Re: Stus-List LED masthead lights and steaming/deck light

Following the link isn't exactly intuitive, but the boat show tent and land locations are shown and then you have to go to the boat show map to see where they are. http://www.annapolisboatshows.com/united-states-sailboat-show/plan-your-visit/show-layout/ Josh On Aug 9, 2016 11:39 PM, "Josh Muckl

Re: Stus-List LED masthead lights and steaming/deck light

Cruising Solutions is the exhibitor that sells marine beam products. You can compare prices on their website. Follow the link below for their 2016 boat show info and website. http://www.usboat.com/boat_show.cgi?exhibitor_id=443&boat_show_type=usss Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons

Re: Stus-List fiberglass sheet

Oh I thought beauty was in the eye of the beer holder. Josh On Aug 9, 2016 9:52 PM, "Persuasion37 via CnC-List" wrote: > Absolutely! Beauty is in the eye of the beholder😜 > > Mike > PERSUASION > C&C 37 K/CB > Long Sault > > On Aug 9, 2016, at 7:16 PM, Dennis C. via CnC-List > wrote: > > Y

Re: Stus-List fiberglass sheet

Absolutely! Beauty is in the eye of the beholder😜 Mike PERSUASION C&C 37 K/CB Long Sault > On Aug 9, 2016, at 7:16 PM, Dennis C. via CnC-List > wrote: > > Yeah, but tell me you didn't put the pebbled side out, did you? :) > > Dennis C. > >> On Tue, Aug 9, 2016 at 5:33 PM, Persuasion37 via

Re: Stus-List LED masthead lights and steaming/deck light

Orca green (OGM). Pricey but really, really nice. Have used them on the last two boats. John > On Aug 9, 2016, at 9:27 PM, Jake Brodersen via CnC-List > wrote: > > Joel, > > I went with Marine Beam for my tricolor and anchor lights. Easy to swap out > and pretty bright. > > Jake > >

Re: Stus-List Help me pick next boat - now 33'

Hear you Josh. The Tartan boats are nice - just don’t have the level of woodwork of the original. John > On Aug 9, 2016, at 8:29 PM, Josh Muckley via CnC-List > wrote: > > Did you say 121? I don't NEED a 121 but I also don't need a new wife... > Doesn't mean I don't like to look. > > Josh

Re: Stus-List Filling stripped screw holes in fiberglass + core

Might have to play with it but the slightly pliable nature is why I suggested the g/flex. Normal epoxy can be brittle especially if its not going to be drilled and tapped. I would be fearful that a wood or sheet metal screw would crack the repair out of the hole. Josh Muckley S/V Sea Hawk 1989 C

Re: Stus-List Filling stripped screw holes in fiberglass + core

Joel, I’m not sure how well GFlex will hold screws. It seems to be just a little bit soft, even after it hardens. I use regular West System with a bit of silica filler to thicken it up. Jake From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-Lis

Re: Stus-List LED masthead lights and steaming/deck light

Joel, I went with Marine Beam for my tricolor and anchor lights. Easy to swap out and pretty bright. Jake From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Tuesday, August 9, 2016 09:22 To: cnc-list@cnc-list.com Cc: Joel Aronson Subje

Re: Stus-List C&C 33 Main Sail Sheave

Jessica, Depending on the sheave/axle configuration, it can be done. I replaced several sheaves on my boat with the mast up. My mast has a large metal cap on top, which holds the axles in place. It took four screws to remove it. Lifting the axles out wasn’t difficult, just a little nerve

Re: Stus-List Help me pick next boat - now 33'

Did you say 121? I don't NEED a 121 but I also don't need a new wife... Doesn't mean I don't like to look. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Aug 9, 2016 7:50 PM, "John Pennie via CnC-List" wrote: > Ok, forget what I said. The 33’ is just too damned pretty. Let me know >

Re: Stus-List Help me pick next boat - now 33'

Ok, forget what I said. The 33’ is just too damned pretty. Let me know if anyone knows of a centerboard version somewhere near the east coast. I see the one in Buffalo. Also, if anyone is interested in a 121… John > > - Original Message - > From: "John Pennie via CnC-List"

Re: Stus-List Filling stripped screw holes in fiberglass +

Fill them with the 5 minute g/flex. Josh On Aug 9, 2016 6:51 PM, "Joel Aronson via CnC-List" wrote: > Machine screws are out. Prior owner already put in larger screws which > look like crap. Down to option "c" fill the holes. > > Oh well. > > Joel > > On Tuesday, August 9, 2016, Dave via CnC-

Stus-List Borrow a Shaw?

Anyone have a shaw account I can borrow while I'm in BC? PM me if you do. My international T Mobile sucks. Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660___ This list is supported by the generous donations of our me

Re: Stus-List fiberglass sheet

Yeah, but tell me you didn't put the pebbled side out, did you? :) Dennis C. On Tue, Aug 9, 2016 at 5:33 PM, Persuasion37 via CnC-List < cnc-list@cnc-list.com> wrote: > Dennis > > I just had to answer your just gotta answer. LOL > > I used Home Depot FRP sheets to replace the original headline

Re: Stus-List Filling stripped screw holes in fiberglass +

Machine screws are out. Prior owner already put in larger screws which look like crap. Down to option "c" fill the holes. Oh well. Joel On Tuesday, August 9, 2016, Dave via CnC-List wrote: > Agreed with Fred, first choice machine screws, second larger, and third > and fourth - bodywork clips

Re: Stus-List fiberglass sheet

Dennis I just had to answer your just gotta answer. LOL I used Home Depot FRP sheets to replace the original headliner panels that were made of vinyl covered plywood. They were in deplorable shape from water damage. After re-bedding everything and painting the headliner with Interlux Blue G

Re: Stus-List fiberglass sheet

Joe, McMaster-Carr. I order materials from both Jamestown Distributers and M/Carr and one thing is for certain, the order from Mc-Master Carr will be at your door the next day… Given the quality of the material and the time savings it isn’t worth it for me to even consider laying up sheet FRP.

Re: Stus-List Filling stripped screw holes in fiberglass +

Agreed with Fred, first choice machine screws, second larger, and third and fourth - bodywork clips or heavily glass-filled epoxy. I did a bunch of the latter this season and found that drilling the (new) holes then 'tapping' with a modified wood screw worked well.By modified I mean grinding

Re: Stus-List Filling stripped screw holes in fiberglass + core

I would try larger screws first. If you can get to the back then machine screws and nylocks might be an upgrade. I wouldn't hesitate to use west system epoxy but would lean towards using the west system 5 minute g/flex product. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Aug 9, 2016

Re: Stus-List fiberglass sheet

rt -- > An HTML attachment was scrubbed... > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160809/974ff3cf/attachment-0001.html> > > -- > ___ This list is supported b

Re: Stus-List LED masthead lights and steaming/deck light

Yes... Sorta. I got the drop in replacements for my aqua signal 40 fixtures. As for their fixtures I'm not exactly sure but they are designed to be a drop in replacement so I would assume so. Marinebeam does come to the show but I think it is a partner vendor... I'll get back to you. Josh Muckl

Re: Stus-List 2016 North East Rendezvous

Bill - you can say in the Mystic Seaport aboard the 80 ft sailing vessel "WIRELESS" https://www.airbnb.com/rooms/12172037 Even cooler than chartering a C&C! OK well almost. But I promise to take you for a sail of you show. Rob Gallagher Wow, that gave me goose bumps! Makes me want to charter

Re: Stus-List LED masthead lights and steaming/deck light

Does not look like Marinebeam comes to the Annapolis show. I signed up for their newsletter. Hopefully there will be promotions. Do the tricolor/anchor and steaming/deck lights require 3 strand wire (2 hot, 1 ground)? Joel On Tue, Aug 9, 2016 at 4:14 PM, Bill Coleman via CnC-List < cnc-list@cn

Stus-List Filling stripped screw holes in fiberglass + core

I need to are rebed some hardware that is screwed in to the cabin, and several screw holes are stripped.​ I'm going to use butyl for the hardware, but is epoxy the best thing to fill the screw holes? Does it need to be West, or is any waterproof hardware store epoxy sufficient? -- Joel 301 541

Re: Stus-List LED masthead lights and steaming/deck light

Yes. Common ground and individual hots. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 9, 2016, at 3:41 PM, Joel Aronson via CnC-List > wrote: > > Do the tricolor/anchor and steaming/deck lights require 3 strand wire (2 hot, > 1 ground)? _

Re: Stus-List fiberglass sheet

+1 for Jamestown Distributors. Fiberglass G10 pieces can be found here: http://www.jamestowndistributors.com/userportal/show_product.do?pid=8758 Chuck Gilchrest S/V Half Magic 1983 Landfall 35 Padanaram, MA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba,

Re: Stus-List LED masthead lights and steaming/deck light

Now that you ask that, that is the one thing I didn’t like about the steaming light, there was very little space for wiring behind the lights. I cut out a little of the plastic to make more room. My wiring comes through the front there, and I have a tie wrap choking the cord, (it is a good

Re: Stus-List fiberglass sheet

On Tue, Aug 9, 2016 at 2:43 PM, Chuck S via CnC-List wrote: > I know some people have been making rigid biminis using frp from Home > Depot and Lowes which comes smooth on one side and rippled on the other. I just gotta answer this one. Years ago I had a guy ask me to install this sheeting in

Re: Stus-List fiberglass sheet

A Google search shows several suppliers but mcmaster.com probably has one of the better selections and more convenient sites: http://www.mcmaster.com/#standard-fiberglass-sheets/=13njq0t Dennis C. On Tue, Aug 9, 2016 at 2:27 PM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > An

Re: Stus-List fiberglass sheet

I got some 1/2", 2'x4' from Jamestown Distributors for ~$200 but, IIRC the McMaster Carr prices are better. Do your own research. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Aug 9, 2016 3:28 PM, "Della Barba, Joe via CnC-List" < cnc-list@cnc-list.com> wrote: > Anyone know a good sour

Re: Stus-List fiberglass sheet

Joe, I know some people have been making rigid biminis using frp from Home Depot and Lowes which comes smooth on one side and rippled on the other. Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md - Original Message - From: "Joe via CnC-List Della Barba" To: "cnc-list

Re: Stus-List fiberglass sheet

http://www.mcmaster.com/#standard-fiberglass-sheets/=13njaf3 — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 9, 2016, at 2:27 PM, Della Barba, Joe via CnC-List > wrote: > > Anyone kno

Stus-List fiberglass sheet

Anyone know a good source for flat fiberglass sheets/rectangular pieces? I have a few fixes that would be much easier that way than trying to smooth out my own DIY pieces. Thanks! Joe Coquina ___ This list is supported by the generous donations of our

Re: Stus-List Help me pick next boat

I love my 30-1 shoal draft, but I must admit, the sweet spot for sailing is in the 12-15kt wind range.  Hard to win phrf in our area when we have so many 3-10kt wind days (33% of the time).I did the Chi-Mac race it her sistership once and it did well once the wind came up.  Accommodations were g

Re: Stus-List Help me pick next boat

We had the 27 Mk 5 as well as the previous mark here on Carlyle.  Both did rather well and our winds are midwest, so we average about 10t with a std dev of 7.Would be great choices.  I did like the look of the Mk 4 better but then that's a personal thing about transom hug rudders.RonWild CheriC&

Re: Stus-List 2016 Northeast Rendezvous

Wow, that gave me goose bumps! Makes me want to charter a C&C on the coast just so I can go! Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Gallagher via CnC-List Sent: Tuesday, August 09, 2016 2:18 PM To: cnc-list@cnc-list.com Cc:

Re: Stus-List LED masthead lights and steaming/deck light

I've spent over $500 at marinebeam. All the nav lights, the foredeck light, interior replacements for 12v florescent tubes, and my favorite... Red/White replacements for BR6 fixtures. Turn the switch on and it's red, turn it off and then back on and its white. Turn it off for at least 3 sec the

Re: Stus-List 2016 Northeast Rendezvous

Nice! On Tue, Aug 9, 2016 at 2:18 PM, Robert Gallagher via CnC-List < cnc-list@cnc-list.com> wrote: > Breaking News: > > http://www.waterwayguide.com/latest-news/event/6847/cc- > northeast-rendezvous-mystic-ct > ___ > > This list is supported by the gen

Stus-List 2016 Northeast Rendezvous

Breaking News: http://www.waterwayguide.com/latest-news/event/6847/cc-northeast-rendezvous-mystic-ct ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contribu

Re: Stus-List LED masthead lights and steaming/deck light

Joel — it’s all direct online through their website. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Aug 9, 2016, at 12:39 PM, Joel Aronson via CnC-List > wrote: > > Are there marinebeam dealers?Defendaer and West don't seem to carry the > product.

Re: Stus-List LED masthead lights and steaming/deck light

Are there marinebeam dealers?Defendaer and West don't seem to carry the product. On Tue, Aug 9, 2016 at 12:59 PM, Frederick G Street via CnC-List < cnc-list@cnc-list.com> wrote: > Brian — I used heat-shrink butt connections, then made a loop behind the > deck/steaming light fixture; so there’s no

Re: Stus-List LED masthead lights and steaming/deck light

Brian — I used heat-shrink butt connections, then made a loop behind the deck/steaming light fixture; so there’s no direct strain on the connections themselves. The three wires for the deck/steaming light are then wire-tied with all the wires coming from the masthead, where’s there’s tons of st

Re: Stus-List LED masthead lights and steaming/deck light

Joel, I also have been very pleased with the new lights I got from MarineBeam. Look for "LED Tri-Color Navigation and All-Around Anchor Light”. I used the old wiring in the mast, unlike Fred, so that circuit was fortunately already fused(!). Eric Cat's Paw C&C 35 Mk II > Joel ? I replaced a

Re: Stus-List LED masthead lights and steaming/deck light

Bill &/or Fred, The steaming / foredeck sounds like a great light and will probably get one. Have had 2 of the Forespar units and the foredeck light dies within a couple years. >From one of the posted reviews it sounds like the electrical connection is >made with butt connectors. Did

Re: Stus-List Depth meter transducer

Nope – just depth. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Read via CnC-List Sent: Tuesday, August 09, 2016 12:00 To: cnc-list@cnc-list.com Cc: johnpr...@comcast.net Subject: Re: Stus-List Depth meter transducer Hi Joe. Is it both depth and temperature

Re: Stus-List LED masthead lights and steaming/deck light

The MarineBeam nav products I got are rated to 3NM, rather than the 2NM for most others. I have to say, they’re very bright and very visible from a distance. I have concerns about the distant visibility of the single-LED solutions like the Orca Green: http://www.defender.com/product.jsp?path=

Re: Stus-List LED masthead lights and steaming/deck light

I will vouch for the deck/steaming light, I got one this spring on Fred’s recommendation, and it is sweet! Seems to be sealed. Very bright. Bill Coleman C&C 39 Erie, PAanimated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Se

Re: Stus-List Depth meter transducer

Hi Joe. Is it both depth and temperature? John Sent from XFINITY Connect Mobile App-Original Message-From: cnc-list@cnc-list.comTo: cnc-list@cnc-list.comCc: joe.della.ba...@ssa.govSent: 2016-08-09 09:34:45 GMTSubject: Re: Stus-List Depth meter transducer I have a spare Horizon 200 KHz

Stus-List New sails for my 38

I've been very pleased with the sails I got from Chesapeake Sailmakers (Chuck O'Malley) in Annapolis. Super service, and the roller furling 145 sails very well when furled to 110 as conditions dictate. On the Landfall 38, sailing jib only is a good option in heavy weather. The sails have held up

Re: Stus-List LED masthead lights and steaming/deck light

Joel; FWIW I am replacing the Aqua Signal Series 40 Quickfit tricolor w/anchor light on Imzadi in the next week or so. I was happy with the light, but it came up missing after a 30+ knot squall (with some serious chop) down in the Neuse. The Quickfit feature is probably a good idea if you ta

Stus-List LED masthead lights and steaming/deck light

Hi Joel, I installed the Signal Mate tri-color 2 years ago and I like it a lot. http://www.ahoycaptain.com/signalmate_TRIANC2P.html Definitely the brightest / most visible tri-color or running light on the lake, it's clearly visible in the day time.. It's built to mil specs out of finely mac

Re: Stus-List Help me pick next boat

Thanks - sounds like the 27 is the overwhelming favorite from this impartial crowd :) Will take a look John > On Aug 9, 2016, at 9:52 AM, Jerome Tauber via CnC-List > wrote: > > 27-V 4'10" draft but is one of the best sailing boats C&C made. I have one > that may be for sale at end of seas

Re: Stus-List Help me pick next boat

Just be aware that there are several versions of the 27, and the 27-V is a completely different boat than any of the earlier ones. You can find out what the different iterations offer on Stu's website. I agree with Jerry and Chuck about the 27-V. It is a great boat, and fits your request parame

Re: Stus-List Help me pick next boat

27-V 4'10" draft but is one of the best sailing boats C&C made. I have one that may be for sale at end of season. Very nice condition with Yanmar 1G diesel. Jerry J&J -Original Message- From: Chuck Gilchrest via CnC-List To: cnc-list Cc: Chuck Gilchrest Sent: Mon, Aug 8,

Re: Stus-List Depth meter transducer

I have a spare Horizon 200 KHz transducer. It will work with most 200 KHz depthfinders. $25 donation to the list and it is yours ☺ Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Monday, August 08, 2016 22:13 To: CnClist Cc: Dennis C.

Re: Stus-List was C&C 33 Main Sail Sheave, now how to get to the top of mast

I can get up there no problem. We have a bosun's chair. That's how I know it needs changing. It still is functional but the wire rope from the Topping Lift had been rubbing on the pulley and had filed it down to a sharp edge. Jessica 1975 C&C 33 On Tuesday, August 9, 2016, Marek Dziedzic via CnC

Re: Stus-List LED masthead lights and steaming/deck light

Joel — I replaced all my mast lighting this past winter with products from MarineBeam: http://marinebeam.com/led-tri-color-navigation-and-all-around-anchor-light/ http://marinebeam.com/led-masthead-foredeck-combinatio

Re: Stus-List US Watercraft / C&C 30

Randy Borges r...@waterlinesystems.com and Pilar Jensen pjen...@uswatercraft.com Best regards, Jack Fitzgerald HONEY US12788 C&C 39TM On Tue, Aug 9, 2016 at 9:07 AM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Do we have a contact email at US Watercraft? > > -- > Joel > 301 541 8

Re: Stus-List C&C 33 Main Sail Sheave

Hi John. My sheaves had worn bushings, and these were easily replaced with stock bushings from Brafasco (less than $20). In the 33-2 you unbolt the cap on the masthead, and lift out the axle with the topping lift and main halyard sheaves. I suppose it could be done with the mast up, but I wou

Stus-List LED masthead lights and steaming/deck light

It will be too hot in Annapolis for me this weekend, so I want to start on my boat show shopping list. I want to replace my anchor light with an LED anchor/Tri combo and replace the steaming light with a steaming/deck light. Any favorites? Any dogs to avoid? -- Joel 301 541 8551 __

Stus-List US Watercraft / C&C 30

Do we have a contact email at US Watercraft? -- Joel 301 541 8551 ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!

Re: Stus-List was C&C 33 Main Sail Sheave, now how to get to the top of mast

John, if you want to be able to reach to the very top of the mast, get yourself a harness and an aider (e.g.: http://blackdiamondequipment.com/en_CA/big-wall-climbing/alpine-aiders-BD390050ALL1.html). Or make yourself a pair of stirrups that you can attach to the a halyard (and a harness).

Re: Stus-List C&C 33 Main Sail Sheave

I wanted to replace the sheaves on Enterprise. I was advised by Klacko Spar who manufactured the mast to send them the old sheaves. They told me C&C did not necessarily use the same sheave on a particular mast. More what every they had on hand at the time. I think it would be difficult to change