On Fri, May 3, 2013 at 9:24 PM, Bill Unruh wrote:
> On Fri, 3 May 2013, Joe Armstrong wrote:
>
>> On Fri, May 3, 2013 at 7:39 PM, Bill Unruh wrote:
>>>
>>> On Fri, 3 May 2013, Joe Armstrong wrote:
>>>
>>>
>>> Try running apla
On Fri, May 3, 2013 at 7:39 PM, Bill Unruh wrote:
> On Fri, 3 May 2013, Joe Armstrong wrote:
>
>
> Try running aplay, etc as root, and see if it works, to see if it is some
> permission problem. If that does not work either,then the problem lies
> elsewhere.
Well running aplay
On Fri, May 3, 2013 at 6:45 PM, Bill Unruh wrote:
> On Fri, 3 May 2013, Joe Armstrong wrote:
>
>> joe@nuc:~$ grep audio /etc/group
>> audio:x:29:pulse,joe
>> joe@nuc:~$ whoami
>> joe
>
>
> Good. So now it works?
>
> (Note that I removed the alsa user
Sorry it was a typo - I did do adduser
/Joe
On Fri, May 3, 2013 at 4:44 PM, Bill Unruh wrote:
> On Fri, 3 May 2013, Clemens Ladisch wrote:
>
>> Joe Armstrong wrote:
>>>
>>> This is what I did:
>>>
>>>> sudo adduer joe audio
>
>
> What
Thanks Clemens,
There is now a error message concerning "hybrid-gfx"
This is what I did:
> sudo adduer joe audio
and reran the test
A bit of Googling later seems like I'm missing an executable called
hybrid-detect
I search my disk and can't find a hybrid-detect anywh
nput: HDA Intel PCH HDMI as
/devices/pci:00/:00:1b.0/sound/card0/input7
[4.160206] init: Failed to spawn hybrid-gfx main process: unable
to execute: No such file or directory
Any ideas what could be wrong?
/Joe
--
On Sat, Jul 21, 2012 at 06:04:59PM +0200, Clemens Ladisch wrote:
> Joe Nahmias wrote:
> > I have my custom HTPC hooked up to my receiver using HDMI for both audio
> > and video. Through some trial and error, I managed to find the correct
> > invocation to give me 5.1-channe
=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
Thanks in advance for your assistance,
--Joe
--
Live Security Virtual Conference
Exclusive live
=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
Thanks in advance for your assistance,
--Joe
PS - Please cc me on all replies.
--
Live Securi
e.
I am also adding verbose output and strace output from an aplay through the
Audigy card.
Any thoughts on what to try?
--
Joe
=
aplay -vv -Ddefault:0 /usr/share/sounds/email.wav
Playing WAVE '/usr/share/sounds/email.wav' : Signed 16 bit Little Endian
isted below.
Anybody have any thoughts on what to try?
--
Joe
aplay -vv -Ddefault:0 /usr/share/sounds/email.wav
Playing WAVE '/usr/share/sounds/email.wav' : Signed 16 bit Little Endian,
Rate 44100 Hz, Mono
Plug PCM: Rate conversion PCM (48000, sformat=S16_LE)
Its setup is:
stream
et audio 1
...This disables the audio bit before xine plays (using passthrough) then
enables it back again so MP3s and standard digital PCM can play when Xine is
done. Now everything works great. :)
Regards,
--
Joe
Hi all,
I was wondering how much support is currently in alsa for the ALC889a.
I have two problems that I am trying to get to the bottom of.
1. I can't seem to control the CD-in capture. I have 3 capture
sliders, all named 'Capture', but when recording I get nothing from
the CD input.
2. HDMI
Help! my audio has stopped working
Here is the relevant part of my .xsession-errors file:
ALSA lib confmisc.c:670:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3500:(_snd_config_evaluate) function snd_func_card_driver
returned error: No such device
ALSA lib confmisc.c:391:(snd_func_
the ALC888).
On 7/13/07, Joe Thielen <[EMAIL PROTECTED]> wrote:
Can anyone tell me if the ALSA driver for the STAC9271 or STAC9271D
supports Dolby 5.1 passthrough via S/PDIF?
I have only limited experience with this, but I wish to build an HTPC with
Linux. I've played with an HP Slim
Can anyone tell me if the ALSA driver for the STAC9271 or STAC9271D supports
Dolby 5.1 passthrough via S/PDIF?
I have only limited experience with this, but I wish to build an HTPC with
Linux. I've played with an HP Slimline s3120n (ALC888 chipset) which has a
coax/RCA digital out. I was able t
!
> No kernel boot options are snd-hda-intel module options are required.
I don't have a laptop, but a normal motherboard with the Intel 82801G and
very low sound, I'd like to try that.
Please provide a link to the realtek.c
tings, to no avail.
Oh, and I forgot: the chip is a Realtek ALC655.
-Joe
Joe Feise wrote on 04/15/07 14:50:
> I have an ECS 945P-A (v3.0) board, and I can't get it to output sound.
> I am running KnoppMyth R5E50 (Debian-based) with a 2.6.18 kernel.
> I updated the ALSA driver to 1.0
appreciate any help.
-Joe
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.n
Although I can't offer any help, I wanted to say that I'm having the
exact same problem. /proc/asound/cards just says "no soundcards". All
modules load without error.
Kernel 2.6.5-mm3, ALSA 1.0.3, au8830 soundcard
Eric U wrote:
> alsamixer: function snd_ctl_open failed for default: No such device
-with-sequencer=yes --with-oss=yes --with-cards=au8830
make -j2
I also tried it without the --with-cards or -j2 flags, and that had no
effect.
So, am I doing something wrong here, or have I found a bug?
-Joe
---
This SF.Net email is sponsored by: IBM
Hi:
Just finished installing Kernel 2.6.1 and the Alsa
module.
Sound works great but everytime I reboot (and the
modules are reloaded) the volumes are all set to zero
and muted. I have to run alsamixer and turn them back
on. Is there a config file for alsamixer that can be
read when the module
On Sun, 2003-12-07 at 12:01, Jure Repinc wrote:
> Dne nedelja 07. decembra 2003 18:48 je Marco Tommaso Coiatelli napisal(a):
> > Hi All! I fixed the problem with the distortion of cs4624 chip.. Well,
> > nothing to be pride of at all! I simply installed Slackware 9.1 instead
> > of Mdk 9.1 and then
38.html
says that
snd-card-cs4236 alsa module
needs to be used (though I'm not sure how the poster figured that out).
A follow-up post says "It worked only when I enabled ISAPnP in the kernel."
I'm afraid rapidly getting out of my depth here. Anyone willing
tried almost matching the code in the OPL3 directory with the code from
.9.0rc7, but still no go. Thanks. BTW, this is on a SuSE 8.2 machine.
--
Joe Morris
New Tribes Mission
Email Address: [EMAIL PROTECTED]
Web Address: http://www.mydestiny.net/~joe_morris
Registered Linux user 231871
God said, I AM
It depends on your sound card, from what I have been able to gather.
The Turtle Beach Santa Cruz apparently cannot mirror the front->rear
channels, for some reason. I read somewhere it was because the DSP
specifications weren't released by cirrus logic, but I have not found a
solution to this yet
but I
can alter the code and recompile to check it if anyone has any ideas.
TIA for any help.
--
Joe Morris
New Tribes Mission
Email Address: [EMAIL PROTECTED]
Web Address: http://www.mydestiny.net/~joe_morris
Registered Linux user 231871
God said, I AM that I AM. I say, by the grace of
God, I am
kling noise
when the video starts. I can play mp3's using the mythmusic modules. I tried
the settings that are listed in the soundcard matrix, but this hasn't
helped. Any suggestions would be greatly appreciated.
Thanks,
Joe
__
I have seen several people with this problem, and even seen a few people
who claim they've gotten it working, but I have had absolutely no luck
getting all four channels (and maybe center/LFE?) to play
simultaneously. I'm using alsa 0.9.6 right now, as well as the
xmms-alsa plugin. The card is a
Hi!
I couldn't find the answers for these questions in the doc :)
Is the via82xx driver supports full-duplex mode?
If it's supported, can anyone give me some directions
how to enable it?
Thnx & Bye:
JoE
---
This SF.Net email spon
?
4 - What tools are good for testing the midi-in and midi-out ports?
Right now, I'm trying to use a home-grown loopback test which, even if
it's working properly, doesn't tell the difference between a problem
with input and output.
- Joe
--
with ALSA. The module loads, but no sound. And
yes, I (think at least - there are so many to choose from) unmuted and
put up volume for just about any mixer I could think off.
Before digging deeper - is this card at all supposed to work with ALSA
CU, Joe
On a new laptop (VPR Matrix 200, made by Best Buy of all people, and so far excellent,
only Linux stumbling block has been sound) I have tried with 9.0rc6 and all 2.5
kernels after 2.5.50 and either the system will hang trying to get the codec loaded
and will invariably fail with:
ALSA sound/p
Alright, this is rather frustrating so I hope someone can help. I got
the driver loaded and it appears to be working. However, I have no
sound and I believe it's because I have to unmute the card using a
mixer. I can't get the libraries to compile, hence I can't get the
utilities to compil
because my modules.conf is messed up.
Sndconfig detects my card, so I know that the plugnplay stuff works.
Any suggestions?
Joe Sislow
Cosmodog, Ltd.
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
--
Joe Sislow
Cosmodog, Ltd.
[EMAIL PROTECTED]
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
ib/modules/2.4.14/misc/snd.o: insmod snd-card-intel8x0 failed
Any ideas?
--
%%%%%%%%
Joe Sislow
Cosmodog, Ltd.
[EMAIL PROTECTED]
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
37 matches
Mail list logo
