Hi,
after some time of testing I want now to go live with our new bacula
server. Before I do taht I want to clean to database.
I followed this chapter:
Re-initializing the Catalog Database
http://www.bacula.org/dev-manual/Installi_Configur_PostgreS.html#SECTION00523
cd
./drop_b
Martin Simmons schrieb:
> > Since I also see information about jobs done by a second bacula install with
> > 'status client', I guess this information is stored somewhere else. How can
> > I
> > remove these messages?
>
> Yes, if you delete the "state" file named something like bacula-dir.9101.st
Hi,
I had a very simple setup for the last 12 months.
* backup everything to tape and keep the last 2 weeks before
recycling old volumes
* keep the monthly tape(s) for 3 years
I didn't care much about the retention periods of the monthly tapes. I
just set the Volume Retention to 3 years for th
Kern Sibbald schrieb:
> > I created differnt pools for regular backups and long term archival. I
> > think the retention times are reasonable. We are aware that we can't handle
> > a _real_ long time archival (copy to new media, verify...), but we want to
> > keep the volumes for 30 years.
>
> Be
Ralf Gross schrieb:
> But now bacula-dir does not start with the second catalog:
>
> 20-Feb 22:07 bacula-dir: Fatal error: Database not created or server not
> running.
> 20-Feb 22:07 bacula-dir: Fatal error: Could not open Catalog
> "ArchiveCatalog",
> databas
Kern Sibbald schrieb:
> 1. You might want to use two different databases, one for regular backups and
> one for archives. This will clearly separate your archive data from your
> regular data.
Basically this working now. But I'm a bit confused about the handling
of pools and the assigned volume
Kern Sibbald schrieb:
> It is quite possible that Bacula will re-create all the pools the next time
> the Director is restarted.
Indeed. And the pool id's now are different too. Is there any way that I can
prevent bacula to re-create the deleted pools? I'm sure at some point someone
(maybe me) wi
Hi,
I just tested a restore of files with ACL's. The restored file is missing the
ACL's. The file was restored to the same ACL capable filesystem.
org. file:
# getfacl acltest
# file: acltest
# owner: root
# group: root
user::rw-
user:rg:rwx
group::---
mask::rwx
other::---
restored file:
# ge
Mike Hanby schrieb:
> I'm testing out bacula (a newbie) in an environment with Linux and Windows
> XP 64bit systems.
>
> I'm running bacula 2.0.2 with -dir, -fd and -sd on a Linux server, and -fd
> on each of the Windows and other Linux systems. The backups are being stored
> onto a 500 GB hard dr
Ralf Gross schrieb:
>
> I just tested a restore of files with ACL's. The restored file is missing the
> ACL's. The file was restored to the same ACL capable filesystem.
>
> org. file:
>
> # getfacl acltest
>
> # file: acltest
> # owner: root
> # gr
Ralf Gross schrieb:
> Ralf Gross schrieb:
> >
> > I just tested a restore of files with ACL's. The restored file is missing
> > the
> > ACL's. The file was restored to the same ACL capable filesystem.
> >
> > org. file:
> >
> >
Ralf Gross schrieb:
> Ok, I started the client's fd and all bacula daemons on the backup server with
> -d400 and started one more backup.
>
> client's fd:
>
> VU0EM003: find_one.c:210 File : /home/ralfgro/acltest3
> VU0EM003: find_one.c:261 Non-directory incr
Ralf Gross schrieb:
> This is my default FileSet for this client and does not backup ACL's, in
> /server or /home.
>
> FileSet {
> Name = "VU0EM003 Full"
> Include {
> Options {
> aclsupport = yes
> signature = MD5
> }
&
Kern Sibbald schrieb:
> On Sunday 25 February 2007 16:49, Ralf Gross wrote:
> > Ralf Gross schrieb:
> > > This is my default FileSet for this client and does not backup ACL's, in
> > > /server or /home.
> > >
> > > FileSet {
> > >
Alan Davis schrieb:
> Questions for anyone who's currently using secondary catalogs:
>
> I may be making this harder than it needs to be, but I need some
> guidance on just how the second catalog gets used.
>
> I've succeeded in creating the second db and I've added a second
> Catalog entry in
Jonas Wueste schrieb:
> The problem is that bconsole only can be run with root rights.
> I want to transmit the querys result via nrpe to my nagios-server and
> the nrpe user on the local machine has no root privileges.
> So, is there a possibility to get the value without root privileges?
Chang
Alfonso Amato - Sintecnos srl schrieb:
> I agree and your position is true.
>
> Can you tell me what method you have in mind for changing permissions? A
> shell line inside /etc/init.d/bacula-sd.conf (I use Fedora) with the
> chmod previously said or a different command?
If your system supports
Oliver Lehmann schrieb:
> Arno Lehmann wrote:
>
> > Apart from that, you should examine the job 385 in more detail, and
> > compare with 534. I'm quite sure there must be a significant difference
> > - either the job name or the client are not identical, I think.
> >
> > I don't have a running
Hi,
Kern Sibbald schrieb:
> The above *probably* would have written (I am unsure what you really wanted)
> had you written it as:
>
> FileSet {
>Name = "VU0EM003 Full"
>Include {
> File = /
> File = /server
> File = /public
> File = /home
> Options {
>
Martin Simmons schrieb:
> >>>>> On Wed, 28 Feb 2007 16:26:10 +0100, Ralf Gross said:
> >
> > I'm facing a problem with an other FileSet.
> >
> > The following should backup everything in all 000_INS_ARCHIV directories
> > below
> > /se
Christian Nolte schrieb:
> [snip]
> Is it somehow possible to tell bacula to store the full backup which is
> run because no previous full backup has been made into the 'Full' pool
> and not the 'Incremental'?
Yes, you can.
http://www.bacula.org/rel-manual/Configuring_Director.html
FullPool=Fu
Mike Hanby schrieb:
>
> I'm curious how I would set up a schedule to do:
> Full backups on the 1rst Sunday of Jan, Apr, Jul, Oct (i.e. quarterly)
> Differentials on all sundays in between
> incremental on mon-sat
I use this for my schedule.
Schedule {
Name = "Archiv"
Run = Level=Full Pool=Ar
John Drescher schrieb:
> > I'd like to purchase an autoloader to run with bacula. I need to do up
> > to 2tb a night
> 2TB in one night. You may have to get an LTO3 autoloader to do that. I
> hope your have a gigabit link to the data storage. I remember doing a
> 2TB backup in the past but I am su
Jeff Dickens schrieb:
[snip]
> *m
> 16-Mar 21:25 jeff-t40-fd: jeff-t40.2007-03-16_21.24.41 Warning:
> ../../lib/bnet.c:864 Could not connect to Storage daemon on
> packrat:9103. ERR=No error
> Retrying ...
> *
>
> The server just sits there like this:
>
> Running Jobs:
> JobId Level Name
HM schrieb:
>
> If not already requested anywhere, LDAP support would be a sexy feature
> (configuration, job definitions, etc.).
http://www.bacula.org/?page=feature-request
Ralf
-
Take Surveys. Earn Cash. Influence the Fut
[EMAIL PROTECTED] schrieb:
> I already read about that and the "Heartbeat Interval" has already been
> setup and changed to 90 seconds. I have Heartbeat setup on both the SD and
> the FD of this server. I actually had to setup the Heartbeat to handle a
> different problem with the backup. The Heart
Jorge Gonz?lez schrieb:
>
> Bacula it's been tested. I have a script to cleanning database but I
> don't know what is wrong because when I run an 'status all' command in
> console then past jobs are shown.
>
> The script does:
> - Stops daemons
> - drops database
> - creates database & tables
>
Hi,
bacula-dir 2.0.3, bacula-sd 2.0.3, bacula-fd 2.0.2, debian etch amd64,
postgres 8.1.7
Bacula is running fine here for a while. But this weekend bacula
chose to use fresh tape from the scratch pool for job #2 of a diff backup
instead of appending the data to the tape it was writing to a few
mi
Me wrote:
>[snip]
> Job #1:
>
> 08-Apr 00:05 VU0EM005: BeforeJob: run command "/usr/bin/ssh [snip]"
> 08-Apr 00:07 VU0EM005: Start Backup JobId 121,
> Job=SMTCZB0003.2007-04-08_00.05.00
> 08-Apr 00:08 VU0EM005: 3307 Issuing autochanger "unload slot 4, drive 0"
> command.
> 08-Apr 00:09 VU0EM005:
Arno Lehmann schrieb:
> >> [snip]
> >> Job #1:
> >>
> >> 08-Apr 00:05 VU0EM005: BeforeJob: run command "/usr/bin/ssh [snip]"
> >> 08-Apr 00:07 VU0EM005: Start Backup JobId 121,
> >> Job=SMTCZB0003.2007-04-08_00.05.00
> >> 08-Apr 00:08 VU0EM005: 3307 Issuing autochanger "unload slot 4, drive 0"
>
Arno Lehmann schrieb:
> > Well, I've a backup of the bacula database from last weeks full backup
> > (2007-04-01).
> >
> > This shows the same value for voluseduration, 345600 (4 days).
> >
> > COPY media (mediaid, volumename, slot, poolid, mediatype, mediatypeid,
> > labeltype, firstwritten, las
Kern Sibbald schrieb:
> > > At them moment I would consider this as a bug, but I would like to
> > > here Kern's opinion on this before I open a bug report.
> >
> > ... to confirm that assumption and give Kern something to work on.
>
> >From this email, I would probably close the bug report right
Kern Sibbald schrieb:
> > The main question is, why did bacula mark volumes 06D124L3 as used
> > right > after the first job started when the voluseduration is set
> > to 4 days?
>
> I'm not sure that recycling a volume resets its use duration. Perhaps the
> use
> duration expired at about the
Arno Lehmann schrieb:
> > Both jobs have the same start time, but different priorities.
>
> This should meant that effectively only that one job was active. It
> looks something went wrong in the volume selection process, or - ah,
> inspiration! - you did a 'status dir' while the tape was alread
Ralf Gross schrieb:
> > > Both jobs have the same start time, but different priorities.
> >
> > This should meant that effectively only that one job was active. It
> > looks something went wrong in the volume selection process, or - ah,
> > inspiration! - you
Kern Sibbald schrieb:
> On Wednesday 11 April 2007 20:28, Ralf Gross wrote:
> > I'm also confused about this order:
> >
> > 1. run before job
> > 2. start job 121
> > 3. recycle volume 06D124L
> > 4. mark volume 06D124L as used
> > 5. --->
Martin Simmons schrieb:
> >>>>> On Wed, 11 Apr 2007 20:28:48 +0200, Ralf Gross said:
> >
> > Kern Sibbald schrieb:
> > > > The main question is, why did bacula mark volumes 06D124L3 as used
> > > > right > after the first job
Ralf Gross schrieb:
> > Do you know when 06D124L3 was marked as recycled? Look for Director
> > messages
> > like
> >
> > Pruned nnn Jobs on Volume "06D124L3" from catalog.
> > There are no Jobs associated with Volume "06D124L3". Markin
Kern Sibbald schrieb:
> > Of course! If it's a bug I would like to help fix it. If it's a
> > missconfiguration, I would like to find the error.
>
> The way I would proceed if I had the time to work on this would be to setup
> a "dummy" backup, either on a separate machine, or with a different Jo
Arno Lehmann schrieb:
> > I've no idea why none of the volumes in the incr/diff pools were pured until
> > now, there is at least no message about it in the log.
> >
> > So I manually started a differential backup.
> >
> >
> > 12-Apr 14:23 VU0EM005: Start Backup JobId 138,
> > Job=VU0EM003.200
Hi,
bacula-dir 2.0.3, bacula-sd 2.0.3, bacula-fd 2.0.2, debian etch amd64,
postgres 8.1.7
I'm running dbcheck at the moment. The bacula postgres db is 1 GB. dbcheck
needs very long time to check the orphaned Path entries.
Checking for orphaned Path entries. This may take some time!
Found 5472 o
Ralf Gross schrieb:
> bacula-dir 2.0.3, bacula-sd 2.0.3, bacula-fd 2.0.2, debian etch amd64,
> postgres 8.1.7
>
> I'm running dbcheck at the moment. The bacula postgres db is 1 GB. dbcheck
> needs very long time to check the orphaned Path entries.
>
> Checking for o
Kern Sibbald schrieb:
> > Is it possible that dbcheck loops for a much longer time without the
> > modify flag enabled?
>
> Yes, I think there is a bug here. I would appreciate it if you would submit
> a
> bug report ...
I'll open a bug report in the next couple of days. Thanks.
Ralf
---
Dave schrieb:
> I'm getting my Quantum Dlt 4000 going with bacula. I've included my
> definitions below and the job that i'm running. I'm not getting very good
> performance with the spool, the drive starts and stops quite frequently, it
> is on an Adaptec Ultrawide 2940 scsi controller. I w
Dave schrieb:
[pleas always answer to the list]
>Thanks for your reply. My brain is fuzzy, do you use data spooling and
> if so what size value do you have? Do you also use the same tape drive as
> i? If so, does my hardware definition look correct?
I've a LTO-3 drive and have no special har
Jerry Amundson schrieb:
> On 4/16/07, Alan Brown <[EMAIL PROTECTED]> wrote:
> > On Sat, 14 Apr 2007, Kern Sibbald wrote:
> >
> > > This decision is motivated by the fact that the number of emails has
> > > grown to
> > > be quite large, and hence to read them all requires a good deal of time.
> >
Arno Lehmann schrieb:
> > Select function number: 16
> > Checking for Filenames with a trailing slash
> > Found 0 bad Filename records.
> > Checking for Paths without a trailing slash
> > Found 0 bad Path records.
> > Checking for duplicate Filename entries.
> > Found 0 duplicate Filename records.
Kyle Tucker schrieb:
> Today I implemented an all-new backup scheme on my
> 2.0.2 Bacula installation. I ran drop_mysql_tables
> and then make_mysql_tables successfully and my first
> job started at job number 1. But if I run the command
> 'status client=' from bconsole, it has all the old
> jo
Kyle Tucker schrieb:
> On my newly refreshed 2.0.2 Bacula installation,
> I ran fulls on all my clients initially. Last night the
> daily incrementals ran and all clients were upgraded to
> full as Bacula determined their was no previous full in
> the catalog for those clients, despite them a
Jean-François Leroux schrieb:
> I've created several catalogs in my testing setup. I'd like to browse these,
> now but I can't find the command to browse a given catalog only. Isn't it
> possible?
I'm not sure what you mean with 'browse', but you can switch the
catalog in bconsole with the 'use' c
Stern, Falk schrieb:
>
> Is it possible to force upgraded jobs (upgraded from differential to
> full) to a different pool?
Yes, with FullPool, DifferentialPool...
> Currently differential jobs go to disk and full backups should go to
> tape (defined by schedule)
>
> My schedule currently looks
John Drescher schrieb:
> > It purges (deletes) all Files from a Job,
> > JobId, Client or Volume; or it purges (deletes)
> > all Jobs from a Client or Volume without regard
> > for retention periods. Normally you should use the
> > PRUNE command, which respects retention periods.
> > You have the f
Lonny Selinger schrieb:
> I'm sure this has been covered but I can't for the life of me find
> it! ... I had bweb installed before and everything was working
> great. Then I decided to start from scratch and got everything
> installed again ... but now when I go to the list of jobs or click
> the "
Lonny Selinger schrieb:
> - "Ralf Gross" <[EMAIL PROTECTED]> wrote:
> > Lonny Selinger schrieb:
> > > I'm sure this has been covered but I can't for the life of me find
> > > it! ... I had bweb installed before and everything was working
Leonardo Batista schrieb:
>
> i need to make backup every day with 1 week retention but using just 1 DLT
> tape. What the better way to do this with a different volume to each backup?
>
> if a restore is necessary, how mount the tape with a prev. volume?
In bacula, if you are using tapes, one vo
Jamie ffolliott schrieb:
> I have a problem with bacula incorrectly running the schedule, at least as I
> see it, and end up with two jobs getting scheduled for the same time.
> Using bacula 2.0.1. I believe this has persisted as a problem since 1.36,
> and has to do with using the week # in a s
Jamie ffolliott schrieb:
> > What does 'show schedules' show for these two schedules?
>
> For the correct schedule for Elm1, I see this:
>
> --> Pool: name=pool1 PoolType=Backup
> use_cat=1 use_once=0 cat_files=1
> max_vols=0 auto_prune=1 VolRetention=27 days
> VolUse=0 sec
Don MacArthur schrieb:
>
> I've been running bacula for like this for about a year (recently
> upgraded from 1.38.7). I've always started the services manually, but
> now I have other admins working with the system also, and want it to
> autostart at boot.
>
> Symptoms:
> When I try to start t
Jordan Desroches schrieb:
> So it doesn't look like the MySQL process is tanking the system at all. I
> increased cache sizes in MySQL with no effect, along with buffer sizes in
> sysctl.conf . I also tried using SQLite , and got marginally better
> throughput. Has anyone seen significantly >30 MB
Kern Sibbald schrieb:
>
> Currently all the Bacula documents (web site, technotes, manual, manual
> translations, ...) are all in the same SVN repository directory. The result
> is that when it is downloaded, and built to contain the final documents
> needed by most release systems, the tar.gz
Ivan Adzhubey schrieb:
>
> I have Bacula configured to use spooling to disk. I can see a few rather old
> (timestamped from 6 months to 2 years ago) spool files sitting in the
> spooling directory. Can I assume these are leftovers from some crashed backup
> jobs and thus can I safely remove the
Mark Best schrieb:
>
> I'm not sure what term is used to describe the feature but basically the
> backup server only saves 1 copy of a file. Using MD5 it checks to see if
> the file is different if its not it considers it to be the same file and
> doesn't backup multiple copies of the file.
>
>
Ryan Novosielski schrieb:
>
> Could someone tell me where I'm going wrong here? Here is my line that
> I've added to the config files, stolen directly from those who know what
> they're doing:
>
> Alert Command = "sh -c '/opt/csw/sbin/smartctl -H -l error %c'"
Try something like this:
Alert Com
Ryan Novosielski schrieb:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Ralf Gross wrote:
> > Ryan Novosielski schrieb:
> >> Could someone tell me where I'm going wrong here? Here is my line that
> >> I've added to the config files, stolen
Ryan Novosielski schrieb:
> Alert Command = "sh -c '/opt/csw/sbin/smartctl -H -l error %c'"
> >>> Try something like this:
> >>>
> >>> Alert Command = "sh -c 'smartctl -H -d scsi -l error %c'"
> >> I'll certainly give it a shot, but doesn't it look like the %c is never
> >> getting expanded to
Hi,
just for confirmation: if I change the name of a FileSet (not the file
list), the next job will be a full backup?
>From the docs:
Any change to the list of the included files will cause Bacula to automatically
create a new FileSet (defined by the name and an MD5 checksum of the
Include/Exclu
[resent, because of sf problems with the mailing lists]
Hi,
just for confirmation: if I change the name of a FileSet (not the file
list), the next job will be a full backup?
>From the docs:
Any change to the list of the included files will cause Bacula to automatically
create a new FileSet (def
Ralf Gross schrieb:
> [resent, because of sf problems with the mailing lists]
> [...hey, the list is finally working again ;) ]
>
> just for confirmation: if I change the name of a FileSet (not the file
> list), the next job will be a full backup?
The backup was upgraded to full
Maria McKinley schrieb:
> Falk Sauer wrote:
> > please make shure that your changer device has the correct permissions eg.:
> >
> > crw-rw root disk /dev/sg0
> >
> > and for the potentially next problem ...
> > by your tapedrive device i'm unshure, i think this should /dev/nst0, i
> > don't
Lucio Crusca schrieb:
> I'm a newbie, and, believing it was a newbie question, a few days ago I wrote:
> http://sourceforge.net/mailarchive/forum.php?thread_name=200706132220.36816.lucio%40sulweb.org&forum_name=bacula-users
>
> However I've received no reply... ok, I realize this is a mailing list
Lucio Crusca schrieb:
> Ralf Gross wrote:
> > AFAIK there is no direct way to send the data to two storage daemons.
> > This was discussed a couple of times during the last months. Maybe the
> > new migration feature could be helpful.
>
> Thanks for the reply. Can you
Michel Meyers schrieb:
> Jean-François Leroux wrote:
> > Well, sorry, I must have an outdated doc. All I had was :
> > 'If this directive is set to *yes*, any changes you make to the FileSet
> > Include or Exclude lists will be ignored and not cause Bacula to
> > immediately perform a Full backup'
Michel Meyers schrieb:
> >> Maybe we should change the sentence as follows?
> >>
> >> 'If this directive is set to yes, any changes you make to the FileSet
> >> Include or Exclude lists will not cause Bacula to immediately perform a
> >> Full backup.'
> >
> > ...but include new files in the next r
Gabriele Bulfon said:
> How do I know if it is half-duplex or full-duplex?
This link might help you:
http://www.sunmanagers.org/pipermail/summaries/2003-December/004745.html
Ralf
-
Using Tomcat but need to do more? Need to
Hi,
although I'm still using 1.38.5 and never tested 1.39.x I vote for #1.
I know the situation when one makes major changes right before going
on holiday. That's not a very pleasant feeling and it's hard to relax
in this time.
Ralf
--
Ian Leithhead schrieb:
> This seems odd.
>
> Bacula job starts , connects to a remote client (no firewall, etc), and
> storms away transferring data very fast.
>
> Then after some time or volume, it just stops. Packet sniffing indicates
> very light (keep alive?) traffic, but no data transfer.
Todd R Davis schrieb:
> I have recently moved our backup system from one machine running bacula
> 1.34 to another machine running 1.38. All my database conversion seemed to
> go successful. Backups are working fine but when the tape fills and the
> autochanger needs to change tapes I get a message
Hi,
I'm testing bacula 1.39.28 with our new NEC-T40A changer (LTO3 Ultrium
drive). btape's test and fill commands were successful. Only bfill
finished with an error message.
+19-Nov 21:58 btape:
End of Volume "" at 425:8650 on device "NEC-T40A" (/de
Ralf Gross schrieb:
> I'm testing bacula 1.39.28 with our new NEC-T40A changer (LTO3 Ultrium
> drive). btape's test and fill commands were successful. Only bfill
> finished with an error message.
>
> +19-Nov 21:58 btape:
Kern Sibbald said:
> On Wednesday 22 November 2006 08:12, Ralf Gross wrote:
>> Ralf Gross schrieb:
>> > I'm testing bacula 1.39.28 with our new NEC-T40A changer (LTO3
Ultrium
>> > drive). btape's test and fill commands were successful. Only
Kern Sibbald said:
> Well, I have no idea what bfill is. It must be some silly hold over from
> long ago. I just deleted it from the source code.
>
> If "fill" works, you are in good shape. Please ignore the bfill junk ...
Ok, very good.
I did a quick test against 1.38.11 where bfill seems to
christian zimmermann said:
> mount
> The defined Storage resources are:
> 1: File
> 2: Overland
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 0
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issui
Manuel Staechele said:
> how can i get the name of the volume which is in the drive without
> mounting the volume?
> is there a command in the bconsole etc.?
You can use the mtx-changer command for that.
# /opt/bacula/etc/mtx-changer /dev/NEC-T40A list 0 /dev/nst0 0
1:06D120L3
2:06D121L3
3:06D122
Kern Sibbald said:
> On Thursday 04 January 2007 14:23, James Harper wrote:
>> > - Data encryption is now implemented and is documented in
>> > a new chapter of the manual at:
>> > http://www.bacula.org/dev-manual/Bacula_Data_Encryption.html
>>
>> I think that link should be:
>> http://www.bacu
Hi,
I'm trying to compile bacula on debian etch with python support. Debian's
python2.5-dev package is installed an I added
--with-python=/usr/lib/python2.5/
to my configure options.
At the end of configure I get this status output:
Python support: yes -L/usr/include/python2.5//config -lpyt
Martin Simmons schrieb:
> >>>>> On Tue, 16 Jan 2007 11:21:00 +0100, Ralf Gross said:
> >
> > Hi,
> >
> > I'm trying to compile bacula on debian etch with python support. Debian's
> > python2.5-dev package is installed an I added
Martin Simmons schrieb:
> > > > I'm trying to compile bacula on debian etch with python support.
> > > > Debian's
> > > > python2.5-dev package is installed an I added
> > > >
> > > > --with-python=/usr/lib/python2.5/
> > > >
> > > > to my configure options.
> > >
> > > Did you try
> > >
> >
Markus Falb schrieb:
> ...snippel
> Include {
> Options {
> signature=SHA1
> verify = p
> snappel...
>
> i get:
> 17-Jan 03:29 winch-dir: Verifying against JobId=354 Job=IDSarabisch.
> 2007-01-17_02.44.23
> 17-Jan 03:29 w
Hi,
I'm trying to setup bweb 2.0.1. I changed some config settings (paths, db), and
I can access http://myserver/cgi-bin/bweb/bweb.pl, but I get this error message
when accessing the client status or other functions:
[Wed Jan 17 09:25:26 2007] [error] [client x.60.5.110] print() on closed
filehan
Kern Sibbald schrieb:
> I've now installed bweb on a second machine, and have never run into a
> problem
> like you describe. Perhaps Eric will have some idea on this, but one piece
> of advice that I just got from Eric regarding a problem I had is to always
> look in the Apache error_log when
Eric Bollengier schrieb:
>
> > Kern Sibbald schrieb:
> > > I've now installed bweb on a second machine, and have never run into a
> > > problem like you describe. Perhaps Eric will have some idea on this, but
> > > one piece of advice that I just got from Eric regarding a problem I had
> > > is t
Eric Bollengier schrieb:
> > If I then select VU0EM005 add click on 'Status', I immediately get this
> > error again:
> >
> > http://vu0em005/cgi-bin/bweb/bweb.pl?client=VU0EM005&action.x=23&action.y=1
> >9&action=client_status
> >
> > [Fri Jan 19 17:35:01 2007] [error] [client 53.60.5.110] print()
Eric Bollengier schrieb:
> Can you put this into a test.pl file and execute it with the
> www-data user ? (chmod 755 test.pl ; ./test.pl)
>
> ---8<---8<---8<---
> #!/usr/bin/perl -w
> use strict;
> use Bconsole;
> my $
Eric Bollengier schrieb:
> Can you retry the script using
>
> /opt/bacula/sbin/bconsole -n -c /opt/bacula/etc/bconsole.conf
> instead of
> /opt/bacula/etc/bconsole -n -c /opt/bacula/etc/bconsole.conf
>
This works! Ok, this seems to be completely my fault. I'm always using
bconsole in the bacula
Hi,
today I started a backup job and had only one tape in the job's pool. After
some time bacula requested a new tape and I did label and mount a second one
(I'm still testing..)
Then I did a 'status dir' and got this message for a long time.
JobId Level Name Status
===
Gavin Conway schrieb:
> Michel Meyers wrote:
> >>> I'm trying to locate the bacula-web component. It's listed as a feature
> >>> in bacula version 2.0 but it's not showing in the package nor is it
> >>> referenced or linked as a download anywhere on bacula.org .
> >>>
> >>> Any assistance is greatl
Hi,
I'm having trouble with the backup of one of my clients since last week.
29-Jan 17:09 bacula-dir: Start Backup JobId 217,
Job=SMTCZB0003.2007-01-29_17.09.43
29-Jan 17:09 bacula-dir: Recycled volume "MKS3-2006-02-08"
29-Jan 17:09 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
Ralf Gross schrieb:
> 30-Jan 00:37 SMTCZB0003-fd: SMTCZB0003.2007-01-29_17.09.43 Fatal error:
> job.c:1599 Comm error with SD. bad response to Append Data. ERR=Die
> Verbindung wurde vom Kommunikationspartner zur?ckgesetzt
>
> (translation ;) ERR=The connection was reset by th
Hi,
I'm setting up a new bacula server (bacula-dir, bacula-sd) which is
located at our data center. This server is connected to the client lan and
the backup lan with 2 network cards. The backup lan is a subnet that is
not accessible from the client lan. It's only used to backup server that
are lo
Erich Prinz schrieb:
> >> 30-Jan 00:37 SMTCZB0003-fd: SMTCZB0003.2007-01-29_17.09.43 Fatal
> >> error:
> >> job.c:1599 Comm error with SD. bad response to Append Data. ERR=Die
> >> Verbindung wurde vom Kommunikationspartner zur?ckgesetzt
> >>
> >> (translation ;) ERR=The connection was reset by t
1 - 100 of 427 matches
Mail list logo
