, 2014 at 5:45 PM, Nux! wrote:
> On 30.01.2014 08:57, Indra Pramana wrote:
>
>> Hi,
>
Hi,
It's time for me to add new KVM hypervisor host into our CloudStack and I
read these requirements:
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.2.0/html/Installation_Guide/hypervisor-kvm-install-flow.html
===
- Within a single cluster, the hosts must be of the same distrib
Hi,
I am not able to add a new VM instance through CloudStack because the
number of VMs in my KVM hypervisor hosts have reached 50.
Is there a way to increase the limit? I can't seem to find it on the Global
Settings.
===
2013-12-25 06:02:20,995 DEBUG [cloud.capacity.CapacityManagerImpl]
(Job-E
oot cause of the problem, which
in turns affect the inability of creating/registering templates/ISO and
backup snapshot. Any advice on this is greatly appreciated!
Looking forward to your reply, thank you.
Cheers.
On Tue, Dec 3, 2013 at 9:14 PM, Indra Pramana wrote:
> Dear all,
>
&g
Dear all,
I am running CloudStack version 4.2.0 with KVM hypervisor, Ceph RBD primary
storage and NFS secondary storage.
Since yesterday, I am not able to create/register a new template. Normally
I would be converting a root-disk volume into a template. In this case, the
process of creating the t
Dear all,
On CloudStack GUI, under Infrastructure > Secondary Storage, I remember we
used to have a proper name for each secondary storage. However, after the
upgrade to CloudStack 4.2.0, the name disappears and it now becomes the ID
like this:
NameURLProviderQuickviewc02da448-b9f4-401b-b8d5-83e8
Dear all,
I am using CloudStack 4.2.0, KVM hypervisors, Ceph RBD primary storage and
NFS secondary storage.
I tried to change the storage.overprovisioning.factor from 1 to 2 under
Global Settings, and it doesn't seem to work on my primary storage. The
total amount of disk space seems to be remain
Dear all,
Any documentation on how to enable SSL (https) for Cloudstack 4.2.0
management server? I am using Ubuntu 12.04.2. I tried to follow the
instruction here, is it still valid?
http://support.citrix.com/article/CTX132008
I have managed to come to the step of creating the PKS12 format keyst
Dear all,
Wondering if anyone can advise on this? Or am I the only one who seem to
having this problem? :)
Looking forward to your reply, thank you.
Cheers.
On Wed, Oct 9, 2013 at 5:52 PM, Indra Pramana wrote:
> Dear all,
>
> Anyone can advise on this?
>
>
> Looking for
Dear all,
We are using CloudStack 4.2.0, KVM hypervisors and Ceph RBD primary storage.
We are able to create a volume snapshot of a VM instance's root-disk, and
convert the snapshot into a template. However, we are not able to create a
new VM instance based on the template.Error messages on both
;> storage?
>>
>>
> Not sure, but that's what the broken setting is for.
>
> I don't think the problem here is the code, but it's the hypevisor which
> isn't able to keep up.
>
> Some throttling might be useful here, but the code itself isn't
Dear all,
I am reading the documentation on the steps in building DEB packages for
CloudStack 4.2.0:
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.2.0/html/Installation_Guide/sect-source-builddebs.html
and compare it with the steps on the earlier version (e.g. 4.1.1):
http://cloud
orage?
(2) What would be the impact to CloudStack operations if we leave the
snapshots on primary storage without copying them to secondary storage? Are
we still able to do restoration from the snapshots kept in the primary
storage?
Looking forward to your reply, thank you.
Cheers.
On Wed, Oct 9
Dear all,
What does "dynamically scalable" means on a VM instance or a template?
Looking forward to your reply, thank you.
Cheers.
Dear all,
Anyone can advise on this?
Looking forward to your reply, thank you.
Cheers.
On Mon, Oct 7, 2013 at 9:49 AM, Indra Pramana wrote:
> Dear all,
>
> After upgrading to CloudStack 4.2.0, I am not able to reboot a VM
> instance. Error message: "Unable to find service
0 16777216
net.core.wmem_max = 16777216
net.core.rmem_max = 16777216
net.core.wmem_default = 65536
net.core.rmem_default = 87380
net.core.netdev_max_backlog = 3
(3) Try to disable RBD snapshot copying from primary to secondary storage
by setting this global Cloudstack configuration:
snapshot.backup.
ppreciated.
Looking forward to your reply, thank you.
Cheers.
On Mon, Oct 7, 2013 at 11:03 PM, Indra Pramana wrote:
> Dear all,
>
> I also found out that when the RBD snapshot is being run, the CPU
> utilisation on the KVM host will be shooting up very high, which might
> explai
script that does the
> resize only supports resizing qcow2 files and CLVM volumes.
>
> Best regards,
> Kirk
>
> On 10/06/2013 06:42 PM, Indra Pramana wrote:
> > Dear Marcus, Kirk and all,
> >
> > Any further recommendations on how can I troubleshoot on this matter t
run on the VM running on that host, the
host's CPU utilisation will be higher than usual? How can I limit the CPU
resources used by the snapshot?
Looking forward to your reply, thank you.
Cheers.
On Mon, Oct 7, 2013 at 7:18 PM, Indra Pramana wrote:
> Dear all,
>
> I did
Dear all,
I did some tests on snapshots since it's now supported for my Ceph RBD
primary storage in CloudStack 4.2. When I ran the snapshot for a particular
VM instance earlier, I noticed that this has caused the host (where the VM
is on) becomes disconnected.
Here's the excerpt from the agent.lo
Dear all,
After upgrading to CloudStack 4.2.0, I am not able to reboot a VM instance.
Error message: "Unable to find service offering: [SOME-RANDOM-NUMBER]
corresponding to the vm". This affects all the VM instances that I want to
reboot.
Any idea what could be the cause of the problem? Seems tha
Dear Marcus, Kirk and all,
Any further recommendations on how can I troubleshoot on this matter to
pinpoint the cause of the inability to resize the disk, and to find the
solution to the problem?
Looking forward to your reply, thank you.
Cheers.
On Fri, Oct 4, 2013 at 3:30 PM, Indra Pramana
"path" field for the
> virtual disk in the volumes table).
>
> Best regards,
> Kirk
>
> On 10/03/2013 03:47 PM, Marcus Sorensen wrote:
> > What primary storage are you using? Any errors in agent log?
> > On Oct 3, 2013 3:16 PM, "Indra Pramana" wro
Dear all,
After CloudStack upgrade to 4.2.0, the network speed to our VM instances is
very slow and seems to be limited to 2 Mbps for both ingress and egress
traffic for each instance. It seems that there's some network rate limiting
which didn't take effect on CloudStack version 4.1.1 or below, b
f you can.
>
> Look at those two things and let us know
>
> On Thu, Oct 3, 2013 at 2:33 PM, Indra Pramana wrote:
> > Dear all,
> >
> > After upgrading to 4.2.0, I tried to resize a data disk of a VM instance
> > from 20 GB to 60 GB, through the Cloudstack GUI. The UI r
Dear all,
After upgrading to 4.2.0, I tried to resize a data disk of a VM instance
from 20 GB to 60 GB, through the Cloudstack GUI. The UI reports that the
resize was successful, and that the data disk is now showing 60 GB instead
of 20 GB. However, when I check the actual disk on the VM, it seems
ould be written to from the kvm host unless you were doing backups or
> snapshots.
>
> On Thu, Oct 3, 2013 at 12:03 PM, Indra Pramana wrote:
> > Hi Marcus,
> >
> > It happens randomly, mounting fails, and then / gets filled. I suspect
> this
> > oc
t isn't, at least.
>
>
> On Thu, Oct 3, 2013 at 11:45 AM, Indra Pramana wrote:
> > Hi Marcus and all,
> >
> > I also find some strange and interesting error messages from the libvirt
> > logs:
> >
> > http://pastebin.com/5ByfNpAf
> >
> >
Hi Marcus and all,
I also find some strange and interesting error messages from the libvirt
logs:
http://pastebin.com/5ByfNpAf
Looking forward to your reply, thank you.
Cheers.
On Fri, Oct 4, 2013 at 1:38 AM, Indra Pramana wrote:
> Hi Marcus,
>
> Good day to you, and thank you f
help?
Looking forward to your reply, thank you.
Cheers.
On Fri, Oct 4, 2013 at 12:24 AM, Dean Kamali wrote:
> have you looked at storage over-provisioning settings ??
>
>
> On Thu, Oct 3, 2013 at 11:53 AM, Indra Pramana wrote:
>
> > Dear all,
> >
> > We f
up, we only have 1-2 hours left to resolve the problem, otherwise we
will be forced to revert back to 4.1.1 (for the fourth time). :(
Urgently looking forward to your reply, thank you.
Cheers.
>
> On Thu, Oct 3, 2013 at 9:53 AM, Indra Pramana wrote:
> > Dear all,
> >
> >
;
> >> I managed to fix the VRs issue by destroying the routers and restarting
> >>the
> >> networks associated to the routers.
> >>
> >> Only left is the CPVM, I am not able to stop/destroy it. Any advise?
> >>
> >> Looking forward
Dear all,
We face a major problem after upgrading to 4.2.0. Mounting from KVM hosts
to secondary storage seems to fail, every time a new VM instance is
created, it will use up the / (root) partition of the KVM hosts instead.
Here is the df result:
root@hv-kvm-02:/home/indra# df
Filesystem
Dear all,
I managed to fix the VRs issue by destroying the routers and restarting the
networks associated to the routers.
Only left is the CPVM, I am not able to stop/destroy it. Any advise?
Looking forward to your reply, thank you.
Cheers.
On Thu, Oct 3, 2013 at 8:16 PM, Indra Pramana
Dear all,
I am now in the progress of upgrading my CloudStack from 4.1.1 to 4.2.0.
Running cloudstack-sysvmadm can restart the SSVM, but failed to restart the
CPVM and all the VRs.
[1] 3152
root@cs-mgmt-01:~/backup/20131003# tail -f sysvm.log
nohup: ignoring input
/usr/bin/cloudstack-sysvmad
Hi,
I encountered the problem before, this is because for some reason, SSVM is
not able to mount to your NFS server. Try to SSH into the SSVM and then run
mount command to try whether you can mount manually. If cannot, then need
to investigate further.
HTH.
Thank you.
On Thu, Oct 3, 2013 at 6:
The steps are correct.
> Please follow the steps and let me know if you need any help.
>
> This issue got fixed in 4.2-forward branch with this commit:
> 38bbfdc89a50bbb9464700d202d1cfa7b7955953
>
> --Sanjay
>
> > -Original Message-
> > From: Indra Pramana [mail
.
Cheers.
On Thu, Oct 3, 2013 at 11:31 AM, Alena Prokharchyk <
alena.prokharc...@citrix.com> wrote:
> Hi Indra,
>
> Please see inline.
>
> -alena.
>
> On 10/2/13 8:21 PM, "Indra Pramana" wrote:
>
> >Hi Alena,
> >
> >
> >Good da
o fix the count. For that, you have
> to execute the API updateResourceCount. Here is the example:
>
>
> http://localhost:8096/?command=updateResourceCount&account=admin&domainId=1
>
> -Alena.
>
> From: Indra Pramana
> Reply-To: "dev@cloudstack.
t; > Environment: CentOS 6.3 64bit
> > > Reporter: Naoki Sakamoto
> > > Assignee: edison su
> > > Attachments: 20130906_HA_SystemVM_Migration_OK_But_UserVM_NG.zip,
> > 20130909_HA_UserVM_Migration_NG.zip
> > >
> > >
> > > 1. We made one of KVM Host Power OFF b
Hi Wei Zhou,
Thanks for your e-mail.
Do you have any recommendation or suggestion on how we can resolve the
problem? I am not a CloudStack developer (just a normal user) so we are at
loss on how we can resolve this issue. We are not able to upgrade to 4.2.0
because of this new problem, after we m
ply, thank you.
Cheers.
On Wed, Oct 2, 2013 at 4:26 PM, Wei ZHOU wrote:
> ConfigurationServerImpl will insert missing records to resource_count table
> at management server startup.
> It is strange you meet some issues others do not meet.
>
>
> 2013/10/2 Indra Pramana
>
&
e the command show grants;
> and post me the results?
>
>
> 2013/10/2 Indra Pramana
>
> > Hi Rafael,
> >
> > I believe the upgrade script is run by 'cloud' user, correct? By default
> > full permission to the 'cloud' user has been given, and
are using to run the queries,
> or simple try to change the DEFINER statement to something like:
> DEFINER=CURRENT_USER
>
>
> 2013/10/2 Indra Pramana
>
> > Hi Rafael,
> >
> > May I know how did you resolve the problem? Do we need to manually grant
> > supe
rote:
> I had the exactly same problem when I was backing up my CS database on a
> Amazon RDS.
> There was a problem with some DEFINER command generated by the mysqldump.
>
>
> 2013/10/2 Indra Pramana
>
> > Hi Rafael,
> >
> > What I did is just to setup a
database on Amazon
> RDS?
>
>
> 2013/10/2 Indra Pramana
>
> > Dear all,
> >
> > I tried to simulate upgrading the database from Cloudstack 4.1.1 to 4.2.0
> > on my test environment and getting below error message:
> >
> > MySQLSyntaxErrorExcept
Dear all,
I tried to simulate upgrading the database from Cloudstack 4.1.1 to 4.2.0
on my test environment and getting below error message:
MySQLSyntaxErrorException: Access denied; you need (at least one of) the
SUPER privilege(s) for this operation
Anyone can advise what super privilege is req
imesh
>
> > -----Original Message-
> > From: Indra Pramana [mailto:in...@sg.or.id]
> > Sent: Tuesday, October 01, 2013 11:06 AM
> > To: dev@cloudstack.apache.org; us...@cloudstack.apache.org
> > Subject: Re: Unable to create instance after upgrading to CloudStack
On Wed, Oct 2, 2013 at 12:49 AM, Indra Pramana wrote:
> Dear all,
>
> I am having problems of unable to create new instances after upgrading to
> 4.2.0. The error message is:
>
> Failed to increment resource count of type primary_storage for account id=2
>
> Excerpt from ma
Dear all,
I am having problems of unable to create new instances after upgrading to
4.2.0. The error message is:
Failed to increment resource count of type primary_storage for account id=2
Excerpt from management-server.log:
2013-10-02 00:40:57,770 DEBUG [cloud.api.ApiServlet]
(catalina-ex
r column (on an existing table) I need to delete?
Looking forward to your reply, thank you.
Cheers.
On Tue, Oct 1, 2013 at 9:25 PM, Indra Pramana wrote:
> Dear all,
>
> I tried to perform another upgrade today with Abhinav's assistance, and
> right now I am not able to backup
Dear all,
I tried to perform another upgrade today with Abhinav's assistance, and
right now I am not able to backup the cloud database. This is the error
when doing mysqldump:
root@pri-db-01:~/backup/20131001# mysqldump -u cloud -p cloud >
cloudstack-backup3.sql
Enter password:
mysqldump: Couldn'
Dear all,
I am trying to create CloudStack OS template for ArchLinux. However, I am
not able to find the cloud-set-guest-password password management template
script for ArchLinux. Under the shankerbalan's github site, there are only
scripts for CentOS, Ubuntu, Debian, FreeBSD and SLES:
https://g
Dear all,
Would like to confirm on this:
On Wed, Sep 25, 2013 at 7:40 PM, Indra Pramana wrote:
> 2. Do I need to delete the old system VM template from the template list,
> prior to the upgrade? If yes, I think this should be inside the
> documentation.
>
Prior to the upgrade f
er the ssvm and cpvm are created or
> not?
> try " virsh list " and see if the vms are there? Is it a Rhel host or
> Ubuntu host??
> Also, check what is the entry in /etc/cloudstack/agent/agent.properties
> file for the "resource" parameter.
>
> Thanks and regard
Hi Abhinav,
We are using KVM.
Thank you.
1 - 100 of 122 matches
Mail list logo
