ze goes up to $95...
>
> Danny
>
>
> -- Original Message ------
> From: Martin DeYoung
> To: "cnc-list@cnc-list.com"
> Subject: Re: Stus-List Installing teak handrails
> Date: Fri, 3 May 2013 17:02:46 +
>
> If you have balsa cored decks
un...@cnc-list.com] On Behalf Of
djhaug...@juno.com
Sent: May 6, 2013 5:56 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Installing teak handrails
Okay,
so, any opinions on Bronze wood screws vs SS and if SS 304 or 316. It seems
the 316 is bit more brittle. 304 is less corrosion resistant but str
gt; 1970 C&C 43
> Seattle
>
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
> djhaug...@juno.com
> Sent: Friday, May 03, 2013 6:38 AM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Installing teak handrails
>
>
al Message --
From: Martin DeYoung
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Installing teak handrails
Date: Fri, 3 May 2013 17:02:46 +
If you have balsa cored decks the extra time to seal the bolt hole with epoxy
is a good investment.
Martin
Calypso
1970 C&C 43
nwich, RI, USA
On Sun, May 5, 2013 at 11:35 AM, Danny Haughey wrote:
> So, you have some sort of stud sticking out of the handrails?
>
>
> From my Android phone
>
>
> Original message
> From: Gary Russell
> Date:
> To: C&C List
> Subject
So, you have some sort of stud sticking out of the handrails?
From my Android phone
Original message
From: Gary Russell
Date:
To: C&C List
Subject: Re: Stus-List Installing teak handrails
Hi Danny,
You might want to install your handrails as I do. Mine
n Behalf Of Gary
Russell
Sent: May 5, 2013 9:47 AM
To: C&C List
Subject: Re: Stus-List Installing teak handrails
Hi Danny,
You might want to install your handrails as I do. Mine are
through-bolted in from the inside, and I use "O" rings to seal them to the
cabin top. I use a c
le. America’s First Nationwide 4G Network
>
> - Reply message -
> From: "mjg...@comcast.net"
> To:
> Subject: Stus-List Installing teak handrails
> Date: Sat, May 4, 2013 9:39 pm
>
>
>
> Danny,
> Aquidneck Fasteners in Fall River, MA right off RT 24 has an in
That's great information!
Thanks!
I'm also very fortunate that the ships store at our marina is very well stocked
as well
Danny
T-Mobile. America’s First Nationwide 4G Network
- Reply message -
From: "mjg...@comcast.net"
To:
Subject: Stus-List Installing teak
Danny,
Aquidneck Fasteners in Fall River, MA right off RT 24 has an incredible
selection of nuts and bolts.
Mark
Sent with Verizon Mobile Email
---Original Message---
From: cnc-list@cnc-list.com
Sent: 5/3/2013 4:20 pm
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Installing teak handrails
On Behalf Of
djhaug...@juno.com
Sent: May 3, 2013 10:38 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Installing teak handrails
Hello again,
As i'm getting closer to installing my new handrails, I have grown concern
regarding the bedding compound. My old handrails were lag screwed from the
b
traveler.
Danny
Lolita
1973 Viking 33
Westport Point, MA
-- Original Message --
From: Martin DeYoung
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List Installing teak handrails
Date: Fri, 3 May 2013 17:02:46 +
If you have balsa cored decks the extra time to sea
cnc-list@cnc-list.com
Subject: Stus-List Installing teak handrails
Hello again,
As i'm getting closer to installing my new handrails, I have grown concern
regarding the bedding compound. My old handrails were lag screwed from the
bottom. I like this approach as it makes installing finished
guard as that screw/bolt/stud is at a
different angle than all the others. I guess that may still have to be a lag
screw...
-- Original Message --
From: Andrew Burton
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Installing teak handrails
Date: Fri, 3 May 2013 10:55:32 -0400
.com
Sent: Friday, May 03, 2013 9:38 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Installing teak handrails
Hello again,
As i'm getting closer to installing my new handrails, I have grown concern
regarding the bedding compound. My old handrails were lag screwed from the
bottom. I lik
One thing I used on my other boat for installing deck hardware was barrel
bolts. You can back them with fender washers and they are a very elegant
solution. Far better than acorn nuts.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/a
I put brass inserts in the wood, so now I screw 10-24 oval heads into it,
much nicer than worrying about the wood stripping. Now I would probably
epoxy embed SS helicoils, as I have used these other places with good
results. I used 5200, as I notice most people step on these, usually when
the boat
riday, May 03, 2013 9:38 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Installing teak handrails
Hello again,
As i'm getting closer to installing my new handrails, I have grown concern
regarding the bedding compound. My old handrails were
lag screwed from the bottom. I like this ap
Hello again,
As i'm getting closer to installing my new handrails, I have grown concern
regarding the bedding compound. My old handrails were lag screwed from the
bottom. I like this approach as it makes installing finished handrails a much
less time consuming job. There would be no need for
19 matches
Mail list logo
