Hi
I apologise if my email is wrong but you could also rerun maldet install, or
try maldet -d
I think this is an issue with maldet
Many thanks
John
> On 19 Sep 2015, at 08:57, Arnaud Jacques / SecuriteInfo.com
> wrote:
>
> Hello Otto,
>
>
>> This file is miss
ons on /var/run/clamav with no
noticeable affect. In the past I had to change ownership to Debian-exim
but that does not seem sufficient.
What should I do next? I get the same error for a couple of versions,
103 and 104 I think.
==John ffitch
___
c
sr/sbin' '--prefix=/usr/--sysconfdir=/etc/clamav/'
sizeof(void*) = 8
Engine flevel: 125, dconf: 125
#
I am starting clamd on the command line with
clamd -c /etc/clamvav/clamd
The reference to --sysconfdir is certainly odd
I found an old clamd binary that now seems to work. We wil
>
> You can compile it youself from source,
thanks, I'll have to try that then
> or upgrade to Fedora 7 or 8
not an option
thanks though.
john
-
This email has been scanned for viruses by Ratser
am running fedora 6
and when running freshclam I get the following error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.91.1 Recommended version: 0.91.2
but i can't find that version for fedora 6
any ideas any one?
thanks
to be up to date
any ideas anyone?
sincerely
John Mazurka ( [EMAIL PROTECTED] )
-
This email has been scanned for viruses by Ratservers Ltd. If a virus
had been found there would be a message in the subject of the
ha
Have fixed the bit about LibClamAV Warning:
**
LibClamAV Warning: *** The virus database is older than 7 days. ***
LibClamAV Warning: ***Please update it IMMEDIATELY! ***
LibClamAV Warning:
-milter version 0.88.7
however when I try to configure with --enable-milter on the new version 0.92
I get:
configure: error: Cannot find libmilter
any idea where I can find it?
john
___
Help us build a comprehensive ClamAV guide: visit http://wiki.
from the server was
getting bounced back to the postmaster mail box. What a nightmare...
eventually I got back to almost where i was before this all started. I
have all kinds of versions of all kinds of thigs all over the place now
and am gonna leave it like that. Cheers for thehelp tho
hi
have just installed the latest version and get the following error:
WARNING: Your version of ClamAV is not compatible with this module.
Please check that you have installed a recent enough version of ClamAV.
this is on both fedora 7 and 9 too
any ideas anyone?
john
ps sorry Emanuel
clamav to run freshclam
I will update next time freshclam errors with same error but would be
verbose to help
Many thanks
John
Centos 6
ERROR: Update failed.
ERROR: Database update process failed: Failed to read/write file to database
directory (10)
WARNING: fc_update_databases
ld be
used as they are hashed out
I am sorry if I am wrong
Many thanks
John
folder perms
drwxr-xr-x. 3 clamav clamav4096 Jan 23 15:16 clamav
-rw-r--r-- 1 clamav clamav296388 Nov 21 12:51 bytecode.cvd
-rw-r--r-- 1 clamav clamav 58022101 Jan 23 15:15 daily.cvd
-rw-r--r-- 1 clamav c
Hi Matus
Many thanks, much appreciated
Please see result which is showing clamav and we do not run freshclam under
root - it is run under clamav (244)
I am sorry if I am wrong and thank everyone for their help
Many thanks
John
ls -la /var/clamav/tmp
total 8
drwxr-xr-x 2 clamav clamav 4096
Clam?
Peace,
John
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Can someone that knows what's in the data base give me
a short paragraph
here?
Peace,
John
Tomasz Kojm wrote:
On Sat, 18 Nov 2000 09:34:21 -0600
john <[EMAIL PROTECTED]> wrote:
Hi Folks.
How many signatures does clam have in its data base for viruses and
Trojans that attack OpenBSD a
ding the file. Can I pass the file to be scanned via the
network? What am I doing wrong? Or am I missing the point entirely, and
clamd will not work via network.
Thanks in advance...
John
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Stephen (& Tomasz),
Thanks for the quick responses. I'm trying running clamd on the public
server (milter does not seem to be available for exim4) and now I'm
getting a 'bad file descriptor' error???
Sorry to be a pain...
John
Stephen Gran wrote:
On Thu, Jan 20, 2005 a
John wrote:
Stephen Gran wrote:
On Thu, Jan 20, 2005 at 12:37:05PM -0500, John said:
Hello all,
I have searched the archives, FAQ, and docs, but was unable to find
any info I could use. If I have missed it please feel free to RTFM
(hopefully with a link) me.
I have a public email/web/dns
Hi all,
I running Debian sarge and this morning freshclam started complaining in
it's logs about ClamAV being outdated, Current functionality level=3,
required=4. I don't see any new updates for sarge, any idea when they
will be avail? Or is there another solution?
T
Stephen Gran wrote:
On Fri, Jan 28, 2005 at 01:33:11PM -0500, John said:
Hi all,
I running Debian sarge and this morning freshclam started complaining in
it's logs about ClamAV being outdated, Current functionality level=3,
required=4. I don't see any new updates for sarge, any idea
Jim,
You can go here to pick up the update:
http://people.debian.org/~sgran
or wait a couple of days till it migrates from sid to sarge.
John
Jim wrote:
I am using clamav and I have done an "apt-get dist-upgrade clamav" but
when I run freshclam I get "Your ClamAV installation is OU
, it has the potential of being a customer service nightmare.
Telling staff a week later in a report is an improvement, might be too
late to avoid the bad karma.
just my 2 cents...
--
Have a great day...
John Cichy
813-335-2505 (Cell)
813-948-6438 (Home
[EMAIL PROTECTED] wrote:
At 04:59 AM 2/5/2005, you wrote:
The solution to that problem is simple: fire the email admins. Period.
The company actually thought it was easier to let our entire group go!
Of course that might be the reason they were purchased this week.
--
Have a great day...
John
ble?
I suspect that most people use clamdscan to do "one off" scanning,
(mail servers, etc)
In my use case I want to leverage clamd, so that I can take advantage
of the SysLogging capabilities of clamd, but I'm looking for more of a
traditional daily "scan
clamdscan" solution is working. If
someone on the ClamAV team want's more details about what's happening
with my clamdscan i'm happy to provide them.
/John
___
Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq
http://www.clamav.net/contact.html#ml
ons (warranted or not) on that are different now, so
I'm just trying to demonstrate diligence. by having ClamAV installed
and scanning some key directories.
/John
On Wed, Apr 29, 2015 at 12:27 PM, G.W. Haywood
wrote:
> Hi there,
>
> On Wed, 29 Apr 2015, John McGowan wrote:
>
x27;t think this issue is permissions related. But I could still
be wrong.
I tried it without changing who clamd was running as and got
completely different permissions errors than what I'm seeing now.
/John
___
Help us build a comprehensive Cla
The clamav packages for CentOS 7 in the EPEL repository don't seem to
produce a working config after installation.
Anyone have any tips/walkthroughs on getting the basics up and running
(whatever you consider the basics to be) on CentOS 7?
I've run clam on Debian a long time ago and am revisiting
Yeah. I'm not sure I mind it being split, but there seems to be
inconsistencies, missing config files, wrong username, bad or no systemd
files etc
Working off of this right now:
http://linux-audit.com/install-clamav-on-centos-7-using-freshclam/ so I
can update a puppet module to make this wo
Thanks Dennis, I will probably take your approach until the RPMs in the
EPEL are usable.
It would be nice to have them functional out of the EPEL or just have them
removed all together. It certainly doesn't do that ClamAV project any
favors to leave it in its current state of packaging.
On Sun,
I'm trying to achieve the following: auto mount USB key and detect if a
user uploads or downloads a virus from it.
An additional feature I can live without: access prevention upon virus
detection.
The "OnAccessIncludePath" option in clamd configuration file seems the way
to go. The best solution w
On 12/10/16 16:57, Reindl Harald wrote:
>
> are you kidding or why the hell did you not read the answers to that
> foolish "unsubscribe" post you are quoting? how did guys like you manage
> to subscribe without holding hand?
>
>> permanenttsb.ie
Bankers.
Very worrying ;-)
signature.asc
Get TypeApp for Android ___
clamav-users mailing list
clamav-users@lists.clamav.net
https://lists.clamav.net/mailman/listinfo/clamav-users
Help us build a comprehensive ClamAV guide:
https://github.com/Cisco-Talos/clamav-documentation
https://docs
tents to new files.
Take the disks out, put them in a computer that can run from a linux
live cd, hope it has HFS support, and go from there?
--
-- John E. Jasen (jja...@realityfailure.org)
-- No one will sorrow for me when I die, because those who would
-- are dead already. -- Lan Mandragoran,
?)
b) has anyone solved it by just increasing the archive file limit? If
so, what reasonable number have you come up with?
Other thoughts of conclusions about all of this? (other than "don't
use MS Office" -- that's outside the scope of my powers)
John
_
Hope I haven't missed this one being discussed... but ...
APER is a project hosted at Google Code (Anti-Phishing Email Reply)
that tracks From, Reply-to, and Body URLs that match known phishing
attacks. There are a few examples for how to use it ... but I was
wondering:
Has anyone turned this in
>Check out Julian Field's ScamNailer:
>
>http://www.scamnailer.info/
>
>"18/10/2009 - New "scamnailer.ndb" ClamAV signature database is now
>available from http://www.mailscanner.eu/scamnailer.ndb. This is updated
>very frequently. Do not download it more than once per hour!"
>
>Cheers,
>
>Phil
Wh
>I have to ask however. You mentioned it contains phish urls as well.
>I have not been able to find that. However, we track phish
>urls/domains in winnow_phish_complete.ndb
>
>Tom
When you download their distribution, you get 4 files:
phishing_cleared_addresses
phishing_from_addresses
phishing_li
>Firstly, spear.ndb generated from the APER feed and has been for a while now:
>
>http://sanesecurity.co.uk/databases.htm
I didn't realize spear.ndb includes APER. That's great news (as we
already use spear.ndb) ... looks like implementing APER is pretty
straight forward (and low effort) for me :
On Sun, 2009-11-15 at 16:17 -0600, Chris wrote:
> I've seen this in the last three freshclam runs:
>
> ERROR: SubmitDetectionStats: Remote server reported temporary failure:
> under maintenance
>
> Curious as to whether anyone else sees the same
>
Yes, seen it here to
I have, I see that there is the main.cvd, daily.cvd and daily.cld
files which are all the ones that need to get updated.
I believe it is the two daily.* files that need to be the same version at
all times, correct? Is main.cvd the engine then?
>
> On 2010-01-07 19:49, John Corelli wrote:
> > Hi All -
> >
> > I'm new to clamav, but I've spent time looking through the archives
> > and FAQs, so I hope my question is not too "newbish".
> >
> > I'm running clam 0.95.3 on
> >
> > Hi John,
> >
> > Wanted to jump in to say that I found that confusing also.
> This is how
> > I read it:
> >
> > 1) On external (meaning: not CentOS) machine: run freshclam (which
> > will pick up the new {main,daily}.c[vl]d), then copy
> removes MSRBL (as it's no longer being updated)
Did they declare themselves to be defunct, or are you declaring it for
them (without any actual announcement from them)?
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http:/
>>> removes MSRBL (as it's no longer being updated)
>> Did they declare themselves to be defunct, or are you declaring it for
>> them (without any actual announcement from them)?
> Do you have any indication that MSRBL is still alive and that the
> signature databases are being actively updated?
> Then you don't have a clue and are obviously not qualified to make a
> judgment call on this matter.
They used to routinely have some signatures that would go weeks, even
months, without updates. I used tolook at their signatures and see
that they were a month or two old ... and a few months
>> Most recent update from them was 3 months ago.
>
> rsync rsync://rsync.mirror.msrbl.com/msrbl/MSRBL-SPAM.ndb
> -rw-r--r-- 244643 2009/07/27 01:21:23 MSRBL-SPAM.ndb
>
> rsync rsync://rsync.mirror.msrbl.com/msrbl/MSRBL-Images.hdb
> -rw-r--r-- 181337 2009/07/24 03:40:17 MSRBL-Images.hdb
rsync rsyn
>> rsync rsync://rsync.mirror.msrbl.com/msrbl/MSRBL-Images-FULL-SoN.hdb
>> -rw-r--r-- 19030813 2009/10/07 15:50:05 MSRBL-Images-FULL-SoN.hdb
>
> Only the clueless would use that database.
Which is irrelevant to the point. The point isn't "is it a
reasonable/accurate/etc. database", the point i
> MSRBL (as it's no longer being updated)
And here's the answer from the actual project:
http://msrbl.blogspot.com/2010/01/msrbl-status-update-as-some-of-you-have.html
It's amazing what information you get when you actually talk to people.
___
Help us
Ok...so it is. Apparently the version I'm getting through apt-get on ubuntu
is .95.2. Looking at the site the newest is .95.3. Well ok so I need to
update. However I have a major issue. I was planning to use clamav to scan
user uploaded files, however when I import pyclamav and it register's o
2010/3/19 Török Edwin
> On 03/19/2010 09:16 AM, John Williams wrote:
> > Ok...so it is. Apparently the version I'm getting through apt-get on
> ubuntu
> > is .95.2. Looking at the site the newest is .95.3. Well ok so I need to
> > update. However I have a major
2010/3/19 Török Edwin
> On 03/19/2010 10:25 AM, John Williams wrote:
> > 2010/3/19 Török Edwin
> >
> >> On 03/19/2010 09:16 AM, John Williams wrote:
> >>> Ok...so it is. Apparently the version I'm getting through apt-get on
> >> ubuntu
> &
On Tue, Mar 30, 2010 at 10:56 AM, anil chalamalasetti <
achalamalase...@gmail.com> wrote:
> I am trying to scan files that have been uploaded for Viruses and one
> of the features I am looking for is to scan for XSS in uploaded HTML
> files. Can the CLAMAV support this kind of scanning?
>
> Thank
all my remaining memory -- namely
it runs at 180MB and increasing. My mail volume is only about 10 emails per
hour.
Is there anything I can do to figure out why it would be using up so much
memory?
Thanks,
John
___
Help us build a
s I can see the
clamd and freshclam log files look fine.
Any ideas about this?
John.
--
John Horne, University of Plymouth, UK
Tel: +44 (0)1752 587287Fax: +44 (0)1752 587001
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.
On Sun, 2010-09-26 at 23:09 +0300, Török Edwin wrote:
> On Sun, 26 Sep 2010 20:02:42 +0100
> John Horne wrote:
>
> > Hello,
> >
> > Using ClamAV 0.96.2, for some reason over the weekend we have started
> > to see these error messages in our freshclam log file:
Any ideas here? Anyone else seeing this?
~$ sigtool --list-sigs | grep MBL_207346
MBL_207346
John
--
John Madden / Systems Engineer III
Office of Technology / Ivy Tech Community College of Indiana
Free Software is a matter of liberty, not price. To understand
the concept,
| sigtool --decode-sigs
That seems illogical. I did this instead:
sigtool --find-sigs MBL_207346 | sigtool --decode-sigs
VIRUS NAME: MBL_207346
DECODED SIGNATURE:
www.
If "www." is truly the signature, well, I think we've found the problem.
On 02/22/2012 10:49 AM, John Madden w
Oh, and I now realize that this is outside of freshclam's control, being
a sanesecurity signature. I removed the mbl.db and disabled that
cronjob until we sort this out...
On 02/22/2012 12:51 PM, John Madden wrote:
I wasn't able to receive my own post...
freshclam didn't
vendors such as
ESET, Kaspersky or BitDefender offer.
Please tell me if there is any solution for this.
Thanks
John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
Network
On 12/03/2012 03:23 PM, Jim Preston wrote:
> On 12/03/2012 02:25 PM, John Murphy wrote:
>> Hello,
>> I am looking for deploying and managing ClamAV in a LAN with 150
>>workstations and 1 server (Windows clients and server) and need to force
>>workstations to rec
of these messages every day. I assume the remote server
is under load, and that there is basically nothing we can do (set) about
this?
John.
--
John Horne, Plymouth University, UK
Tel: +44 (0)1752 587287Fax: +44 (0)1752 587001
___
Help us build
On Tue, 2013-04-30 at 12:47 -0400, Shawn Webb wrote:
> Hey John,
>
> We've identified and resolved the problem. Thank you for using ClamAV and
> for submitting detection statistics.
>
Thanks for this. We have seen no further temporary failure messages.
J
Thanks !
Is it possible to know a time when these bad signitures were made
available ( yesterday morning ) ? Eg so as to know how long a period in
which I was NOT delivering a subset of user mail.
-john
On 8/22/13 6:32 AM, Ian Eiloart wrote:
Hi all,
André, the maintainer of the Malware
- Original Message -
From: "Claus Atzenbeck" <[EMAIL PROTECTED]>
To: "ClamAV Users"
Sent: Thursday, March 08, 2007 3:33 AM
Subject: [Clamav-users] --mbox option
Hi all,
I use clamscan to check my incoming mail. This is what I have used to
check it (using Procmail):
/sw/bin/clam
tween these files! Thanks - John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users.html
- Original Message -
From: "Noel Jones" <[EMAIL PROTECTED]>
To: "ClamAV users ML" ; "ClamAV users ML"
Sent: Thursday, March 08, 2007 11:49 PM
Subject: Re: [Clamav-users] daily.cvd and daily.info
At 08:35 PM 3/8/2007, John Fleming wrote:
I u
- Original Message -
From: "John Fleming" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Friday, March 09, 2007 7:06 AM
Subject: Re: [Clamav-users] daily.cvd and daily.info
- Original Message -
From: "Noel Jones" <[EMAIL PROTECTED]
Why do I get this "every-other" error behavior? It can't find or parse the
config file once, then the next time it can? And it's a pattern, not just
this one occurrence. freshclam.conf below
--
Received signal: wake up
ClamAV update process started at Tue
stall from volatile to take
automatically. I'm not sure what you meant about "including it in the
list". - John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users.html
cally. I'm not sure what you meant about "including it in the
list". - John
Sorry, I used to be able to run:
apt-get -t sarge install clamav clamav-daemon
but this did not upgrade freshclam from 0.87 to 0.90.
So, in the future I will run:
apt-get -t sarge install clamav cla
March 5th!
Thoughts please? Thanks - John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users.html
I notice above that the main.cvd version is "42", the same number reported
for the signatures in my headers. Coincidence?? I have no idea what to do
with this. - John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users.html
- Original Message -
From: "Dennis Peterson" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Wednesday, March 14, 2007 9:40 PM
Subject: Re: [Clamav-users] 0.90.1 not finding viruses
John Fleming wrote:
I just realized to my horror that clamav has not f
Dana Kashubeck wrote:
I am not able to compile the latest stable version on Mac OS X Server
10.3. There are a few different warnings here and there, most of them
are shown while compiling unrar.c:
...
The compile ends with:
/usr/bin/libtool: no library created (no object files in input file
activity gets logged. Debian stable, clamav 0.90.1 Calling
with clamassassin 1.2.4 (latest update to work with 0.90) Any more ideas or
troubleshooting? Thanks - John
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http
- Original Message -
From: "Dennis Peterson" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, March 15, 2007 8:58 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1 not
findingviruses
John Fleming wrote:
- And the clamav
- Original Message -
From: "John Fleming" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, March 15, 2007 10:31 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1
notfindingviruses
- Original Message -
From: "Den
- Original Message -
From: "Dennis Peterson" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, March 15, 2007 10:42 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1not
findingviruses
John Fleming wrote:
If not syslog, then
- Original Message -
From: "Todd Lyons" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 16, 2007 3:07 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1 not
findingviruses
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, Mar 15, 2007 at 07:11:
- Original Message -
From: "Tomasz Kojm" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 16, 2007 7:49 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1
notfindingviruses
On Fri, 16 Mar 2007 19:45:10 -0400
"John Fleming" <[EMAIL PROTEC
- Original Message -
From: "Dennis Peterson" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Friday, March 16, 2007 8:04 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users] 0.90.1not
findingviruses
Tomasz Kojm wrote:
On Fri, 16 Mar 2007 19
- Original Message -
From: "Stephen Gran" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 16, 2007 8:12 PM
Subject: Re: ClamAV not LOGGING viruses was [Clamav-users]
0.90.1notfindingviruses
On Fri, Mar 16, 2007 at 08:03:14PM -0400, John Fleming said:
That's not d
Randal, Phil wrote:
Does clamav have any certificate of any labs like www.icsalabs.com?
And how does that make it a better product, exactly?
Who said anything about a better product?
Certification doesn't indicate a better product. It indicates either
that someone has shown that it has c
-> Log file size limit disabled.
Tue Apr 3 19:46:36 2007 -> Reading databases from /var/lib/clamav/
Tue Apr 3 19:46:36 2007 -> ERROR: CVD extraction failure
Translate/explain/solutions? THANKS - John
Debian Sarge
___
Help us build a comprehensive
- Original Message -
From: "René Berber" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, April 03, 2007 9:19 PM
Subject: [Clamav-users] Re: CVD extraction error
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
John Fleming wrote:
I had a power failure this afternoon that o
>
> As more users upgrade from 0.8 to 0.9, this problem will disappear with
> future updates. Version 0.9 only transfers the difference between CVDs
> instead of the files in full."
>
Which isn't going to happen, at least for me, until 0.9 runs on mac os x
10.3.9.
Right now, it wont compile.
Dennis Peterson wrote:
>
> You need to have better monitoring and notification, and a mail system
> that delivers mail even if there is a fatal error in the AV tool. This
> is hardly a ClamAV problem.
Depends on what your goals are.
For me, a reliable email system does not just mean "mail get
Dennis Peterson wrote:
> John Rudd wrote:
>> Dennis Peterson wrote:
>>
>>> You need to have better monitoring and notification, and a mail system
>>> that delivers mail even if there is a fatal error in the AV tool. This
>>> is hardly a ClamAV
man \
--disable-zlib-vcheck \
--disable-clamuko \
--disable-clamav \
--enable-bigstack \
--disable-gethostbyname_r \
--enable-readdir_r \
--disable-dependency-tracking \
--with-user=sweep \
--with-group=sweep \
--without-libcurl
I have been running 0.90 since it
Jan-Pieter Cornet wrote:
> On Mon, Jun 18, 2007 at 09:39:23AM -0400, Christopher X. Candreva wrote:
>> On Mon, 18 Jun 2007, Peter Boosten wrote:
>>
>>> I had some problems running clamd on one of the machines a long time
>>> ago, and with mimedefang running clamscan is the second option (which
>>>
Henrik Krohns wrote:
> On Mon, Jun 18, 2007 at 10:45:30PM -0500, Eric Rostetter wrote:
>> if you have sufficient system resources, and are willing to
>> tolerate slow delivery times (up to 4 minutes on my system, with clamscan
>> on 0.90.3 for example).
>
> I'm just amazed by all the nitpicking i
John Rudd wrote:
> (* "questionable"? "not idea"? sure.. unacceptable to the point of
> firing someone? that's incompetent management)
That should have said "not ideal", not "not idea".
___
Hel
From past discussion on this list, it was discussed "how easy" it would
be to throw together a script to check validity before putting a message
into production. But I don't recall anyone ever actually offering up
their script. Earlier today, someone had posted something to the
SpamAssassi
Noel Jones wrote:
> At 12:59 PM 7/12/2007, John Rudd wrote:
>
>> From past discussion on this list, it was discussed "how easy" it would
>> be to throw together a script to check validity before putting a message
>> into production. But I don't recall an
Noel Jones wrote:
> At 02:02 PM 7/12/2007, John Rudd wrote:
>>> Such scripts have
>>> been posted frequently and several good ones are available from
>>> http://sanesecurity.co.uk/clamav/usage.htm
>> I saw the supporting material on sanesecurity's dow
Jeff Thurston wrote:
>> Jeff Thurston wrote:
>>> I thought ClamAV was able to catch these "Greeting Cards from family
>>> member", our domain keeps getting these emails in large quantities even
>>> after upgrading to ClamAV 0.90.3 recently.
>>>
>>> Do I need to upgrade again to .91?? I'm hesitant t
Christopher Checca wrote:
> I will be on vacation until July 30, 2007.
Think his house is unoccupied? Maybe we can throw a party ...
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users
Identifying the exact nature of a signature, just from the name, is a
major pain. Especially when you throw in the 3rd party signatures. The
location in the signature name of the authority it came from varies from
group to group (and isn't present in the ClamAV signatures at all).
Whether it
Scott Beck wrote:
> Hi,
>
> Another note on this issue. Someone just reported that without the
> CL_SCAN_PHISHING_DOMAINLIST option set they are seeing libclamav hang.
> Please consider adding this to CL_SCAN_STDOPT or remove the option and
> turn it on internally always or reverse the option and
1 - 100 of 485 matches
Mail list logo
