>> "w" == wtopa <[EMAIL PROTECTED]> writes:
w> Yes that would seem about right. The problem I have is that my
w> 166MMX gives me 149.9 BogoMips on my Slackware partition and only
w> 130.6 on my Debian partition. Same hardware (same box).
Same kernelversion? The bogomips implementation changes
Jerry E. McGoveran wrote:
>
> At 10:26 PM 11/10/98 -0500, Ed Cogburn wrote:
> >Jerry E. McGoveran wrote:
> >> Ah Ha! So, the usual package dependancies that apt takes care of
> >> is not applicable to X? (startx is not found on my system, and I never
> >> ran any configuration utility for X and
The machine I want to monitor is a Slackware 3.5 box. So where do I get
snmpd or what should I look for on my machine. I know it is not running one
as I tried that command you gave below last try and it failed.
>
>First of all, make sure you are running snmp on the box. I "think" but I
>am not po
Hello,
John Forest <[EMAIL PROTECTED]>:
> Jiri Baum wrote:
...
> > Well, once you've installed them, you usually don't need them any more.
...
> What if this procedure needs to be repeated on a network of debian boxes?
> Would be redundant to get the packages for each machine, IMO.
Of course. Hen
Hello,
Helge Hafting <[EMAIL PROTECTED]>:
> > On 11 Nov 1998q, Jiri Baum wrote:
> > > Hello Zack Brown <[EMAIL PROTECTED]>,
> > >
> > > > 3) At the end of the "install" phase, dselect asks if it should delete
> > > > installed packages. I suggest that either the default be changed to 'no'
...
> >
Hello George Bonser <[EMAIL PROTECTED]>,
> On Wed, 11 Nov 1998, Jiri Baum wrote:
> > Hello Zack Brown <[EMAIL PROTECTED]>,
> >
> > > I suggest that, by default, dependencies should be downloaded
> > > before the files that depend upon them.
> >
> > Any particular reason?
>
> I can think of a g
Hello Ed Cogburn <[EMAIL PROTECTED]>,
> Kent West wrote:
> >
> > On Mon, 9 Nov 1998, Robert Cloud wrote:
...
> > > If you don't mind I've got another problem.
...
> > > I've got all the Linux files on the c: Win98/dos drive.
You need to "mount" them.
To do this, you:
* create an empty directory
Jerry E. McGoveran wrote:
>
> At 08:06 PM 11/11/98 -0500, you wrote:
> >Jerry E. McGoveran wrote:
> >>
> >> At 10:26 PM 11/10/98 -0500, Ed Cogburn wrote:
> >> >Jerry E. McGoveran wrote:
> >> >> Ah Ha! So, the usual package dependancies that apt takes care of
> >> >> is not applicable to X? (star
Jeff Katcher wrote:
>
> "Costa, Michael J." wrote:
> >
> > I have just installed LINUX on another machine in my office. The powers that
> > be are reluctant at this moment to let me put in on the network. I have
> > loaded some items down to my NT machine and now need to ship them to my
> > LINUX
Geoffrey L. Brimhall wrote:
>
> what version of Netscape were you using ? The latest 4.5 or the older 4.0.
>
> I recently installed the 4.5 on my SMP system and have been having system
> freezes happening at least once a day.
>
> On 11-Nov-98 Rich Harran. wrote:
> > My Debian system just crashed
has anyone else managed to get star office 5 to work? i've been eagerly
awaiting the official release of star office 5 because everytime i ran the
pre-release it would get to the welcome screen and then lock my entire X
display and i had to reboot to get things back under control (i could
telnet
On Wed, 11 Nov 1998, Paul Reavis wrote:
> I just set up the atlanta java users' group site at www.ajug.org; it's
> running hamm. It's hung off a member's cable modem, though, and he has a
> monthly bandwidth limit. Are there any handy utilities to measure
> bandwidth usage so we can keep tabs on i
> I runs fine here. I am running slink and have tried three different
> kernels, 2.0.32, 2.0.35, and 2.1.127, all work fine. Maybe you need
> more video RAM? That thing is a resource pig.
damn, i'm running 2.0.35 with a diamond stealth 3d 2000 (4mb ram), on a
pentium 200 with 96mb ram... so while
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm running hamm and when a user logs in as anonymous into my ftp box,
they can't see what's in the directories; they can cd into them and grab
files if they know the filenames, but can't see anything through ls.
Everything in ~ftp/ is owned by root, a
> I've got it working with my Diamond Stealth 2000 with 4MB of RAM under
> the SVGA X server. I doubt your problem has to do with lack of
> hardware.
hmm you're running svga not the s3v server? i wonder if that's it. i use
the s3v one so i can get better resolution (i believe anyway), and now
On Wed, Nov 11, 1998 at 11:09:15PM +0200, Daniel Mashao wrote:
> I want to use an apsfilter instead of magicfilter and I cannot find this
> package. Anyone know why it is no longer in the Debian packages?
[..]
Look at hte contrib non-us CD package text
--
Cheers
Peter
Does the S3V one really perform better? I used to use it a long time
ago, but I switched to SVGA because I heard that the S3V project was
simply going to be incorporated into SVGA.
On Wed, Nov 11, 1998 at 04:58:11PM -0900, Adam Shand wrote:
>
> hmm you're running svga not the s3v server? i wond
The most frequent problem that causes this is that you need to have ls
in the /home/ftp/bin directory (or whatever directory you use for
anonymous ftp) and you also need ld-linux.so.2 and libc6.so.6 in
/home/ftp/lib because ls depends on them...that is, unless you have a
statically linked ls.
On
Hello!
I have upgraded my system to slink and installed some new packages as
well. Generally slink works fine for me, but some of the programmes have
an eerie kind of behaviour.
Acroread's window - for example - is a complete mess-up. The pull-down
menus are ok, but if I open any .pdf files (even
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 11 Nov 1998, Eric wrote:
> The most frequent problem that causes this is that you need to have ls
> in the /home/ftp/bin directory (or whatever directory you use for
> anonymous ftp) and you also need ld-linux.so.2 and libc6.so.6 in
> /home/f
> On Wed, Nov 11, 1998 at 08:42:55AM -0500, Costa, Michael J. wrote:
> > I have just installed LINUX on another machine in my office.
> The powers that
> > be are reluctant at this moment to let me put in on the network. I have
> > loaded some items down to my NT machine and now need to ship them
-- Forwarded message --
Date: Wed, 11 Nov 1998 09:23:05 -0500 (EST)
From: Zack Brown <[EMAIL PROTECTED]>
To: Michael Beattie <[EMAIL PROTECTED]>
Subject: Re: dselect (or apt) wish list
I'll try to respond to several people's responses in this one message, to
save space. Sorry for
On Thu, 12 Nov 1998, Jiri Baum wrote:
[snip]
> > I can think of a good one that really bugs me. Using the apt method from
> > dselect, if a single package fails to download the none of the packages
> > are installed.
>
> Why wouldn't they be installed? (I don't use apt.) I would've thought
> the
Steve Beitzel wrote:
>
> Hello all,
>
> I know that people are always asking questions about how to
> install StarOffice, but I couldn't find an answer in the archives about
> this. I recently downloaded and successfully installed StarOffice 5.0,
> except when I try to do the online regi
On Thu, 12 Nov 1998, Michael Beattie wrote:
> Bottom line: this is a very small and easy-to-grant wish, but for those who
> want it, it's a big, hard-to-get-around problem. i.e. it prevents me from
> using apt, since apt deletes installed packages automatically; and with
> dselect, I have to be *
Michael Beattie ([EMAIL PROTECTED]) wrote...
> > 3) At the end of the "install" phase, dselect asks if it should delete
> > installed packages. I suggest that either the default be changed to 'no', or
> > else it be made possible to change the default via a config file. I really
> > hate having a s
On Wed, 11 Nov 1998, Tapio Lehtonen wrote:
> Milan Durovic wrote:
>
> > This may sound as a stupid question, but I cannot figure out
> > how to use sound on debian 2.0 system. I never used debian
> > before and I installed it only recently.
> >
>
> If you do not want to compile the kernel for so
Ed Cogburn wrote:
> Geoffrey L. Brimhall wrote:
> >
> > what version of Netscape were you using ? The latest 4.5 or the older 4.0.
> >
> > I recently installed the 4.5 on my SMP system and have been having system
> > freezes happening at least once a day.
> >
> Netscape occaisionly crashs on me to
> On Tue, 10 Nov 1998, Oz Dror wrote:
>
> > Hi
> > I have a pentium-II 400Mhz and a pentium MMX 200Mhz
> > both have 400.59 bogomips
> > Why?
>
> SWAG (Silly Wild-Assed Guess):
>
> The memory is the same speed? Since Intel guesses wrong in the branch
> prediction, it must refetch the instruction
Oh, I thought you were talking about using just the standard in.ftpd
that comes with whatever standard Debian network package. I don't
know anything about any other daemons, but I would guess that they too
probably need ls and it's libs or a statically linked ls. Just create
the directories. T
I did realize that the key is a hash of the name/email, and I was careful
about that, but that *part* of the registration process isn't the problem.
Maybe I wasn't clear enough, sorry about that. My problem, specifically,
is that after I successfully obtain a registration key from StarDivision,
bo
On Wed, 11 Nov 1998, Adam Shand wrote:
>
> > I runs fine here. I am running slink and have tried three different
> > kernels, 2.0.32, 2.0.35, and 2.1.127, all work fine. Maybe you need
> > more video RAM? That thing is a resource pig.
>
> damn, i'm running 2.0.35 with a diamond stealth 3d 2000 (
> From: Leandro GFC Dutra
>
> Not necessarily... for example, take the KDE case. It is GPLd, ...
No, it is not, even if there is written so.
It is not GPL because GPL ensures that all GPLed program can be ported
to Windoze and sold as a statically linked binary file, without paying
*any*
Hi there!
I have a couple of questions about Debian, and let me advance that I am
pretty new to it.
First: I downloaded netscape browser latest version (I guess it is 4.3) and
can´t get it working (Segmentation fault) Any idea? (I have an official
Debian 2.0)
Second: I am also trying to install
[ snip ]
: > Hmm, there isn't even a lib or bin directory! I'm using ProFTP (just
: > noticed that the subject makes it look like I'm running anonftp). I can
: > copy these over from an old install, but what's a better way to fix this?
ProFTP doesn't need a lib or bin directory, which is trul
On 11.11.98 10:12:00 PM wzab wrote:
> Hi!
>Has anybody managed to compile the Ptolemy in debian?
>I know, that there is a deb package available at Vigo university
>(Spain), but it didn't work for me, and there was no source version of
>package to check what is wrong...
>The original sources
On Wed, Nov 11, 1998 at 07:37:10PM +0100, Martin Bialasinski wrote:
> Use superformat in package fdutils
Tnx!
> w> 2) I tried to setup X with XF86setup and xf86config, but when I launch X I
> w> get some fast writings and a black screen and the system hangs up (I reset
> w> it with ctrl-alt-del)
Hi, Steve!
If the registration button is ghosted, I think the registration is OK. Maybe
this is doen automagically if you do an online registration. You get the reg.
key by email in fact you need to reinstall for some reason. Maybe?
just my 2¢...
Wed, 11 Nov Steve Beitzel wrote:
> Hello all,
>
[EMAIL PROTECTED] (Matt Garman) writes:
> Whenever I change the font size in xemacs 20.4, and do a "save
> options" my font change is always lost. I checked the faq, and made
> sure that Options->Frame Appearance->Frame-Local Font menu is not
> checked. I also have the following line included in
Right, I think it's time I installed Netscape using the debian installer
script (my current version I installed using netscape's one). I also think
I'll upgrade to 4.5 or whatever the latest is (unless people have better
ideas). I don't particularly want Collabra and Messenger, does the install
.d
hi
i keep on getting the message "SIOCADDRT: Invalid argument" on bootup since
i started using 2.1.x. i traced the message to this line in
/etc/init.d/network:
route add -net 127.0.0.0
now, will commenting out this line have any untoward effects? if so, can i
upgrade to a later version of netb
The install .deb from slink installed the standalone communicator (glibc2)
just fine for me. There was a small problem when the filename
of the tar.gz file didn't match what the installer expected,
there was a missing digit somewhere. Fortunately
the installer write the expected filename mask in
I would like to keep a copy of every outgoing message I send from
work, (using exmh, nmh & smail).
Is there a simple way of achieving this so I won't have to
cc everything to myself?
Helge Hafting
Zack Brown writes:
> Someone said 'apt' does. But 'apt' also deletes the package files once they
> are installed (it doesn't even ask if that's what I want), which is another
> wish I raised below.
hasler/~ ll /var/cache/apt/archives/
total 335
-rw-r--r-- 1 root root 318440 Oct 16 13:
On Tue, 10 Nov 1998 [EMAIL PROTECTED] wrote:
> In reply to:[EMAIL PROTECTED]
>
> Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]):
> >
> > There is a program called ppc on sunsite somewhere. You can watch the bits
> > on the parallel port, and change it bit-by-bit with it. It describes itself
> > as
On 11 Nov 1998, Jens Ritter wrote:
> > > > On Wed, Nov 11, 1998 at 04:46:29PM +, Rich Harran. wrote:
> > > > > My Debian system just crashed.
> > and is there anything I could have done to bin X
> > without restarting?
>
> Well, if you`re the lucky owner of a dump ascii terminal, you could
Hi,
I've just started using apt for installing and upgrading packages. I'm
very impressed with it (at least as far as getting stuff off the web is
concerned). What I'd like to do is use it for *all* my setup. But I
can't get it to see the stuff on my (CheapBytes) Hamm CDs - which I'd
like to use fo
Thanks to all who offered help and comments. I now have exim as my MTA,
and I'm very pleased with the results. The filtering facilities are nice
- replaced what I previously used procmail for. I don't think there's
anything I needed to do but couldn't with smail/procmail, which I can
now do with ex
On Mon, 9 Nov 1998, Larry McKenny wrote:
> I am unsure how to set up my modem under Debian.
> It is attached to COM 2 in DOS (WIN98 actually) and is a 56K V.90 and
> K56Flex dual-mode modem running on a P2 system. When installing, wvdial
> was unable to detect the modem, although it has run perfec
Hello;
I am running the latest slink (updated with the apt-get command). I have
the -8 X packages. Window Maker stopped working on this system when i
updated from hamm to slink. I compiled Window Maker 0.20.2 from source
and it used to work just fine before the update. Now I get the following
On: Wed, 11 Nov 1998 20:09:20 +0100 Marcus Geiger writes:
>
> XEmacs-Shell-mode doesn't seem to work correctly. I get some
> [ldksjf] <- control-codes in braces. My machine is setup for
> german-keymaps and I installed the german-package.
I have no strange output while executing normal command li
On Thu, Nov 12, 1998 at 07:51:13AM -0500, Vaibhav Goel wrote:
> wmaker: error in loading shared libraries
> : undefined symbol: _Xsetlocale
Since you compiled WM yourself, you should recompile it again. there was
*one* instance of xlib6g that had this function, current xlib6g doesn't.
WM's config
>> "RAI" == Raymond A Ingles writes:
RAI> I don't know if it's debianized, but theres "jsrd" (joy stick
RAI> reset demon) whith lets you use a joystick button to perform
RAI> arbitrary actions. You can configure it to kill X on one
RAI> keypress and reboot on two presses, etc. Sorry, I don't ha
Is there a .deb package for maxima the program for
symbolical math calculations or do I have to compile
it from resources ?
Could you please send the answer to [EMAIL PROTECTED] because
the mailing list too busy for me (I read the archives).
Jan Krupa
Hello, everybody;
When I upgrade from debian 1.3 to 2.0 using autoup.sh, error occurs; Please
tell me why, thank you in advance:
emacs-install emacs20
emacsen-common: Handling install of emacsen flavor emacs20
emacsen-common: byte-compiling for emacs20
Loading 00debian-vars...
Loading 50dpkg-
On Thu, 12 Nov 1998, Javier Velasco wrote:
> Second: I am also trying to install Debian on a PII 450 Seattle Motherboard
> and I cannot have XF86config detect my mouse (PS2 of course). I have tried
> all different configurations. Doesn´t Debian support ATX motherboard? Is
> there any specific pack
> XFree86 Version 3.3.2.3 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: July 15 1998
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (s
Hi debian community,
I have sone problem using exim on my system.
I have this setup:
fetchmail to get mail,
exim to send mail via SMTP,
netscape/emacs/elm as mail reader of various users.
so everytime a send a message to any user, let say joe.user
exim correctly change the 'to:' field to "[EMAIL P
Hi all,
Previous problems with Netscape lend me to reinstall it from
fresh. I downloaded the following packets from slink:
libc6_2.0.7u-4.deb
dpkg-awk_0.7.1.deb
netscape-base-4_5.deb
netscape-base-407_4.07-1.deb
navigator-base-407_4.07-1.deb
navigator-smotif-407_4.07-1.deb
I installed them all w
On 11 Nov 1998, Gary L. Hennigan wrote:
> "Henry Kingman" <[EMAIL PROTECTED]> writes:
> | > On the other hand, if your chipset can't cache more than 64MB, going to
> | > 80MB might actually make some things slower. I'm not sure if telling the
> | > kernel "mem=64M" on an 80MB machine would be eno
i want emacs to do font locking on my java code, but i don't want to use
cc-mode. how do i do this?
The following
M-x fundamental-mode
M-x font-lock-mode
does not work.
--vinny
--
Vincent Murphy | UCC CompSci Student | [EMAIL PROTECTED] | +353 (086) 8397405
>> "G" == Gossamer <[EMAIL PROTECTED]> writes:
G> Also, there are a few files that show up in the package list under
G> the "Up to date" section like this:
G> *** Req base base-files 2.0.3 2.0.3 Debian Base System
Miscel
G> Why does it want to update the file (the *'s, I assum
I use debian2.0.
I could not find binary .deb package for maxima so
I would like to build maxima from resources but I do not know
how to edit properly the ./configure file.
Could someone please give me a hand ?
>From README
BUILDING:
For GCL (GNU Common Lisp) version 2.0 an
I use debian2.0.
I could not find binary .deb package for maxima so
I would like to build maxima from resources but I do not know
how to edit properly the ./configure file.
Could someone please give me a hand ?
>From README
BUILDING:
For GCL (GNU Common Lisp) version 2.0 a
Hello, I have just reinstalled debian 2.0 on my
computer. For some reason the network has not been
configured correctly.
The netcard seems to work ok, and have a ipaddress assigned.
Which commands do I have to issue to set up an default route
so I can access the Internet or other computers on my
-BEGIN PGP SIGNED MESSAGE-
On Thu, 12 Nov 1998, Vincent Murphy wrote:
> i want emacs to do font locking on my java code, but i don't want to use
> cc-mode. how do i do this?
>
> The following
>
> M-x fundamental-mode
> M-x font-lock-mode
>
> does not work.
Have you tried M-x java-
Shaleh <[EMAIL PROTECTED]> writes:
> How did you get the irq options? Did you edit it by hand?
Yep, i just read the card documentation. Then i've put these values
during the 'make xconfig' step.
--
---
Éric Jacoboni « J'
In article <[EMAIL PROTECTED]>,
D'jinnie <[EMAIL PROTECTED]> writes
>
>:> The Acer notebook uses a very nice Neo magic video card. The only thing
>:> that is not nice about this video card is that it is not supported by
>:> Xfree 3.3.2.
>:>
>:> The Neo magic card is supported by Xfree 3.3.3 but t
This is better asked in debian-user.
Regards,
Joey
Carmen Correia wrote:
>
> I work at a public hospital in Portugal. The hospital has a LAN of
> almost 300 personal computers. The vertical distribution is made
> through a FDDI ring and the horizontal distribution is made through
> Ethe
Adam Shand <[EMAIL PROTECTED]> writes:
> has anyone else managed to get star office 5 to work? i've been eagerly
> awaiting the official release of star office 5 because everytime i ran the
> pre-release it would get to the welcome screen and then lock my entire X
> display and i had to reboot to
We have a dual Pentium II server with AMI Mega RAID Controller but
we don't know if it works with Debian Linux 2.0 because the 'recently
released' Linux driver from AMI seems to work only with the latest Red Hat
version (5.2) or the previous Red Hat version (5.0/5.1) with the driver v
0.92
On Thu, 12 Nov 1998, Fabio Belletti wrote:
>
> We have a dual Pentium II server with AMI Mega RAID Controller but
> we don't know if it works with Debian Linux 2.0 because the 'recently
> released' Linux driver from AMI seems to work only with the latest Red Hat
> version (5.2) or the p
On Thu, 12 Nov 1998, Fabio Belletti wrote:
>
> We have a dual Pentium II server with AMI Mega RAID Controller but
> we don't know if it works with Debian Linux 2.0 because the 'recently
> released' Linux driver from AMI seems to work only with the latest Red Hat
> version (5.2) or the p
On another list, Alan Cox pointed out that the kernel 2.0.36pre series
includes the latest Megaraid driver.
To install this kernel to a Debian system, get a pristine 2.0.35 source
and unpack it in the usual manner. Dont use the Debian source package,
I think it is patched already. Go to Alan's
On Wed, 11 Nov 1998, Joey Hess wrote:
> Tom Lear wrote:
> > Are you planning a key signing? I've wanted to have a key signing
> > party/whatever in the bay area for a while now.
>
> I think a key signing would be a good thing. Everyone who wants to, just
> bring about 10 copies of a paper with
Hi folks,
Due to an extreme amount of idiocy at the place where I work, I have need
to modify the /bin/login program so that instead of displaying this --
adler login:
it will display this --
login:
I have looked through the /etc/login.defs file but can see no options to
eliminate displaying
On Thu, Nov 12, 1998 at 02:09:33PM -0500, John B. Fink wrote:
>
> Hi folks,
>
> Due to an extreme amount of idiocy at the place where I work, I have need
> to modify the /bin/login program so that instead of displaying this --
>
> adler login:
>
> it will display this --
>
> login:
>
> [snipp
Right, the usual question... basically, I:
Don't want to spend a fortune
Don't need anything fantastic
Do want something that works well with Debian
Don't want to have to use proprietary X servers.
This is for work, so I don't want to have to dick around with it much,
and especially don't want my
Hi,
I run Staroffice 5 on my linux (2.0.34, hamm, updated libc6 to 2.0.7u-4,
128 MB RAM, Mach64) and it runs ok. Nice viewer for M$ Files, but I still
stick to TeX. The Palmpilot support seems to work only on windows
platform, I didn't find it on linux yet.
The only thing that doesn't seem to wor
Hi,
after installing the new slink netscape binaries (4.5-1) I get this
error messages when starting the program:
ERROR: /usr/lib/netscape/45/communicator/plugins/libnullplugin.so: undefined
symbol: FE_GetToplevelWidget
Cant load plugin /usr/lib/netscape/45/communicator/plugins/libnullplugin.so.
> I am running on a Pentium 233 with 64 Meg and installing StarOffice
> crashes my machine too. It crashes everytime I try. I think it damaged
> my partition somehow. Now its time to get gwp working.
which x server are you using? i'm in the process of converting from s3v
to svga, and if it still
hi Guys.
While trying to fix some other problems on my Alpha, I upgraded to
Sendmail 8.9.1-15 and saw the message:
"The format of sendmails databases has changed (now using libdb2)."
"You *MUST* update your databases (newaliases, users, etc.)"
"before allowing sendmail to restart."
i use virtuse
Hi!
}-> I have a Dell Optiplex Gxa that I am attempting to install X windows on.
}->
}-> I can get XF86Setup to run , can setup the mouse properly, than comes the
[...]
}-> window the following happens
i´ve got an rage pro, too, but the "II"-type
}-> _X11TransSocketUNIXConnect Can't Connect erro
David Welton wrote:
> Don't want to spend a fortune
> Don't need anything fantastic
> Do want something that works well with Debian
> Don't want to have to use proprietary X servers.
Hm, my toshiba 445cdx (p-133, 16 mb ram, 2 mb vram, sb, 1 gb disk, cd drive,
floppy, 2 pcmcia) cost about $1100, an
Every time somebody views a page off my webserver I get a line
like this in the error log:
[Fri Nov 13 08:22:26 1998] [warn] handler "server-parsed" not found, using
default handler for: /home/gossamer/public_html/vim/index.html
And, not surprisingly, it's not processing inline CGI stuff.
I'v
I mucked up my package list. I'm trying to install kde and xfree86, the
stable versions. One of the 2 required, so I thought, a xlibc _unstable_
version. I connected to the local debian distribution ftp site and got the
unstable directory listings. Now, dselect wants to upgrade _everything_ t
"J.L.M." wrote:
> 2940. I installed Redhat and Turbolinux on it just fine. I
> am using it now, X, IP Networking, everything is fine. I want
> to whack this system and install debian now. I really do want to
> do this. Yes I have a backup.
>
> When I try to install Debian, either booting f
I have downloaded it a few days ago, so I suppose it was the second
version.
After running pigi I get something like this:
PI initialization error (I don't remember the exact message, because I've
purged the deb package and started to experiment with rebuilding from
original sources)
What about "autoconf" utility?
From man autoconf:
NAME
autoconf - creates scripts to configure source code pack
ages using templates
SYNOPSIS
autoconf [ --help | -h ] [ --localdir=dir | -l dir ] [
--macrodir=dir | -m dir ] [ --version ]
DESCRIPTION
To crea
Are there any iCBS users out there? Does anyone know if it's possible to
get function key support for SCO binaries? Only F1-F4 seem to work.
Thanks.
Hi,
Is makeinfo available in the unstable tree yet? If so, what package is it
in? I couldn't find one.
Thanks,
-Ossama
__
Ossama Othman <[EMAIL PROTECTED]>
58 60 1A E8 7A 66 F4 44 74 9F 3C D4 EF BF 35 88 1024/8A04D15D 1998/08
Hi, when I ssh to another sshd machine, I can't forward X11 connections
back to the machine where I am logged into the console. I always get the
following error message:
bertha:~$ netscape
telmer.com: Remote: Fwd X11 connection from BERTHA.GSIA.CMU.EDU refused by
tcp_wrappers.
X connection to ber
hello,
i did just managed to get a working (almost ;) slink distrib, but now netscpae
(not installed through dpkg tho, but the version installed with dpkg has the
same problem) tells me:
/usr/local/netscape/netscape
netscape: locale `C' not supported.
Perhaps the $XNLSPATH environment
I also get this error message on boot. The route command seems to be
broken, as the route manpage syntax will not add the loopback route
and generates this message. Don't know enough about it to tell exactly
what is broken (package-wise).
--
Eddie Seymour, WB4MLE
E-Mail [EMAIL PROTECTED]
PGP KE
i can't use xplaycd or any other cd playing program as a normal user.
the message i get from xplaycd is that permission is denied to use /dev/cdrom.
i can make the program work using sudo though.
any way i can fix this?
i will supply diagnostics if someone shows me how to get them.
regards,
vinny
Re-install xlib6g and it should work. Now if only I could get Acrobat
working again...
Regards,
Jeff
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 12 Nov 1998, Nathan E Norman wrote:
> : > Hmm, there isn't even a lib or bin directory! I'm using ProFTP (just
> : > noticed that the subject makes it look like I'm running anonftp). I can
> : > copy these over from an old install, but what
--- Begin Message ---
Alan Cox wrote:
>
> > What else will the lsb cover? Or has there been a decision about that
> > yet?
>
> The only other stuff covered at the meeting was X11. The good work XFree
> does is a big help there as their binary interfaces and the X specification
> API's are
Badlandz wrote:
> Alan Cox wrote:
> I think it is unwize at this point to make LSB conserned with X11R6
> standards. Of course it should/could comply with what X11R6, but I
libX11.so.* is Xlib is X11, as are the X packages. Other stuff like
themed widget sets sit on X11 (ie another library that y
I guess I am use to BeroList. ;-)
Anyhow I will try not to do it again...--- Begin Message ---
Alan Cox wrote:
OK, you got me on the previous. I'll look into it more, and take your
word for it now.
> > therefore if: Linux/hardware allowed Serial number on hardware,
> > accessable in OS then: IS
1 - 100 of 106 matches
Mail list logo
