Use a two line bridle with a single lift ring or shackle. You can shorten one
line or the other to move the balance. If you're lucky you'll be able to move
the lift ring forward or aft to get it where you want it. That's how I lift my
Lido. Actually, I use a 3 line bridle but same principle.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Colin Kilgour <charliekilo...@gmail.com>
>To: cnc-list@cnc-list.com
>Sent: Saturday, March 30, 2013 4:04 PM
>Subject: Re: Stus-List C&C 24 Keel Lift Point
>
>Re: hole in the deck:
>
>I'm not sure where the balance point is on a 24, but you might be able
>to lift vertically with just the companionway open. That's how the
>J24's and Sharks do it.
>
>in any event, you don't need to shift a lot of gear around to move the
>balance point.
>
>Cheers
>Colin
>
>
>On 3/30/13, Ed Dooley <edoo...@madriver.com> wrote:
>> Of course then there's the new hole in the cabin top. :-)
>> I'll be at my 24 next weekend (apparently our new small home addition
>> is the priority is weekend), and I'll try to remember taking a photo of the
>> keel bolts.
>> Ed
>>
>> On Mar 29, 2013, at 8:52 PM, Colin Kilgour <charliekilo...@gmail.com>
>> wrote:
>>
>>> My J24 (and all others) lift from a single point, but there's a bar
>>> that spans 2 keel bolts and we put a shackle around that bar.
>>> Presumably you could rig a similar arrangement on a C&C 24.
>>>
>>> It's a lot simpler than using slings...
>>>
>>> Cheers
>>> Colin
>>>
>>>
>>> On 3/26/13, ok <orrk...@gmail.com> wrote:
>>>> Wondering if anyone has modified their C&C 24 to have a single lifting
>>>> point
>>>> from the the keel bolts. The Ranger 23 next to me has had this
>>>> modification
>>>> done. Would work much better with my club lift and trailer than straps.
>>>>
>>>> Also, anyone have a pic of their C&C 24 bilge? Just want to see if my
>>>> bolts
>>>> are as they should be and original. For close to the same weight keel,
>>>> my
>>>> bolts seem oversized compared to the Ranger 23 next to me. I'm thinking
>>>> if
>>>> they are original they will be strong enough for a single lift point?
>>>>
>>>> Thanks!
>>>
>>> --
>>> Sent from my mobile device
>>>
>>>
>>
>> _______________________________________________
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>
>--
>Sent from my mobile device
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
