Cubox-i: Kernel-Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000

end trace ]--- Any idea or hint what could cause this is welcome. Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Video Decoding on imx6 with Debian

. Rainer Am Sonntag, 3. November 2024, 15:24:38 CET schrieb Rainer Dorsch: > Hello, > > does anybody have a working gstreamer pipeline for the imx6 with HW video > decoding? > > Following https://trac.gateworks.com/wiki/ventana/vpu I setup the HW and > gstreamer reports >

Video Decoding on imx6 with Debian

ULL ... Freeing pipeline ... When I use gstreamer's playbin, I get no errors, but the video is not displayed properly and on the output are messages that the HW is too slow (I assume in this case the HW decoder is not used). Any idea or hint is welcome. Many thanks Rainer -- Rainer Dorsch http://bokomoko.de/

MOCHAbin

Hi, does anybody own a MOCHAbin hardware? If yes, can you share the idlepower of the device (ideally running Debian)? Can you think of anything else, which is worthwhile to consider before ordering a device? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: device name changed after upgrade to bookworm [was: Cubox-i bullseye -> bookworm Upgrade failure]

ools. Hope that helps Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Cubox-i bullseye -> bookworm Upgrade failure

Am Dienstag, 29. August 2023, 17:24:30 CEST schrieb Steve Langasek: > On Tue, Aug 29, 2023 at 02:38:20PM +0200, Rainer Dorsch wrote: > > Am Dienstag, 15. August 2023, 21:31:50 CEST schrieb Steve Langasek: > > > > How about alerting end-user that "did you know your i

Re: Cubox-i bullseye -> bookworm Upgrade failure

ives and false negatives) message during the upgrade, that would be much better. Users tend not to read release notes... Also I think the issue goes much beyond ifupdown, e.g. shorewall uses network interface names in its config files as well. Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Cubox-i bullseye -> bookworm Upgrade failure

Am Freitag, 4. August 2023, 09:57:18 CEST schrieb RobJE Debian ARM: > Hi, > > On 04-08-2023 08:55, Rainer Dorsch wrote: > > Hi, > > > > I did a test installation with a bullseye installer on a cubox-i and then > > upgraded to bookworm. After the upgrade t

device name changed after upgrade to bookworm [was: Cubox-i bullseye -> bookworm Upgrade failure]

issues. Rainer Am Freitag, 4. August 2023, 08:55:21 CEST schrieb Rainer Dorsch: > Hi, > > I did a test installation with a bullseye installer on a cubox-i and then > upgraded to bookworm. After the upgrade the network was gone. Even booting > with the previous kernel 5.10.0-23-armmp

Cubox-i bullseye -> bookworm Upgrade failure

quot;profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm- dhcp-helper" pid=382 comm="apparmor_parser" [ 21.966793] audit: type=1400 audit(1691131015.068:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/ dhclient-script" pid=382 comm="apparmor_parser" [ 21.984009] audit: type=1400 audit(1691131015.084:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=382 comm="apparmor_parser" root@test-machine:~# Many thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Installation of bookworm on cubox-i

Am Samstag, 18. März 2023, 23:17:04 CET schrieb Diederik de Haas: > On Saturday, 18 March 2023 22:37:55 CET Rainer Dorsch wrote: > > Any feedback is welcome :-) > > Please report installation issues to debian-boot@l.d.o Many thanks. For reference: https://lists.debian.org/debi

Installation of bookworm on cubox-i

machine. │ ││ │ Any feedback is welcome :-) Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: cubox-i does not boot after upgrade to bullseye

Am Mittwoch, 29. Dezember 2021, 19:39:18 CET schrieb Vagrant Cascadian: > On 2021-12-29, Rainer Dorsch wrote: > > Am Montag, 27. Dezember 2021, 18:22:43 CET schrieb Vagrant Cascadian: > >> If you can insert the microSD into another Debian machine, you can get > >> th

Re: CONFIG_VIDEO_CODA is not set

Hi Uwe, Am Montag, 28. Dezember 2020, 16:00:18 CET schrieb Uwe Kleine-König: > Hallo Rainer, > > On 12/25/20 10:43 PM, Rainer Dorsch wrote: > > I just installed bullseye with the daily installer on a cubox-i. I noticed > > that > > > > # CONFIG_VIDEO_CODA is

CONFIG_VIDEO_CODA is not set

not set which could be a useful module for some imx users: https://www.cateee.net/lkddb/web-lkddb/VIDEO_IMX_PXP.html Many thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: bullseye-installer fails on Cubox-i due to networking issue

staller, I think the topic can be considered as resolved. Thanks again Rainer Am Donnerstag, 24. Dezember 2020, 17:42:31 CET schrieb Arnd Bergmann: > On Thu, Dec 24, 2020 at 3:38 PM Rainer Dorsch wrote: > > Hi, > > > > I tried to run the bullseye installer from > >

bullseye-installer fails on Cubox-i due to networking issue

from the cubox than copy and paste from minicom, that would also help. Many thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Bullseye installer, daily image broken for cubox-i

same issue with the lastest install images of buster :-/ The Fedora32 installer boots and the installer comes up. Any ideas what is going wrong? Hmm.just wondering now, is it required to install Debian via ttyUSBx or should the text based installer work on HDMI? Regards Rainer -- Ra

Re: u-boot vs installer images

Thanks, Vagrant for the quick response. Am Dienstag, 13. Oktober 2020, 00:34:36 CEST schrieb Vagrant Cascadian: > On 2020-10-12, Rainer Dorsch wrote: > > I just browsed through the bullseye installation guide. I saw there is a > > section on > > > > 3.6.2. Debian-provi

u-boot vs installer images

thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Lowest power Debian SBC

#Physical_and_electrical_comparison Is there a Debian based SBC which goes close to or even below 1W? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Network Bandwidth issue in VLAN-Router

ecisely this issue in Chicago. But the fact > > is > > that for me it was a result of rate-limiting at the IP provider ATT. It is > > not necessarily related directly, but senior citizens :-) may recall the > > differential up/down bandwidth on ISDN. > > At my last

Re: Serial console on buster images

power-cycling it manually, everything worked fine. I just did an install cycle to confirm the behavior. Thanks Rainer Am Sonntag, 28. Juli 2019, 20:45:23 CEST schrieb Rainer Dorsch: > Hi Wookey, > > many thanks for your quick and detailed response. > > Am Sonntag, 28. Juli 2019

Re: devregs for imx

Hi Paul, thanks for your detailed response. Am Montag, 29. Juli 2019, 01:02:44 CEST schrieb Paul Wise: > On Sun, Jul 28, 2019 at 6:16 PM Rainer Dorsch wrote: > > does anybody know if there is something equivalent to devregs in > > > > https://github.com/boundarydevices/

Re: Serial console on buster images

ou have any other idea, please let me know. Rainer -- Rainer Dorsch http://bokomoko.de/

Serial console on buster images

the bootargs? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

devregs for imx

Hi, does anybody know if there is something equivalent to devregs in https://github.com/boundarydevices/imx-utils to probe and manipulate the hardware registers in an imx6 for Debian. Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Network Bandwidth issue in VLAN-Router

eduction, but no dice. > > On Sat, Jul 27, 2019, 8:24 AM Rainer Dorsch wrote: > > Hi, > > > > I have a stretch box configured as VLAN router (Cubox -i2ex). There is a > > drastic difference between the bandwidth of the uplink (VLAN1) and the > > downlinks (VLA

Re: Todays update

I just reran it at full screen and left it for about 15 seconds, getting > a bit over 19 fps worst case! > > Thats huge improvement! > > To the coders that made that happen, thank you very much! > > Cheers, Gene Heskett -- Rainer Dorsch http://bokomoko.de/

Re: Using a custom device tree file

overwrote the old supplied dtb after making a copy of it). Introducing a new model name was probably not a good idea, since it breaks the upgrade, so I try to go back to the unmodified model name. Then after each kernel upgrade I need to go through the manual procedure of rebuilding a new modified dtb

Re: Using a custom device tree file

hen there's the support for u-boot emulating EFI so you could use > grub-efi-*, which has made great progress in recent u-boot versions. But > then we could use grub on more platforms ... that would be a nice goal > for buster, at least. > Many thanks for the detailed description, I bookmarked your post in the mailing list archive :-) Does it make sense to paste the big picture in a Debian wiki page (or multiple of them) and link the /usr/share/doc/... files? Thanks a lot again Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Using a custom device tree file

Hello, Am Sonntag, 11. Februar 2018, 22:24:51 CET schrieb Rainer Dorsch: > Am Sonntag, 11. Februar 2018, 13:20:07 CET schrieb Vagrant Cascadian: > > On 2018-02-11, Rainer Dorsch wrote: > > > I try to use a custom device tree file, but uEnv.txt does not have any > > > ef

Re: Using a custom device tree file

Am Sonntag, 11. Februar 2018, 13:20:07 CET schrieb Vagrant Cascadian: > On 2018-02-11, Rainer Dorsch wrote: > > I try to use a custom device tree file, but uEnv.txt does not have any > > effect: > > > > rd@mohot:~$ cat /boot/uEnv.txt > > fdtfile=imx6dl-hummingb

Using a custom device tree file

el SolidRun HummingBoard Dual/Quadrd@mohot:~$ Do I need to run flash-kernel or something else that uEnv.txt has any effect? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Plasma-mobile on cubox-i

Am Samstag, 30. Dezember 2017, 10:59:52 CET schrieb Paul Wise: > On Fri, Dec 29, 2017 at 8:59 PM, Rainer Dorsch wrote: > > This also runs out of memory (1G+1G swap) > > Maybe just bt the current thread instead of all of them. > > > I need to investigate this later, d

Re: Plasma-mobile on cubox-i

Hi Paul, thanks again for your answer. On Freitag, 29. Dezember 2017 06:45:49 CET Paul Wise wrote: > On Fri, Dec 29, 2017 at 5:06 AM, Rainer Dorsch wrote: > > Is there something I did wrong or could do more efficiently? Would running > > standalone and then loading the core

Re: Plasma-mobile on cubox-i

something I did wrong or could do more efficiently? Would running standalone and then loading the core be more memory efficient? If yes, how do I do run standalone with the dbgsym packages? Installing them seems not sufficient Thanks Rainer On Donnerstag, 28. Dezember 2017 07:36:27 CET Paul W

Plasma-mobile on cubox-i

have any idea what I might have done wrong? Are there any logs available (first time I am running wayland and not an xserver)? Kind regards and many thanks Rainer -- Rainer Dorsch http://bokomoko.de/ Jabber: rdor...@jabber.org

Re: flash-kernel and dtbs

Hi Vagrant, many thanks for you excellent suggestions, they helped me a lot. Am Dienstag, 28. November 2017, 13:12:42 schrieb Vagrant Cascadian: [...] > > When the user installs them. Install u-boot-imx and see > /usr/share/doc/u-boot-imx/README.Debian* for instructions on how to > install u-bo

Re: flash-kernel and dtbs

Am Sonntag, 26. November 2017, 16:25:59 schrieb Vagrant Cascadian: > On 2017-11-26, Rainer Dorsch wrote: > > On Sonntag, 26. November 2017 11:30:04 CET Vagrant Cascadian wrote: > >> On 2017-11-26, Rainer Dorsch wrote: > >> > I try to setup the correct dtb for

Re: flash-kernel and dtbs

Hi Vagrant, thanks for your quick reply. On Sonntag, 26. November 2017 11:30:04 CET Vagrant Cascadian wrote: > On 2017-11-26, Rainer Dorsch wrote: > > I try to setup the correct dtb for a HummingBoard DualLite using > > flash-kernel, > > but the kernel seems to load a

flash-kernel and dtbs

Quad Nov 26 15:32:15 mohot kernel: [0.00] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad Nov 26 15:40:09 mohot kernel: [0.00] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad rd@mohot:~$ Can anybody tell, what I am doing wrong? Is that a flash-kernel bug? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Hummingboard DTB (imx6)

@0200/ecspi@02014000"; Somebody claims that the Fedora kernel supports SPI flawless (with the proper dtb file). Any hint is welcome... Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Plasma mobile using Wayland on imx6

Might be of interest for some people here: Puri.sm is running Plasma mobile using Wayland on imx6 (ARM SoC) using Debian Testing: https://puri.sm/posts/running-plasma-mobile-on-an-imx6-test-board/ Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Kernel 4.13.4 does not show a virtual console on framebuffer on cubox-i

Hi, you can ignore my previous main, problem was simple, the system was on virtual terminal 7, I assume a display manager tried to start and failed. on VT1-6 the consoles are there Rainer On Samstag, 28. Oktober 2017 14:19:24 CEST Rainer Dorsch wrote: > Hi, > > I recompiled

Kernel 4.13.4 does not show a virtual console on framebuffer on cubox-i

://paste.debian.net/993101/ Any ideas are welcome. Thanks Rainer PS: I copied debian-kernel, please follow-up on the debian-arm list. -- Rainer Dorsch http://bokomoko.de/

Re: kodi with framebuffer on cubox-i

, if you are interested in the discussion. Thanks Rainer On Donnerstag, 5. Oktober 2017 08:09:44 CEST Jonas Smedegaard wrote: > Quoting Rainer Dorsch (2017-10-04 22:38:58) > > > On Mittwoch, 4. Oktober 2017 10:34:00 CEST Jonas Smedegaard wrote: > > [...] > > > >

Re: kodi with framebuffer on cubox-i

On Donnerstag, 5. Oktober 2017 12:32:21 CEST Paul Wise wrote: > On Thu, Oct 5, 2017 at 4:37 AM, Rainer Dorsch wrote: > > I checked versions now, I should be good, but the xserver still does not > > start (started with the Xserver now and look to kodi as a second step). > >

Re: kodi with framebuffer on cubox-i

y information which is useful for you which should be appended to the bugreport? Thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: kodi with framebuffer on cubox-i

Hi Paul, I checked versions now, I should be good, but the xserver still does not start (started with the Xserver now and look to kodi as a second step). On Mittwoch, 4. Oktober 2017 11:33:25 CEST Paul Wise wrote: > On Wed, Oct 4, 2017 at 1:33 AM, Rainer Dorsch wrote: > > I experime

Re: kodi with framebuffer on cubox-i

Hi Paul, many thanks for your response. On Mittwoch, 4. Oktober 2017 11:33:25 CEST Paul Wise wrote: > On Wed, Oct 4, 2017 at 1:33 AM, Rainer Dorsch wrote: > > I experimented with kodi on the cubox-i without proprietary extensions. > > Since the CuBox i* series of devices use V

kodi with framebuffer on cubox-i

Hello, I experimented with kodi on the cubox-i without proprietary extensions. So far no luck yet, but I think I have not yet hit the hard roadblocks... First I tried without an X-server directly on framebuffer. How would I tell kodi not to search for an X11 display? I get in the kodi crashlog

SBC with Two GE Interfaces

Hello, can anybody tell if there is an SBC with two Gigabit Ethernet interfaces which is supported by Debian? I want to use it as an Network Gateway, i.e. I have no strong requirements on other interfaces and it should be reasonably low power. Many thanks Rainer -- Rainer Dorsch http

Re: linux-image--armmp-unsigned

:-) Rainer -- Rainer Dorsch http://bokomoko.de/

linux-image--armmp-unsigned

incompatible with the Cubox-i (imx6)? Many thanks Rainer -- Rainer Dorsch http://bokomoko.de/

Re: Graphical output from iMX6/Cubox-i

Hi, here is an interesting reply I received off-list from Sean (I have not yet looked at it): Date: Mon, 05 Sep 2016 09:09:39 +0800 Subject: Re: xserver-xorg-video-armada From: Sean Cross To: Rainer Dorsch Hi Rainer, There are a few pieces missing, but I have all of them packaged. It

Re: Graphical output from iMX6/Cubox-i

iner On Sunday 21 August 2016 12:16:19 Rainer Dorsch wrote: > Hi, > > I installed stretch on my cubox-i4pro with the Debian installer (update from > jessie to stretch) and was happy that I got console output on the HDMI > interface on a standard Debian installation (and wireless afte

Graphical output from iMX6/Cubox-i

rd@kodi:~$ The I became brave and tried to install X, but here I did not have any luck: https://www.bokomoko.de/~rd/cubox-i/Xorg.0.log Has anybody any graphical output running on a plain Debian installation? If not, can anybody tell, what is the missing piece? Many thanks Rainer -- Rainer

Re: Installation Report: Stretch Alpha 7 on Cubox-i4pro

This is the corresponding bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=834974 Rainer -- Rainer Dorsch http://bokomoko.de/

Installation Report: Stretch Alpha 7 on Cubox-i4pro

armhf Packages 100 /var/lib/dpkg/status rd@kodi:~$ Kind regards Rainer -- Rainer Dorsch http://bokomoko.de/

Re: 4.5.0-0.bpo.2-armmp does not boot on cubox-i

Hi, I opened a bugreport against the kernel: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=826518 Does anybody else see, that his cubox-i is not booting with newer kernels anymore? Thanks Rainer On Saturday 04 June 2016 14:35:29 Rainer Dorsch wrote: > On Saturday 04 June 2016 13:27

Re: 4.5.0-0.bpo.2-armmp does not boot on cubox-i

On Saturday 04 June 2016 13:27:04 Karsten Merker wrote: > On Sat, Jun 04, 2016 at 01:02:16PM +0200, Rainer Dorsch wrote: > > On Saturday 04 June 2016 12:43:00 Rainer Dorsch wrote: > > > On Saturday 04 June 2016 11:46:28 K. Merker wrote: > > > > On Thu, Jun 02, 20

Re: 4.5.0-0.bpo.2-armmp does not boot on cubox-i

Hi again, On Saturday 04 June 2016 12:43:00 Rainer Dorsch wrote: > Hi Karsten, > > thanks for the detailed response, that is exactly, what I was looking for. > > On Saturday 04 June 2016 11:46:28 K. Merker wrote: > > On Thu, Jun 02, 2016 at 09:30:35PM +0200, Rainer Dorsch w

Re: 4.5.0-0.bpo.2-armmp does not boot on cubox-i

Hi Karsten, thanks for the detailed response, that is exactly, what I was looking for. On Saturday 04 June 2016 11:46:28 K. Merker wrote: > On Thu, Jun 02, 2016 at 09:30:35PM +0200, Rainer Dorsch wrote: > > after the upgrade to kernel 4.5.0-0.bpo.2-armmp, my cubox-i does not > &g

4.5.0-0.bpo.2-armmp does not boot on cubox-i

-pci: EHCI PCI platform driver [ 33.176239] ehci-orion: EHCI orion driver [ 33.199923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.215088] hidraw: raw HID events driver (C) Jiri Kosina [ 33.223084] usbcore: registered new interface driver usbhid [ 33.228730]

Re: Bug#797779: brcmfmac4330-sdio.txt from OpenElec fixes the issue

Hi Stefan, I copied the debian-arm list, because this should be an issue which is present on almost any ARM based SoC and there might exist solutions for other SoCs already. On Wednesday 02 September 2015 19:37:13 Stefan Lippers-Hollmann wrote: > Hi > > On 2015-09-02, Rainer Dor

Re: wifi support on imx6 soc

Hi again, On Friday 07 August 2015 21:08:22 Rainer Dorsch wrote: > Hi, > > does anybody know if the Debian kernel supports wifi on the imx6 soc? I have > a cubox- i. > > There are some indications in the Gentoo wiki > https://wiki.gentoo.org/wiki/Cubox-i#Wifi[1] > (but

wifi support on imx6 soc

-pcie.ap.bin bcm4330.hcdbrcmfmac43236b.bin brcmfmac4329-sdio.bin brcmfmac43340-sdio.bin brcmfmac4354-sdio.bin brcmfmac43602-pcie.bin cutv:/lib/firmware/brcm # Many thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ [1] https://wiki.gentoo.org/wiki/Cubox

Re: Cubox i4pro real time clock(s)

> > Can you give me a guess as to when this will be available in sid/unstable? Can anybody of you write a short summary on the topic in e.g. the Debian Wiki https://wiki.debian.org/ArmHardFloatPort/CuBox-i ? Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/

Re: IXP4xx (armel) support in d-i for Jessie

/sbin/modinfo zram Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/

Re: "Expanding" memory of an armel device?

at I could buy that would help me with the task of > "expanding" the memory of this NAS? > > > Thanks, -- Rainer Dorsch Lärchenstr. 6 D-72135 Dettenhausen 07157-734133 email: rdor...@web.de jabber: rdor...@jabber.org GPG Fingerprint: 5E6C 4AF9 363C 97A6 F820 C2E6 8CE0 5F33 07

Re: issues with experimental kernels on imx6 based boards.

sdhci_esdhc_imx11705 0 sdhci_pltfm 3522 1 sdhci_esdhc_imx scsi_mod 183198 1 libata sdhci 38217 2 sdhci_pltfm,sdhci_esdhc_imx at803x 3438 0

cross-compilation, native compilation, or chroot compilation for armhf

thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/8909377.R6DfppXiAo@blackbox

Re: armhf Installer Image

se note that as a new kernel version has migrated to testing > sometime this week, there might be a mismatch between the > daily-built hd-media tarball and the testing CD image which was > generated last monday. A new CD image will be built next monday, > which should solve this

Re: armhf Installer Image

Hi Karsten, many thanks for your detailed explanations. I added a few comments and questions. On Tuesday 11 November 2014 08:10:14 Karsten Merker wrote: > On Mon, Nov 10, 2014 at 11:52:54PM +0100, Rainer Dorsch wrote: > > I am wondering if there is a debian installer image for armhf

armhf Installer Image

thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/2548851.TrivlIFa9A@blackbox

u-boot for Cubox-i

Hi Vagrant, I read that you disabled cubox-i support for 2014.07 and it seems it is not yet back in 2014.10-rc2. Can you describe the issue with cubox-i? Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of

Re: looking for u-boot testers

th the Cubox-i2ultra (i2u-300-d), which did not work in the past. Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.

Re: Cubox-i-notes questions

Hi Robert, thanks for replying. On Tuesday 05 August 2014 17:30:16 Robert Schwebel wrote: > On Sun, Aug 03, 2014 at 02:22:10PM +0200, Rainer Dorsch wrote: > > > Debian jessie could likely go final around December and predictions > > > are the jessie kernel will be 3.16. My

Re: Cubox-i-notes questions

tches to get full hardware > support, I looked at the date of the patches and it seem unclear how to > keep the patches up to date with latest updates going happening in Debian > kernel land. I have not tried that either. Rainer > > Ian > > On 21 July 2014 21:07, Rainer Dorsch

Re: Cubox-i-notes questions

ute the update, even though it is not tested: http://bokomoko.de/~rd/Debian/cubox-i-notes-untested.txt Please let me know if you have any positive of negative feedback. Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/2166921.ljn35Ox0gO@blackbox

Re: Cubox i2ultra does not boot with Debian u-boot

esult, whereas both the jessie image from rabeeth and the geexbox image boot SPL. Rabeeh, we chatted on IRC before. I am wondering if there is anything which is different on the i2ultra hardware compared to the i4pro hardware with respect to u-boot? I am happy to do some more testing... Thanks,

Cubox i2ultra does not boot with Debian u-boot

cubox-support.diff supposed to be uptodate or are there things from solid-run missing? Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Notes on cubox-i installation

it is a separate page or merged with the existing page. Kind regards, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.

Cubox-i framebuffer support

: module is from the staging directory, the quality is unknown, you have been warned. [4.933072] imx-hdmi 12.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 [5.074863] imx-drm display-subsystem.10: bound 12.hdmi (ops imx_hdmi_driver_exit [imx_hdmi]) rd@bokocube:/var/log$ Than

Re: Changing IP addresses with dhclient

uperblock). The time will still be wrong, but at least the > machine won't have seem like it time-travelled backwards. > > If you can't find anything changing between the two requests, then it's > probably down to the router policy. > > Tim. > > On 2

Re: Changing IP addresses with dhclient

Hi Ian, On Saturday 28 June 2014 10:28:33 Ian Campbell wrote: > On Sat, 2014-06-28 at 10:23 +0200, Rainer Dorsch wrote: > > The real question is why does the dhclient on the cubox-i > > http://cubox-i.com/ get another IP address when it asks again? > > Is it possible that it

Bootargs for Debian u-boot

setenv bootargs 'root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttymxc0,115200' manually (and redo that after each flash-kernel) ? Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of &q

Re: Changing IP addresses with dhclient

Hi Jerry, On Friday 27 June 2014 20:16:04 Jerry Stuckle wrote: > On 6/27/2014 4:42 PM, Rainer Dorsch wrote: > > Hello, > > > > I see with my cubox-i running dhclient changing IP addresses, e.g. first > > the cubox-i receives 192.168.178.88 then it switches to 19

Changing IP addresses with dhclient

ybody else seeing that? The only non-standard behavior I see is the misssing RTC and the unrealistic date at the first dhclient request. Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe&quo

Re: flash-kernel and dtb

On Thursday 19 June 2014 16:01:48 Rainer Dorsch wrote: > The problem was caused by the existence of /uImage, I renamed that (and > /ramdisk) and the problem went away. BTW, I do not see anywhere a reference to /uImage in boot.scr. Does anybody understand why u-boot is checking for

Re: flash-kernel and dtb

bootscript from mmc ... ## Executing script at 1080 2857680 bytes read in 247 ms (11 MiB/s) 28603 bytes read in 126 ms (221.7 KiB/s) 11422771 bytes read in 646 ms (16.9 MiB/s) Booting Debian 3.15-rc8-armmp from mmc 0:2... Kernel image @ 0x1080 [ 0x00 - 0x2b9ad0 ] Thanks, Rainer -- Rainer Dorsc

Re: flash-kernel and dtb

On Sunday 15 June 2014 12:14:03 Vagrant Cascadian wrote: > Merging both replies into a single email here... > > On Sun, Jun 15, 2014 at 12:43:13PM +0200, Rainer Dorsch wrote: > > On Sunday 15 June 2014 00:23:07 Vagrant Cascadian wrote: > > > My hunch is loading your bo

Re: flash-kernel and dtb

Hi Vagrant, On Sunday 15 June 2014 00:23:07 Vagrant Cascadian wrote: > On Sun, Jun 15, 2014 at 08:36:33AM +0200, Rainer Dorsch wrote: > > On Saturday 14 June 2014 14:48:08 Vagrant Cascadian wrote: > > > On Sat, Jun 14, 2014 at 10:36:43PM +0200, Rainer Dorsch wrote: >

Re: flash-kernel and dtb

Hi Vagrant, On Sunday 15 June 2014 00:23:07 Vagrant Cascadian wrote: > On Sun, Jun 15, 2014 at 08:36:33AM +0200, Rainer Dorsch wrote: > > On Saturday 14 June 2014 14:48:08 Vagrant Cascadian wrote: > > > On Sat, Jun 14, 2014 at 10:36:43PM +0200, Rainer Dorsch wrote: >

Re: flash-kernel and dtb

On Sunday 15 June 2014 08:56:07 you wrote: > On 15/06/2014 08:48, Rainer Dorsch wrote: > > On Sunday 15 June 2014 08:43:23 you wrote: > >> On 15/06/2014 08:36, Rainer Dorsch wrote: > >>> Hi Ian, > >>> > >>> thanks for your useful response

Re: flash-kernel and dtb

On Sunday 15 June 2014 08:43:23 you wrote: > On 15/06/2014 08:36, Rainer Dorsch wrote: > > Hi Ian, > > > > thanks for your useful response again. > > > > On Saturday 14 June 2014 14:48:08 Vagrant Cascadian wrote: > >> On Sat, Jun 14, 2014 at 10:36:4

Re: flash-kernel and dtb

On Sunday 15 June 2014 08:46:30 Rainer Dorsch wrote: > Hi Vagrant, > > On Saturday 14 June 2014 15:37:03 Vagrant Cascadian wrote: > > On Sat, Jun 14, 2014 at 11:56:01PM +0200, Karsten Merker wrote: > > > On Sat, Jun 14, 2014 at 10:36:43PM +0200, Rainer Dorsch wrote: >

Re: flash-kernel and dtb

On Sunday 15 June 2014 06:35:50 drEagle wrote: > On 14/06/2014 22:36, Rainer Dorsch wrote: > > Hi Ian, > > > > On Saturday 14 June 2014 14:23:33 you wrote: > >> On Sat, 2014-06-14 at 14:42 +0200, Rainer Dorsch wrote: > >>> On Saturday 14 June 2014 13:

Re: flash-kernel and dtb

Hi Vagrant, On Saturday 14 June 2014 15:37:03 Vagrant Cascadian wrote: > On Sat, Jun 14, 2014 at 11:56:01PM +0200, Karsten Merker wrote: > > On Sat, Jun 14, 2014 at 10:36:43PM +0200, Rainer Dorsch wrote: > > It looks like you might not have set a console device, so > > poss

  1   2   >