Hi Wookey, I understood the behavior now better: everything works as you described:
root@home-buster:~# cat /proc/consoles ttymxc0 -W- (EC p ) 207:16 root@home-buster:~# The issue I saw and misinterpreted was that the Cubox-i did not reboot after the installer finished. After power-cycling it manually, everything worked fine. I just did an install cycle to confirm the behavior. Thanks Rainer Am Sonntag, 28. Juli 2019, 20:45:23 CEST schrieb Rainer Dorsch: > Hi Wookey, > > many thanks for your quick and detailed response. > > Am Sonntag, 28. Juli 2019, 18:11:34 CEST schrieb Wookey: > > If your ttymxc0 is being found and enabled by the kernel, but not set up > > by > > the installer, then that's a bug and we should work out why not. > > It seems that this is the scenario. I could install over the serial console > w/ o any issues, but after the reboot, I do not see a serial console > anymore. > > Since I cannot access the running machine, I cannot read /proc > > I try to get openssh installed and then the device booted again. Maybe I get > network access. > > If you have any other idea, please let me know. > > Rainer -- Rainer Dorsch http://bokomoko.de/
