orth the pain.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson
Sent: December 21, 2012 10:10 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Bil
.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Ron -- unfortunately, the Simrad WP30 is no
longer
available. About your only wheel pilot choice any more is the
Raymarine
M
>
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List Auto Steering For 29 Mk 2
>
> ** **
>
> Ron -- unfortunately, the Simrad WP30 is no longer available. About your
> only wheel pilot choice any more is the Raymarine X5:
>
> ** **
r 20, 2012 5:53 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Ron -- unfortunately, the Simrad WP30 is no longer available. About your
only wheel pilot choice any more is the Raymarine X5:
http://www.defender.com/product.jsp?path=-1|344|2028687|2028710
&
> **Ron**
>
>
>
>
> --
>
> *From:* CnC-List
> [mailto:cnc-list-boun...@cnc-list.com]
> *On Behalf Of *Joel Aronson
> *Sent:* Thursday, December 20, 2012 5:52 PM
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stu
9:52 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
On the 4000+, there are rollers on either side of the motor gear. One of
them is adjusted by loosening the screw on the back of the wheel unit, then
turning the knob until you get the correct tension.
I read that
, 2012 8:58 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Jack,
I replaced my belt last year because it was slipping. I didn't see any
adjustment on the clutch. The old belt was obviously damaged in spots.
Best $20 I ever spent... (ok, maybe not, but I'
mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jack
Brennan
Sent: Thursday, December 20, 2012 8:53 PM
To: w...@wbryant.com; cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Another common problem with Raymarine autopilots, I've just discovered, is
that the belt slips bec
--- From: Wally Bryant
> Sent: Thursday, December 20, 2012 8:34 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Auto Steering For 29 Mk 2
>
> I wonder sometimes if the reason Raymarine wheel pilots have a bad rep
> is because folks don't know how to balance the boat.
>
>
30
Former C&C 25
Fort Lauderdale, Fl.
-Original Message-
From: Wally Bryant
Sent: Thursday, December 20, 2012 8:34 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
I wonder sometimes if the reason Raymarine wheel pilots have a bad rep
is because folks
I wonder sometimes if the reason Raymarine wheel pilots have a bad rep
is because folks don't know how to balance the boat.
That said, I have to admit that I have an entire new Simrad WP32 buried
in the bottom of the V-Berth, right next to the sewing machine. I ran
right out and bought it whe
nna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron's
Hardwood
Sent: December 20, 2012 6:33 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Auto Steering For 29 Mk 2
I am looking for advice on getting a wheel
Sent: Thursday, December 20, 2012 5:54 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Auto Steering For 29 Mk 2
Martin.
Thanks for your response.
I would use the autopilot mostly for long distance races and the occasional
short or single handed race. With an autopilot I would consider enter
ehalf Of Ron's
Hardwood
Sent: Thursday, December 20, 2012 2:54 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Auto Steering For 29 Mk 2
Martin.
Thanks for your response.
I would use the autopilot mostly for long distance races and the occasional
short or single handed race. With an autopil
012 5:52 PM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List Auto Steering For 29 Mk 2
Just put a Ray X5 wheel pilot on my 35/3. I'd be happy to discuss
installation.
Joel Aronson
202-213-7551
On Dec 20, 2012, at 5:32 PM, Ron's Hardwood
wrote:
I am looking for advice on
PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Just put a Ray X5 wheel pilot on my 35/3. I'd be happy to discuss
installation.
Joel Aronson
202-213-7551
On Dec 20, 2012, at 5:32 PM, Ron's Hardwood
wrote:
I am looking for advice on getting a
Ron,
Your choices are few. The Raymarine wheel pilot is your best bet. It's a 3-5
hour install.
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
On Dec 20, 2012, at 4:32 PM, "Ron's Hardwood"
wrote:
>
>
> I am looking for advice on getting a wheel automatic steering system
:* Re: Stus-List Auto Steering For 29 Mk 2
Just put a Ray X5 wheel pilot on my 35/3. I'd be happy to discuss
installation.
Joel Aronson
202-213-7551
On Dec 20, 2012, at 5:32 PM, Ron's Hardwood
wrote:
I am looking for advice on getting a wheel automatic steering system
(Auto-helm)
Joel. What was the approximate cost for the materials and labour time or
cost?
Ron
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson
Sent: Thursday, December 20, 2012 5:52 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29
nc-list.com] On Behalf Of Martin
DeYoung
Sent: Thursday, December 20, 2012 5:41 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Auto Steering For 29 Mk 2
Ron,
Are you thinking above deck or below deck and/or what is your budget?
Will you be asking the autopilot to drive while racing
Ron -- unfortunately, the Simrad WP30 is no longer available. About your only
wheel pilot choice any more is the Raymarine X5:
http://www.defender.com/product.jsp?path=-1|344|2028687|2028710&id=1825866
Below-deck pilot is probably overkill (and also probably WAY out of budget) for
a 29.
Fred
Just put a Ray X5 wheel pilot on my 35/3. I'd be happy to discuss
installation.
Joel Aronson
202-213-7551
On Dec 20, 2012, at 5:32 PM, Ron's Hardwood
wrote:
I am looking for advice on getting a wheel automatic steering system
(Auto-helm) for my 1986 C&C 29 Mk 2.
We do some long distance
ture I would like is a remote control.
Martin
Calypso
1970 C&C 43
Seattle
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron's
Hardwood
Sent: Thursday, December 20, 2012 2:33 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Auto Steerin
I am looking for advice on getting a wheel automatic steering system
(Auto-helm) for my 1986 C&C 29 Mk 2.
We do some long distance races (Lo 300 & Susan Hood) as well as some
cruising.
Any experience that you have, positive or negative would be very helpful and
appreciated.
Than
24 matches
Mail list logo
