t.com'
Subject: RE: Stus-List speedometer - C&C 35 Mk2
Absolutely Inconceivable!!
I have an old transducer here that I cut out of my boat, with 4 Paddles, and 2
magnets.
Bill Coleman
Erie PA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of General Gao
via
-list.com
Cc: General Gao
Subject: Re: Stus-List speedometer - C&C 35 Mk2
I verified the paddle before launch, I only have one magnet and it is there. No
abnormalities found there.
Bo
On Mon, Aug 10, 2020 at 9:51 AM Bill Coleman via CnC-List
wrote:
Heh heh!
No doubt where
egularly
> used lines from that movie!
>
>
>
> Bill
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Russ
> & Melody via CnC-List
> *Sent:* Friday, August 07, 2020 10:53 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Russ &a
Russ & Melody
Subject: Re: Stus-List speedometer - C&C 35 Mk2
Hi Bill,
You bring me a smile with this.
It's inconceivable! I love the movie. The missus & I watch it at least once
every year.
https://www.youtube.com/watch?v=qhXjcZdk5QQ
Cheers, Russ
At 06:43 AM 8/5/2020,
g, unless you are
missing an entire leg of one of the four paddles, as they are molded
right inside the plastic.
Did you pull it out and check it with a magnet?
Bill Coleman
Erie PA
Cc: Russ & Melody
Subject: Re: Stus-List speedometer - C&C 35 Mk2
What is the number o' magnets
wheel with anhydrous lanolin screw up the readings?
David F. Risch
401-419-4650
From: CnC-List On Behalf Of Bill
Coleman via CnC-List
Sent: Tuesday, August 4, 2020 10:21 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List speedometer - C&C 35 Mk2
Two.
Bill Coleman
On Tue, Aug
August 04, 2020 8:26 PM
*To:* cnc-list@cnc-list.com
*Cc:* Russ & Melody
*Subject:* Re: Stus-List speedometer - C&C 35 Mk2
What is the number o' magnets supposed you be on the paddle-wheel? If
it is more than one then one is missing,
Cheers, Russ
At 09:57 AM 8/4/2020, yo
Behalf Of Russ &
Melody via CnC-List
Sent: Tuesday, August 04, 2020 8:26 PM
To: cnc-list@cnc-list.com
Cc: Russ & Melody
Subject: Re: Stus-List speedometer - C&C 35 Mk2
What is the number o' magnets supposed you be on the paddle-wheel? If it is
more than one then one is missing
Would coating the paddlewheel with anhydrous lanolin screw up the readings?
David F. Risch
401-419-4650
From: CnC-List On Behalf Of Bill Coleman via
CnC-List
Sent: Tuesday, August 4, 2020 10:21 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List speedometer - C&C 35 Mk2
-list@cnc-list.com> wrote:
>
> Put some dielectric grease on the connections ;)
>
> Â
>
> Joe Della Barba Coquina C&C 35Â MK I
>
> www.dellabarba.com
>
> Â
>
> Â
>
> Â
>
> From: CnC-List [ mailto:cnc-list-boun...@cnc-list.com
> ] On Behalf Of Ge
a CnC-List
Sent: Monday, May 18, 2020 3:41 PM
To: <mailto:cnc-list@cnc-list.com>cnc-list@cnc-list.com
Cc: General Gao <<mailto:general.z....@gmail.com>general.z....@gmail.com>
Subject: [EXTERNAL] Re: Stus-List speedometer - C&C 35 Mk2
Â
Reporting back. followed the guide and
verif
oun...@cnc-list.com>] *On Behalf Of
*General Gao via CnC-List
*Sent:* Monday, May 18, 2020 3:41 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* General Gao mailto:general.z@gmail.com>>
*Subject:* [EXTERNAL
>> *General
>> Gao via CnC-List
>> *Sent:* Monday, May 18, 2020 3:41 PM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* General Gao
>> *Subject:* [EXTERNAL] Re: Stus-List speedometer - C&C 35 Mk2
>>
>>
>>
>> Reporting back. followed the guid
oun...@cnc-list.com>] *On Behalf Of *General Gao
via CnC-List
*Sent:* Monday, May 18, 2020 3:41 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* General Gao mailto:general.z@gmail.com>>
*Subject:* [EXTERNAL] Re: Stus-List speedometer - C&
opies of the original message and any attachments.
From: CnC-List On Behalf Of General Gao via
CnC-List
Sent: Saturday, May 23, 2020 12:55 PM
To: cnc-list@cnc-list.com
Cc: General Gao
Subject: Re: Stus-List speedometer - C&C 35 Mk2
that is what I am thinking. Would vaseline work?
T
> *www.dellabarba.com <http://www.dellabarba.com>*
>
>
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *General
> Gao via CnC-List
> *Sent:* Monday, May 18, 2020 3:41 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* General Gao
> *S
RNAL] Re: Stus-List speedometer - C&C 35 Mk2
Reporting back. followed the guide and verified the transmitter had resistance
of 1787ohms, verified there was VAC output when the paddle was turning fast
(couldn't get to the 5knots as boat is on land). Decided to sand the
connectors, an
Reporting back. followed the guide and verified the transmitter had
resistance of 1787ohms, verified there was VAC output when the paddle was
turning fast (couldn't get to the 5knots as boat is on land). Decided to
sand the connectors, and put it back, tested again, and it worked...the
connectors l
thank you everyone. I really appreciate the information. I will go check
and report back.
Stay safe!
Bo
On Mon, May 18, 2020 at 8:32 AM Ken Heaton via CnC-List <
cnc-list@cnc-list.com> wrote:
> Yup, that's correct. If there are only two wires coming from
> the paddlewheel transducer, it is like
Yup, that's correct. If there are only two wires coming from
the paddlewheel transducer, it is likely this 'generator' type as a more
modern hall effect transducer will have at least three wires (I think).
Of course a broke wire or bad connection anywhere between the transducer
and the instrument
So if I understand it correctly, the theory of operation for these
generator style knot meters would simply be a 2 wire system and a voltage
developed between the two? I would expect that a simple initial test would
be for continuity between the two wires with the wheel stopped. Then spin
the whe
There are (were) some generator knotmeters. Coquina came with one when
we bought her. If memory serves, it topped out at 10 or 12 knots and it
was always fun to peg it :)
Joe
Coquina
On 5/18/2020 5:32 AM, Ken Heaton via CnC-List wrote:
Have you looked at this web page? This takes yo to the m
gt;> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *John
>> and Maryann Read via CnC-List
>> *Sent:* Monday, April 13, 2020 7:49 AM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* John and Maryann Read
>> *Subject:* [EXTERNAL] Re: Stus-List spe
Barba Coquina C&C 35 MK I*
>
> *www.dellabarba.com <http://www.dellabarba.com>*
>
>
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *John
> and Maryann Read via CnC-List
> *Sent:* Monday, April 13, 2020 7:49 AM
> *To:* cnc-list
>>
>> *www.dellabarba.com <http://www.dellabarba.com>*
>>
>>
>>
>>
>>
>>
>>
>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *John
>> and Maryann Read via CnC-List
>> *Sent:* Monday, April 13, 2020 7:
7:49 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* John and Maryann Read
> *Subject:* [EXTERNAL] Re: Stus-List speedometer - C&C 35 Mk2
>
>
>
> Have had similar issues with my prior unit – Standard Horizon model 150
> which went out of production some 15 years ago and parts ar
list@cnc-list.com
Cc: John and Maryann Read
Subject: [EXTERNAL] Re: Stus-List speedometer - C&C 35 Mk2
Have had similar issues with my prior unit – Standard Horizon model 150 which
went out of production some 15 years ago and parts are hard to come by and only
on flea bay.
What brand and model
Have had similar issues with my prior unit – Standard Horizon model 150 which
went out of production some 15 years ago and parts are hard to come by and only
on flea bay.
What brand and model is your speedometer?
No – no tubes per se. Yours is all electric. The paddle wheel has a small
magne
28 matches
Mail list logo
