Joe
I don't see a Volvo sail drive on this boat. The photos indicate a shaft
and strut.
Best regards,
Jack Fitzgerald
S/V HONEY - US12788 (1974 C&C 39TM)
Savannah, GA USA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be le
Amen Dennis
HONEY - US12788 is vivid red.
Best regards,
Jack Fitzgerald S/V HONEY - US12788
C&C 39TM - 1974
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended recipient, you a
Thank you Bill.
Best regards,
Jack Fitzgerald
S/V HONEY - US12788
C&C 39 TM (1974)
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended recipient, you are hereby notified
that an
I am 70. Honey is 46. She has been with us since 1976.
Best regards,
Jack Fitzgerald
S/V HONEY - US12788
C&C 39 TM (1974)
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended rec
Edd
I leave Honey's HVAC in the HU mode year round unless we are on the boat.
Best regards,
Jack Fitzgerald
S/V HONEY - US12788 (1974 C&C 39TM)
Savannah, GA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileg
Likely a failing cutlass bearing. I had the same type of thumping noise
when running the engine. Increases and decreases with the throttle input.
Best regards,
Jack Fitzgerald
S/V HONEY - US12788
C&C 39TM (1974)
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec.
According to Robert Perry, the C&C 39 is the prettiest fiberglass sail
boat built. I have owned my 1974 39TM since 1976 and really have no
complaints. Sure there are issues with the fact that boat is getting old
but I have maintained & updated her to the point that she is actually a
better boat now
I replaced the Navtec rod heads on Honey's rigging twice in the first 35
years of owning her, finally had enough due to price & the PITA factor of
having to ship the rigging back to Navtec and wait for it's return. So I
had UK Sailmakers in Charleston, SC replace all of her standing rigging
with Na
All
same here in Savannah. The Savannah Yacht Club has closed the Club House
restaurant, bars & pool. However, the tennis courts & docks remain open,
but the board of stewards has instated the no non-member / guests allowed
on the property. One of the other sailing clubs is hosting their annual St
Edd
Our local sailing club will hold their 41st annual St. Patrick's Regatta on
21/22 March 2020. So far, they have not cancelled. The thought is that
since the competitors will be on the water with little to no (hopefully)
contact between crews or boats during the regatta we should be OK. I doubt
Tom
You said: *Alera has a blockage somewhere in the raw water system. I
checked the intake and the pump. Both seem fine But, there seems to be no
flow at the strainer.*
You likely have sucked up some trash or possibly a small fish and this
blocking the raw water intake line between the intake
Here you go:
Jack & Beth Fitzgerald - HONEY - C&C 39TM - 1974 - US12788 -
honeysail...@gmail.com - Savannah Yacht Club - Savannah, GA USA
Best regards,
Jack Fitzgerald
HONEY - US12788
Savannah
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is conf
Dennis
FYI
Interestingly, HONEY is a 1974 model (the last 39 built) and has the HIN on
the transom's starboard quarter as well as on a metal plate in the forward
end of the cockpit. Strangely, the do not completely match. The plate does
not include the moth or year of the build, the transom (real H
Edd,,
It is simple. Unless you install a cut off valve in the teed line off the
raw water entail, the engine's raw water pump will suck the water out of
the HVAC water line. When that happens you will have air in the intake line
and your engine will over heat, etc. all sorts of bad things will the
Ditto here. I rigged the same type of rod/turnbuckle to Honey's mast, added
the SpareTite and have never looked back. As long as you follow the
instructions the next mast removal is simple and straightforward
Best regards,
Jack Fitzgerald
HONEY - US12788
Savannah, GA USA
This email is protected b
Call Aaron at Signet in Redondo beach CA for a new part and or a repair
order.
Best regards,
Jack Fitzgerald
HONEY - C&C 39TM
US12788
Savannah, GA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you
Hey Bill
We do indeed own pretty boats
Jack Fitzgerald
HONEY
US12788
C&C 39TM
Savannah GA
> On Aug 5, 2019, at 08:24, Bill via CnC-List wrote:
>
> Haha, that's funny. ! That may have been one of the most graceful designs
> they made. I always heard that, but being on it, was never able to se
Babs,
Shrink wrap it correctly with proper ventilation and the mast un-stepped
and stowed. disconnent the batteries unless you have a way to keep them
maintained Then make sure that there is absolutely no way for rain water
to ingress into the boat. I have seen far too many stored boats literally
Bailey
I have Signet instruments on my C&C39TM. I call Aaron at Signet Marine and
he will be happy to assist you.
Email: serv...@signetmarine.com
(310) 320-4349
Best regards,
Jack Fitzgerald
Fitzgerald Forwarding Co. Inc. FMC license no:1966F
260 Oatland Island Road, Savannah, GA 31410 USA
Tel. n
Use the wick and save your toe rail
Jack Fitzgerald
Savannah GA USA
+912.441.2296
Sent from my iPad
> On Apr 13, 2019, at 9:45 PM, Shawn Wright via CnC-List
> wrote:
>
> Wow, that is interesting about the saw cut on the deck. I will have to
> inspect the photo I took; it sure looked amateuri
All
I had Forespar build a line drive carbon fiber whisker pole (all carbon
fiber, no aluminum extension) for our C&C 39TM 5 years ago. I spent the
time to discuss at length the build with Forespar tech at their facility in
CA since I wanted the pole to work not only as an expandable whisker pole
All,
I used Spartite way back when it first entered the market. I have no issues
whatsoever when removing the mast for maintenance. The wood mast wedges
went the way of the Dodo bird years ago.
Simply read and then follow the instructions exactly.
Best regards,
Jack Fitzgerald
C&C 39TM
HONEY -
Thank you Don..
Best regards,
Jack Fitzgerald
260 Oatland Island Road, Savannah, GA 31410 USA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended recipient, you are hereby notif
Congrats Alan,
I hope that you get in another 50+ years on the water.
Best regards,
Jack Fitzgerald
On Thu, Sep 27, 2018 at 9:45 AM ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have owned Thirsty for eighteen years. This is my third boat; first
> C&C. I have been sailing for f
had another *Oceanis*, 30mkI
> hull #677 (1981); I was probably the fourth owner, and had her for ten
> years.
>
> — Fred
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
>
> On Sep 27, 2018, at 7:50 AM, Jack Fitzgerald via CnC-List <
also the second owner of a 1984
> C&C 32...have had AZURA since 200612 years now and plan to keep her for
> many more.
>
> Rob Abbott
> AZURA
> C&C 32 - 84
> Halifax, N.S.
>
> On 2018-09-27 9:50 AM, Jack Fitzgerald via CnC-List wrote:
>
> Hello Al,
>
Hello Al,
I have a question for the list.
How many of you have owned your current C&C yacht for 5 years or longer.
FYI - we have owned Honey since October 1976 and are currently the second
owners.
Best regards,
Jack Fitzgerald,
HONEY - US12788
1974 C&C 39 TM
Savannah, GA 31410 USA
This email
Guys,
The Frying Pan Light is a decommissioned US Coast Guard facility and is now
a B&B and a very expensive B&B at that! Check it out on youtube at Frying
Pan Shoal B&B
Best regards,
Jack Fitzgerald
HONEY (C&C 39TM)
US12788
Savannah, GA
This email is protected by the Electronic Communications P
All
Pop Yachts sold a C&C 35 that was in Savannah to Dennis C's buddy Kevin a
couple of of month ago. The former owner has no complaints beyond having
said that he gave the boat away.
I knew the boat and truly felt that Kevin over paid at the time, but it did
sell quickly.
Best regards,
Jack Fit
Hey Bill
This is indeed sad news.
Bob Perry stated that the C&C 39 was one of the prettiest fiberglass sail
boats ever built. I agree.
Best regards,
Jack Fitzgerald
HONEY - C&C 39 TM (1974)
US12788
Savannah, GA 31410 USA
This email is protected by the Electronic Communications Privacy
Act, 18
I agree with Bill,
Then plumb bob measurement for Honey's mast is 11" aft of the mast at the
goose neck
Best regards,
Jack Fitzgerald
HONEY - C&C 39 TM
US12788
Savannah, GA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be
All.
I installed a smart plug on Honey and adapted all of my spare power cords
and adapters to the smart plug configuration. This was money well spent, no
more burnt shore plugs. I only wish that I had made this conversion a
couple of years ago.
I purchased mine from Defender since they had the b
Bill
I agree that the keel and mast are a nice touch but the rudder is definitely an
original from 1973
Jack Fitzgerald
HONEY
C&C 39 TM
Savannah
912 441.2296
Savannah GA
> On Jun 15, 2018, at 17:41, Bill Coleman via CnC-List
> wrote:
>
> I believe he had that keel custom made.
> Probably made
Dennis,
Honey has 2 of these same pumps. We dismantle and check them every year in
January. These pumps and tested with fresh water only and we still find the
corrosion issue mentioned below. They are coated and returned to the galley
and cockpit combing. Even with this program I have had to repla
Good luck
Best regards,
Jack Fitzgerald
HONEY
US12788
C&C 39 TM in Savannah, GA USA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended recipient, you are hereby notified
that
Hey Bill
We use 5/5 to 3/4 inch line on Honey based on the sail used and wind
conditions. The only 3/8" line on Honey are the light air spinnaker sheets.
Best regards,
Jack Fitzgerald
HONEY
US12788
Savannah, GA
C&C 39 TM
This email is protected by the Electronic Communications Privacy
Act, 18 U.
Hey Kevin,
My pleasure. Let me know when you are back in Savannah & I will buy you
lunch at The Yacht Club. Take care & again, congratulations
Best regards,
Jack Fitzgerald
HONEY
US12788 - Savannah, GA
C&C 39TM
Email*: j...@fitzgeraldforwarding.com
This email is protected by the Electronic Co
I agree Joe.
Savannah's creeks & old marinas are full of derelict sail boats. We used to
have a vibrant large boat sailing community here and now we are down a few
"rode hard, put up wet J Boats" and mixed bag of PHRF Boats whose owners
would rather complain about their ratings rather clean and pa
Joe
Understand completely. We have owned Honey since Dec of 1975 and as much as
I hate spending the bucks to keep her in yacht condition I just can't wrap
my mind around selling her nor can allow her to just wither away at the
dock like so many other old sail boats around here.
Best regards,
Jack
All
We have our 1974 C&C 39 TM & our 1974 Boston Whaler Outrage 21 insured with
SafeCo for the last 18 years. The Deductible on our 39 is 2% with 10% for a
named storm event. The Whaler's deductible is $500.00 with $1,000.00 for a
name storm event. Both boats are insured under a USD 3,000,000.00 P
: Stus-List 2018 Mid-Atlantic C&C Rendezvous UPDATE Oct 26,
> 27, 28
>
>
>
> http://academybedandbreakfast.com/
>
> http://www.flaghouseinn.com/
>
> https://www.chezamis.com/
>
>
>
>
>
> Joe
>
> Coquina
>
>
>
> *From:* CnC-List [mailto:cnc-lis
All
My wife & I will attend and will by car, too far North to sail our old boat
in the late fall.
Kindly recommend a couple of decent B&B's in the nearby area so that I can
go ahead and make the reservations.
Thank you
Best regards,
Jack and Beth Fitzgerald
HONEY (C&C 39TM)
US12788
Savannah, GA
Stu
Just placed an order for the manual for my C&C 39. However, there is not a
paypal link on the order form. Advise how to proceed.
Best regards,
Jack Fitzgerald
C&C 39 TM
HONEY
US12788
Savannah,GA USA
260 Oatland Island Road, Savannah, GA 31410 USA
Tel. no: 912 898.1069 - Fax no: 912 898.9458
Same here, Bill
I had UK build a gold tape drive main with the most roach that the boat's
rig can stand.The local PHRF committee nicked me 6 secs, but this sail more
than made up for the lost time. We have a Tides Marine strong track on the
mast so in light light air we just drop the main about a
Honey has one as well.
Best regards,
Jack Fitzgerald
HONEY
C&C 39 TM - US12788
Savannah, GA 31410 USA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not the intended recipient, you are here
l message --------
> From: Jack Fitzgerald via CnC-List
> Date: 12/29/17 9:22 AM (GMT-05:00)
> To: C&CList
> Cc: Jack Fitzgerald
> Subject: Re: Stus-List CNG tank refill location
>
> There isn't a CNG filling station in Savnanah
>
> Best regards,
> Jack Fitzger
There isn't a CNG filling station in Savnanah
Best regards,
Jack Fitzgerald
HONEY - US12788
C&C 39TM
Savannah, GA USA
On Thu, Dec 28, 2017 at 10:58 PM, detroit...@aol.com via CnC-List <
cnc-list@cnc-list.com> wrote:
>
> This is aimed at the locations on the east coast south of Annapolis.
>
> Loo
All
I went through all of these 3GM30 engine issues for the last 3 years.
Finally came to my senses and in October I replaced the old tired 3GM30F
with a new 3YM30AGE. The difference is extraordinary & I only wish that I
had replaced the 3GM30 3 years ago.
Best regards,
Jack Fitzgerald
HONEY - US
Joe,
I have 2 of these "home" units installed on Honey. I replace them (the
entire unit not just the batteries) every year when the time changes from
ESDT to EST. I see these same units installed on some very high dollar (new
& used) yachts that we export worldwide. If these are good enough for a
It is a 39 Tall Mast. We own hull no. 69 in the C&C 39 series
Best regards,
Jack Fitzgerald
HONEY - US12788
C&C 39 TM (1974)
Savannah, GA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged. If you are not
The H is for July. The boat was built in July of 1984 as a 1985 model.
We are now shipping new yachts and small boats from the USA with the last 3
digits as 718. Built in 2017 as 2018 model year boats.
Best regards,
Jack Fitzgerald
HONEY - C&C 39TM
US12788
This email is protected by the Electron
Don,
Just went through all of this same BS with a Yanmar 3GM30F that we
installed in 1986. After 8,793 hours it was simply worn out and not worth
the costs to rebuild an old motor. So, I bought a new Yanmar 3YM30AGE and
we will install it next week. Hopefully the new Yanmar will give me (or the
ne
Bruce
I haul Honey in late Mark of each year and the shaft zinc remains about
80/85%
Best regards,
Jack Fitzgerald
HONEY - US12788
C&C 39TM
Savannah, GA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.
from my Verizon, Samsung Galaxy smartphone
>
>
> Original message
> From: Jack Fitzgerald via CnC-List
> Date: 9/17/17 11:55 AM (GMT-05:00)
> To: C&CList
> Cc: Jack Fitzgerald
> Subject: Re: Stus-List Yanmar 3GMD replacement on C&C 34
>
>
iPhone
>
> On Sep 17, 2017, at 12:12 PM, George Cone via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> What is the cost if I can ask for just the motor
> Thanks
> George cone
> c&c 40
> Unsinkable 2
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
ine was "shot"?
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
>
> On Sep 17, 2017 12:47 PM, "Jack Fitzgerald via CnC-List" <
> cnc-list@cnc-list.com> wrote:
>
>> Geo. I
>>
>> We bought the new engine, new 2
cnc-list@cnc-list.com> wrote:
> What is the cost if I can ask for just the motor
> Thanks
> George cone
> c&c 40
> Unsinkable 2
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
> ---- Original message
> From: Jack Fitzgerald via
Same here, just bought the new Yanmar 3YM30AE for our 39TM to replace 30+
year old 3GM30F hopefull to begin installation early next week. Our
mechanic indicates that this engine will be basically a plug and play. This
is have to see.
If the new engine is a trouble free as the old one I will be a h
Mike is correct.
I spent a large number of boat bucks having a proper teak cockpit grate
built for Honey our 39TM . The 3 piece grate looked fantastic and fit
perfectly (for what it cost it should have) but after 2 years of having to
remove it clean the cockpit sole, watching chafe the paint and co
Howard
Kindly send me your photos and details. We received a very good offer on
our C&C 39 TM (owned since 1976) today and are looking to downsize. The 35
II maybe a good choice for us.
Thank you
Best regards,
Jack Fitzgerald
Savannah, GA 31410 USA
Tel. no: 912 898.1069 - Fax no: 912 898.9458 -
We have found the prices at Defender marine to be a hellava lot cheaper
than West marine PRO.
Best regards,
Jack Fitzgerald
C&C 39TM - HONEY - US12788
Savannah, GA 31410 USA
This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be
Same here, received the actual USCG renewal today along the third "scam"
renewal letter.
These folks must be making a killing..
Best regards,
Jack Fitzgerald
HONEY
US12788
Savannah, GA
On Mon, Jun 5, 2017 at 1:17 PM, Dave Godwin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Indeed. Filling o
affiliated with the sale of this boat or with Sunnybrook.
> However when you hear of a boat dying it is often uplifting to look at one
> of the finest examples of the same vessel. It is also heartening after
> seeing a beautiful boat neglected to see the same model that has been given
&
ted with the sale of this boat or with Sunnybrook.
> However when you hear of a boat dying it is often uplifting to look at one
> of the finest examples of the same vessel. It is also heartening after
> seeing a beautiful boat neglected to see the same model that has been given
> the atte
We have owned our 39-TM since 1975. I pains me to see someone let a C&C,
especially a 39 become a derelict. I doubt that there are any usable parts
left to use beyond the salvage price of the lead in the keel. What a
shame!!!
Best regards,
Jack & Beth Fitzgerald
S/V HONEY
US12788
On Tue, May 23
Good luck
Jack Fitzgerald
C&C 39 TM
HONEY
US12788
On Fri, Sep 2, 2016 at 9:22 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Fair winds my friend!
>
> Joel
>
> On Thu, Sep 1, 2016 at 7:28 PM, Adam Trackracer via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Thought you guys m
Yes, I used Alpenglow led lights in my 39TM
Best regards
Jack Fitzgerald
HONEY
US12788
C&C 39TM
Savannah, GA USA
> On Aug 28, 2016, at 18:15, Jerome Tauber via CnC-List
> wrote:
>
> Has anyone replaced the old square plastic C&C cabin dome lights with LED?
> Any suggestions for easy repla
I have a Milwaukee right angle 24vdc drill with a winch chuck. Works well
enough to lift a 200 Lbs person from the deck to the masthead on my 39TM
twice before having to change the battery. However, you must use a 2 speed
in low gear to make it work correctly
It doesn't work so hot when used to tr
Randy Borges
r...@waterlinesystems.com
and
Pilar Jensen
pjen...@uswatercraft.com
Best regards,
Jack Fitzgerald
HONEY
US12788
C&C 39TM
On Tue, Aug 9, 2016 at 9:07 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Do we have a contact email at US Watercraft?
>
> --
> Joel
> 301 541 8
Bill
Do you know where I can find the round black plastic holes used to
activatye the spring loaded latch on the cabin doors. We are adding
cabinets in the place of the old pipe berths in our 1974 39TM and I need 2
of these access holes to complete the project.
I bought several from C&C many ears
Bill,
Take a look at the Alpenglow LED lights. I replaced all of the old thin
light with these and although pricy, the work very well and look great
Best regards,
Jack Fitzgerald
HONEY
C&C 39 TM
On Fri, Jun 10, 2016 at 10:45 AM, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> OMG,
Josh,
I have the carbon fiber Forespar line control whisker pole for my C&C 39TM.
We had it overbuilt by Forespar so that we can use it a spinnaker pole for
the asymmetrical spinnakers as well as the symmetrical spinnakers. The
thing works perfectly, but is heavy as heck and you must keep it cover
Just make sure that you use the green LED bulbs behind the green lens and
the same for the red.
I found out the hard way that using white LED bulbs behind the colored lens
reduced the visibility dramatically and had to purchase the matching LED
bulbs in order for the forward running lights to work
I wouldn't paint it
On Tue, Mar 1, 2016 at 9:37 PM, Ryan Doyle via CnC-List <
cnc-list@cnc-list.com> wrote:
> Forgot to say - I sail New York City to NJ. Boat will spend the summer in
> salt water and will be hauled in the fall.
>
> On Tue, Mar 1, 2016 at 9:19 PM, Ryan Doyle wrote:
>
>> Hey all
All,
I am extremely happy with the sails built for my C&C 39 TM by UK Sailmakers
in Charleston, SC.
UK has built (2012) 1 suit of Gold tape drive race sails & 2 suits (1997 &
2015) of Silver Tape drive cruising sails for me in the past 10 years or so.
These sails are not cheap, but are designed
Hello Ron,
We do the same thing here in Savannah. We have Class A for the spin boats
and Class B for JAM. Your PHRF rating applies to your boat regardless of
the class entered. Saves a lot of RC grief, but the usual "I lost because
my rating sucks" still applies.
Best regards,
Jack Fitzgerald
HON
I suspect "wholesale"
Jack Fitzgerald
HONEY
C&C 39TM
Savannah, GA
On Tue, Feb 23, 2016 at 12:25 PM, Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> I'm confused. What is a "marina perspective"?
>
> Dennis C.
>
> On Tue, Feb 23, 2016 at 11:12 AM, Curtis via CnC-List <
> cnc-list@cnc-lis
Jack; I don't know that...I heard about him on this list...
>
> Richard
> 1985 C&C 37 CB; Mile 596
>
> Richard N. Bush
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -----Original Message-
> From: Jack Fi
Richard,
How do find this guy's link on Craig's list?
Thanks
Best regards,
Jack Fitzgerald
C&C 39TM
HONEY
Savannah, GA
On Mon, Feb 8, 2016 at 3:07 PM, Richard N. Bush via CnC-List <
cnc-list@cnc-list.com> wrote:
> Martin; his info:
> Mr. Dan Grandon
> 6460 4th Avenue,
> Alexandria,
Regardless of the surveyor that you choose, you may want to read and fully
understand his disclaimers in his contract before you use him or her.
Jack Fitzgerald
HONEY - C&C 39 TM
US12788
Savannah, GA
On Wed, Feb 3, 2016 at 11:38 AM, Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
;
> Joel
> 35/3
> The Office
> Annapolis
>
> On Thu, Jan 28, 2016 at 3:10 PM, Jack Fitzgerald via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Honey has a 20 year old Hall Quikvang D-30 that has performed flawlessly
>> since new.
>>
>> Jack Fi
Honey has a 20 year old Hall Quikvang D-30 that has performed flawlessly
since new.
Jack Fitzgerald
HONEY
US12788
Savannah, GA USA
On Thu, Jan 28, 2016 at 3:00 PM, Marek Dziedzic via CnC-List <
cnc-list@cnc-list.com> wrote:
> I wonder if anyone at Garhauer monitors this list. It almost sounds
I have shipped 6 of these C&C 30 OD boats to Japan this year with more
expected to ship in 2016. We have shipped a number of them to Europe as
well. This is one hot boat and has taken off internationally.
Best regards,
Jack Fitzgerald, export manager
Fitzgerald Forwarding Co. Inc. FMC license no:1
Hello Stu
Kindly remove my email address: j...@fitzgeraldforwarding.com from the
list. This is my business account and the listers are overwhelming me
during business hours.
Please keep me subscribed to the list at: fitzforward...@yahoo.com as I
enjoy the list and currently receive it on both
Thought so, thanks.
Jack Fitzgerald
C&C 39 TM
HONEY
Savannah, GA
On Wed, Sep 9, 2015 at 1:59 PM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Asia.
>
> On Wed, Sep 9, 2015 at 1:57 PM, Jack Fitzgerald via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
Are these bags (as well as their sails) made in the USA or in Asia? I had
UK/Charleston make 3 of these (same design) for Honey. They work well but
take up a great deal of space.
Jack Fitzgerald
C&C 39 TM
HONEY
Savannah, GA
On Wed, Sep 9, 2015 at 1:46 PM, Joel Aronson via CnC-List <
cnc-list@cn
I just went through this survey process. We agreed (my broker, the buyer's
broker & the potential buyer) that he would pay for the haul out and launch
and I would pay for the pressure wash if one was required. The survey was
perfect, the bottom was clean (this I already knew) and the potential buye
it appears to have the same state registration number as the yacht salvage
boat.
Best regards,
Jack Fitzgerald
HONEY
C&C 39TM
On Thu, Aug 20, 2015 at 8:12 PM, Steve Sharkey via CnC-List <
cnc-list@cnc-list.com> wrote:
> He does provide his phone number and urges people to come inspect the boat.
Defender has these solar powered vents on sale this week.
Jack Fitzgerald
HONEY
USA12788
C&C 39 TM
Best regards,
Jack Fitzgerald, export manager
Fitzgerald Forwarding Co. Inc. FMC license no:1966F
260 Oatland Island Road, Savannah, GA 31410 USA
Tel. no: 912 898.1069 - Fax no: 912 898.9458 - 24/7
Yep another tax from Uncle Sam, I paid mine 2 weeks ago and received the
new document in today's mail. At least the turn around is fast.
Jack Fitzgerald
C&C 39 TM
HONEY
Savannah, GA USA
On Thu, Jul 9, 2015 at 3:34 PM, Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Don't recall anybo
Babs,
Go see Tripp Fellabom at UK Sails/Charleston. he can surely assist for less
money than a boom conversion..
Best regards,
Jack Fitzgerald
On Tue, Jul 7, 2015 at 9:32 AM, Barbara Hickson Fellers via CnC-List <
cnc-list@cnc-list.com> wrote:
> Besides RigRite, does anyone know where I could s
Barbara
I did the basically the same boom modification that Bill mentions to Honey
back in 1998/99. The mast person can adjust the mainsail out haul by hand
without using the reefing winch.
Stop by the boat (berthed at SYC) next time you are in Savannah and take a
look. the original out haul arr
The Tides Marine strong track was about the best money that I have spent
Honey's upgrades since 1975.
Jack Fitzgerald
HONEY
US12788
C&C 39 TM
**PLEASE REMOVE honeys...@aol.com FROM YOUR ADDRESS
BOOK AND IMMEDIATELY ADD j...@fitzgeraldforwarding.com
*
On Tue, Jun 23, 2015 at 12:26 PM, Petar Ho
This maybe considered a charter by your insurance company. I would make
sure that you have liability cover and that your underwriters approve of
renting your boat.
Jack Fitzgerald
HONEY
US12788
C&C 39TM
On Thu, May 28, 2015 at 12:01 AM, PME via CnC-List
wrote:
> Heard of AirBnB yet? Here is a
The coated (rust showing in numerous places) lifelines on the boat in this
video are unsafe to say the least.
Jack Fitzgerald
C&C 39TM
HONEY
Savannah
On Mon, May 11, 2015 at 4:36 PM, Charlie Normand via CnC-List <
cnc-list@cnc-list.com> wrote:
> PFDs ?
>
> Horrible tragedy
>
> On Monday, May 11
Gary
I had UK Sails in Charleston replace every piece of the rod with Dyform 6
wire and never looked back. I have owned my 39 since 1975 and the Navtec
rod has been a PITA as well as expensive to properly maintain.
I haven't noticed any difference in the way that my boat sails except that
she is
Yikes and good luck. I think that I would replace damaged parts rather than
repair or try to straighten the bent rod..
Jack Fitzgerald
C&C 39TM
HONEY
US12788
Savannah, GA
On Sun, May 10, 2015 at 10:46 AM, Gary Zuehlke via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello all,
>
> A couple of day
I have a Forespar carbon fiber extendable spinnaker/whisker pole on Honey
It weighs twice what the aluminum pole weighs and when said and done with end
fittings etc it cost me right at USD4,000 through Port Supply
Jack Fitzgerald
Honey
C&C 39TM
Savannah GA USA
Sent from my iPhone
> On Apr 25, 20
The government bureaucrats in Savannah want to see the boat's registration
upon entry so there is no joy when entering a non registered boat into the
USA here.
Jack Fitzgerald,
HONEY
C&C 39 TM
US12788
On Wed, Mar 4, 2015 at 9:58 AM, Colin Kilgour via CnC-List <
cnc-list@cnc-list.com> wrote:
> Fa
The fresh water tanks on my C&C 39 TM (# 69) are built into the hull with
aluminum tops. Maybe your outlet and/or outlet hose connection is leaking?
Best regards,
Jack Fitzgerald
HONEY
US12788
Savannah, GA USA
On Tue, Mar 3, 2015 at 3:05 PM, Gary Zuehlke via CnC-List <
cnc-list@cnc-list.com> wro
1 - 100 of 145 matches
Mail list logo
