Transfer the stuff to more solid containers!
On Monday, February 23, 2015 9:11 PM, Russ & Melody via CnC-List
wrote:
Hi Ron,
Are you talking about the original event or spill containment?:)
Good question really, there was only one bottle but...
Cheers,Russ
Sweet
Use croakies!
On Sunday, December 21, 2014 1:22 AM, Ed Dooley via CnC-List
wrote:
Re: Dribble (losing glasses)Misplacing your glasses and dropping them
overboard are 2 very different things. :-)
Ed
From: Marek Dziedzic
Date: Sat, 20 Dec 2014 14:20:28 -0500
To: 'Ed Dooley' ,
Sub
Are you using a hot enough plug and premium fuel?
On Wednesday, August 13, 2014 11:33:11 AM, Danny Haughey via CnC-List
wrote:
- Forwarded Message -
Alright, the saga continues.
We went for a sea trial Sunday after the changes, i.e. Vent line cleared,
filters changed, clamps tig
How is methyl hydrate different?
On Tuesday, August 12, 2014 11:04:41 AM, Marek Dziedzic via CnC-List
wrote:
My experience is that 95.6% is the most what you can obtain commercially
(or from any kind of distillation). You can get further only with molecular
sieves or by removing the remai
One person with a lever can do it. Changing belts every year or two is best
policy.
On Tuesday, August 5, 2014 3:33:13 PM, Barbara Hickson Fellers via CnC-List
wrote:
So if my belt is slipping, can I just pull the alternator out to tighten? Or do
I have to replace it? It has squealed fr
- This mail is in HTML. Some elements may be ommited in plain text. -
I hope you get this on time, I made a trip to Kiev, Ukraine and had my bag
stolen from me with my passport and personal effects therein. The embassy has
just issued me a temporary passport but I have to pay for a ticket and s
Anyone have a used one for sale? C&C 27 Mk III. ___
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo
I had problems with gmail so I switched back to yahoo. Would prefer to stay
there.
From: Bill Bina via CnC-List
To: cnc-list@cnc-list.com
Sent: Friday, May 16, 2014 11:22:29 AM
Subject: Re: Stus-List Why via? - yahoo breaks email lists
I think it would be r
You can also use a bit of cotton rope as a siphon, removing it while under way
of course. Almost like a baggywrinkle.
From: via CnC-List
To: cnc-list@cnc-list.com
Sent: Tuesday, May 13, 2014 2:52:12 PM
Subject: Stus-List Standing water on deck
Hi all,
I ju
Enough, already. It was a screw up.
On Tuesday, May 6, 2014 2:30:29 PM, Stu via CnC-List
wrote:
The political email was sent to the list by error and the sender has
apologized.
No more emails are necessary.
Stu
___
This List is provided by the C
Stu, I'm good now. Thanks for all you do for us.
From: Stu via CnC-List
To: C&C Email List
Sent: Thursday, May 1, 2014 3:53:03 PM
Subject: Stus-List List Problems
Yesterday, approximately 125 members received notices saying their
subscriptions had been can
I got a similar one yesterday. Re-signed and changed my password.
From: Frank via CnC-List
To: List Stus
Sent: Thursday, May 1, 2014 9:57:36 AM
Subject: Stus-List Your membership in the mailing list CnC-List has been
disabled
I got this today, is it real?
I don't have any problem accessing or posting on the list with Yahoo, but my
Yahoo goes through google first. For how long, I can only guess as I'm still on
XP.
From: Marek Dziedzic
To: w...@wbryant.com; cnc-list@cnc-list.com
Sent: Friday, April 11, 2014 3:04
Jig-a-Loo is similar to McLube and less than half the price.
From: Paul Fountain
To: cnc-list@cnc-list.com
Sent: Tuesday, March 25, 2014 2:17:29 PM
Subject: Re: Stus-List 1986 33MKII
Terry,
I have a C&C 33-II 1985, and there is no plastic track on my mast wh
Tip. Replace the impeller fasteners with screws which take a hex key. Much
easier to work with.
From: dwight
To: cnc-list@cnc-list.com
Sent: Sunday, March 23, 2014 12:21:29 PM
Subject: Re: Stus-List Impeller/gear puller
David
Hardest part is getting the cov
Not in the Garhauer set up. I find under load adjustment requires a bit of crew
assistance, though. Maybe I'll try heavier shock cord.
From: Tom B
To: "cnc-list@cnc-list.com"
Sent: Tuesday, January 21, 2014 1:14:18 PM
Subject: Stus-List Adjustable genoa car
Adjustable cars seem like a grea
My recipe is hot consomme laced with sherry and lemon. Fantastic recuperative
drink when cold.
From: Steve Thomas
To: cnc-list@cnc-list.com
Sent: Wednesday, January 8, 2014 2:00:41 PM
Subject: Re: Stus-List friggin COLD
I make a Thermos of hot tea when single handing in cold weather.
It is
Check on Garhauer. Great stuff at reasonable prices. I have a rigid vang from
them and also the moveable genoa cars. Went Harken for my traveller, though.
C&C 27-III Firefly.
From: Ron Casciato
To: cnc-list@cnc-list.com
Sent: Thursday, January 2, 2014 3:22:03 PM
Subject: Re: Stus-List Scoutin
I got some from Princess Auto. Direct fit. Reasonable.
From: Alex Giannelia
To: "cnc-list@cnc-list.com"
Sent: Monday, December 16, 2013 12:27:10 PM
Subject: Stus-List LED BULBS IN GENERAL
I am now moving into replacing my incandescent bulbs all around with LED's so
is there an economical se
I have an interesting binocular story. In the eighties the Russians were very
short of foreign curremcy (remember the Lada?). Honest Ed's,a discount store in
Toronto managed to pick up surplus Russian Navy binoculars which they sold
cheaply, $29.00 id I remember correctly. I got a set of 10X50 o
Firefly (27 Mk III) did much better this year going to a new North 145%. Better
point, better boat speed than with the older #1.
From: "Hoyt, Mike"
To: cnc-list@cnc-list.com
Sent: Tuesday, December 3, 2013 8:44:08 AM
Subject: Re: Stus-List Old Sails Suck
Dwight
We won our class in Chester
Not aware of any Canadian source. Ask a friend visiting USA to pick you up a
few bottles. It cannot be mailed. Maybe magic, but if the Atomic Master Moyer
says - I do!___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List
Ty alternate applications of hear and cold, using a prop puller.
From: Bill Connon
To: cnc-list@cnc-list.com
Sent: Monday, November 11, 2013 2:01:04 PM
Subject: Re: Stus-List further questions about replacing the bellows on a PYI
shaft seal
Eric Frank wrote:
> Thanks to the list's advice las
Jig-a-Loo is the same stuff at less than half the price.
From: Jim Watts
To: 1 CnC List
Sent: Saturday, November 9, 2013 2:22:12 PM
Subject: Re: Stus-List floorboards
McLube works well, too. I have a spot where a bulkhead rubs against the liner,
one shot once a year and the squeaking stops
Firefly (27-III) was plagued with a rudder leak. I used to drill & fill each
season. Then I decided to tap the holes (one higher up, one on the bottom edge)
- two holes means faster drainage. In the spring I insert the hex-head plugs
and go sailing.
From: Ken Heaton
To: cnc-list
Sent: Wed
You might try Fx sails. They are in North Carolina. Very pleased with the main
I bought from them. John Irvin FIREFLY BYC
From: Marek Dziedzic
To: cnc-list@cnc-list.com
Sent: Tuesday, September 3, 2013 10:25:49 AM
Subject: Stus-List New (replacement) sails
Another strong vote for Garhauer.
From: Peter Fell
To: cnc-list@cnc-list.com
Sent: Saturday, July 20, 2013 9:43:52 PM
Subject: Re: Stus-List Fw: Boom Vang for C&C 27 Mk III
Well, at this junction, the vang attachment will be a ‘cheap and cheerful’
solution ..
Firefly has 6 (2pairs of 3) on the cabintop. C&C 27 Mk III. They are starting
to slip occasionally and I wonderwhat advice listers can provide. Change the
springs? Change the jaws? Suggestions pppreciated. John Irvin BYC Ottawa___
This List is provide
So sorry to hear this. Good luck rebuilding.
From: Stu
To: C&C Email List
Sent: Tuesday, April 2, 2013 11:59:19 AM
Subject: Stus-List Photo Album Update
Updating the Photo Album is going to be pretty slow for a while due to an
unfortunate incident.
Glady
MAKE A GOOD TEMPLATE AND THEN HAVE YOUR LOCAL PLASTICS OUTFIT REPLICATE THEM. I
TYPICALLY PAY ABOUT $75 FOR THE SIDE WINDOWS ON MY 27-III (sorry for the caps)
From: Joel Aronson
To: "cnc-list@cnc-list.com"
Sent: Thursday, March 21, 2013 1:11:12 PM
Subject: Re:
I use dinghy snatch blocks running through a block attached to the middle
stanchion, then to a spilock snap. Works well on my 27-III
From: Sam Salter
To: "cnc-list@cnc-list.com"
Sent: Sunday, March 3, 2013 1:07:53 PM
Subject: Stus-List Barber Haulers
Anybody
Sailors would appreciate the security provided by Avast! - download for free.
From: Rick Brass
To: 'henry evans' ; cnc-list@cnc-list.com
Sent: Friday, February 22, 2013 11:50:23 AM
Subject: Re: Stus-List Fw: henry evans
Hey, Hank. No problems.
Seldom does a
I put the garhauer adjustables on Firefly (27-III) with excellent results.
From: Chuck S
To: cnc-list@cnc-list.com
Sent: Sunday, January 20, 2013 12:45:42 PM
Subject: Re: Stus-List jib tracks
Hi Pete,
Our boat has the inner tracks, but we haven't taken the t
I am a great believer in butyl tape, double sided, which you can purchase from
an auto parts supplier as windshield installing tape.
From: Joel Aronson
To: "secondwind...@comcast.net" ;
"cnc-list@cnc-list.com"
Sent: Thursday, October 11, 2012 11:36:07 PM
Subject: Re: Stus-List Replacing Wind
No oil filter on mine!
From: Glen Eddie
To: "'cnc-list@cnc-list.com'"
Sent: Thursday, October 11, 2012 11:52:28 AM
Subject: Stus-List Atomic 4 Info
Hello everyone,
I just want to confirm that I am not crazy. Is there an oil filter on the
Atomic 4 (other than the drip pan at the bottom of c
Similar issue on the Ottawa River (Lac Deschenes).
From: Paul Fountain
To: "cnc-list@cnc-list.com"
Sent: Wednesday, October 3, 2012 4:28:17 PM
Subject: Re: Stus-List Great Lakes Water Levels
Rich,
It's a serious issue on the Great Lakes right now - many clubs and marinas on
Lake Ontario ar
I replaced my vents with white plumbing elbows. Not elegant but effective.
From: Don Wagner
To: Pierre Tremblay ; cnc-list@cnc-list.com
Sent: Friday, September 28, 2012 10:04:13 AM
Subject: Re: Stus-List Engine compartment ventilation
Pierre
All the C&Cs that I have seen do have some form o
Get on Scuttlebutt
From: Martin DeYoung
To: "cnc-list@cnc-list.com"
Sent: Friday, August 17, 2012 7:57:40 PM
Subject: Re: Stus-List Sailing Website (racing and cruising)
Edd,
The web site Pressure-Drop.us has a decent mix of sailing news, features and
forums without the wild west style en
Ditto on the MMO. I have to go to the US to get it every couple of years.
From: dwight veinot
To: cnc-list@cnc-list.com
Sent: Wednesday, August 15, 2012 5:34:14 PM
Subject: Re: Stus-List A4 Engine alignment
The A4 likes Marvel Mystery Oil, I don't know why because it is a
mystery...anyway if
If you wear a sandal make sure it's one with a toe cap!
From: Chuck S
To: cnc-list@cnc-list.com
Sent: Thursday, August 9, 2012 9:02:02 PM
Subject: Re: Stus-List Sailing gloves, now sandals
Dwight,
You are probably OK, but had to chastise my son for wearing sandals on the
boat. He lost one w
40 matches
Mail list logo
