Re: [Bacula-users] Update the bacula-dir.conf file

Hello Rocky, You need to add these 10 clients to Bacula Director configuration (the Client {} resource). After that you need to create new jobs for new clients with specific schedule settings and others. I don't know if there is a best way of doing it. 10 clients is not a big number so maybe you c

[Bacula-users] Update the bacula-dir.conf file

Hi Team, We have deployed the bacula master successfully and now, we have almost installed 10 bacula clients. Can anyone suggest the best way to add these 10 clients in the bacula master bacula-dir.conf file and each job of all servers should execute at different intervals? Thanks Rocky _

Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

Hello, On 6/1/21 05:50, Phil Stracchino wrote: > Actually, there is no point to that DROP INDEX operation, because the > entire table is going to be dropped after its replacement is rebuilt anyway. > > What you can (and probably should) do is find the following two lines: > > DROP INDEX IF EXIST

Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

...@caerllewys.net ; bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!] These errors might cause errors in use: > ERROR 1067 (42000) at line 53: Invalid default value for 'EventsInsertTime' > ERROR 1146 (42S02) a

Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

ntsInsertTime' > ERROR 1146 (42S02) at line 66: Table 'bacula.Events' doesn't exist > Update of Bacula MySQL tables 1021 to 1022 succeeded. > Enter password: > [root@baculaserv bacula]# > > Regards, > Humphrey > > From: Phil Stracchi

Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

7;bacula.Events' doesn't exist Update of Bacula MySQL tables 1021 to 1022 succeeded. Enter password: [root@baculaserv bacula]# Regards, Humphrey From: Phil Stracchino Sent: Monday, May 31, 2021 10:50 PM To: bacula-users@lists.sourceforge.net Subject: Re:

Re: [Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

On 5/31/21 3:22 PM, Humphrey Bryant via Bacula-users wrote: > Hi All, > > I had a perfectly good Bacula 9.6.6 Server and upgraded Bacula 9.6.6 to > the new Bacula 11.03 and now my bacula-dir will not start. 🙁 Also the > database upgrade was not done automatically even though I used > slanesh-Bacul

[Bacula-users] Update of Bacula MySQL tables from 16 to 1017 failed. [Help!]

Hi All, I had a perfectly good Bacula 9.6.6 Server and upgraded Bacula 9.6.6 to the new Bacula 11.03 and now my bacula-dir will not start. 🙁 Also the database upgrade was not done automatically even though I used slanesh-Bacula REPO to do the upgrade. I tried updating the database manually by r

Re: [Bacula-users] Update via rpm repository

Ok thanks for your input, I surely will be looking into it! Best regards, Luca Il giorno mer 27 mag 2020 alle ore 12:10 Per Qvindesland ha scritto: > Hi Luca > > TO be honest I have no idea if it’s the same packages as bacula has on > their site or not, but I been using his repo for a long time

Re: [Bacula-users] Update via rpm repository

Hi Luca Have you tried adding in https://copr-be.cloud.fedoraproject.org/results/slaanesh/Bacula/epel-7-x86_64/ to your repo server? I update all my instances with foreman/katello in this way. Regards Per > On

Re: [Bacula-users] Update via rpm repository

Hi Davide and thanks for chiming in! Configured with redhat satellite just means that we use satellite (a standard for Redhat enterprise) to get software updates but it is the same as configuring bacula repo with yum on a single host. What I’d like to know is: how we can get say from bacula 9.6.3 t

Re: [Bacula-users] Update via rpm repository

Hi Luca, Can you elaborate a bit more what you mean by - configured the repo with red hat satellite Thanks for your feedback Davide On Tue, 26 May 2020 at 15:24, Luca De Rugeriis wrote: > Hi, > does anyone know something about these repos? Or where may I ask? The just > get security updates

Re: [Bacula-users] Update via rpm repository

Hi, does anyone know something about these repos? Or where may I ask? The just get security updates maybe, and I have to change repo manually if I want to upgrade bacula version? Thanks! Luca Il giorno mer 20 mag 2020 alle ore 15:57 Luca De Rugeriis < luca.deruger...@gmail.com> ha scritto: > Hi

[Bacula-users] Update via rpm repository

Hi everyone, my first post here and thanks for the amazing software! I just configured the community repo with Redhat Satellite and migrated to the latest Bacula version. The URL I'm using for the repository contains a specific Bacula version (9.6.3), what I'd like to accomplish is to have the soft

Re: [Bacula-users] Update Tape VolumeName in Bacula

ate: Wednesday, September 14, 2016 at 2:14 PM To: "bacula-users@lists.sourceforge.net" Subject: [Bacula-users] Update Tape VolumeName in Bacula Hello, Please someone could help me with this support: I have problem with the name of the tape loaded in the drive. I mounted the tape LTO60003 but

[Bacula-users] Update Tape VolumeName in Bacula

Hello, Please someone could help me with this support: I have problem with the name of the tape loaded in the drive. I mounted the tape LTO60003 but the bconsole show as the tape LTO60007. Also, I did a a test backup and save the data but with Warning. Please, could help how I can update the fi

[Bacula-users] Update: Bacula btape multivolume fill test help requested

Hello again, Yesterday I posted a message describing how I was having trouble getting bacula 7.4.3's btape fill command to work with an LTO6 tape library. Last night, for fun, I decided to compile bacula 5.2.3. It turns out that btape in bacula 5.2.3 successfully completes the btape fill

Re: [Bacula-users] update slots reports Autochanger has 0 slots

. Dezember 2014 10:02 An: Ana Emília M. Arruda Cc: bacula-users@lists.sourceforge.net Betreff: Re: [Bacula-users] update slots re

Re: [Bacula-users] update slots reports Autochanger has 0 slots

Ana Emília M. Arruda Cc: bacula-users@lists.sourceforge.net Betreff: Re: [Bacula-users] update slots reports Autochanger has 0 slots Hello Ana, What I recently experienced was "Autochanger has 0 slots" error when "AutoChanger = yes" line is missing in Device directive in

Re: [Bacula-users] update slots reports Autochanger has 0 slots

. Arruda" Kime: "Rainer Hackel" Kk: "Süleyman Kuran" , "Can Şirin" , bacula-users@lists.sourceforge.net Gönderilenler: 4 Aralık Perşembe 2014 23:35:37 Konu: Re: [Bacula-users] update slots reports Autochanger has 0 slots Hello Rainer, Can you try chang

Re: [Bacula-users] update slots reports Autochanger has 0 slots

rr...@gmail.com] Gesendet: Donnerstag, 4. Dezember 2014 22:36 An: Rainer Hackel Cc: Süleyman Kuran; Can Şirin; bacula-users@lists.sourceforge.net Betreff: Re: [Bacula-users] update slots reports Autochanger has 0 slots Hello Rainer, Can you try changing Device Name? You have Name and Media Type using t

Re: [Bacula-users] update slots reports Autochanger has 0 slots

f %c |grep TapeAlert|cat'" > > Spool Directory = /data/bacula-spool > > Maximum File Size = 12GB > > Maximum Spool Size = 3200G > > # Maximum Block Size = 200 > > } > > > > Do you have an other idea? > > Rainer > > > &

Re: [Bacula-users] update slots reports Autochanger has 0 slots

mum Block Size = 200 } Do you have an other idea? Rainer Von: Süleyman Kuran [mailto:sku...@ayk.gov.tr] Gesendet: Donnerstag, 4. Dezember 2014 19:23 An: Can Şirin Cc: bacula-users@lists.sourceforge.net Betreff: Re: [Bacula-users] update slots reports Autochanger has 0 slots Merhaba Can,

Re: [Bacula-users] update slots reports Autochanger has 0 slots

Konu: Re: [Bacula-users] update slots reports Autochanger has 0 slots Hi, Check this posts: http://www.freebsddiary.org/tape-library.php http://www.freebsddiary.org/tape-library-integration.php Same issue were discussed before. (http://sourceforge.net/p/bacula/mailman/bacula-users/thread/2013

Re: [Bacula-users] update slots reports Autochanger has 0 slots

Hi, Check this posts: http://www.freebsddiary.org/tape-library.php http://www.freebsddiary.org/tape-library-integration.php Same issue were discussed before. (http://sourceforge.net/p/bacula/mailman/bacula-users/thread/20130306100525.gd22...@nionex.net/) Quoting Rainer Hackel : Hello Bacula

Re: [Bacula-users] update slots reports Autochanger has 0 slots

che...@gmail.com] Gesendet: Donnerstag, 4. Dezember 2014 15:17 An: Rainer Hackel Cc: bacula-users@lists.sourceforge.net Betreff: Re: [Bacula-users] update slots reports Autochanger has 0 slots > But: > > “/usr/libexec/bacula/mtx-changer /dev/changer slots” reports 16 > > > > Of co

Re: [Bacula-users] update slots reports Autochanger has 0 slots

> But: > > “/usr/libexec/bacula/mtx-changer /dev/changer slots” reports 16 > > > > Of course the Autochanger has 16 slots. > > Someone has an idea? > Does user bacula have the permission to run mtx-changer, mtx and access the device node for the autochanger? John ---

[Bacula-users] update slots reports Autochanger has 0 slots

Hello Bacula users, Have some problems with a Quantum SuperLoader 3 LTO-6, and try to break them down in small pieces... here is one: "update slots" command in bconsole says: Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" Automatically selected Storage: Autochanger Connecting

Re: [Bacula-users] Update pools from config files and update every volume

Ha, good catch. And thank you. Jeff. On Aug 22, 2014, at 9:27 AM, Heitor Faria wrote: > I made the following test, changing the Max Volumes and Label Format. And > worked like a charm: > > *list pools > ++-+-+-+--+-+ > | poolid | name|

Re: [Bacula-users] Update pools from config files and update every volume

I made the following test, changing the Max Volumes and Label Format. And worked like a charm: *list pools ++-+-+-+--+-+ | poolid | name| numvols | maxvols | pooltype | labelformat | ++-+-+-+--+

Re: [Bacula-users] Update pools from config files and update every volume

Doesn't Bacula update de Pools every time director daemon is restarted? About the Pools separation, I just do that if I want to have different retentions for its volumes. Cheers, On Fri, Aug 22, 2014 at 8:54 AM, Jeff MacDonald wrote: > Which also makes me wonder if having a separate fill/inc/d

Re: [Bacula-users] Update pools from config files and update every volume

Which also makes me wonder if having a separate fill/inc/diff pool for each and every client is wise… or if it would be wiser to just have a separate full/inc/diff and only 3 pools :) On Aug 21, 2014, at 11:42 PM, Bill Arlofski wrote: > On 08/21/14 21:00, Jeff MacDonald wrote: >> Is there a t

Re: [Bacula-users] Update pools from config files and update every volume

I understand doing one at a time… but in my case I have 40 pools and thats tedious. So was looking for a short cut. Jeff. On Aug 21, 2014, at 11:42 PM, Bill Arlofski wrote: > On 08/21/14 21:00, Jeff MacDonald wrote: >> Is there a trick anyone has worked out to update every single pool to match

Re: [Bacula-users] Update pools from config files and update every volume

On 08/21/14 21:00, Jeff MacDonald wrote: > Is there a trick anyone has worked out to update every single pool to match > the config files and then to have every volune update from every pool > definition? > > I just did some major reconfiguring and don’t want to do it one by one. > > > Jeff. >

Re: [Bacula-users] Update pools from config files and update every volume

> > Is there a trick anyone has worked out to update every single pool to > match the config files and then to have every volune update from every pool > definition? > > I just did some major reconfiguring and don’t want to do it one by one. > Hi Jeff: did you try the update command, volume parame

[Bacula-users] Update pools from config files and update every volume

Is there a trick anyone has worked out to update every single pool to match the config files and then to have every volune update from every pool definition? I just did some major reconfiguring and don’t want to do it one by one. Jeff. -

Re: [Bacula-users] Update command syntax

On 06/11/2014 08:18 PM, Larry A. Rosen wrote: > Is there a way to do "update all volumes from pool" specifying the pool > without being prompted to use the menu to select the operation? > > i.e. I want to update the retention period of all volumes in the Archive > pool so I'd like to do somethin

[Bacula-users] Update command syntax

Is there a way to do "update all volumes from pool" specifying the pool without being prompted to use the menu to select the operation? i.e. I want to update the retention period of all volumes in the Archive pool so I'd like to do something like this: update all volumes from pool po

Re: [Bacula-users] ``Update all volumes from pool'' does not work?

On Fri, Feb 7, 2014 at 8:34 AM, Andreas Koch wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Hi all, > > I need to update all volumes in a pool with new data (specifically, set > maxvoljobs to a new value). > > I changed the pool definition in the director config file, reread the conf

[Bacula-users] ``Update all volumes from pool'' does not work?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, I need to update all volumes in a pool with new data (specifically, set maxvoljobs to a new value). I changed the pool definition in the director config file, reread the config file and did an update pool. The pool resource is indeed updated.

Re: [Bacula-users] UPDATE - ERROR Spooling/Backups with large amounts of data from windows server 2012

Zitat von Hans Thueminger : > Dear Bacula Users! > > After another two months of testing I'm able to make an update: > > Hans Thueminger wrote, On 20.11.2013 16:58: >> Dear Bacula Users! >> >> I'm a newbie and have been trying to configure a Bacula backup >> solution for our Institute for two m

Re: [Bacula-users] update a Bacula MySQL database from version 12 to 14

On 06/13/13 11:59, mailing wrote: > Hi, > > > we have Upgrade Debian Squeeze to Debian Wheezy. > > Then we want Upgrade the Database Version 12 to 14. > > //usr/share/bacula-director/update_mysql_tables -u root -p > > This script will update a Bacula MySQL database from version 12 to 14 > wh

[Bacula-users] update a Bacula MySQL database from version 12 to 14

Hi, we have Upgrade Debian Squeeze to Debian Wheezy. Then we want Upgrade the Database Version 12 to 14. /usr/share/bacula-director/update_mysql_tables -u root -p   This script will update a Bacula MySQL database from version 12 to 14

Re: [Bacula-users] update slots scan question

On Fri, Feb 08, 2013 at 09:40:28AM -0500, Dan Langille wrote: > On 2013-02-08 05:17, Uwe Schuerkamp wrote: > I take it that your tape library does not read barcodes? Or that you > are not > using barcodes. Which is it? Hi Dan, thanks much for your answer. Our library is unable to read barcode

Re: [Bacula-users] update slots scan question

On 2013-02-08 05:17, Uwe Schuerkamp wrote: > Hi folks, > > I'm about to use the "update slots scan" bconsole command for the > first time as I'm fed up with doing all the manual work changing a > set > of tapes involves. I take it that your tape library does not read barcodes? Or that you are n

[Bacula-users] update slots scan question

Hi folks, I'm about to use the "update slots scan" bconsole command for the first time as I'm fed up with doing all the manual work changing a set of tapes involves. In a perfect (bacula) world, this command would achieve the following: - load all tapes in the changer one after the other -

Re: [Bacula-users] Update volume parameters on multiple volumes

h the pool name, or replace everything in the () with the poolid -Original Message- From: LasseKongo [mailto:bacula-fo...@backupcentral.com] Sent: Wednesday, February 29, 2012 12:42 PM To: bacula-users@lists.sourceforge.net Subject: [Bacula-users] Update volume parameters on multip

Re: [Bacula-users] Update volume parameters on multiple volumes

On Wed, Feb 29, 2012 at 4:00 PM, John Drescher wrote: > On Wed, Feb 29, 2012 at 3:41 PM, LasseKongo > wrote: >> Is there a way to update parameters on multiple volumes in a pool with one >> command? >> >> In my case I want to change the recycle flag from yes to no for all volumes >> in one >> o

Re: [Bacula-users] Update volume parameters on multiple volumes

On Wed, Feb 29, 2012 at 3:41 PM, LasseKongo wrote: > Is there a way to update parameters on multiple volumes in a pool with one > command? > > In my case I want to change the recycle flag from yes to no for all volumes > in one > of my pools, but I have so far only been able to change one volume

[Bacula-users] Update volume parameters on multiple volumes

Is there a way to update parameters on multiple volumes in a pool with one command? In my case I want to change the recycle flag from yes to no for all volumes in one of my pools, but I have so far only been able to change one volume at a time with bconsole. I guess there is a more clever way t

[Bacula-users] update slots scan after replacing autochanger

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, I'm running Bacula 5.0.0-9.el6 from the CentOS 6 base repository. My 24 slot autochanger with barcode reader died on me, and in order to keep backups going I replaced it with a spare unit that has only 8 slots and no barcode reader. After the

[Bacula-users] Update Re: HP 718 Autochanger Configuration

terryc wrote: > 2. Mixed luck on the /etc/bacula/mtx-changer tests. Specifically problem > is this one; > .. > damselfly:/etc/bacula# /etc/bacula//mtx-changer /dev/sg1 transfer 5 1 > usage: mtx-changer ctl-device command [slo

[Bacula-users] update command made all my tapes show as non-present in jukebox

I'm new to Bacula. I got it configured and ran a backup and that worked OK after some playing. I removed some of the tapes from my jukebox and I I'm going to relabel some of the ones that I didn't pull out as incrementals, since they weren't used in the full backup. After removing some of the ta

Re: [Bacula-users] update slots scan

On 27.05.2011 14:03, John Drescher wrote: > On Fri, May 27, 2011 at 7:51 AM, Andre Lorenz wrote: >> On 27.05.2011 09:41, Mauro Colorio wrote: >>> what's the result of tapeinfo -f /dev/sg6 ? >>> >>> ciao >>> Mauro >> i changed something ;-) >> reconfigured some stuff but noc change :-( >> >> lsscsi

Re: [Bacula-users] update slots scan

On Fri, May 27, 2011 at 8:00 AM, Andre Lorenz wrote: > > mtx -f /dev/sg5 unload 11 0 > Unloading drive 0 into Storage Element 11...mtx: Request Sense: Long > Report=yes > mtx: Request Sense: Valid Residual=no > mtx: Request Sense: Error Code=70 (Current) > mtx: Request Sense: Sense Key=Illegal Req

Re: [Bacula-users] update slots scan

On Fri, May 27, 2011 at 7:51 AM, Andre Lorenz wrote: > > On 27.05.2011 09:41, Mauro Colorio wrote: >> what's the result of tapeinfo -f /dev/sg6 ? >> >> ciao >> Mauro > i changed something ;-) > reconfigured some stuff but noc change :-( > > lsscsi -g > ... > [1:0:0:0]    mediumx NEC      LL0101H-0

Re: [Bacula-users] update slots scan

mtx -f /dev/sg5 unload 11 0 Unloading drive 0 into Storage Element 11...mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Illegal Request mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx

Re: [Bacula-users] update slots scan

On 27.05.2011 09:41, Mauro Colorio wrote: > what's the result of tapeinfo -f /dev/sg6 ? > > ciao > Mauro i changed something ;-) reconfigured some stuff but noc change :-( lsscsi -g ... [1:0:0:0]mediumx NEC LL0101H-0A 0002 /dev/sch0 /dev/sg2 [1:0:1:0]tapeIBM ULTRIUM-

Re: [Bacula-users] update slots scan

> lsscsi -g > ... > [1:0:0:0]    mediumx NEC      LL0101H-0A       0002  /dev/sch0  /dev/sg2 > [1:0:1:0]    tape    IBM      ULTRIUM-TD2      38D0  /dev/st0  /dev/sg3 > > [2:0:0:0]    tape    IBM      ULTRIUM-TD4      7A31  /dev/st1 > /dev/sg4      <- Drive 1 > [2:0:0:1]    mediumx NEC      T4

Re: [Bacula-users] update slots scan

Hi, i just got it back half working :-( dmesg | grep 2:0:1:1 [ 79.677949] scsi 2:0:1:1: Medium ChangerNEC T40A2 0005 PQ: 0 ANSI: 2 [ 80.449402] ch 2:0:1:1: Attached scsi changer ch1 [ 80.449402] ch 2:0:1:1: Attached scsi generic sg6 type 8 [13387.819021] scsi 2:0:1:1: Med

Re: [Bacula-users] update slots scan

try this dmesg | grep 2:0:1:1 it will tell you the name of the device where the loaders is attached (sg3 in my case) then mtx -f /dev/sg3 status if it works check ur config files Mauro -- vRanger cuts backup time in h

Re: [Bacula-users] update slots scan

On Wed, May 25, 2011 at 10:27 AM, Andre Lorenz wrote: > Hello together, > > i have a NEC-LTO4  (FC) 40 slots changer, and 8 slot LTO2 (8 Slots) > changer (SCSI). > > this one was working perfectly. > > after physical move of the changers and servers i cant run anymore > update slots scan on the LT

[Bacula-users] update slots scan

Hello together, i have a NEC-LTO4 (FC) 40 slots changer, and 8 slot LTO2 (8 Slots) changer (SCSI). this one was working perfectly. after physical move of the changers and servers i cant run anymore update slots scan on the LTO4 :-( on the old LTO2 i can run it without any problems. lsscsi will

Re: [Bacula-users] update bacula

./configure make make install ??? I think i read somewhere in the docs that it would not replace your conf files. The only thing you need to check out is the database part, it should be in the docs. Thanks -- Romer Ventura On Aug 17, 2010, at 2:38 PM, nizam wrote: Hi All, I have in

[Bacula-users] update bacula

Hi All, I have in the server bacula version 2.0.2. Does anybody know how to update to 5.03 which is the current version Regards, Nizam +-- |This was sent by nizam.ahm...@gmail.com via Backup Central. |Forward SPAM to ab...@bac

Re: [Bacula-users] Update Bacula from 2.4.4 to 5.0.2

Hi, I did this exact same upgrade last week and it went very smoothly for me (despite moving the database and director to a different server that runs a different instruction set/architecture. Notes inline below. On 07/07/2010 20:15, Dan Langille wrote: > On 7/7/2010 1:40 PM, Stefan Schwarz wro

Re: [Bacula-users] Update Bacula from 2.4.4 to 5.0.2

On 7/7/2010 1:40 PM, Stefan Schwarz wrote: > What are the steps to make this big update without loosing the old data > (on Debian-Lenny)? I would add: - backup *.conf files - dump bacula database to text file I can't comment on the rest: I don't use Debian. > - Install new 5.02 packages from de

[Bacula-users] Update Bacula from 2.4.4 to 5.0.2

What are the steps to make this big update without loosing the old data (on Debian-Lenny)? - Install new 5.02 packages from debian-testing (backports) - Update all fd to at least 3.x-versions - Update database with update-script to newer format (where do i find it and does this script upgrade dir

[Bacula-users] Update Volume=%v not working in script (5.0.1)

Hi all, I'm attempting to mark a volume as used at the end of a backup. The job has RunScript { RunsWhen=After console= "update volume=%v volstatus=used" } The %v doesn't seem to have a value. The result is shell command: run ClientAfterJob "update volume= volstatus=used" Any

[Bacula-users] Update of bacula 3.0.3 -> 5.0.1 sqlite3 failure

I'm working on updating my v3.0.3 to 5.0.1 code base here. I'm running under ubuntu 8.04 LTS server (64bit) and running sqlite3. bacula is manually compiled. The new version of code compiles fine w/ shared libraries (ran into a problem w/ static & the tools but will look at that later). Anyway

Re: [Bacula-users] "update slots scan" gets "ERR=Unknown error during program execvp"

Hello :-) The issue seems to be with vchanger 0.8.5 and auto-mounting; it may be specific to Slackware 13.0. After disabling auto-mounting, manually mounting the USB HDD and reconfiguring Bacula sd to suit, the "label barcodes" command worked. Best Charles -Original Message- From:

[Bacula-users] "update slots scan" gets "ERR=Unknown error during program execvp"

Hello :-) This cross-posted from the vchanger mailing list because the problem cause may be in either bacula-sd or vchanger -- or both, or neither if it's my error as is most likley :-) I'm setting up bacula 5.0.1 with vchanger 0.85 following the (very good, thanks) procedure in vchangerHowto.

[Bacula-users] Update from 1.3.x to 3.x

hello list what steps are involved to update from 1.3.x to recent 3.x on a debian maschine-- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and

Re: [Bacula-users] Update retention of all volumes

On Mon, Feb 2, 2009 at 1:27 AM, J. Pablo Fernández wrote: > Hello, > > How can I update the retention period, from the configuration file, of > all volumes without having to do it volume by volume? > The configuration file update only applies to new volumes. However you can undate the config file

Re: [Bacula-users] Update retention of all volumes

o: bacula-users@lists.sourceforge.net Sent: Feb 2, 2009 1:27 AM Subject: [Bacula-users] Update retention of all volumes Hello, How can I update the retention period, from the configuration file, of all volumes without having to do it volume by volume? Thanks. - -- J. Pablo Fernández (ht

[Bacula-users] Update retention of all volumes

Hello, How can I update the retention period, from the configuration file, of all volumes without having to do it volume by volume? Thanks. -- J. Pablo Fernández (http://pupeno.com) -- This SF.net email is sponsored by

Re: [Bacula-users] update slots doesn't handle removed volumes

Robert Horton wrote: > Hi, > > I've noticed that running "update slots" marks as added any volumes > which have been added to the autochanger but doesn't mark as removed any > which have been removed. Here's a sample output: > > *update slots > Automatically selected Storage: Autochanger > Connec

[Bacula-users] update slots doesn't handle removed volumes

Hi, I've noticed that running "update slots" marks as added any volumes which have been added to the autochanger but doesn't mark as removed any which have been removed. Here's a sample output: *update slots Automatically selected Storage: Autochanger Connecting to Storage daemon Autochanger at f

Re: [Bacula-users] Update slots

Ok, so I can use "update slots" on an autochanger where barcode reader and barcode labels are available; whenever the former or the latter is missing I had to launch a full inventory of the library with "update slots scan". I guess the best practice is to label all the available volumes and then r

Re: [Bacula-users] Update slots

Hi, 15.12.2008 17:34, John Drescher wrote: >> Opening the mtx-changer script (bacula 2.2.6).. >> .. >> # list list Volume names (requires barcode reader) <- I >> don't have one..is it necessary? >> .. > It's not necessary but in this case bacula has to read every single > tape t

Re: [Bacula-users] Update slots

> Opening the mtx-changer script (bacula 2.2.6).. > .. > # list list Volume names (requires barcode reader) <- I > don't have one..is it necessary? > .. It's not necessary but in this case bacula has to read every single tape to determine the tapes label and update the database.

Re: [Bacula-users] Update slots

t 20:Empty   Storage Element 21:Full   Storage Element 22:Full   Storage Element 23:Full   Storage Element 24:Full Thanks, Massimo - Original Message - From: John Drescher Date: Sunday, December 14, 2008 8:59 pm Subject: Re: [Bacula-users] Update slots To: Massimo Scheno

Re: [Bacula-users] Update slots

On Sun, Dec 14, 2008 at 2:24 PM, Massimo Schenone wrote: > Hi all, > when I get an unexpected behaviour when using the command update slots: > > *update slots > Automatically selected Storage: SunSTK-C2 > Connecting to Storage daemon SunSTK-C2 at splinter:9103 ... > Connecting to Storage daemon Su

[Bacula-users] Update slots

Hi all, when I get an unexpected behaviour when using the command update slots: *update slots Automatically selected Storage: SunSTK-C2 Connecting to Storage daemon SunSTK-C2 at splinter:9103 ... Connecting to Storage daemon SunSTK-C2 at splinter:9103 ... 3306 Issuing autochanger "slots" command.

[Bacula-users] update slots question

This is probably well documented somewhere and I can't just find it. real quick. When I run 'update slots barcode' on my debian bacula director the tape drive ejects puts the tape back into its original slot and then scans all autochanger slots. When I run 'update slots barcode' on my win3

[Bacula-users] Update Bacula Manual Page 522 ???

Hi all, I found the following text inside of the manual: snipet If you would like to know what options you have set before making any of the changes noted above, you can now view them on Linux systems, thanks to a tip provided by Willem Riede. Do the following: become super user mt -f /de

Re: [Bacula-users] Update slots causes bacula console to prompt for drive, etc?

Bob Hetzel wrote: >> => *update slots >> => Automatically selected Storage: Dell-PV136T >> => Enter autochanger drive[0]: 0 >> => Connecting to Storage daemon Dell-PV136T at gyrus:9103 ... >> => 3306 Issuing autochanger "slots" command. >> => Device "Dell-PV136T" has 0 slots. >> => No slots in cha

Re: [Bacula-users] Update slots causes bacula console to prompt for drive, etc?

> Date: Wed, 27 Feb 2008 10:17:05 -0500 > From: [EMAIL PROTECTED] > > In the message dated: Tue, 26 Feb 2008 19:12:38 EST, > The pithy ruminations from Bob Hetzel on > <[Bacula-users] Update slots causes bacula console to prompt for drive, etc?> > w > ere: &

Re: [Bacula-users] Update slots causes bacula console to prompt for drive, etc?

In the message dated: Tue, 26 Feb 2008 19:12:38 EST, The pithy ruminations from Bob Hetzel on <[Bacula-users] Update slots causes bacula console to prompt for drive, etc?> w ere: => I just noticed this oddity. Perhaps it's how I've got bacula And which version of b

Re: [Bacula-users] Update slots causes bacula console to prompt for drive, etc?

On Tue, Feb 26, 2008 at 7:12 PM, Bob Hetzel <[EMAIL PROTECTED]> wrote: > I just noticed this oddity. Perhaps it's how I've got bacula > configured, but it otherwise seems to work properly. I've got an > autochanger with 72 slots and two tape drives. I just added some new > tapes in and did th

[Bacula-users] Update slots causes bacula console to prompt for drive, etc?

I just noticed this oddity. Perhaps it's how I've got bacula configured, but it otherwise seems to work properly. I've got an autochanger with 72 slots and two tape drives. I just added some new tapes in and did the following... *update slots Automatically selected Storage: Dell-PV136T Enter

Re: [Bacula-users] Update on help: Tape Writing speed in bacula for LTO -3:

19.02.2008 10:20, Rathinasamy, Bhaskaran (ext) wrote: > > Hello Arno, > > Many thanks for your reply. > > The below is the output of backup scheduled with default bacula directory in > local machine. > > This is without spooling. > > 18-Feb 16:21 bw1lib1-dir JobId 17: Start Backup JobId 1

Re: [Bacula-users] update to 2.2.6: Job X wants Pool="X" but have Pool="Y"

Rudolph Bott wrote: > Mattias Twedmark wrote: > >> Hi Rudolph, >> >> I spent two days recently with the exact same problem trying to use one >> storage and on device for multiple clients and jobs. My conclusion was >> that the Storage Device can only keep one pool open at a time and >> theref

Re: [Bacula-users] update to 2.2.6: Job X wants Pool="X" but have Pool="Y"

r day/pool? That would be a nightmare to maintain - right now adding a new client is only a matter of copy/paste of the client- and the job-definition.. > > /M > > -Ursprungligt meddelande- > Från: Rudolph Bott [mailto:[EMAIL PROTECTED] > Skickat: den 23 januari 2008 11

Re: [Bacula-users] update to 2.2.6: Job X wants Pool="X" but have Pool="Y"

6 Till: bacula-users@lists.sourceforge.net Ämne: [Bacula-users] update to 2.2.6: Job X wants Pool="X" but have Pool="Y" Hey list, on monday I updated to bacula 2.2.6 (from 1.3.38) and started off with a clean database. Apparently I didn't have to change a thing and was able to us

[Bacula-users] update to 2.2.6: Job X wants Pool="X" but have Pool="Y"

Hey list, on monday I updated to bacula 2.2.6 (from 1.3.38) and started off with a clean database. Apparently I didn't have to change a thing and was able to use the old config (~15-20 clients with nightly backups to File Storage). Everything went fine on Monday (using the Pool "Monday"), but y

Re: [Bacula-users] Update from 1.38.11

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Arunav Mandal wrote: > I am planning to update our Bacula installation from 1.38.11 to the > latest version so do I need to recreate the Mysql database? Also do I > need to update all clients to the latest version as well? No, not recreate, but you do

[Bacula-users] Update from 1.38.11

I am planning to update our Bacula installation from 1.38.11 to the latest version so do I need to recreate the Mysql database? Also do I need to update all clients to the latest version as well? Arunav. - Check out th

Re: [Bacula-users] update slots from manual fails

On Wed, Dec 12, 2007 at 11:12:17AM -0500, John Drescher wrote: > > *update slots > > The defined Storage resources are: > > 1: LTO4 > > 2: File > > Select Storage resource (1-2): 1 > > Connecting to Storage daemon LTO4 at molbio:9103 ... > > 3306 Issuing autochanger "slots" command. > > D

Re: [Bacula-users] update slots from manual fails

On Wed, Dec 12, 2007 at 11:12:17AM -0500, John Drescher wrote: > > unmount > > (remove magazine) > > (insert new magazine) > > update slots > > mount > > > > however, when i run update slots i get this: > > > > *update slots > > The defined Storage resources are: > > 1: LTO4 > > 2: File >

  1   2   >