Package: installation-reports
Boot method: Flashing eMMC
Image version:
https://raspi.debian.net/verified/20210718_raspi_4_bullseye.img.xz
Date: 20-08-2021, 15:08
Machine: Raspberry Pi Compute Module 4 IO Board
Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC
Memory: 8G
Hi Cyril,
Appreciate the swift response, hopefully the raspi team can help.
> You didn't need any extra DTB to get your CM4 to boot?
No other steps were needed just wrote the image to the eMMC with balena and
plugged it in.
Thanks again,
Lucas
Fro
Package: installation-reports
Debian-installer-version: Nightly Build: > Beta4, Week of July 25, 2004
uname -a: Linux logos 2.6.7-1-686-smp #1 SMP Thu Jul 8 06:08:37 EDT
2004 i686 GNU/Linux
(I upgraded kernel-package)
Date: August 8, 2004
Method: Booted off CD, net-install, no proxy.
Machine: Inte
Hi!
I'm in the process of translating a pot file for the spanish l10n. I
need access to the svn repo. My alioth account is kthulhu-guest. Thanks!
K.
--
Lucas Wall <[EMAIL PROTECTED]>
Buenos Aires, Argentina
http://www.kadath.com.ar
PGP 1024D/84FB46D6
Christian Perrier wrote, On 06/17/2004 03:48 AM:
Lucas, spanish is currently 100% translated in core d-i, so what is
needed for commiting (of course, there are a lot of valid reasons
anyway, such as proofreading and error corrections)?
Hmmm... Never mind. A couple of hours ago I checked the es
On 21/01/19 at 10:55 +0100, Lucas Nussbaum wrote:
> Package: apt-setup
> Severity: normal
>
> Hi,
>
> We use d-i weekly images[1] to create Debian testing system images. Our
> installation process is fully automated with preseeding.
>
> The installation process hangs
cript-Name: bootscr.sunxi
Required-Packages: u-boot-tools
Thanks
Lucas
-- System Information:
Debian Release: 9.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: armhf
Kernel: Linux 4.18
Source: netcfg
Version: 1.169
Severity: serious
Justification: FTBFS on amd64
Tags: bullseye sid ftbfs
Usertags: ftbfs-20210120 ftbfs-bullseye
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> cc -c -W -Wall -Werror -DNDEBUG -DNETCFG
e notes
The main blocking factor for progress seems to be that not enough people
have both hardware that is not supported (laptops/desktops with AMD or
NVidia graphic cards), and the knowledge and time to investigate this.
Lucas
mple,
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931436
was about the RC2 for the buster installer.
Thanks
Lucas
x27;s somewhat older hardware with 'radeon' module.
> Thus it does not stand for the "amdgpu firmware problem", I fear.
I don't understand:
does this mean that the issue that you reported in
https://lists.debian.org/debian-boot/2020/12/msg00026.html can be
considered fixed? And that the situation improved between buster and
bullseye?
Lucas
at the other reports I quoted in my mail above for more user
> cases.)
But aren't all those other reports from either the buster installer, or
from installers for releases before buster?
Lucas
could be achieved for an installer that has non-free enabled,
> provided the proposal by Ben gets implemented, then consumed on the d-i
> side.
For reference, I think Ben's proposal is:
https://lists.debian.org/debian-boot/2021/03/msg00088.html
Lucas
Source: debian-installer-netboot-images
Version: 20220917+rebuild1
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lu...@debian.org
Usertags: ftbfs-20230216 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (ho
Hi,
On 17/02/23 at 13:07 +0100, Cyril Brulebois wrote:
> Version: 20230217
>
> Hi Lucas,
>
> Lucas Nussbaum (2023-02-17):
> > Source: debian-installer-netboot-images
> > Version: 20220917+rebuild1
> > Severity: serious
> > Justification: FTBFS
&g
initrd,
how can we help?
Regards,
--
Lucas Bonnet
Bearstech - http://bearstech.com
Source: rootskel
Version: 1.136
Severity: serious
Justification: FTBFS
Tags: trixie sid ftbfs
User: lu...@debian.org
Usertags: ftbfs-20240702 ftbfs-trixie
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[3]: Entering directory
Source: console-setup
Version: 1.195
Severity: serious
Justification: FTBFS on amd64
Tags: bullseye sid ftbfs
Usertags: ftbfs-20200620 ftbfs-bullseye
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering directory '/<>'
Source: console-setup
Version: 1.205
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> Compiling compact keymaps for amiga...
> Compiling compact keymaps for ataritt...
Source: oldsys-preseed
Version: 3.22
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lu...@debian.org
Usertags: ftbfs-20211023 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering
ed by this issue.
This mass bug filing was discussed on debian-devel@ in
https://lists.debian.org/debian-devel/2021/11/msg00052.html .
The severity of this bug will be changed to 'serious' after a month.
Best,
Lucas
aspects as well.
This mass bug filing was discussed on debian-devel@:
https://lists.debian.org/debian-devel/2022/03/msg00074.html
Thanks
Lucas
Source: debian-installer
Version: 20220917
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lu...@debian.org
Usertags: ftbfs-20221220 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[2]: Ent
I'm having the same issue on GRUB, also on a 2 IDE hard disc, after
installing debian 8.2.0 (2015-09-09). The first IDE contains windows. As
I've always done, I choose installing grub at the beginning of the second
one, dedicated exclusively to linux (where installation was carried out).
After inst
Source: win32-loader
Version: 0.8.2
Severity: serious
Tags: stretch sid
User: debian...@lists.debian.org
Usertags: qa-ftbfs-20170418-i386 qa-ftbfs
Justification: FTBFS in stretch on i386
Hi,
During a rebuild of all packages in stretch (in a stretch chroot, not a
sid chroot), your package failed t
On 24/04/15 at 09:38 +0200, Lucas Nussbaum wrote:
> On 18/02/13 at 07:28 +0800, Paul Wise wrote:
> > On Sun, 2013-02-17 at 23:24 +0100, Philipp Kern wrote:
> >
> > > Now I'm not sure why we're checking for a link in netcfg_autoconfig
> > > again with
On 31/08/16 at 11:26 +0800, Paul Wise wrote:
> On Tue, 2016-08-30 at 17:48 +0200, Lucas Nussbaum wrote:
>
> > What you put in the preseeding file has no effect for network
> > detection (at least in the case where this file is fetched over the
> > network).
>
> The
On 31/08/16 at 13:15 +0800, Paul Wise wrote:
> On Wed, 2016-08-31 at 07:10 +0200, Lucas Nussbaum wrote:
>
> > Well, FTR it's exactly the kind of hardware I was using yesterday
> > (with the current jessie installer)
>
> Did you try with the cable plugged into only e
category `LC_ADDRESS'
> LC_IDENTIFICATION: unknown standard `C@utf-8:2000' for category `LC_TELEPHONE'
> LC_IDENTIFICATION: unknown standard `C@utf-8:2000' for category
> `LC_IDENTIFICATION'
> no output file produced because warnings were issued
>
rd-configuration/toggle select No toggling
Same for http://www.debian.org/releases/jessie/example-preseed.txt
Also, is there a way to find the list of valid values?
d-i keyboard-configuration/xkb-keymap select fr
did not work for me. I haven't tried fr(latin9). I guess it would have
worked...
-i netcfg/choose_interface select eth2" and BOOTIF in
/proc/cmdline, and I still get prompted.
With "d-i netcfg/choose_interface select eth2" and no BOOTIF in /proc/cmdline,
I also get prompted! So this is more severely broken than I thought.
Lucas
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/20150424073828.ga11...@xanadu.blop.info
Source: ttf-cjk-compact
Version: 1.20
Severity: serious
Tags: jessie sid
User: debian...@lists.debian.org
Usertags: qa-ftbfs-20130620 qa-ftbfs
Justification: FTBFS on amd64
Hi,
During a rebuild of all packages in sid, your package failed to build on
amd64.
Relevant part:
> ┌─
ss about d-i development, so I would need some help,
unfortunately.
Lucas
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20130815220035.ga17...@xanadu.blop.info
Package: installation-reports
Debian-installer-version: 05-25-06
uname -a: Linux comp3 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686
GNU/Linux
Date: 05-25-06
Method: CD
Machine: Generic
Processor:AMD Athlon(tm) XP 2000+
Memory:1GIG
Root Device: IDE,highpoint controller
Root Size/partition tab
Package: installation-reports
Version: Beta-4
Result:
Can't login if AllowedUsers is set in ssh in beta-4 with default ipv6
install.
Steps to Reproduce:
Install beta-4 with enabled ipv6 support, the default.
Install ssh.
In my case stable versin of ssh.
Configure ssh to only:
allow public-key lo
available, but is referred to by
> another package.
> This may mean that the package is missing, has been obsoleted, or
> is only available from another source
> E: Package linux-image-2.6.24-1-486 has no installation candidate
The full build log is available from:
http://people.debia
On 07/05/08 at 12:02 +0200, Frans Pop wrote:
> Hi Lucas,
>
> On Wednesday 07 May 2008, Lucas Nussbaum wrote:
> > During a rebuild of all packages in sid, your package failed to build on
> > i386.
>
> I thought we'd agreed that trying to rebuild the linux-kernel-
urces from 16:34 GMT 30-Mar-2008.
> Library based on sources from 15:57 GMT 30-Mar-2008.
> The requested file, uming.ttf, does not exist
> Open: Failed to open: /usr/share/fonts/truetype/arphic/uming.ttf
> Called from...
> ./stripttf.ff: line 13
> make: *** [build-stamp] Error 1
Package: installation-reports
I try to install Debian on a RAID 0, using the "install dmraid=true" command.
Boot method: iso DVD
Image version: Lenny for amd64, downloaded in April 2008
Date: 26/06/08
Machine: MoBo Asus M2N sli Deluxe, 2 Maxtor HDD
Processor:AMD athlon x2 3.2Ghz
Memory:2 Gb
er
> -falign-functions=0 -falign-jumps=0 -falign-loops=0 -Os -Wall -c -o init.o -x
> c init.c failed at /usr/bin/klcc line 138
> make[2]: *** [init] Error 255
The full build log is available from:
http://people.debian.org/~lucas/logs/2008/07/02
A list of current common problems
it out.
So I tried to use a older image, but then I have other
compatibility problems, mostly because of differences between
versions.
The MacOS is already unninstalled.
What can I do?
Thanks!
--
Lucas Rossi
Gerência de Informática
Gerência de Relações Públicas
PET Metrologia e Automação
ftp://ftp.debian.org/debian/dists/stable/main/installer-powerpc/current/images/powerpc/floppy
Thank you
Citando Wouter Verhelst <[EMAIL PROTECTED]>:
On Tue, Dec 12, 2006 at 07:33:42AM -0200, Lucas Rossi wrote:
Hi folks!
Sven told me to post this here on debian-bo
Thank you very much!!
I'll try it as soon as I can and let you know if it worked...
=)
Citando Sven Luther <[EMAIL PROTECTED]>:
On Wed, Dec 13, 2006 at 09:06:30AM -0200, Lucas Rossi wrote:
ftp://ftp.debian.org/debian/dists/stable/main/installer-powerpc/current/ima
Unfortunately the images didn't work, man...I just tested here...
=/
Regards,
Lucas Rossi
Citando Holger Levsen <[EMAIL PROTECTED]>:
Hi,
The miboot enabled d-i sarge floppies for oldworld powerpc are now
available again, you can find them at
http://layer-acht.org/d-i-miboot
ner I can't help you with the advanced stuff...it's the first
time I'm installing Debian in a Mac.
I'll help the way I can, by testing...;-)
Thank you for your time...I hope we can find a solution to this.
Lucas Rossi
Citando Holger Levsen <[EMAIL PROTECTED]>:
Hi L
Citando Holger Levsen <[EMAIL PROTECTED]>:
Hi Lucas,
On Friday 15 December 2006 15:32, you wrote:
As I said,
you didn't (until now) ;)
Sorry, you probably didn't read my very fisrt mail, that exposed
the problem...
the computer just spits out the disks,
hat it can solve this by installing
first debconf, then x11-common, then cdebconf...
--
| Lucas Nussbaum
| [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of &q
actually build debian-installer if I'm only backporting debian's
partman to ubuntu ?)
Thank you,
--
Lucas Nussbaum
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
long device names
(/dev/ide/host0/bus1/target0/lun0/disc) are available and why sometimes
the old short ones (/dev/hdc) are? And finally, will I be able to
migrate to 2.6 without breaking the RAID?
To summarise, if I boot up with the 2.4 kernel, but install the 2.6
kernel, RAID doesn't work
d-extra-boot=mbr-only (to install only into the MBR of each member
device of the RAID). From my testing, debian-installer does not do this.
My hunch is that the error that Alexander and I get has something to do
with different device names: /dev/md/0 vs /target/dev/md0, but I am
fully prepared to
27;t know which modules are conflicting,
I could probably take some time to figure it out if anyone's interested,
but I could be the only person to ever see this problem...
Regards,
--
Lucas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Martin Michlmayr ([EMAIL PROTECTED]) wrote:
> If anyone is interested in the following machine for development,
> please get in contact with [EMAIL PROTECTED]
>
>
> * Christophe Lucas <[EMAIL PROTECTED]> [2006-03-25 19:26]:
> > RotomaLUG(http://www.rotomalug.org/) i
his may mean that the package is missing, has been obsoleted, or
> is only available from another source
> E: Package loadlin has no installation candidate
The full build log is available from:
http://newpeople.debian.org/~lucas/logs/2008/09/03
It is possible that your package builds fine
ouldn't find package libparted1.7-dev
The full build log is available from:
http://newpeople.debian.org/~lucas/logs/2008/09/03
It is possible that your package builds fine in sid, but you should make sure
that your package also builds fine in lenny before the release.
A list of current common pr
ts...
> Building dependency tree...
> Reading state information...
> E: Couldn't find package libparted1.7-dev
The full build log is available from:
http://newpeople.debian.org/~lucas/logs/2008/09/03
It is possible that your package builds fine in sid, but you should make sure
that your
On 03/09/08 at 18:15 +0300, Martin Michlmayr wrote:
> * Lucas Nussbaum <[EMAIL PROTECTED]> [2008-09-03 16:34]:
> > Package: partconf
>
> Is there some way you can ignore packages that only build udebs?
>
> Those packages will be synced when rc1 is out and then they&#x
Frans Pop a écrit :
On Thursday 26 June 2008, Werquin Lucas wrote:
Partition hard drives: [E]
-> Every partition seem to be created correctly, but finaly the SWAP
fails. After that, the partition manager shows a pri/log ext3
partition. I tried to delete this to retry the process.
Frans Pop a écrit :
On Monday 06 October 2008, Werquin Lucas wrote:
Actually, I've already installed Debian on a RAID with a most recent
dvd.
The DVD does not yet have the latest improvements, so the grub error can
be explained from that. You'll need to use one of the d
tzsetup-0.21'
> ./gen-templates < debian/common.templates.in > debian/common.templates
> /usr/share/iso-codes/iso_3166.tab: No such file or directory at
> ./gen-templates line 13.
> make[1]: *** [tzmap] Error 2
The full build log is available from:
http://newpeople.debian.o
Since the last update of dmraid, i have rebooted my server and still
have a problem with the GRUB update.
I still have to edit the first entry of the GRUB list to replace
(nvidia) with (hd0,1) before booting.
I'll edit the menu.lst file and wait the next linux-headers update to
see what
I'm missing the point??
Thanks a lot in advance for any direction and help.
Regards
Lucas Brasilino
[1] http://www.mail-archive.com/debian-boot@lists.debian.org/msg97142.html
[2] http://www.mail-archive.com/debian-boot@lists.debian.org/msg97160.html
--
To UNSUBSCRIBE, email to debian-bo
Hi !
Have you ever tried simple-cdd ?? It's (almost) painless :-).
regards
Lucas Brasilino
2009/2/3 Danny Brown :
> Trying to add all packages installed after initial configuration.
> Apt-move /var/cache/apt/archives ... works fine. Rsync to copy of
> debian cd. Md5sum fix.
I use it, in a lenny box, to generate etch images with no major problem.
I think you read that it not works _on_ etch. I've never tried this way.
regards
Lucas Brasilino
2009/2/3 Danny Brown :
> I read somewhere that it does not work well with etch. Do you know if
> it does.
or code 1
> Info: creating temporary .html file...
> Info: creating .txt file...
> Warning: The following formats failed to build: pdf
> make: *** [build-stamp] Error 2
> dpkg-buildpackage: failure: debian/rules build gave error exit status 2
The full build log is available from:
stallation candidate
> apt-get failed.
> Package installation failed
> Trying to reinstall removed packages:
> Trying to uninstall newly installed packages:
> Source-dependencies not satisfied; skipping linux-kernel-di-i386-2.6
The full build log is available from:
http
d package loop-aes-modules-2.6.22-3-486
> apt-get failed.
> Package installation failed
> Trying to reinstall removed packages:
> Trying to uninstall newly installed packages:
> Source-dependencies not satisfied; skipping linux-modules-di-i386-2.6
The full build log is available
[1]: Leaving directory `/build/user/choose-mirror-2.20'
> make: *** [build-stamp] Error 2
> dpkg-buildpackage: failure: debian/rules build gave error exit status 2
The full build log is available from:
http://people.debian.org/~lucas/logs/2008/01/11
A list of current common pro
On 12/01/08 at 20:36 +0100, Frans Pop wrote:
> On Saturday 12 January 2008, Lucas Nussbaum wrote:
> > Package: choose-mirror
> >
> > Seems like your "online detection" is failing?
>
> It's not set anywhere, so I expect the intention is that the person
ym "Hangul"
> WARNING: Unknown X keysym "Hangul"
> ./ckbcomp: instead of "}" in pt expected };.
> ./kbdcompiler: ckbcomp failed
> make[1]: *** [amiga.ekmap] Error 2
> rm amiga.ekmap
> make[1]: Leaving directory `/build/user/console-setup-1.20/Key
4 primary ext3
/dev/scsi/host4/bus0/target0/lun0/part1
/lib/partman/choose_partition/60partition_tree/choices: paragraph:
2 1003484160-500105249279 499101765120primary unknown
/dev/scsi/host4/bus0/target0/lun0/part2
parted_server: main_loop: iteration 136
parted_server: Opening in
t 2 of
> 'question_get_field' from incompatible pointer type
> newt-plugin-entropy-text.c:232: error: too few arguments to function
> 'question_get_field'
> make[1]: *** [newt-plugin-entropy-text.opic] Error 1
The full build log is available from:
http://people.debian.or
1-486-di
> lib/modules/2.6.24-1-486/kernel/lib/crc-itu-t.ko
> debian/firewire-core-modules-2.6.24-1-486-di
> lib/modules/2.6.24-1-486/kernel/lib/crc-itu-t.ko
> command exited with status 1
> make: *** [binary-arch] Error 2
The full build log is available from:
http://people.debian
to autobuild the package on a buildd with no
network access.
- The test has a high probability to fail lateron because of the
referenced host (temporarily) disappearing.
Making ONLINE default to "n" would probably solve the problem.
Thank you,
--
| Lucas Nussbaum
| [EMAIL PROTECTE
severity 395262 important
tags 395262 + patch
thanks
(setting severity to important since that's probably what you wanted to
do :-)
On 25/10/06 at 15:15 -0700, Steve Langasek wrote:
> tags 395262 important
> thanks
>
> On Wed, Oct 25, 2006 at 11:28:45PM +0200, Lucas Nussbaum wr
On 26/10/06 at 00:47 +0200, Frans Pop wrote:
> On Wednesday 25 October 2006 23:28, Lucas Nussbaum wrote:
> > Making ONLINE default to "n" would probably solve the problem.
>
> That is a very bad idea as it would mean we don't have any (up-to-date)
> mirror selec
On 26/10/06 at 01:27 +0200, Frans Pop wrote:
> On Thursday 26 October 2006 00:27, Lucas Nussbaum wrote:
> > I would recommend changing the wget call so that it runs wget
> > --timeout=60 --tries=2, which would be much more tolerable than waiting
> > for 20*900=18000 seconds.
&
(Cced the relevant bug report)
On 31/10/06 at 23:50 -0500, Anthony DeRobertis wrote:
> Lucas Nussbaum wrote:
>
> > Some packages (e.g choose-mirror) fetch a newer version of a file during
> > build if it's possible to fetch that file. I don't think this is RC,
>
:43 31-Aug-2007.
File "./stripttf", line 8
if ($argc < 4)
^
SyntaxError: invalid syntax
make: *** [build-stamp] Error 1
The full build log is available from
http://people.debian.org/~lucas/logs/2007/09/17
A list of current common problems and possible solutions is avail
sh
> templates/sv.nsh templates/th.nsh templates/tr.nsh templates/zh_CN.nsh
> templates/zh_TW.nsh ; do echo "; BEGIN $i" ; cat $i ; echo "; END $i" ; done
> > templates/all.nsh
> for i in be bg ca cs de el en es eu fi fr gl he hr hu it ja ko lt nb nl pl pt
>
kmap.gz pc105.ekmap.gz
> sun4.ekmap.gz sun5.ekmap.gz
> rm -f MyKeyboardNames.pl
> ./xmlreader >KeyboardNames.pl
> Couldn't open ckb/rules/xorg.xml:
> No such file or directory at ./xmlreader line 67
> make[2]: *** [maintainer-clean] Error 255
The full build log
On 12/12/09 at 14:58 +0200, Anton Zinoviev wrote:
> tags 560570 unreproducible
> thank you
>
> On Fri, Dec 11, 2009 at 09:54:15AM +0100, Lucas Nussbaum wrote:
> > Source: console-setup
> > Version: 1.50
> > Severity: serious
> > User: debian...@lists.debian.or
t; token "("
> make[1]: *** [text-plugin-entropy.opic] Error 1
The full build log is available from:
http://people.debian.org/~lucas/logs/2009/12/13/cdebconf-entropy_0.12_lsid64.buildlog
A list of current common problems and possible solutions is available at
http://wiki.debia
e: *** [build_cdrom_isolinux] Error 2
So, It's clear that the modified rootskel-gtk (version 1.16) is not
getting selected for installation. But, why ?
Now udebs must be signed ? Is there any other issue I'm forgetting ?
Thanks a lot in advance for any help.
Lucas Brasilino
--
To UNSU
caludebs to it.
Thanks a lot, it works!!
But, I'm just curious: Since sources.list.udeb is
generated from sources.list.udeb.local plus some convenient
repositories (localudebs
and debian-multimedia), this file should be used by d-i build process,
shouldn't it ?
regards
Lucas Brasilin
puid/plugin.c:31: error: expected '=', ',', ';', 'asm' or
> '__attribute__' before 'WINAPI'
> make[1]: *** [plugins/cpuid/test64.dll] Error 1
The full build log is available from:
http://people.debian.org/~lucas/logs/2010/02/11/w
#x27;etch-proposed-updates' with no sucess.
Since it's the kernel version used in Debian4.0r7, I think it's
suitable to be used :-)
Any help ?
Thanks a lot in advance
Lucas Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
ut the lenny
'etchnhalf' code ?
> The Etch installer is not guaranteed to work correctly with a .26 kernel!
OK, Thanks for the advice :-)
Regards
Lucas Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe&qu
half' installation. Of course I'm no sure
so I was just careful.
But thanks a lot! I'll try it.
regards
Lucas Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
mplates/zh_CN.nsh
> templates/zh_TW.nsh ; do echo "; BEGIN $i" ; cat $i ; echo "; END $i" ; done
> > templates/all.nsh
> for i in be bg ca cs de el en es eu fi fr gl he hr hu it ja ko lt nb nl pl pt
> pt_BR ro ru sk sq sv th tr zh_CN zh_TW ; do \
>
cally simple-cdd-profiles udeb is loaded by:
d-i preseed/early_command string anna-install simple-cdd-profiles
in a preseed file. Once added to d-i (installed) it's postinst script
calls "debconf-loadtemplate"[3].
I used this way and it still working quite well.
regards
libc/include/stdio.h:11,
> from init.c:14:
> /usr/lib/klibc/include/linux/posix_types.h:47:29: fatal error:
> asm/posix_types.h: No such file or directory
> compilation terminated.
> make[2]: *** [init] Error 1
The full build log is available from:
http://people.debian.org/~luca
packages
The full build log is available from:
http://people.debian.org/~lucas/logs/2012/03/31/installation-guide_20110122_unstable.log
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
About the
tags 385919 - moreinfo
reassign 385919 wnpp
retitle 385919 O: bogl -- Ben's Own Graphics Library - graphical terminal
thanks
On 20/02/11 at 14:18 +0100, Alexander Reichle-Schmehl wrote:
> tags 385919 + moreinfo
> thanks
>
> Hi!
>
>
> * Lucas Nussbaum [110220 08:41
Hi
> Fixed it, i downloaded the udeb and placed it in build/localudebs
>
You can also set a "sources.list.udeb.local" file. Doing so d-i build process
will pull necessary udebs from a repository.
regards
Lucs Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a s
ying README.html and README.txt into your local
repository's root directory.
regards
Lucas Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/t2h9ad205141004121649w44158c2qb81e5fa6607bf...@mail.gmail.com
rsion 2.6.32-3-686.
>
> How can this be fixed?
Well, did you push kernel 2.6.32-3-486 udeb's to your repository (in
main/debian-installer section) ?
regards
Lucas Brasilino
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscrib
e boot minicmd cat cpuid chain halt help
> ls reboot
> Try `grub-mkimage --help' for more information.
> Target not specified.
> make[2]: *** [core.img] Error 1
The full build log is available from:
http://people.debian.org/~lucas/logs/2010/06/02/win32-loader_0.6.16_lsid64.buildlog
A l
for source dependency conflicts...
> E: Couldn't find package discover1-data
The full build log is available from:
http://people.debian.org/~lucas/logs/2010/06/24/usb-discover_1.08_lsid64.buildlog
A list of current common problems and possible solutions is available at
http://wiki.debia
unciona corretamente, o problema é a hora que eu vou iniciar o windows, ele continua dizendo a mesma mensagem acima.
Gostaria que alguém de ajudasse dando uma solução para este problema.
Desde já agradeço.
Lucas André Maldaner.
__Convers
tioning)
> Writing build.out/html/apds01.html for sect1(linuxdevices)
> Writing build.out/html/apds02.html for sect1(tasksel-size-list)
> Writing build.out/html/apds03.html for sect1(linux-upgrade)
> Writing build.out/html/apds04.html for sect1(plip)
> Writing build.out/html/apds05.h
1 - 100 of 113 matches
Mail list logo
