christian zimmermann said:
> mount
> The defined Storage resources are:
> 1: File
> 2: Overland
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 0
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3902 Cannot mount Volume on Storage Device "Drive-1" (/dev/st0) because:
> Couldn't rewind device "Drive-1" (/dev/st0): ERR=dev.c:678 Rewind error on
> "Drive-1" (/dev/st0). ERR=No medium found.
>
> 3905 Device "Drive-1" (/dev/st0) open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
>
> I can mount the tape with mtx and label it without a problem I can even
> umount the tape with the bconsole. But I´m not able to mount it.
>
> Can someone point me in the right direction?
> I think I have a config error but not sure.
Did you run the btape tests?
Maybe you have to enabel the offline option in the mtx-changer script.
# enable the following line if you need to eject the cartridge
mt -f $device offline
sleep 10
Ralf
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
