Marco wrote:
Joshua Kugler wrote:
I believe there is a Backup user or group that allows you to backup files
that are encrypted. You might check that out.
Joshua,
thanks for the hint. But unfortunately there is no backup user under WinXP Pro.
There is a group named "Backup Operators" Any
Marco wrote:
Hi,
I am trying to install Bacula on Debian Sarge.
compiled and installed sqlite-2.8.16kes
compiled and installed bacula-1.38.5
But after starting bacula-dir I get the following error:
/usr/sbin/bacula-dir: error while loading shared libraries: libsqlite.so.0:
cannot open shared o
On Fri, 13 Jan 2006 - 9:35am, Thomas Simmons wrote:
Hello,
I just realized that bacula is recycling previously written tapes before taking
any from the scratch pool. My pool directives are below. With this setup, I
would think that bacula *could* overwrite any tape after four weeks, but
Hello,
I just realized that bacula is recycling previously written tapes before taking any from the scratch pool. My
pool directives are below. With this setup, I would think that bacula *could* overwrite any tape after four
weeks, but shouldn't if any are available in the scratch pool. Unfortun
Two questions, actually...
We are very impressed with Bacula and use it in several locations. Hope
I put these questions in the correct mailing list.
Has the Director been built for Windows or Cygwin? Our machines are
Windows based and behind firewalls. Since we are using Bacula for
remot
Richard W. Knight wrote:
Thomas,
Thanks for your reply. In my last post I said I was using pmfirewall.
Scratch that. I switched to iptables a few years ago. Anyway,
Thomas Simmons wrote:
Dave,
Thanks for the reply. I'm running pmfirewall on an RH7 box. It also
does my routing
Dave,
Thanks for the reply. I'm running pmfirewall on an RH7 box. It also does
my routing.
I removed the block from public 192.168.n.n but I still could not see
the private server from the public. I set this up so long ago, I've
forgotten a lot of the configs so I guess I need to do some sno
[EMAIL PROTECTED] wrote:
Good eye Matt, but that was a just a typo in the email.
I did wonder if it was :-)
After doing some math I noticed that the volume retention period was one
year for all of my tapes, even though it was set to four weeks in the pool
resource. I purged a tape and relab
[EMAIL PROTECTED] wrote:
Hi Thomas,
I think you're missing an =. Should be "Volume Retention = 4 weeks"
Also try "Recycle Current Volume = yes". Bacula will use whichever volume is
mounted, but obeys the retention periods.
Hope this helps,
Matt
Good eye Matt, but that was a just a typo in
All tapes in my library are now filled and I expected bacula to grab a previous tape and overwrite it, but
that didn't happen. Sometime last night the backups just stopped while bacula waited for me to label a tape.
Here is my pool resource.
Pool {
Name = Full-Pool
Recycle = yes
AutoPrune = yes
Arno Lehmann wrote:
Hello,
On 15.09.2005 23:08, Maria McKinley wrote:
Could someone tell me what the file /etc/bacula/bacula_flavor is
suppose to contain? I am getting the message:
15-Sep 01:20 billie-dir: RunBefore: cat: /etc/bacula/bacula_flavor: No
such file or directory
15-Sep 01:20 bi
Arno Lehmann wrote:
Hi all,
as I've seen some error reports with the message given in the subject
line and I'm having some trouble with this myself I think it's useful to
collect some more specific data concerning this special error.
There are some current threads discussing this problem, an
Arunav Mandal wrote:
We have 150 clients to backup everynight and I am using 1TB as spool. All
setup is on linux. I can see now only one client is doing backups at any
given time. How can I do multiple backups at same time.
Do you have "Maximum Concurrent Jobs" set?. In bacula-dir.conf this
n
Arno Lehmann wrote:
Hello,
Thomas Simmons wrote:
Looks like I found another problem with 1.37.37. It seems I can't
cancel jobs.
status dir shows:
Running Jobs:
JobId Level Name Status
==
122
Upgrade to 1.37.37. I don't know about the first problem, but the
second is fixed according to my tests and user feedback in version
1.37.37.
I upgraded to 1.37.37, but tonight the same failures occured. The first
night (full backups), this didn't happen, which is when I would think a
timeo
Kern Sibbald wrote:
On Tuesday 30 August 2005 14:44, Thomas Simmons wrote:
Last night five clients failed with the following error. These are
clients that were successfully backed up Friday, with no change to any
configs.
29-Aug 20:47 sioux-dir: auriga.2005-08-29_20.00.29 Fatal error
Last night five clients failed with the following error. These are
clients that were successfully backed up Friday, with no change to any
configs.
29-Aug 20:47 sioux-dir: auriga.2005-08-29_20.00.29 Fatal error:
authenticate.c:99 Unable to authenticate with Storage daemon.
Possible causes:
Pa
Caesar Neron wrote:
I´m Running Bacula on a Debian with 2.4.27-2-386 Kernel, bacula reports
556.44 GB recorded on the tape and it is not Full. Is it right? should I
configure someting with mt parameters the tape drive?
It depends on how compressible the data is. If the data is highly
compressib
Michael Dauer wrote:
Hello,
I have a second partition mounted as /var. Despite Bacula should backup all (/)
it does not include /var.
Both root partition and var partition are ext3.
The relevant file set is:
FileSet {
Name = "Full Set"
Include {
Options {
signature = MD5
c
Kern Sibbald wrote:
On Monday 22 August 2005 14:21, Thomas Simmons wrote:
Kern Sibbald wrote:
On Monday 22 August 2005 04:32, Peter Sjoberg wrote:
On Sun, 2005-08-21 at 01:38 -0400, Phil Stracchino wrote:
Thomas Simmons wrote:
No one has any thoughts on this?
Thanks,
Thomas
Thomas
Kern Sibbald wrote:
On Monday 22 August 2005 04:32, Peter Sjoberg wrote:
On Sun, 2005-08-21 at 01:38 -0400, Phil Stracchino wrote:
Thomas Simmons wrote:
No one has any thoughts on this?
Thanks,
Thomas
Thomas Simmons wrote:
Hello Everyone,
From what I understand, if I have "Full B
No one has any thoughts on this?
Thanks,
Thomas
Thomas Simmons wrote:
Hello Everyone,
From what I understand, if I have "Full Backup Pool = Full-Pool" in the
job resource then any job on that client that gets upgraded to full,
should use the "Full-Pool". This is not hap
Hello Everyone,
From what I understand, if I have "Full Backup Pool = Full-Pool" in the
job resource then any job on that client that gets upgraded to full,
should use the "Full-Pool". This is not happening and is really a big
problem for laptops that are not on site everynight. If the laptop
miss
Hello Everyone,
From what I understand, if I have "Full Backup Pool = Full-Pool" in the
job resource then any job on that client that gets upgraded to full,
should use the "Full-Pool". This is not happening and is really a big
problem for laptops that are not on site everynight. If the laptop
I don't know if there's a "proper" way to do it, but you can search for
a file using grep, which will give you the full path, then you can
restore it with the restore command.
lightning:~# echo "list files jobid=2" | bconsole | grep bacula-fd.conf
| c:/bacula/bin/bacula-fd.conf
I have also been randomly recieving a VSS error, however it is different
than the one previously mentioned. bacula-dir prints the following message.
Warning: Generate VSS snapshots failed. ERR=The system could not find
the environment option that was entered.
While the following is logged in
Hello List,
I remember reading about this problem on the list a while back. I just
ran into it myself and found a solution. (tested on a nforce4 board with
onboard nvidia gigabit NIC)
Browse to:
Start > Control Panel > Network Connections
Right click the connection for the nvidia adapter and
Does the user "bacula", or the group "tape" have permission to access
/dev/sg3?
Thanks,
Thomas
Bennett, Silas (GE Infrastructure) wrote:
Just a reminder that I am waiting patiently... ;0)
So far bacula works fine for everything but controlling the autoloader. The
mtx-changer script works fin
That seems pretty slow to me. I just did a test and it took 10 seconds
to build the tree for ~400,000 files. Like you, I too have an opteron
system, a dual 246 w 1/GB ram, however I keep the database on a set of
mirrored sata disks on the local server. Have you tried installing the
database on
Some testing will
be necessary before I post a new version.
More later today.
On Thursday 21 July 2005 04:30, Thomas Simmons wrote:
Seems I spoke too soon. After seeing the output:
21-Jul 21:59 nemo-fd: Generate VSS snapshots. Driver="VSS WinXP",
Drive(s)="C"
21-Jul 21:
Seems I spoke too soon. After seeing the output:
21-Jul 21:59 nemo-fd: Generate VSS snapshots. Driver="VSS WinXP",
Drive(s)="C"
21-Jul 21:59 nemo-fd: VSS Writer: "MSDEWriter", State: 1 (VSS_WS_STABLE)
21-Jul 21:59 nemo-fd: VSS Writer: "Microsoft Writer (Bootable State)",
State: 1 (VSS_WS_STABL
Kern, List,
I figured out what the issue is! When backing up an entire drive, an
asterix must follow the trailing /. If the fileset is specified as
follows VSS will not be used:
FileSet {
Name = "default-winxp"
Enable VSS = yes
Include {
Options {
signature = MD5
Ok, I set everything up here at home and I'm getting the same thing. I
first tried backing up my laptop, which was the client I was testing
with at work, the "cannot open file" errors persisted. I then set up the
FD on another XP system I have here. Unfortunately it has the same
issue. Here's s
I'm trying to install 1.37.30 on debian sarge, I've installed mysql and
the mysql dev package via apt. Here's the output I get.
[EMAIL PROTECTED]:~/bacula-1.37.30$ ./configure
--sbindir=/usr/lib/bacula/bin --sysconfdir=/usr/lib/bacula/bin
--with-pid-dir=/var/lib/bacula/bin/working
--with-subs
Hello everyone,
I have 5 hosts to backup, currently I have a single job setup for each
host, and bacula's been running a full on sun and diffs every other day
like it's supposed to. Now my backup HDD is full and I need to setup
bacula for the long term. The backup HDD can hold two weeks worth
I've got everything working with filestorage, and now I want to do some
testing with my library (exabyte 10h w/8705). The mtx scripts and btape
both seem to work fine. Whenever I try to access the storage daemon
(label, status...), bacula(1.36.2) hangs indefinitely. If I manually put
a tape in
36 matches
Mail list logo
