Hallo,
Peter Wallin hat gesagt: // Peter Wallin wrote:
> Also when the ALSA-USB portion fails, the regular OSS drivers seems
> to have kicked in (since I can run kmixer with no problem and
> configure the usb-card). This is especially strange since I have
> commented out the OSS-portion of modules
Hi Frank,
On Wed, 2003-07-16 at 15:37, Frank Barknecht wrote:
- snip -
>
> /proc/asound/dev was removed in ALSA 0.9.4 (?), I think. You need to
> remove the symbolic link "rm -f /dev/snd" and then run the snddevices
> script from 0.9.4. It should be included in the alsa-driver package on
> alsa-p
Hi again,
> output of 4 seperate channels on the xfire should work since alsa version
> from Thu May 15 13:16:00 2003 UTC (2 months ago).
Sorry for leaving out so many details, so:
Redhat-linux 8.0 with 2.4.21 kernel, Alsa 0.95. I followed the guidelines at
http://www.alsa-project.org/alsa-doc/doc
Thanks Takashi,
Success. Finally, alsa-driver-0.9.5 is now SMP ready :)
> Takashi Iwai
> At Wed, 16 Jul 2003 10:49:46 +0100 (WEST),
> Rui Nuno Capela wrote:
>>
>> Hi everyone,
>>
>> After a couple of diff-paches kindly sent by Takashi, I'm still doomed
>> to
>> fail on building alsa-driver-0.9.5
you are right, snddevices got alsamixer to run. thanks, and to bob
lockie also. Sound is still muted after each reboot though, even after I
ran alsactl store and got a /etc/asound.state file saved. Any ideas why
that is?
thanks, I actually heard sound on a machine I thought i'd never see hap
On Mon, Jul 14, 2003 at 08:31:37PM +0200, Martin Fiedler wrote:
> > Anyone gotten AC3 passthrough to the SPDIF output on a YMF754 chip to work?
>
> Yes, works flawless here through optical out. I tested ac3-avis, DVDs in
> mplayer/xine and had no problems at all.
What receiver do you have? My
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have an onboard intel 845 chipset using the
snd-intel8x0 alsa driver for sound, everything
works fine except that alsactl hangs on either
a save or restore, except during the initial
boot it when it loads ok. I'm using alsa
0.9.4 and I'm sure I've r
On 07/16/03 06:37 Christian From spoke thusly
I'm trying to get some sound from my delta66 card from m-audio under
Mandrake 9.1. The driver ice1712 seems to be there and working, but no sound.
I was told I had to open alsamixer and unmute all channels, but I can't open it, I'm getting "no mixer e
On 07/16/03 02:19 Justin Zygmont spoke thusly
I was trying to unmute my sound card, and I am getting this error:
amixer: Mixer attach default error: No such file or directory
Does anyone know what this means?
also, thanks for the previous help. It hasn't been easy getting even this
far.
What
On 07/16/03 07:10 Bakhrom Khakimov spoke thusly
Hi, All!
ASUS P4S8X-X, SiS648 chipset with onboard sound SiS7012.
RedHat 8.0, kernel 2.4.18-14, alsa-driver0.9.2.
Who has correctly work the same system, please help!
Bakhrom
Are the channels unmuted?
Run 'alsamixer'.
Last week I sent out the message below trying to describe my problems with a
reinstallation of Debian sid on my laptop. After working it quite a bit
more, I THINK it may actually be a devfs problem. I feel like I'm missing
something very simple, and am sure I'll be embarrassed I didn't think of i
Hi Johannes,
output of 4 seperate channels on the xfire should work since alsa version
from Thu May 15 13:16:00 2003 UTC (2 months ago).
I don't remeber which alsa version i've installed (0.9.4 ?) and 4 channel
output works for me, i.e. i can use the device surround40 to output 4 channel
surround
Hi!
gmorgan is a .. Rhythm Station, an organ with auto-accompaniment and a "small"
Band in a Linux Box. Uses MIDI and the ALSA sequencer for play the rhythm
patterns. Styles, patterns , sounds, and the mixer settings, can be edited
and saved.
Program is released GNU/GPL version 2.
News on
Le Mercredi 16 Juillet 2003 12:37, Christian From a écrit :
> I'm trying to get some sound from my delta66 card from m-audio under
> Mandrake 9.1. The driver ice1712 seems to be there and working, but no
> sound. I was told I had to open alsamixer and unmute all channels, but I
> can't open it, I'm
Hi,
I've searched the web for this issue, but I didn't find a solution, here it
is:
The following pcm-devices are listed in /proc/asound/CS46xx
pcm0c (Line-in?)
pcm0p - front speakers
pcm1p - rear speakers
pcm2p - iec958 (untested)
looks fine, but when I run
$ aplay -D rear some.wav
there is no
Peter Wallin wrote:
> I'm using a Turlte Beach Santa Cruz (CS46xx) PCI-card and a Sound
> blaster MP3+ card. The Santa Cruz is doing fine, but I'm having
> lots of difficulties with the USB-card.
>
> At times I can get the whole setup running perfectly. But this
> usually requires several re-boots
Ben Saylor wrote:
> > > and load the firmware using fxload?
> >
> > Unfortunately, the Audiophile uses a different loading mechanism.
>
> Is it DFU?
It's DFU, or something very similar.
> There's a driver at http://at76c503a.berlios.de/ that contains a
> DFU kernel module (usbdfu.c). Could this
Hi, All!
ASUS P4S8X-X, SiS648 chipset with onboard sound SiS7012.
RedHat 8.0, kernel 2.4.18-14, alsa-driver0.9.2.
Who has correctly work the same system, please help!
Bakhrom
ICQ: 36667420
---
This S
Title: Trouble with USB-audio (Soundblaster MP3+)
I'm using a Turlte Beach Santa Cruz (CS46xx) PCI-card and a Sound blaster MP3+ card. The Santa Cruz is doing fine, but I'm having lots of difficulties with the USB-card.
At times I can get the whole setup running perfectly. But this usually r
I'm trying to get some sound from my delta66 card from m-audio under
Mandrake 9.1. The driver ice1712 seems to be there and working, but no sound.
I was told I had to open alsamixer and unmute all channels, but I can't open it, I'm
getting "no mixer elems found" in the terminal when I try it.
Is
At Wed, 16 Jul 2003 00:31:00 +1000,
Gavin Norman wrote:
>
> I'm have a VIA8235 chipset and are using the snd-via82xx drivers. I'm
> attempting to use ices and my Line-In port for broadcasting, and use the
> computer as a desktop also. Am I able to broadcast the feed on the Line-In
> port and ab
At Wed, 16 Jul 2003 12:55:59 +1000,
correy wrote:
>
> Modprobe stalls on isapnp.o
> with unresolved symbols such as
> proc_root_
> remove_proc_entry
> proc_bus
> create_proc_entry
>
> isapnp /etc/isapnp.conf works and detects the soundcard however the alsa
> pnp is stalling is it to do with my k
At Wed, 16 Jul 2003 10:49:46 +0100 (WEST),
Rui Nuno Capela wrote:
>
> Hi everyone,
>
> After a couple of diff-paches kindly sent by Takashi, I'm still doomed to
> fail on building alsa-driver-0.9.5 for a SMP kernel.
oh, sorry i forgot to send you another patch.
all things have been fixed already
At Wed, 16 Jul 2003 02:19:50 -0400 (EDT),
Justin Zygmont wrote:
>
> I was trying to unmute my sound card, and I am getting this error:
>
> amixer: Mixer attach default error: No such file or directory
>
> Does anyone know what this means?
>
> also, thanks for the previous help. It hasn't been
Hi everyone,
After a couple of diff-paches kindly sent by Takashi, I'm still doomed to
fail on building alsa-driver-0.9.5 for a SMP kernel.
To no surprise, I did manage to make and install successfully on a UP
kernel (otherwise same kernel config).
So, now I'm certain this is a definite SMP issu
Hallo,
Stephen Liu hat gesagt: // Stephen Liu wrote:
> # ls -l /dev/snd
> lrwxrwxrwx1 root root 16 Jul 15 15:27 /dev/snd ->
> /proc/asound/dev
>
> It is a symbolic link
>
> # cd /proc/asound/
> bash: cd: /proc/asound/: No such file or directory
>
> # ls -l /proc/asound/dev
> l
Hello All,
is it necessary to recompile all sound-apps after changing alsa version from
0.9.4 to 0.9.5?
Ralph
--
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
Jetzt ein- oder umsteigen und USB-Speicheruhr als Prämie sichern!
---
27 matches
Mail list logo
