set
What is the appropriate place to request adding this module to Debian
kernel?
Thanks
Pavel
On понедельник, 23 сентября 2019 г. 00:58:35 MSK, pe...@easthope.ca wrote:
Wine configuration > Graphics > Window settings has a checkbox for
"Emulate virtual desktop". Unnecessary for most applications?
Graphics window for the application runs within a Debian desktop,
analogous to winecfg?
On суббота, 21 сентября 2019 г. 01:37:39 MSK, Mark Fletcher wrote:
Hi there
If one wants to create a new systemd service on Buster, for example for
some home-grown unit, where would be the right place to put the .service
file? Candidates are obviously /lib/systemd/system or
/etc/systemd/syste
start with the ssd, it is sdc device. I know, how to create the lvm with
textual installer, but I have problem expanding it to next two hdds,
/dev/sda and sdb, so I am doing something wrong. I want to use all data
in one lvm partition, so / for everything.
Can you help please?
Thanks,
Pavel
want to use all data
in one lvm partition, so / for everything.
Can you help please?
Thanks,
Pavel
old Debian versions?
I am interested mainly in wpa-supplicant, less in hostapd.
Currently these systems are at version less than 1.0.
Has anyone tried (or thought) of this?
Regards,
Pavel A.
As for pastebin logs: I try to cut only times when it happens: it was
about 04:05:07.
Pavel Kosina napsal(a) dne 21.7.2016 v 11:13:
Johann Spies napsal(a) dne 21.7.2016 v 10:10:
Check your logs (dmesg, syslog and messages) for possible indications
on why this happens.
well I can see
console) when Gnome
becomes unresponsive? Or if you have another computer on the same
network segment, try to ssh to your computer and see what is going on
(dmesg, the logs etc.)
Nothing works, even ssh, even CTRL-F3.
Thank you
Pavel
-supply which might be heating too
much, quite new technology I think. I have another similar powerboard,
without this on-board-power-supply and there are these freezing not.
Well, it might be of course another cause.
Pavel
frequently, but still, once/twice a week, mostly a few minutes after
login to gnome.
Thank you
Pavel
brw-rw 1 root disk 8, 3 čec 13 12:32 /dev/sda3
brw-rw 1 root disk 8, 4 čec 13 12:32 /dev/sda4
/etc/group:
disk:x:6:
Pavel
Brian napsal(a) dne 12.7.2016 v 16:25:
Would see what comes up in the log with searches for "usbfs" and
"claimed"?
:~$ journalctl --no-pager | grep usbfs
čec 12 18:49:13 linuxbox kernel: usbcore: registered new interface
driver usbfs
:~$ journalctl --no-pager | grep claimed
čec 12 18:49:41
:~$ sudo scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Thank you
Pavel
0&DSCCHK=666854028859f4cda9ad8ff886e907024899648c,
but this doesnt work either.
The Image Scan! for Linux long time not responing and then it
reports: Could not send command to scanner. Check the scanner
status.
xsane doesnt works too.
Thank you.
Pavel
.
-
why is that? Is that bug or I miss something?
Due to this there is also error: "Partition 2 does not start on physical
sector boundary."
Thank you
Pavel
On понедельник, 15 февраля 2016 г. 13:50:57 MSK, Jonathan Dowland wrote:
On Sun, Feb 14, 2016 at 09:10:07PM +0300, Adam Wilson wrote:
Surely you mean LUKS on top of btrfs?
I don't think that's possible. If you want btrfs and encryption
the advice is
to do the encryption *underneath* btrfs, b
On воскресенье, 14 февраля 2016 г. 19:05:51 MSK, Bhasker C V wrote:
But for sure there is data in the volume.
btrfs-show-super reports nicely the btrfs filesystem
Can someone help me how to proceed further ?
I recommend asking for recovery instruction in bt...@vger.kernel.org list
as a last r
On суббота, 5 декабря 2015 г. 14:01:23 MSK, Ansgar Burchardt wrote:
Does the user manager get started when logging in locally? If not, make
sure dbus and libpam-systemd are installed.
That's right, libpam-systemd wasn't installed. Now it works.
Hello,
"systemd --user" instance is not autostarted here on Jessie when logging
remotely via SSH.
In other distributions this is taken care of by default, I'm not sure how
to enable systemd user mode on Debian. Please help.
What's the current officially recommended way to operate packages: apt-
utilities or aptitude?
I heard aptitude development was stalled and it offered no real advantages
(not counting interactive mode).
should continue my search?
Thanks,
Pavel
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/2014050810.7397f473@nbkrc
On Monday, 7 April 2014 22:38:45 MSK, Hans wrote:
Hi folks,
just an understanding question. In README.debian stand this sentence:
---
To test systemd, add:
init=/bin/systemd
to the kernel command line and then rebooting, or install the
systemd-sysv package.
--
Just wondering.
I this
On Saturday 14 December 2013 15:02:04 Bob Proulx wrote:
> In my opinion one of the best features of Debian is that it supports
> upgrades. It isn't necessary to reinstall. At worst it is easier to
> take some _packages_ (some packages not the system, such as GNOME or
> KDE) off the system before
On Friday 13 December 2013 17:26:01 Ralf Mardorf wrote:
> So if I later today set up Debian stable, I better directly drop init
> and install systemd during installation? I dislike systemd, but I
> already use it for a long time with my Arch Linux.
>
> IOW, Debian will drop init and will switch to
On Friday 13 December 2013 10:44:24 Bob Proulx wrote:
> In the future if Debian changes to a new init then it will be set up
> such that there is an upgrade path from one to the other. Because
> there are *lots* of Debian machines out in the world and Debian is all
> about being able to upgrade.
On Friday 13 December 2013 18:13:29 Brian wrote:
> The call for release goals has finished and we have received the
> following proposals:
>
>* UTF-8
What's wrong with UTF-8 currently?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Tr
I've browsed through the hot debates here
https://wiki.debian.org/Debate/initsystem
and the LWN article https://lwn.net/Articles/572805/
But there's no mention about when the deadline for the final decision on future
init system(s) is.
I have to prepare my heart for it, does anybody know?
--
just an addon. From manual page i have changeed in my ./mc/ini to
editor_key_emulation=1
but after off/on mc or mcedit, it is back to
editor_key_emulation=0
and emacs keys do not work.
Pavel SRB wrote:
hi all
debian xterm or konsole, has default key settings like in emacs. It
also
just an addon. From manual page i have changeed in my ./mc/ini to
editor_key_emulation=1
but after off/on mc or mcedit, it is back to
editor_key_emulation=0
and emacs keys do not work.
Pavel SRB wrote:
hi all
debian xterm or konsole, has default key settings like in emacs. It
also
hi all
debian xterm or konsole, has default key settings like in emacs. It also
work in other console applications like centericq, python shell and
others. Please is there a way to set this also for mcedit or others like
thunderbird, mozilla, or gui appplications.
thank you
pavel srb
change settings like this: when i open more
documents, for instance 4, i have four acroread windows. In previous
version all these document were open in only one window.
thank you very much
pavel srb
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
change settings like this: when i open more
documents, for instance 4, i have four acroread windows. In previous
version all these document were open in only one window.
thank you very much
pavel srb
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
Pál Csányi wrote:
2007/11/10, Pavel SRB <[EMAIL PROTECTED]>:
Pál Csányi wrote:
2007/11/8, Pavel SRB <[EMAIL PROTECTED]>:
for my Emacs, to be able to write in Czech language a had to set .emacs :
(custom-set-variables
'(current-language-environment "cz
Pál Csányi wrote:
2007/11/8, Pavel SRB <[EMAIL PROTECTED]>:
for my Emacs, to be able to write in Czech language a had to set .emacs :
(custom-set-variables
'(current-language-environment "czech")
'(default-input-method "czech")
I try it with
Pál Csányi wrote:
2007/11/8, Pavel SRB <[EMAIL PROTECTED]>:
for my Emacs, to be able to write in Czech language a had to set .emacs :
(custom-set-variables
'(current-language-environment "czech")
'(default-input-method "czech")
I try it with
Pál Csányi wrote:
Hello!
I try to set up my Debian Etch system so I can to write the euro symbol in the
GNU Emacs version 21.4.1.
I red the documentation here:
http://www.debian.org/doc/manuals/debian-euro-support/ch-applications.en.html
but can't find the solution for my problem.
I have a Hu
Debian(Sid and Etch) or Debian Clones
(*buntu, knoppix.)
good luck
Pavel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ce i have learned the key strokes, i
start working faster. And i nearly do not have to use mouse :o). If you
also want to learn Lisp, you can look around Elisp, in which you can
enhance your emacs.
good luck
Pavel SRB
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "un
experimental.
http://packages.debian.org/experimental/editors/openoffice.org
so i add to my list
deb http://ftp.debian.org/debian/ experimental main contrib non-free
but after
apt-get update
i still get answer i already have newest.
did i add this experimental line correctly?
thank you
Pavel SRB
20051028+1
if you can tell me where should i look, i will very appreciate it
thank you very much
Pavel SRB
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
if you can tell me where should i look, i will very appreciate it
thank you very much
Pavel SRB
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
the problems described above. has any1 encountered similar problems? is
there anything more i can do to tighten the security? can anyone give me some
tips?
thanks, Pavel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>That can be done by running the program with sudo.
>Is there any other way?
sudo is the best secured and controled way.
> Can anybody write to /tmp?
/tmp available for all users for all actions
I suggest you to use /tmp/ for IPC communication.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
_
Charla con tus amigos en línea mediante MSN Messenger:
http://messenger.microsoft.com/es
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hallo,
What e-commerce would you recommend to install under debian ?
Greetings
Pavel Sokol
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello everybody,
I have been looking for documentation on how to set up the driver module for
the C-Media CMI8738 sound card I have on one of the machines here. Including
the module when I've installed Debian Woody, didn't work.
I wasn't able to find a guide for doing this installation properly
)
-Best regards,Pavel A.
Korshunov.E-Mail: [EMAIL PROTECTED],ICQ:
19272711
Konqueror will not run any Java applets (java executable not found) Could
anyone give me some suggestions please about how to effectively enable Java
in Konqueror ?
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
FYI: I was aware about lm-sensors and never installed then at all.
--- Adrian Bridgett <[EMAIL PROTECTED]> wrote:
> The only thing I'm aware of is a warning from the lm-sensors package which
> comes up if you try and install lm-sensors-source (not sure about other
> lm-sensors packages:
yet).
There was up-to-date Woody installation on it with custom 2.4.16 kernel and old
thinkpad-source & pcmcia-cs modules compiled/installed.
Pavel.
PS: I know that my IBM TP BIOS had several mistakes in it (i.e switching
occasionally LCD disp
Hi All!
Download and compiled pure kernel 2.4.17 on Woody.
After reboot had plenty of complains to default console from SMC NIC.
Does somebody has a _good_ experience with new kernel?
=
With best regards,
Pavel.
---
Sorry about an adv. below
oblem is not in consequent
tftp download of kernel image but I would expect that
at least "DHCP.." message would vanish, and tcpdump
doesn't show and tftp activity.
Thanks for any ideas
Pavel
Here is my dhcpd.conf with maybe some redundant options:
# dhcpd.conf
nel?
---
Regards,
Pavel Epifanov.
E-mails: [EMAIL PROTECTED] [EMAIL PROTECTED]
s, please, tell us something about you, so
that we can see what tasks you could handle. BTW, the other developer of
debdoc (now contracter to "ddoc") is Erik Winn <[EMAIL PROTECTED]>.
> ps. I'm setting the reply-to to [EMAIL PROTECTED] since that is one of the
> lists I'm in.
I am no longer a member of debian-user (too much traffic for my little time),
you could only contact me through debian-devel and debian-security
(and of course my official e-mail mox).
--
Happy to hear from a friend,
Pavel Minev Penev
From: Pavel M. Penev <[EMAIL PROTECTED]>
Subject: Re: Kernel recompile problems
> Then why not try moddep -a -e?
I meant "depmod" here.
Sorry,
Pavel
On Tue, 25 Jul 2000, Krzys Majewski wrote:
> What does this mean? -chris
>
> Jul 25 08:42:33 cr275960-a kernel: Cannot find map file.
> Jul 25 08:42:33 cr275960-a kernel: No module symbols loaded.
See klogd(8) for explanation.
Hope this is enoug,
Pavel
security
hole). What I did was:
1. cd to the chroot point
2. tar xvfz
/debian/dists/stable/main/disks-i386/current/base2_1.tgz
3. dpkg --instdir= -G -i bind_<...>
And then set up some other utilities needed by bind
(e.g. sendmail, (ana)cron, ...).
Hope I help,
Pavel
orts
"OPL[1-3x]". You would also have to include the MSS (Microsoft Sound
System) and possibly others (depending on the card). See
/Documentation/sound/OPL*. Where "*" is the appropriate
for your case.
Success,
Pavel
l you're running now wasn't compiled at the same time as these
> modules.
Then why not try moddep -a -e?
Try,
Pavel
.bz2 > t.bulk.dmg
# diff -u t.bulk.o t.bulk.dmg
I also tried "joe"-ing the bz2 file and recovering. It worked as described
in the manual page. (The block I "edited" was lost)
Hope you are happy now,
Pavel
that you should read
/Documentation/networking/shaper.txt and the help
you could get from the kernel configuration menu. You may also need some
additional software (), and
Success,
Pavel
us run rpm packages??..
> >
Hope this is of any use,
Pavel
to four physical communications ports on
a normal PC. The reason to have devices like COM5 under windows is that it
represents a non-default port configuration by assigning it a new
number. In Linux you have the "/dev/ttyS[0-3]" devices which represent
your physical ports. You can change their configuration (IRQ+I/O base) via
setserial. See the manual page.
Success,
Pavel
rd set for "root" so boot your machine and supply
an empty one to log in.
I also suggest reading passwd(1) :).
Success,
Pavel
r/bin; however, all new packages should be aware of the
in-building of the command and not use explicit paths (like "/bin/kill").
Hope this is delightful,
Pavel
thing like /home/user/mypackage/etc instead of /etc
for configuration files). Also not all packages may be installed without
root permissions (I hope acroread is not one of them).
Hope someone makes a better offer,
Pavel
I see the problem about the formatting is that you need a
From <[EMAIL PROTECTED]>
line at the beginning of every message. You can make it by creating a
little wrapper-script in your favourite programming language (awk, perl,
python, bash, tcsh, even C/C++), and piping the message through the
script in your procmailrc.
Ask for help if you are not a programmer,
Pavel
On 18 Jul 2000, Bruce Stephens wrote:
> "Pavel M. Penev" <[EMAIL PROTECTED]> writes:
>
> > Can someone tell me a sensible reason for not having a 'diff'
> > equivalent for binary file?
>
> What do you want to do?
>
> If you want the fol
o mediante Web E-mail de MegaRed
> INTERNET POR CABLE <<<<<
> >>>>>http://www.megared.net.mx
>
>
X11 is capable of using a number of ways to permit users to connect to it.
Your problem is probably caused because the server and the client run with
different user IDs.
You had better see X(1), xauth(1x), xhost(1x) and iceauth(1x).
Hope I help,
Pavel
t;
>
I don't know what M$ products use to build MIDI into HTML, but the right
way to do it according to HTML v4.01 (see http://www.w3.org/) is to use
objects:
13.3 Generic inclusion: the OBJECT element
Start tag: required, End tag: required.
Success,
Pavel
Debian and Windows98 on the same large disk and
> came across anything similar?
>
>
> Cheers
>
> Dimitris
>
>
>
You should see fdisk(8), section DOS 6.x WARNING.
Success,
Pavel
it nicer
by using uname, for example. So, I agree -- send a bug report (with
severity of about whishlist) if you would.
Pavel
, especially if the man page is
> specified.
>
> Cheers,
>
> Etienne
>
>
See the manual pages of syslogd and klogd.
Hope you get satisfied,
Pavel
Subject: Re: anyone knowledgeable enough pls help!
On Mon, 17 Jul 2000, Ron Rademaker wrote:
> On Mon, 17 Jul 2000, Pavel M. Penev wrote:
>
> >
> >
> > On Mon, 17 Jul 2000, Ron Rademaker wrote:
> >
> > > For the starting of x-windows, I guess you
On Mon, 17 Jul 2000, Joseph de los Santos wrote:
> Hi Pavel,
>
> Thank you. I would really appreciate it if you can send me your
> programs... if you don't mind that is :)
>
>
>
> Pavel M. Penev [EMAIL PROTECTED] wrote:
>
> This here is absolutely
:0 carrier:0
> >> collisions:0 txqueuelen:0
> >>
> >> ** lsmod **
> >> Module Size Used by
> >> nls_cp437 3548 1 (autoclean)
> >> tulip 29060 0 (unused)
> >> serial 18412 1
> >> parport 6600 0 (unused)
> >> vfat8972 1
> >> umsdos 22768 0 (unused)
> >>
> >>
Hopefully helpful,
Pavel
On Mon, 17 Jul 2000, Bolan Meek wrote:
> "Pavel M. Penev" wrote:
> >
> > (I know you like to help, so here is something to make you feel good... )
>
> Well, thank you for the opportunity!
>
> > Can you, please, inform me on what is the procedure of
On Mon, 17 Jul 2000, Dinesh Nadarajah wrote:
> I tried all sorts of combinations but don't seem to be
> able to get it going. What is the name of the Xlib
> library files? Here are the things I tried. Any other
> advice?
>
> Thanks.
>
> --- "Pavel M.
on that is broken. /proc/sys/kernel/modprobe
> is not a good way to determine whether kerneld should be run.
What I think is that you are wrong. If you have compiled your kernel with
'CONFIG_KMOD' defined, then you would have kmod built into your
kernel. "kmod" is a REPLACEMENT for kerneld, remember?
> Perhaps you should file a bug on it?
Don't be that fast.
Regards,
Pavel
ailing List Archives
[EMAIL PROTECTED]
(... or at least make you laugh :))
Yours memberly,
Pavel M. Penev
to be a symlink to /usr/lib/X11R6 where ld likes to look for
the libraries. Either make the symlink, or give ld (gcc will pass
appropriate arguments to ld) a "-L/usr/X11R6/lib" switch.
This is for now,
Pavel M. Penev
On 17 Jul 2000, Riku Saikkonen wrote:
> "Pavel M. Penev" <[EMAIL PROTECTED]> writes:
> >Can someone tell me a sensible reason for not having a 'diff' equivalent
> >for binary file?
>
> There is "cmp", but it reports only the position of
On Mon, 17 Jul 2000, Ron Rademaker wrote:
> For the starting of x-windows, I guess you could but startx in .login in
> the users home-dir.
> The netscape part it quite a bit more difficult ( I guess you can start it
> using .Xsession or something, but you'll have to check the docs of that
> for
isk partition,CD-ROM,etc.). You would need to use an address like
'http://www.xx.debian.org' where "xx" stands for the country
identifier of the mirror site. (You may leave this blank, i. e. use
'http://www.debian.org'). If the site you want to use does not support
HTTP (you can hardly find such, though) you may use "ftp://"; instead
"http://";.
Hope this is enough,
Pavel M. Penev
st a password, and if it finds it acceptable it would
change the firewall rules to permit netscape "delete_event". You have a
severe problem. You would need to read tons of documentation (esp. if you
follow my suggestion). I would be curious to know if you succeed to solve
it (and mostly HOW?).
Sorry, I can't offer anything better,
Pavel M. Penev
a hard problem to solve. You
might consider creating 100-200MB VFAT partition just for transfer
purposes, or try keeping what you want available to the both OSes on in
NTFS partition and accessing from Linux.
Hope this might help you,
Pavel M. Penev
Can someone tell me a sensible reason for not having a 'diff' equivalent
for binary file?
Regards,
Pavel M. Penev
ey, have you also and ICQ client somewhere on your network ???
Again you can reject his requests for bringing line up with diald.
Please do not send large trace to mailing list - only if requested
directly to person. What is your diald config looks like ?
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
d for last couple of month (for me!).
If you will have a lot of messages in the logs than you need
to adjust some rules. I understand it is not perfect.
The idea is from one Web site (sorry I missed a name).
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [
-1The S-Lang programming library, development
ii tcl8.0-dev 8.0.5-4The Tool Command Language (TCL) v8.0 - Devel
ii xlib6g-dev 3.3.6-3include files and libraries for X client dev
ii zlib1g-dev 1.1.3-5compression library - development
First you should check f
Dear All,
There are plenty of tools to encode WAV -> MP3.
I use bladeenc (just download and compile from its home).
Whats about back convertion (decoding). MP3-HOWTO only covers
encoding process if I am right. Is there a debiantized packages
already ?
---
Regards,
Pavel Epifanov.
[EM
nager has a flag -q .
I do not know about X programs.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
Dear All,
Did somebody knows about program to capture/grab
text console screen ? Normally you can do it by GPM,
but on my laptop it does not work with 2.2 kernels
(bug posted). Sorry there is no X on my old computer.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
st
one broken header file which did not allow me to compile KDE2-base package )
I would pretty recommend to wait till they release at least QT 2.1.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
es not looks
as best decision for the usual workstation computer.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
recompile kernel (mine is about 450kb) to keep only neccessary
things your hardware will run just fine. Thanks to Debian.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
t; "; \
) | $SENDMAIL -oi -t
# MIME uncompressing
:0
* ^Content-Type: *text/plain
{
:0 fbw
* ^Content-Transfer-Encoding: *quoted-printable
| mimencode -u -q
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
:0 fbw
* ^Content-Transfer-Encoding: *base64
| mimencode -u -b
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
}
===cut===
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
a lot of garbage from dpkg/apt status file.
Please correct me if I missed one way.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
/move old file back. Lucky it was saved with diff.name.
Author has been informed already.
---
Regards,
Pavel Epifanov.
[EMAIL PROTECTED] , [EMAIL PROTECTED]
1 - 100 of 124 matches
Mail list logo
