On Thu, Feb 15, 2024 at 3:35 PM Rich NE1EE wrote:
>
> Just to complete the thread on +-,
> SFT-D (offset dir) and OFFSET (value) function only in VFO mode.
> + OR - shown /only/ in VFO mode.
> MR mode uses and stores explicit RX and TX frequencies.
> +- (both) is shown for all channels in MR mode.
Just to complete the thread on +-,
SFT-D (offset dir) and OFFSET (value) function only in VFO mode.
+ OR - shown /only/ in VFO mode.
MR mode uses and stores explicit RX and TX frequencies.
+- (both) is shown for all channels in MR mode.
~R~ NE1EE
On 2024-02-15 11:13:, Rich NE1EE wrote:
>I had ju
I had just finished a session with another ham where I explained CTCSS on
several radios. I thought that the UV-5s showed + or -, like the others. I was
wrong. I just checked them both. It's just as you wrote. Thanks for the comment.
73 ~Rich~ NE1EE
On 2024-02-15 08:40:, John Wuest wrote:
>The "
I have the BaoFeng UV-5RTP and the BTECH UV-5X3. I program them with chirp, and
nary a problem. The images that show both +- on at the same time give me pause.
I don't have any experiences with Baofeng, Kenwood, Icom, and Yaesu that has
them both on. So...is there some way to do a factory reset
When I want to use 2 radios to check, I either place one in another room with
the volume up so that I can hear it, or I place it farther away, and use my
phone to record a few minutes, giving me time to return to the first radio and
send a test message, return and stop the recording.
Rich NE1EE
id.danplanet.com> on behalf of ken hartmann <
> 115ir...@gmail.com>
> *Sent:* Wednesday, February 14, 2024 8:20 PM
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] Baofeng UV-5R8W Repeater Config Error
>
> If its the correct frequency and offset and or ctcss cod
ght be out of date.
>
>
>
> Joe Pizzi
>
> KI5LST
>
>
>
> *From:* chirp_users-boun...@intrepid.danplanet.com <
> chirp_users-boun...@intrepid.danplanet.com> *On Behalf Of *A Boer
> *Sent:* Wednesday, February 14, 2024 4:00 PM
> *To:* Discussion of CH
: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5R8W Repeater Config Error
Thank you, Jim. Sorry, but I did not notice your text is actually below my
original e-mail in your two replies today. I will address both replies here.
Regarding your latest comment below, I notice that I do not
Hi Alex,
On Wed, Feb 14, 2024 at 10:41 AM A Boer wrote:
>
> Good day, CHIRP Users! I am having some trouble using CHIRP with some new
> radios I am trying to program. Simply put, I cannot get the repeater
> channels to work. I downloaded the .img file from one radio into CHIRP,
> copied and
Hi Alex,
On Wed, Feb 14, 2024 at 10:41 AM A Boer wrote:
>
> Good day, CHIRP Users! I am having some trouble using CHIRP with some new
> radios I am trying to program. Simply put, I cannot get the repeater
> channels to work. I downloaded the .img file from one radio into CHIRP,
> copied and
You can't upload one img file to both radios. You must consider all radios as
different and download from each before editing and uploading.
> On 14/02/2024 10:35 EST A Boer wrote:
>
>
> Good day, CHIRP Users! I am having some trouble using CHIRP with some new
> radios I am trying to program. S
Score another point for Linux - it does not care if the chip in your cable
is a fake Prolific, it just works anyway! There is also a driver available
for Mac that can handle the fake Prolific chips. It seems only Windows has
this problem.
On Fri, Jan 10, 2020 at 11:36 PM Jardy via chirp_users <
c
Being programmable by Chirp has NOTHING to do with fake chips. That's a Windows
driver issue.
> On 11 January 2020 at 01:34 Jardy via chirp_users
> wrote:
>
> Your radio might not be programmable by CHIRP because you have a fake
> Prolific chip on your cable. Have you checked that out?
>
Your radio might not be programmable by CHIRP because you have a fake Prolific
chip on your cable. Have you checked that out?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said
device really cares about.
> On Jan 10, 2020, at 18:26, Phil wrote:
>
On Thu, Jan 9, 2020 at 9:11 AM Troy Hunter wrote:
>
> Thanks Amnon,
> I believe I have seen the table you are talking about. My model wasn't listed
> on the page that I saw. Which makes me believe my model isn't supported, but
> I've had at least three people tell me that they have my radio and
t?
Best regards,
Troy
From: chirp_users-boun...@intrepid.danplanet.com
on behalf of Amnon Zohar
Sent: Thursday, January 9, 2020 6:01 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] BAOFENG UV-5R8W
On chirp site there is a table of all variant names with the
*From:* chirp_users-boun...@intrepid.danplanet.com <
> chirp_users-boun...@intrepid.danplanet.com> on behalf of Ernesto Xload <
> xload...@gmail.com>
> *Sent:* Wednesday, January 8, 2020 10:57 PM
> *To:* Discussion of CHIRP
> *Subject:* Re: [chirp_users] BAOFENG UV-5R8W
>
> I've a
That's great news Ernesto,
What model radio are you selecting in CHIRP?
From: chirp_users-boun...@intrepid.danplanet.com
on behalf of Ernesto Xload
Sent: Wednesday, January 8, 2020 10:57 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] BAOFENG UV
that you think would work? I've
tried several.
Best regards,
Troy
From: chirp_users-boun...@intrepid.danplanet.com
on behalf of George Hale Jr.
Sent: Wednesday, January 8, 2020 11:34 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] BAOFENG UV-5
It is listed on Baofengs website. UV-5R 8 watts.
On Wed, Jan 8, 2020 at 11:58 PM Ernesto Xload wrote:
> I've a BAOFENG UV-5R8W and I can program It without only problem with
> chirp. I'm using Xubuntu 18.04 and current daily CHIRP version.
>
> Best regards.
>
> El jue., 9 ene. 2020 a las 4:43, P
I've a BAOFENG UV-5R8W and I can program It without only problem with
chirp. I'm using Xubuntu 18.04 and current daily CHIRP version.
Best regards.
El jue., 9 ene. 2020 a las 4:43, Phil () escribió:
> On 9/1/20 1:59 pm, Troy Hunter wrote:
> > though Windows 10 says there is no problem with the c
On 9/1/20 1:59 pm, Troy Hunter wrote:
> though Windows 10 says there is no problem with the cable, there still
> might be a driver problem?
You might also consider that you have a fake radio. I eventually
discovered that I have one. It works but the radio is not programmable
via Chirp.
I coul
From: chirp_users-boun...@intrepid.danplanet.com
on behalf of Jim Unroe
Sent: Wednesday, January 8, 2020 7:07 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] BAOFENG UV-5R8W
On Wed, Jan 8, 2020 at 9:16 PM Troy Hunter wrote:
>
> First I'd like to say, what an awesome, helpf
From: chirp_users-boun...@intrepid.danplanet.com
on behalf of Jim Unroe
Sent: Wednesday, January 8, 2020 7:07 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] BAOFENG UV-5R8W
On Wed, Jan 8, 2020 at 9:16 PM Troy Hunter wrote:
>
> First I'd
On Wed, Jan 8, 2020 at 9:16 PM Troy Hunter wrote:
>
> First I'd like to say, what an awesome, helpful group,
> Does anyone have any experience with the BAOFENG UV-5R8W? I Just got one from
> ABBREE through Amazon. Has anyone had success with any type of software for
> programing? This is suppos
First I'd like to say, what an awesome, helpful group,
Does anyone have any experience with the BAOFENG UV-5R8W? I Just got one from
ABBREE through Amazon. Has anyone had success with any type of software for
programing? This is supposedly a three power model. I have tried a few models
on CHIRP
26 matches
Mail list logo
