[Alsa-user] maestro3

Used the wiki.debian.org/snd-maestro3 walk-thru and the alsamixer doesn't work. On the walk-thru it says to change to the firmware directory then ./configure cd maestro3 && make mkdir /lib/firmware/ESS cp *fw /lib/firmware/ESS then modprobe -r snd-maestro3 && modprobe snd-maestro3 which didn't wo

Re: [Alsa-user] Maestro3 stops working after upgrade to linux 2.6.24

Thanks to Jordi Mallach: The Alsa modules need to be updated to 1.16 for the maestro3. (m-a is the module assistant, you may need to get that first). aptitude alsa-source m-a prepare m-a build alsa m-a install alsa I tried alsaconf first, but needed to reboot to get it working. Ferry Op zond

[Alsa-user] Maestro3 stops working after upgrade to linux 2.6.24

After just upgrading linux-image-686 from 2.6.22 to 2.6.24+13 my Meastro3 does not work anymore. The version of alsa-base has not changed (remains 1.016-1) however syslog shows: Maestro3: probe of :02:01.0 failed with error -2 The lines preceeding this one are: ACPI: PCI Interrupt :02

[Alsa-user] Maestro3 sound recording problem on Omnibook Xe3

Hi, I've installed the latest ALSA drivers on an Omnibook Xe3 having an ESS Allegro-1 soundcard. I have RedHat 9, kernel 2.4.20-8 on the notebook. Unfortunately I can not record sound using the microphone in an acceptable quality. This means, that after enablig Mic Boost, and setting the volumes i

Re: [Alsa-user] maestro3 , redhat 9, inspiron 8000 help...

Marc Boorshtein wrote: > I added the following to my modules.conf and removed all the oss > stuff,but it's like it isn't there! > > alias sound-slot-0 snd-maestro3 > post-install sound-slot-0 /usr/sbin/alsactl restore >/dev/null 2>&1 || : > pre-remove sound-slot-0 /usr/sbin/alsactl store >/dev/null

[Alsa-user] maestro3 , redhat 9, inspiron 8000 help...

Hello, I hav alsa installed on my redhat 9 inspiron 8000 laptop. I am running alsa .9.6 but it doesn't work! I added the following to my modules.conf and removed all the oss stuff,but it's like it isn't there! there is nothing in dmesg or /var/log/messages. alias sound-slot-0 snd-maestro3 pos

[Alsa-user] maestro3

When I record on (inbuilt) mic on DELL laptop, I get constant background "tic tic tic" - may be at about 100 bpm or something: arecord -r 44100 t.wav I get the same when recording using ardour, eg. the following signal path: ardour <- jack <- alsa Is it a maestro3/ inbuilt mic problem? Don't

Re: [Alsa-user] maestro3 problem: NOT ENABLED IN CONFIG

Hi, At Thu, 11 Apr 2002 09:19:44 -0700 (PDT), Thomas Seyfarth wrote: > > Hi, > > try to use my ESS Allegro 1988 sound card with ALSA, > all modules are loaded, channels are unmuted, but > there > ist no sound when I use aplay. > > Did the usual ./configure; make install > stuff, but why is the

[Alsa-user] maestro3 problem: NOT ENABLED IN CONFIG

Hi, try to use my ESS Allegro 1988 sound card with ALSA, all modules are loaded, channels are unmuted, but there ist no sound when I use aplay. Did the usual ./configure; make install stuff, but why is the Audio device not enabled (NOT ENABLED IN CONFIG)? Missed some simple config params? Thank

[Alsa-user] Maestro3 problems and snd_amp_gpio

Can anyone offer some advice on the Maestro3. Trying to install a Magic I/O PCI card using ESS ES1988 Allegro-1 chipset under redhat 7.2 with kernel 2.4.7-10. ALSA drivers/libs and utils all compile fine. Modprobe works fine and module appears to load into the kernel without error. ALSAmixer re

[Alsa-user] maestro3

I have been trying to find detailed information on this chipset can't find anything worth reading. I am using a dell inspiron 8100 running Gentoo, trying to use Alsa for sound. I can get it to work to some degree but have not found a way to adjust bass or treble.this thing is tiny!!! Mu

[Alsa-user] Maestro3 Four-channel support?

Does the maestro3 driver in alsa-0.9 support 4-channel? I know that the hardware can, but has it been implemented? If not, which drivers do support this feature? Thanks -- -Steven In a time of universal deceit, telling the truth is a revolutionary act. -- George Orwell

[Alsa-user] Maestro3 and Motherboard Via686a

Hi, I have problems with those 2 cards. I have installed alsa on many computers, for many cards, but I have many unsolved problems with these soundcards (I'm using alsa 0.9 beta8a). Maestro3: * runs fine, but sometimes (often I should say), when a short sound has been played, I hear the end of t

[Alsa-user] Maestro3 (0.9beta7) and Rune

Rune seems to just lockup when using ALSA drivers for the maestro3, leaving just a black screen when starting. Anyone else experienced this problem? Any idea how to get around it? btw, other openAL games seem fine... kohan, sof, etc. -- .: OvErRiDe X .: ICQ: 7171522 Penguin Power! www.slackw