@Win Htin:
You are definitely on the money with your suggested change to bacula-sd.conf
and your mt commands to set the driver options. I was getting errors like
these with my Tandberg SLR7 whenever I tried to append to a tape which had been
mounted while the system rebooted:-
16-May 23:22 ba
Hello !
Well, I'm since months now on that project, but nevertheless I like
bacula and I agree that it's hardware issues that I'm experiencing.
I have the same settings as you on the library. But I noticed a weird
thing : the library stops responding to the Web Access after a few days
uptime,
;;
HTH,
Win
> Message: 21
> Date: Tue, 12 May 2009 14:36:42 +0200
> From: yvan
> Subject: Re: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM >
> TS3100)
> Cc: bacula-users@lists.sourceforge.net
> Message-ID: <4a096d5a.6030...@skywalker.is-a-chef.com>
ape JobId 0: 3304 Issuing autochanger "load slot 2, drive 0"
>>> command. 05-May 19:04 btape JobId 0: 3305 Autochanger "load slot 2, drive
>>> 0", status is OK. 05-May 19:04 btape: Fatal Error at dev.c:1705 because:
>>> dev.c:1704 Attempt to WEOF on non-appe
: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM > TS3100)
It might help to update your firmware if it is not current.
While setting up Bacula for the first time with RHEL 5.2 and the TL2000 I ran
btape and then cap which showed the tape
load slot 1, drive 0" command. 05-May 19:05 btape JobId 0: 3305
> > Autochanger "load slot 1, drive 0", status is OK. 05-May 19:05 btape
> > JobId 0: Ready to read from volume "TestVolume1" on device "Drive-1"
> > (/dev/nst0). Rewinding.
> > Re
rds from 0:0.
> 1 records read now at 1:5084
> Reposition from 1:5084 to 1226:13009
> Reading block 13009.
>
> The last block of the first tape matches.
>
> 05-May 19:06 btape JobId 0: 3307 Issuing autochanger "unload slot 1, drive 0"
> command.
> 05-May 19:07 btape
PM
To: Hayden Katzenellenbogen
Cc: yvan; bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM > TS3100)
If "mtx" is working from command line, cut and paste the following
perl script, changing parameters where necessary. That will help
00 records read now at 1:5084
> Reposition from 1:5084 to 1226:13009
> Reading block 13009.
>
> The last block of the first tape matches.
>
> 05-May 19:06 btape JobId 0: 3307 Issuing autochanger "unload slot 1, drive 0"
> command.
> 05-May 19:07 btape JobId 0: 33
end first to completely erase the tape(s), run "btape"
> to make sure everything is working fine and then start testing the
> actual backups. Capture the output while running "btape" and go
> through it line by line to make sure you don't have even a single
On Thu, May 7, 2009 at 9:30 AM, John Drescher wrote:
> On Thu, May 7, 2009 at 9:14 AM, yvan wrote:
>> Hi !
>>
>> Yes, doing that at the moment. It takes a long time to reset all my
>> tapes, erase them, and start some tests on them it takes days ...
>> More to come soon ...
>>
>> By the way,
one.
05-May 15:17 btape: Fatal Error at dev.c:1705 because:
dev.c:1704 Attempt to WEOF on non-appendable Volume
Thanks
H
-Original Message-
From: yvan [mailto:y...@skywalker.is-a-chef.com]
Sent: Monday, May 04, 2009 4:14 AM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-use
orgot to mention I'm running Bacula version 2.2.6 on RHEL4 and
> 2.4.3 on RHEL5.2.
>
> HTH,
> Win
>
>
>> Message: 7
>> Date: Mon, 04 May 2009 13:13:45 +0200
>> From: yvan
>> Subject: Re: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM
>>
ine to make sure you don't have even a single
error.
BTW, I forgot to mention I'm running Bacula version 2.2.6 on RHEL4 and
2.4.3 on RHEL5.2.
HTH,
Win
> Message: 7
> Date: Mon, 04 May 2009 13:13:45 +0200
> From: yvan
> Subject: Re: [Bacula-users] Tape MTEOM error with Dell
Hi,
thank you for the advices. We have very similar configurations, and I'm
sure I'm not too far from the solution. I tried to use your settings in
the storage daemon config file, and the "mt" options as well, than I
didn't try so far.
But, as soon as I put those settings, I have another error
> Message: 3
> Date: Thu, 30 Apr 2009 16:47:46 +0200
> From: yvan
> Subject: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM TS3100)
> To: bacula-users@lists.sourceforge.net
> Message-ID: <49f9ba12.2070...@skywalker.is-a-chef.com>
> Content-Type: text/plain;
Hello,
thank you for your help. I've seen your post googling for my problem,
but I don't think it's a reboot problem of the autochanger here, because
I didn't reboot the autochanger since weeks, and I put 10 new tapes into
it, that all turn out with this MTEOM problem as soon I put a 2nd backup
Hi the list !
I need your help !
I'm trying to setup bacula working with our Dell Autochanger TL2000 (24
slots, 1 drive), and I have pretty serious problems that drive me mad. I
can't tell the many hours I spent on that project.
The issue is that bacula has trouble appending to tape if it has alr
18 matches
Mail list logo
