I have the BaoFeng UV-5RTP and the BTECH UV-5X3. I program them with chirp, and nary a problem. The images that show both +- on at the same time give me pause. I don't have any experiences with Baofeng, Kenwood, Icom, and Yaesu that has them both on. So...is there some way to do a factory reset on the Baofeng UV-5R8W? Offhand I'd not trust any operation unless I felt sure that the radio was operating 100% iaw mfg intent.
And...a chirp list related note...I had saved the original email for this thread, because of the images, but when I looked it up on the chirp mail list, all that I saw were the replies. 73 Rich NE1EE On 2024-02-14 10:35:, A Boer wrote: >Good day, CHIRP Users! I am having some trouble using CHIRP with some new >radios I am trying to program. Simply put, I cannot get the repeater channels >to work. I downloaded the .img file from one radio into CHIRP, copied and >pasted the repeater configuration from the CHIRP list of repeaters and pasted >it into my .img file, then uploaded the .img file into both radios. The >radios will not talk to each other through the repeater. I have gory details >with screenshots and radio display pictures in the attached .jpg files. If >anyone has the time to review those details and has some ideas on how to fix >this problem, I would certainly appreciate the feedback. Thank you for your >time. > >Alex Boerner >KJ7CPZ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
