-list.com/pipermail/cnc-list_cnc-list.com/attachments/20130402/9f5458c6/attachment-0001.html>
--
Message: 2
Date: Tue, 2 Apr 2013 17:29:35 -0500
From: Marek Fluder
To: "cnc-list@cnc-list.com"
Subject: Re: Stus-List C&C 24 Keel Lift Point
Message-ID:
Co
ls MD
- Original Message -
From: Marek Fluder
To: cnc-list@cnc-list.com
Sent: Tuesday, April 02, 2013 6:29 PM
Subject: Re: Stus-List C&C 24 Keel Lift Point
I had a look at my bilge on Saturday:
https://www.dropbox.com/s/0djgghfk4odl20q/IMG_9375.JPG
The 3 aft bolts hav
I had a look at my bilge on Saturday:
https://www.dropbox.com/s/0djgghfk4odl20q/IMG_9375.JPG
The 3 aft bolts have nuts of 1&1/16" and the forward one is 3/4".
The point about cutting a hole in a coach roof is a valid one as all 4
bolts are under it.
Marek
C&C 24 "Emilie"
Hamilton, Ontario
On Su
Ed:
I had a Kirby 25 that had a single point lift arrangement similar to
what Colin described. The PO had a metal bar specifically constructed
that spanned two keels bolts.you would remove the 2 nuts, place the
steel bar down over the bolts, replace the nuts. The steel bar had "D
shaped
same principle.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>
> From: Colin Kilgour
>To: cnc-list@cnc-list.com
>Sent: Saturday, March 30, 2013 4:04 PM
>Subject: Re: Stus-List C&C 24 Keel Lift Point
>
>Re: hole in the deck:
>
Re: hole in the deck:
I'm not sure where the balance point is on a 24, but you might be able
to lift vertically with just the companionway open. That's how the
J24's and Sharks do it.
in any event, you don't need to shift a lot of gear around to move the
balance point.
Cheers
Colin
On 3/30/13
Of course then there's the new hole in the cabin top. :-)
I'll be at my 24 next weekend (apparently our new small home addition
is the priority is weekend), and I'll try to remember taking a photo of the
keel bolts.
Ed
On Mar 29, 2013, at 8:52 PM, Colin Kilgour wrote:
> My J24 (and all others)
My J24 (and all others) lift from a single point, but there's a bar
that spans 2 keel bolts and we put a shackle around that bar.
Presumably you could rig a similar arrangement on a C&C 24.
It's a lot simpler than using slings...
Cheers
Colin
On 3/26/13, ok wrote:
> Wondering if anyone has mod
Wondering if anyone has modified their C&C 24 to have a single lifting point
from the the keel bolts. The Ranger 23 next to me has had this modification
done. Would work much better with my club lift and trailer than straps.
Also, anyone have a pic of their C&C 24 bilge? Just want to see if
