Hello together, i have a NEC-LTO4 (FC) 40 slots changer, and 8 slot LTO2 (8 Slots) changer (SCSI).
this one was working perfectly. after physical move of the changers and servers i cant run anymore update slots scan on the LTO4 :-( on the old LTO2 i can run it without any problems. lsscsi will show both both devices. [1:0:0:0] mediumx NEC LL0101H-0A 0002 /dev/sch0 [1:0:1:0] tape IBM ULTRIUM-TD2 38D0 /dev/st0 [2:0:0:0] tape IBM ULTRIUM-TD4 7A31 /dev/st1 [2:0:1:0] tape IBM ULTRIUM-TD4 7A31 /dev/st2 [2:0:1:1] mediumx NEC T40A2 0005 /dev/sch1 i also checked config if device-name changed, .... on the lto2 the command runs without any problems. on the LTO4 i am getting following msg: Connecting to Storage daemon NEC-LTO4 at frabackup01:9103 ... 3306 Issuing autochanger "slots" command. Device "ULTRIUM-TD4-1" has 0 slots. No slots in changer to scan. i also rebooted / restarted changer, server,services ........... there is also no output inside logs. now is there somebody with an idea? thanks in advance andre ------------------------------------------------------------------------------ vRanger cuts backup time in half-while increasing security. With the market-leading solution for virtual backup and recovery, you get blazing-fast, flexible, and affordable data protection. Download your free trial now. http://p.sf.net/sfu/quest-d2dcopy1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
