I just want to report that the issue is identical with version 2.7.0-22.
I also want to point out one more thing that absolutely blows my mind: in
/etc/default/snort is a line:
PARAMS="-m 027 -D -d "
Is this correct? Why are the daemon parameters in this file?
Getting back to /etc/snort/sn
Package: snort
Version: 2.8.1-2
The state of snort is basically a disaster. I don't know what you guys are
trying to do with it, but the way you have set it up with your convoluted
configuration and initialization scripts has not helped make the package more
stable, easy to use, or better. Wh
Package: flashplugin-nonfree
Version: 1:1.7.2
I would like to confirm that using the amd64 port I experienced the same
problem as described above, and the steps outlined also above:
dpkg-reconfigure nspluginwrapper
update-alternatives --auto flash-mozilla.so
also remedyed the problem.
> Try using /dev/twe0 or /dev/twa0 as per the documentation, rather than
> /dev/sd?.
>
i saw that mentioned but "dmesg |grep tw" does not show anything
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: smartmontools
Version: 5.38-1
There is not even any mention of SATA drive configurations in
/etc/smartd.conf. This file appears to be old and crusty. I used the
stanzas for 3ware controllers as a template for a 3ware SATA array
controller and summarily received the following error messa
please close this bug. the problem no longer occurs with version
1:8-6-2 of fglrx-kernel-src.
thanks!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: kopete
Version: 4:3.5.9-3
Kopete displays annoying popup messages on the screen when a connection
is lost, even though there is nothing set in notifications to tell it to
do so. This "feature" is extremely annoying as, if a person has an
intermittent Internet connection (for example wire
Package: fglrx-kernel-src
Version: 1:8-6-1
Building the fglrx module for the most recent linux-image-2.6.25-2-amd64
using linux-headers-2.6.25-2-amd64 (2.6.25-6) the module builds fine,
however, it fails to load with modprobe:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.25-2-a
Package: wpasupplicant
Version: 0.6.3-2
I am not certain whether this bug is caused by wpa_supplicant or ifupdown.
When wireless interface wlan0 is configured and then a bridged interface is
created on the system using:
brctl addbr br0
brctl addif br0 wlan0
ifconfig wlan0 0.0.0.0
ifconfi
Here is the wpa_supplicant.conf I am using. I can confirm again that
wpa_supplicant and ifup/down are basically totally broken with respect
to bringing up/down the wireless interface. At boot, based on the
/etc/network/interfaces above and this wpa_supplicant.conf, it will do
the correct thing a
Package: ifupdown
Version: 0.6.8+nmu1
Trying to follow the information in
/usr/share/doc/ifupdown/examples/bridge which seems to be incorrect.
There are two samples listed there to use in /etc/network/interfaces:
1.
auto eth0
iface eth0 inet static
address 10.0.0.225
netmask 255.
Package: ifupdown
Version: 0.6.8+nmu1
When an user tries to configure a bridge interface on their system and
tries to use the documentation provided in
/usr/share/doc/ifupdown/examples/bridge, this documentation is not
complete enough. It says to create stanzas in /etc/network/interfaces such as:
Package: bridge-utils
Version: 1.4-3
Following the documentation in /usr/share/doc/ifupdown/examples/bridge
and bridge-utils-interfaces(5) it does not really explain very well how
to use a bridge interface on a system which has existing interfaces.
For example, if a system has an eth0 interface an
Package: ifupdown
Version: 0.6.8+nmu1
I followed the procedure outlined in
/usr/share/doc/wpasupplicant/README.modes.gz "3. Mode #2: Roaming Mode"
which I assume most people with laptops would want to use, which gives
me the following /etc/network/interfaces stanza for the wireless device:
allow-
Package: wpasupplicant
Version: 0.6.3-2
Unfortunately wpasupplicant does not make it very easy for the average
end user to be able to configure their wireless interface. I followed
the directions in /usr/share/doc/wpasupplicant/README.modes.gz, section 3. "Mode
#2: Roaming Mode"
Following the in
this same behavior also happens when a file is manually enqueued from
the command line with audacious -e the first instance of
audacious will be left running, a second instance, with all the original
files, plus the new file, will be launched. also, it takes 30+ seconds
for it to launch after
Package: audacious
Version: 1.5.0-2
Under konqueror I have set up a file type "audacious_enqueue" which uses
"audacious -e %F" This should then enqueue whatever selected files into
the playlist of the current running instance of audacious (this is
exactly the behaviour of xmms), but it does not
Package: zoneminder
Version: 1.23.2-2
zoneminder sprays a ton of stuff into syslog. I think this is really
wrong. Syslog should be reserved for more critical, system-related
processes and daemons to log to, not for some ancilliary application
like zoneminder to use. Inasmuch as syslog is an im
uh oh. that output was from the wrong machine. sorry. i will send
from the correct machine...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
> When did this problem appear?
>From the point of installation onwards.
> Did you upgrade something as this time?
I upgrade fairly regularly but the problem has persisted.
>
> Could the problem be related to switching to a VT console and then back
> to X?
Definitely not. I happens con
Package: linux-headers-2.6.20-1-686
Version: 2.6.20-1
# apt-get install linux-image-2.6.20-1-686 linux-headers-2.6.20-1-686
Reading package lists... Done
Building dependency tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you
Package: belocs-locales-bin
Version: 2.4-2.1
Unpacking belocs-locales-bin (from
.../belocs-locales-bin_2.4-2.1_i386.deb) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF
> >
> > I am getting the same error. I applied the patch to
> > /usr/lib/iceweasel/iceweasel and it has no effect.
>
> Try upgrading to the latest version of iceweasel instead.
>
I'm using 2.0.0.2+dfsg-2, is this not the latest?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
>
> 1. try a different X driver
Right now I'm using the fglrx driver. The video card is so new that I
think the ati driver does not yet work properly with it.
>
> 2. try flipping:
> Option "HWCursor" "off"
>in /etc/X11/xorg.conf
Tried it but it had no effect.
> 3. take a look whether ot
Package: chameleon-cursor-theme
Version: 0.5-1
Whenever the cursor moves across a title bar of a non-focused window it
makes a dark block in the title bar around where the cursor is.
It also leaves an artifact when moving the bar that divides 2 frames, such as
the one separating the left and ri
One way I could envision it being would be like this:
First debconf question: "Please choose a level of configuration. For
most users setting up mail to work with their ISP's mail server the
"Simple" method should be sufficient. Choose "Advanced" if you are
setting up your own mailer or intend
Package: exim4
Version: 4.63-17
Okay, maybe not exactly 98%, but it can be guaranteed that the vast
majority of people using Exim fall into the category of people with an
ISP account who must use their ISP's mail server if they expect to be
able to send mail anywhere.
Given that this is the case
please disregard the last item regarding the "Error loading media" error
occurring in the playlist window. It turned out to be due to corrupted
media.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: amarok
Version: 1.4.4-2
There are a couple bugs with Amarok that I have found.
One is that when the Statistics or Queue Manager windows are enabled
from the menu, the respective windows popup in the middle of the screen
and disappear when the cursor moves away from the main Amarok windo
Package: xserver-xorg-core
Version: 1.1.1-15
I don't know if this got fixed in a very recent release, but within the
past month the xserver-xorg-core which supposedly depends on xfonts did
not actually install any fonts.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsu
Package: apache2
Version: 2.2.3-3.2
There are 2 problems with /etc/default/apache2. The first is that it
exists. Are not daemons supposed to be enabled via runlevels?
I would consider providing a redundant mechanism for enabling/disabling
a daemon to be a bug because it impairs functionality th
>
> On Sun, Jan 21, 2007 at 09:37:51AM -0800, [EMAIL PROTECTED] wrote:
> > Sorry, this is not acceptable. This is *not* a bug with "my"
> > infrastrucuture.
>
> It is.
If it were a bug with "my" infrastructure, how could the problem occur
only with certain sites? Why would the problem occur a
I just wanted to add that not fixing it would be similar to having
kernels which refused to deploy an easily implemented bug workaround for
certain buggy CPUs and telling the thousands of unlucky end users to
live with it because their CPU's are just buggy.
--
To UNSUBSCRIBE, email to [EMA
Package: konqueror
Version: 3.5.5a.dfsg.1-5
Clicking on an image file in konqueoror opens it in the embedded viewer,
even though in the File Associations settings for Image group in
kcontrol it is set to "Use seperate viewer" and in konqueror it is set
to "Use Image group settings"
--
To
I found one other site discussing this issue and how/why it is a
political issue related to the Linux kernel:
http://groups.apu.edu/awg/node/101
"The recent 2.6.8 kernels have enabled TCP Window Scaling by
default"
"So why doesn't it work with Linux? Well the problem is not with Linux
at a
>
> tags 407735 wontfix
> severity 407735 minor
> thanks
>
I've been googling about this problem. It could be a problem with the
way many routers around the world are configured, yet only manifests
with particular Linux kernel versions. It may be that many network
admins need to change their c
Sorry, this is not acceptable. This is *not* a bug with "my"
infrastrucuture. It occurs regardless of what network I am on (and I
should know, I have a laptop). It is a bug with the kernel's handing of
tcp window scaling and it is a severe bug because at least 30 percent of
the sites around the
>
> tags 407735 wontfix
> severity 407735 minor
> thanks
>
> On Sat, Jan 20, 2007 at 01:13:43PM -0800, [EMAIL PROTECTED] wrote:
> > /proc/sys/net/ipv4/tcp_window_scaling is set to "1" be default in this
> > kernel. But there is a serious problem with this which causes severe
> > connection probl
Package: alsa-utils
Version: 1.0.13-2
On a laptop with an internal snd_hda_intel and external usb speakers
(which use snd_usb_audio). When alsaconf is run it detects only the
internal card. (It also shows "legacy Probe legacy ISA (non-PnP)
chips").
It does this regardless of whether snd_usb
Package: linux-image-2.6-686
Version: 2.6.18
/proc/sys/net/ipv4/tcp_window_scaling is set to "1" be default in this
kernel. But there is a serious problem with this which causes severe
connection problems for some connections. The user will experience this
as sites that fail to load, or begin
Package: python2.4-minimal
Version: 2.4.4-2
Severity: grave
This is similar to the last python2.4-minimal bug I reported in that the
package fails to configure. This time the offending package is
wikipediafs. Note that once I uninstalled wikipediafs (and in the other
case python-cairo) the co
Package: python2.4-minimal
Version: 2.4.4-2
Severity: grave
During dist-upgrade from testing -> unstable python2.4-minimal fails to
configure:
Setting up python2.4-minimal (2.4.4-2) ...
Linking and byte-compiling packages for runtime python2.4...
pycentral: pycentral rtinstall: package python
I totally second this. Even if its only when using the console for a
brief time right after a fresh minimal install - or perhaps when someone
new has just installed the system and X isn't working for them - this
bell is totally, nerve-wrackingly annoying and serves no useful
function. Please jus
Package: ktrack
Version: 0.3.0-alpha1-8.1
I can confirm this also. Here is the output of what appears to be a
relevant section of the strace:
32153 open("/usr/lib/i486-linux-gnu/i686/cmov/hamlib-dummy", O_RDONLY) = -1
ENOENT (No such file or directory)
32153 stat64("/usr/lib/i486-linux-gnu/i
For what its worth - I use Thinkpad laptops and noticed a problem with
the CD not spinning down up until very recently but as of right now I
cannot reproduce this problem at all. Something like this was
definitely happening but seems to have been resolved.
When I run the latest version of halt
Package: kmail
Version: 3.5.5.dfsg.1-2
Kmail's handling of account passwords has a seriously annoying bug. If
under account settings you tell kmail to store a POP password, then at
some point you answered yes to the dialog box asking to store passwords
in kwallet, then later decide you don't wan
>
> tag 321660 +moreinfo unreproducible
> thanks
>
> Hi!
>
> I cannot reproduce this behaviour. If it still applies, please provide
> detailed steps on how to reproduce.
>
I think this is a really old bug and probably irrelevant.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subj
Package: python2.4
Version: 2.4.3-9
upgrade fails. when it gets to the point where it says "Linking..." it
then complains about a symlink that already exists. I manually delete
the symlink and re-run upgrade and it complains about another. In all
it complains about maybe 20 symlinks that ar
Looks like just a typo in which the space got left out between the two
switches "--quiet --signal"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: klogd
Version: 1.4.1-19
After the most recent upgrade, klogd fails to restart when the daily
cron job is run. I must restart it manually.
Maybe this bug should be linked to the sysklogd package too because it
looks like its cron job may be involved.
The anacron daemon gives this c
Package: nvidia-kernel-source
Version: 1.0.8762-2
Running the nvidia module under 2.6.16.9 kernel. The same problem that
occured with version 1.0.8178-1 is still happening with my card, GeForce
FX Go5200: when I run startx it starts to display the nvidia logo but
the image distorts and is illeg
>
> This really isn't a bug if you aren't using the driver.
> There are libraries associated with the driver, nvidia-tls and libGL
> that expect the driver to be in use when loaded.
>
The only problem with that is, if the current nvidia driver happens to
be broke and unusable (for example the
Package: and
Version: 1.2.2-1
Setting up and (1.2.2-1) ...
Starting auto nice daemon: invoke-rc.d: initscript and, action "start" failed.
dpkg: error processing and (--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
and
in
>
> On Fri, May 12, 2006 at 11:20:14AM -0700, [EMAIL PROTECTED] wrote:
> [...]
> > This is what I have in xorg.conf:
> >
> > Section "InputDevice"
> > Identifier "Generic Keyboard"
> > Driver "keyboard"
> > Option "CoreKeyboard"
> > Option
it could be that its looking for a non-existent font. running strace on
audacity i see:
write(3,
"-\2\16\0\327\7\300\2*\0\300\2-*-helvetica-regular-*-*-*-*-*-*-*-*-*-*-*o8\227\1\3\0\327\7\300\2\1\0\0\0",
68) = 68
however xfontsel does not show that there *is* a helvetica-regular, only
hel
ln -s ~/.xsession ~/.xinitrc
I thought .xinitrc was being depracated though?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: xserver-xorg
Version: 7.0.16
There used to by the intl XkbLayout. I would have an InputDevice stanza
for the keyboard like the following:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Package: xbase-clients
Version: 7.0.1-1
startx fails the error message states:
/etc/X11/xinit/xinitrc: line 9: /etc/X11/Xsession: No such file or
directory
there is no /etc/X11/Xsession. is this legacy, not been updated to
account for /etc/X11/Xsession.d layout?
--
To UNSUBSCRIBE, e
i created a backport of systemimager to install on sarge clients since
my server is running sid. i get the same exact error message.
installing systemimager-boot-i386-standard solves the problem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
it looks like the issue might be related to the wamerican-large package
so i filed a bug there too
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: wamerican-large
Version: 5-4
something's really messed up with installing wamerican-large. let me
first copy-in a report i just filed against dictionaries-common. i
think the actual problem may be this package, but anyhow...
---
Package: dictionaries-common
Version: 0.25.12
I wanted enhanced security and so commented out the standard line in
/etc/pam.d/common-password:
password required pam_unix.so nullok obscure min=4 max=8 md5
and uncommented the last two lines:
password required pam_cracklib.so retry=3
> >
> > The Display resolution setting in the Fonts dialog window in the Content
> > tab of Preferences does not save. After setting it to a custom
> > resolution or one of the preset ones and closing the dialog, when it is
> > opened again the setting is gone. This also has the affect of causin
Package: firefox
Version: 1.5.dfsg+1.5.0.2-3
The Display resolution setting in the Fonts dialog window in the Content
tab of Preferences does not save. After setting it to a custom
resolution or one of the preset ones and closing the dialog, when it is
opened again the setting is gone. This also
with regard to the complaint about /etc/X11/X, I compared with another
system. on the other one it was a relative symlink, on the current
system with the error it was absolute. so i recreated it as relative,
identical to other system, but this complaint still occurs.
also, it is true that /var/
Package: xserver-xorg
Version: 1:7.0.15
Installation fails. here is the output:
Preconfiguring packages ...
xserver-xorg failed to preconfigure, with exit status 10
(Reading database ... 150223 files and directories currently installed.)
Preparing to replace xserver-xorg 1:7.0.14 (using
.../xs
FYI I just filed a bug report for nvidia-glx
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: nvidia-glx
Version: 1.0.8756-4
amarok, xmms, vlc, and mplayer to name a few. for example, i ran an
strace with vlc and the last shared object that gets loaded prior to
segfaulting is /usr/lib/libnvidia-tls.so.1
note that i'm currently using the Xorg nv driver due to another bug with
th
>
> > [...]
> > open("/usr/lib/libnvidia-tls.so.1", O_RDONLY) = 5
>
>This is the last shared object that is opened before the crash. As
> far as I know it is not part of Debian, so please try again without
> those NVidia libraries/drivers, and check that they are compatible with
> Xorg v7.
>
it looks like this was being caused by a shared object which is part of
Debian's nvidia-glx package. uninstalling nvidia-glx has caused the
problem to go away.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: vlc
Version: 0.8.5-test3.debian-3
vlc crashes when started. this suddenly started happening to several
apps after a recent sid upgrade which included the new xorg v.7 it is
one of several apps that is failing to start. the others are: xmms,
amarok, and mplayer. below is the last sec
Package: audacity
Version: 1.2.4b-2
the toolbars and drop-down menus contain no text
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
forgot to add this: everything in Xorg.log looks kosher, only it cuts
off abrubtly at the very end. Here are the last several lines:
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension
Package: nvidia-kernel-source
Version: 1.0.8756-4
not sure under what package to file this, so will file here. starting
xorg with nvdia driver screen goes blank. ctrl-alt-backspace has no
effect. machine must be hard-reset. card it:
nVidia Corporation NV34M [GeForce FX Go5200] (rev a1)
opt
Package: amarok
Version: 1.3.8-1+b1
fails to launch with the following output:
$ amarok
amaroK: [Loader] Starting amarokapp..
amaroK: [Loader] Don't run gdb, valgrind, etc. against this binary! Use
amarokapp.
amaroK: [Loader] amarokapp probably crashed!
ran an strace, below is some partial ou
I solved the issue. Even though a newer nvidia-kernel-source was
installed, m-a a-i nvidia did not upgrade the existing nvidia-kernel
package which I thought it would do.
I had to manually uninstall the old version nvidia-kernel package, delete
/usr/src/modules/nvidia-kernel and the older nvidia
Package: nvidia-glx
Version: 1.0.8756-4
After already having done m-a a-i nvidia which installed
nvidia-kernel-2.6.16-smp (1.0.8178-3) on my system, I then try in
install nvidia-glx but get the following error:
$ sudo apt-get install nvidia-glx
Reading package lists... Done
Building dependency
So wrote Justin Pryzby on Thursday, 9 March 2006:
> Date: Thu, 9 Mar 2006 18:38:19 -0500
> From: Justin Pryzby <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> Subject: Re: Bug#356122: lynx is unusable in sid
> User-Agent: Mutt/1.5.11+cvs20060126
>
> On Thu, Mar 09, 2006 at 03:31:
So wrote Justin Pryzby on Thursday, 9 March 2006:
> Date: Thu, 9 Mar 2006 17:35:21 -0500
> From: Justin Pryzby <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> Subject: Re: Bug#356122: lynx is unusable in sid
> User-Agent: Mutt/1.5.11+cvs20060126
>
> On Thu, Mar 09, 2006 at 01:46:
>
> On Thu, Mar 09, 2006 at 12:17:57PM -0800, [EMAIL PROTECTED] wrote:
> > Package: lynx
> > Version: 2.8.5-2sarge1
> > Severity: high
> This isn't a valid severity
>
> > Lynx has some serious problem. When it is started from the
> > command-line, is simply displays a blank screen with the text
Package: lynx
Version: 2.8.5-2sarge1
Severity: high
Lynx has some serious problem. When it is started from the
command-line, is simply displays a blank screen with the text at the
bottom:
desc=microsoft D)ownload, or C)ancel
this almost looks like some kind of malicious trojan or something!
Package: readline-common
Version: 5.1-5
setting
set bell-style none
in /etc/inputrc has no effect
but
set bell-style visible
does have an effect
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: cupsys
Version: 1.1.23-13
There is a line at the end of cupsd.conf:
Include /etc/cups/cups.d/ports.conf
ports.conf has the entry "Port 631" but this line also occurs in
above cupsd.conf. To fix it I commented out the entry in cupsd.conf and
restarted cupsys.
--
To UNSUBSCRIBE, ema
Package: ntp-server
Version: 1:4.2.0a+stable-8.1
>From the description of ntp-server it says "This package holds the common
>files for the NTP server and all programs which need to run on the actual
>server." The name of the package seems to indicate that it is an ntp server,
>not components
Package: ntp-server
Version: 4.2.0a+stable-8.1
The man pages provided with ntp-server are deficient. Example:
# man 1 ntptime
NTP(1) NTP(1)
NAME
ntp - the network time protocol
DESCRIPTION
The NTP distribution do
Package: portmap
Version: 5-16
Severity: grave
Ok so maybe I'm wrong reporting this as grave, but:
[EMAIL PROTECTED]:~#grep 'default' /etc/inittab
# The default runlevel.
id:2:initdefault:
[EMAIL PROTECTED]:~# runlevel
N 2
[EMAIL PROTECTED]:~# ls *ortmap* /etc/rc2.d/
ls: *ortmap*: No such file
Package: openbox
Version: 3.2-7
Some application launches are creating a busy cursor in Openbox. For
example, even when I have "launch feedback" totally disabled for an
application file type in konqueror, when konqueror launches the app and
openbox is running, there is a busy cursor which lasts f
Package: gcc-4.0
Version: 4.0.1-9
This is to report that the same error is occuring also with 4.0.1-9
when i "make modules_install" on a 2.6.13 kernel it gives many warnings
regarding snd-usb-audio such as:
lib/modules/2.6.13-smp/kernel/sound/usb/snd-usb-audio.ko needs unknown symbol
__compou
Package: gcc-4.0
Version: 4.0.1-8
when i "make modules_install" on a 2.6.13 kernel it gives many warnings
regarding snd-usb-audio such as:
lib/modules/2.6.13-smp/kernel/sound/usb/snd-usb-audio.ko needs unknown symbol
__compound_literal.145
After downgrading to gcc-4.0_4.0.1-6 the error disapp
Package: konqueror
Version: 3.4.2-2
When launching applications from konqueror, there is always a busy
cursor. I am using Openbox window manager. In kcontrol I have "No
theme" selected for cursor theme. I have all options for launch
notification and launch feedback disabled. The busy cursor ca
Package: openvpn
Version: 2.0.2-1
When the rc script is invoked with the "start" option, openvpn will just
start a second instance of openvpn, even if a first one is already
running or had not shut down properly. I think this could be avoided by
having something like this in the rc script:
if !
Package: kdelibs4
Version:
Severity: grave
Many if not most KDE packages are not installabe in Sid because:
The following packages have unmet dependencies:
konqueror: Depends: kdelibs4 (>= 4:3.3.2-1) but it is not installable
# apt-get install kdelibs4
Reading package lists... Done
Building
Package: debian-installer
Version: 2005.08.23
Downloaded the latest testing netinst. Initial install went fine, but
after reboot tty1 is blue with text flashing repeatedly the message that
it is installing the base system. Then is stops and there is the text:
grep: menu/.mnu: No such file or di
I too confirm this bug. When it crashes there is no output. Strace
output also appeared to not be very useful. The fix mentioned above
does work:
If you are running Sid and have the kdelibs4 and kdelibs-bin version 3.3.2-7
installed:
1. go to snapshot.debian.net
(http://snapshot.debian.net/arc
Package: konqueror
Version: 3.3.2-1
After changing entries under "Edit file type" the "Open with" menu for a
particular file type does not reflect the changes that were just made.
If the default application to open a file type is changed and a file is
left-clicked to open, it will open with the p
please cancel this. i didn't see the mta line in reportbug.conf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: reportbug
Version: 3.15
Severity: wishlist
Would it be possible to add a sendmail= option to reportbug.conf ala
muttrc? This would enable more flexibility when mailing.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
i just checked packages.debian.org and both versions there are g1 so i
don't know how g2 got on my system.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: libssl-dev
Version: 0.9.7g-1
In Sid libssl-0.9.7g-2 is the current version. libssl-dev will not
install because it depends on libssl=0.9.7g-1
# apt-get install libssl-dev
Reading package lists... Done
Building dependency tree... Done
Some packages could not be installed. This may mean
This bug still exists. Sendmail fails to install:
The following packages have unmet dependencies:
sendmail: Depends: sendmail-base (= 8.13.4-3) but 8.13.4-4 is to be
installed
Depends: sendmail-bin (= 8.13.4-3) but it is not going to be
installed
Depends: sendmail-cf (
1 - 100 of 117 matches
Mail list logo
