Hello
I have SB Live 5.1 card connected to Cambridge Soundworks DTT3500 using
original digital cable (jack to mini-DIN).
My problem is that i cannot configure alsa to use rear speakers - but ONLY when
i'm using SPDIF TTL input
(this input is matched as CD_SPDIF - you can see it here:
http://mani
Mandar Mitra wrote, on 2007-05-25 03:46:
> Hello again,
>
> I decided to test every bit of the system and it did turn out to be a
> hardware (cabling) problem after all!
>
> My sincere apologies to all those who spent time trying to help me. A
> wrong "capture source" setting in my fedora 2 insta
Hello again,
I decided to test every bit of the system and it did turn out to be a
hardware (cabling) problem after all!
My sincere apologies to all those who spent time trying to help me. A
wrong "capture source" setting in my fedora 2 installation had misled
me into believing that I was recordi
Mandar Mitra wrote, on 2007-05-21 01:29:
> On 5/18/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
>
>> After some tweaking with kmix for my SB0220 card, I found that I had to
>> set on the INPUT tab:
>>
>> Capture red recording light ON, level didn't seem to matter
>
> OK, I installed kmix. Now I
On 5/18/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
> After some tweaking with kmix for my SB0220 card, I found that I had to
> set on the INPUT tab:
>
> Capture red recording light ON, level didn't seem to matter
OK, I installed kmix. Now I have Capture and Line (in the Input tab)
on, and the le
Mandar Mitra wrote, on 2007-05-17 04:00:
>>> cat /proc/asound/version (for the current setup that doesn't work)
>
> So I downloaded, compiled and installed alsa-driver, alsa-lib,
> alsa-utils, and now /proc/asound/version says:
>
> Advanced Linux Sound Architecture Driver Version 1.0.13.
> Compil
> > cat /proc/asound/version (for the current setup that doesn't work)
So I downloaded, compiled and installed alsa-driver, alsa-lib,
alsa-utils, and now /proc/asound/version says:
Advanced Linux Sound Architecture Driver Version 1.0.13.
Compiled on May 16 2007 for kernel 2.6.13-15-smp (SMP).
I'
Hi,
On 5/15/07, Arthur Marsh <[EMAIL PROTECTED]> wrote:
> lspci -v|grep -i live
mitra% /sbin/lspci -v | grep -i live
02:03.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! 5.1 Model SB0100
02:03.1 Input device controller: Creative La
Mandar Mitra wrote, on 2007-05-15 11:56:
> Hello all,
>
> If you have a SB Live 5.1 card, could you please do an experiment for
> me? Could you record something via line-in and see if you get both
> channels?
>
> When I do this, I get only the right channel. Left channel is muted,
> and tweaking
Hello all,
If you have a SB Live 5.1 card, could you please do an experiment for
me? Could you record something via line-in and see if you get both
channels?
When I do this, I get only the right channel. Left channel is muted,
and tweaking various things via alsamixer is not helping. I've found
o
Attempting to install the correct Dell OEM snd-emu10k1x driver this time as per http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labs&card=Sound+Blaster+PCI+X+%28Dell+OEM%29.&chip=SB0200&module=emu10k1x, I reach the point of inserting the modules into the kernel. When I a
Hi,
Soundblaster Live Value card (device id - 1102:0006) is not supported.
It looks like it is not based on emu10k1.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This SF.ne
Hi,
While browsing through the user comments for the Soundblaster Live Value card (device id - 1102:0006), I came across this comment by Hviid, dated 28 april 2003, wherein he says that the SB Live shipped with the Dell dimension series 8200 is not supported. What is the status of that card now
Subject: Re: [Alsa-user] SB Live 5.1 multiple soundfonts
Date: Thu, 30 Oct 2003 16:23:43 +
>
> I managed to load soundfont with sfxload. But then I wanted to load
> multiple fonts and tried
> sfxload -b1 (and with -b0) myFont. If I have understood correctly, after
> that I should have
>
> I managed to load soundfont with sfxload. But then I wanted to load
> multiple fonts and tried
> sfxload -b1 (and with -b0) myFont. If I have understood correctly, after
> that I should have more instruments to choose in my midi program (muse,
> noteedit).
>
> However, it doesn't do any change.
Hi all!
I couldn't find anywhere info so I am again writing to list again. If I get
help, I promise to make webpage containing info to help others.
So my system is Gentoo with 2.6 kernel and alsa 0.9.8. My card is SB Live
5.1 digital.
I managed to load soundfont with sfxload. But then I wanted
On Fri, 20 Jun 2003, Ken Witherow wrote:
> I've got a SB Live 5.1, which is working fine with ALSA in 2.5.69, but in
> either 2.5.70 (don't remember if it worked since I had other problems) or
> 2.5.71, it stopped working, giving me the following error on load:
fixed by running snddevices from 0.
I've got a SB Live 5.1, which is working fine with ALSA in 2.5.69, but in
either 2.5.70 (don't remember if it worked since I had other problems) or
2.5.71, it stopped working, giving me the following error on load:
Jun 17 15:33:02 death kernel: Advanced Linux Sound
Architecture Driver Version 0.9.
I have SB Live! 5.1 (emu10k1) and I used emu10k1 driver from
http://sourceforge.net/projects/emu10k1/
That driver has no wavetable support, so I switched to alsa 0.9
driver. Now, wavetable synthesis works fine. Problem is that now
I don't get any sound from rear speakers. I tried to change volu
I searched the archives and tried out some settings with alsamixer but I just
can't get my sblive to work correctly.
Currently I'm using the normal oss kernel driver. I just plug in my second
speaker pair into the second output adjust the OGain and physical volume a
bit so that the rear speake
I have a SB Live! 5.1 and 5.1 surround sound speakers. The center
connector for the 5.1 surround sound doubles as the digital out for the
5.1 card... I was wondering if it's possible to enable 5.1 surround
sound without digital out, since digital out to my analog speakers just
makes a nice sta
From: "Denny Schierz" <[EMAIL PROTECTED]>
To: "Brad Cramer" <[EMAIL PROTECTED]>
Cc: "alsa-user" <[EMAIL PROTECTED]>
Sent: Tuesday, December 04, 2001 12:46 PM
Subject: Re: [Alsa-user] SB Live 5.1 and digital out
> hi,
>
> you have to slide u
I have built a new system with a SB Live 5.1 and DTS3500 Cambridge
Soundworks Speaker System. I am using the digital out connector with the
cable that comes with the speakers. It works fine with W2K but using
alsa-0.9.0beta9 I can get no sound. I have unmuted all setting with
alsamixer and as far
Hi,
I've got ALSA working with stereo output on this card but not surround
sound. From messages on alsa-devel, it looks like other people have gotten
this working with at least four speakers; possibly all six.
My situation now:
- "front" works perfectly.
- "back" produces no error but no audio
24 matches
Mail list logo
