Hello, I installed an SD card for a cubox-i2ultra following my installation notes and Vagrant's feedback:
https://lists.debian.org/debian-arm/2014/07/msg00026.html At the end, it turned out that Debian u-boot does not work for the cubox- i2ultra. The u-boot SPL is not started on the cubox-i2ultra (i.e. no outputs on the serial console, no red front light). The same SD card starts on the cubox-i4pro flawless the SPL. The cubox-i2ultra boots e.g. geexbox-devel-20140707-r9600c65.cuboxi.img without any issues. I checked on the cubox irc channel with rabeeh: [12:36] <rabeeh> _rd: i think the best way to achieve things here is - [12:36] <rabeeh> 1. clone - https://github.com/SolidRun/u-boot-imx6 [12:36] <rabeeh> 2. compare board/solidrun of our tree with the patched debian tree [12:36] <rabeeh> 3. create an additional patch [12:37] <rabeeh> notice that the master of https://github.com/SolidRun/u-boot-imx6 already supports ALL of CuBox-i and HummingBoard boards [12:38] <rabeeh> jnettlet mentioned to me that u-boot finally accepted i.mx6 SPL patchset; due to that the CuBox-i and HummingBoard patches can be upstreamed Is the debian u-boot http://sources.debian.net/src/u-boot/2014.07~rc4+dfsg1-1/debian/patches/cubox-support.diff supposed to be uptodate or are there things from solid-run missing? Thanks, Rainer -- Rainer Dorsch http://bokomoko.de/ -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/2785785.nczQkUSxtF@blackbox
