Take your eyeball out before doing anything noisy or smelly.
Rich
> On Dec 3, 2013, at 17:44, Jim Watts wrote:
>
> and another eyeball on a stalk. But I digress...
>
> Remember to take it out before you start the motor, it makes a really loud
> noise if you leave it in place.
___
on board
>
>
> --
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Jim
> Watts
> *Sent:* December 3, 2013 10:54 AM
> *To:* 1 CnC List
> *Subject:* Re: Stus-List Stiff throttle and belt recommendations for
> Yamar 2GM20 on cnc 30 mkII
>
>
>
&g
Watts
Sent: December 3, 2013 10:54 AM
To: 1 CnC List
Subject: Re: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
on cnc 30 mkII
I would not be without this belt tensioning tool. I'm thinking of buying a
couple more just in case the ones I have break. They are really ha
Message-
From: Aaron Rouhi
To: cnc-list
Sent: Tue, Dec 3, 2013 10:28 am
Subject: Re: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
on cnc 30 mkII
Pretty nifty!
Cheers,
Aaron R.
Admiral Maggie,
1979 C&C 30 MK1 #540
Annapolis, MD
Date: Tue, 3 Dec 2013 06:5
Pretty nifty!
Cheers,Aaron R.Admiral Maggie,1979 C&C 30 MK1 #540Annapolis, MD
Date: Tue, 3 Dec 2013 06:54:29 -0800
From: paradigmat...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
on cnc 30 mkII
I would not be without
done. sam :-) From: Aaron RouhiSent: Tuesday, December 3, 2013 7:07 AMTo: cnc-list@cnc-list.comReply To: cnc-list@cnc-list.comSubject: Re: Stus-List Stiff throttle and belt recommendations
C&C 30 MK1 #540
> Annapolis, MD
>
>
> --
> Date: Mon, 2 Dec 2013 22:03:28 -0800
> From: kevindrisc...@gmail.com
> To: cnc-list@cnc-list.com
> Subject: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
> on cnc 30 mkII
>
>
> Our new to us 30-2 st
m
Subject: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
on cnc 30 mkII
Our new to us 30-2 started sounding a bit hollow and throwing some stream out
of exist the other night so I opened the water pump Sunday and found this:
https://docs.google.com/file/d/0BwhcX19YaPJ8N3E0cm
Kevin, I replaced my throttle cable last year after it brokequite the job
on a 30-2. When replacing you will see how many curves it has hence the
stiffness. To do the replacement I had to:
- remove the compass
- remove the wheel brake
- slack the steering cables
- remove the steering chain...
1 - I've never found that I needed anything but a properly tightened yanmar
belt.
2 - Agree, a little emery cloth while each pully is running.
3 - I use a belt tensioner to hold the belts to the correct tension while
tightening the nuts.
4 - When my throttle got stiff I was unsuccessful at getti
A note: when you run the engine to clean the engine pulley, do so with the
belt OFF. It should only take a few seconds to clean up the pulley if you are
prepared and there won't be any over heating problem.
Rich
> On Dec 3, 2013, at 5:40, Rich Knowles wrote:
>
> Hi Kevin. You have got yours
Hi Kevin. You have got yourself a great boat. See comments below:
Rich Knowles
INDIGO 1981 LF38
Halifax NS
> On Dec 3, 2013, at 2:03, Kevin Driscoll wrote:
>
> Our new to us 30-2 started sounding a bit hollow and throwing some stream out
> of exist the other night so I opened the water pump S
Our new to us 30-2 started sounding a bit hollow and throwing some stream
out of exist the other night so I opened the water pump Sunday and found
this:
https://docs.google.com/file/d/0BwhcX19YaPJ8N3E0cmJrYWwyTlE/edit?usp=docslist_api
Only one of the fins appeared to be completely in tact
So my qu
13 matches
Mail list logo
