Try to increase communication timeout by:
SETOPT IDLETIMEOUT 60
or more than 60 minutes
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of mik
q opt IDLETIMEOUT
or dsmserv.opt
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of mik
Sent: 30 01 2014 12:06 PM
To: ADSM-L@VM.MARIST.EDU
Subject
directories in new MC and added DIRMC into dsm.opt on all
nodes, but I still can see directories in new MC.
How to move directories from one MC to other?
Thank you very much in advance.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
It is not clear for me as well.
I could see list of directories by:
q cont node= - for node, which should not be on this volume.
I have tried to move data by:
move nodedata
but it says "No match found using this criteria."
Grigori Solonovitch, Senior Systems Architect, IT, Ahli U
I am very sorry. You can ignore my previous messages.
I have found some small portions of data - not directories.
I have moved data to correct STG by MOVE NODEDATA.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From
No way for real tapes. You can use Data Domain VTL replication for primary
pools, by the way.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
TSMExplorer at s-iberia.com
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Saravanan
Sent: 31 03 2014 7:50 PM
To: ADSM-L@VM.MARIST.EDU
Subject
I think next sequence of actions can help:
1) change some policy sets to reduce expire period (some old data will be
lost!) ;
2) activate policy set;
3) run "expiry inventory" and, maybe, some volumes will become empty to start
reclamation.
Good luck!
Grigori Solonovitch, Seni
reliable and I do not
think TDP for VM is less expensive. We are using only traditional TSM backups
for MS Clusters with RDMs, where Veeam is not working.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist
ation. Yes, it is a little bit expensive solution, but combination
Veeam + TSM backups (without TDP for VM) is extremely reliable and I do not
think TDP for VM is less expensive. We are using only traditional TSM backups
for MS Clusters with RDMs, where Veeam is not working.
Grigori Solono
ted and you need to pay specific
attention for each used version and selected target version;
3) for Exchange see MS SQL.
I hope this information will help you at least a little bit:):)
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original
Just rename *.bin to *.tar and un-tar it.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Rhodes, Richard L.
Sent: 30 04 2014 3:37 PM
To: ADSM
After changing IP you need to restart RSM services (at least TSM Scheduler, if
in use). New TCP/IP will be visible on YSM server.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager
I am facing the same problem on Windows 2012 with TSM Client 7.1, but I
couldn't explain this. Maybe rest of objects is coming from SYSTEMSTATE?
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist
alculated wrongly as well.
What is the source of problem?
Data Domain deduplication or something else?
Shall I ignore this problem?
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
CONFIDENTIALITY AND WAIVER: The info
Thank you very much for RFE and information. I will try to modify device
classes.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Grant
Street
Thank you very much for response.
I agree with you totally, but estimated capacity is wrong in TSM for many
primary pools allocated on Data Domain VTL. For example, for 128 tapes with
size 64GB (max 8192GB) it gives "Estimated Capacity: 18,191 G".
Any comments?
Grigori Solonovit
and
monthly backups at all.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Saravanan
Sent: 15 10 2014 11:00 AM
To: ADSM-L@VM.MARIST.EDU
Subject
Most possible you have IP duplication clients. Windows is selecting some
strange addresses in this case. Please check client configuration (preffered)
by "ipconfig /all" and try to restart TSM services on clients.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United B
Thank you very much Stefan. I found this site very useful.
At the same time, FTP site is not stable - it is quite difficult to download
big files.
It just gives "download interrupted" and starts from the beginning after
resuming.
What could be a problem?
Grigori Solonovitch, Seni
Thank you very much.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Erwann
SIMON
Sent: 13 11 2014 9:34 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re
allows to
simulate recovery in VMware environment (backup testing without touching real
VMs) for most valuable VMs or keep it scheduled at all.
I have no experience with FastBack and couldn't compare products.
Kindest regards,
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United
Most possible some data has been expired from last write 01/06/2015 22:27:18
and reclamation process not started yet due to volume usage 72.9%.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor
Maybe "delete archive data"?
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Kiran
Sent: 21 01 2015 1:38 PM
To: ADSM-L@VM.MARIST.EDU
S
Try to "move data " if number of volumes is not big.
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Kiran
Sent: 21 01 2015 1:59 PM
In AIX I am using " nohup /usr/bin/dsmcad &"
Grigori Solonovitch, Senior Systems Architect, IT, Ahli United Bank Kuwait,
www.ahliunited.com.kw
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
madu...@gmail.com
Sent: 12 05 2015 8:
Hello Tom,
I am using WEB Client function "Utilities --> Delete Filespaces..." to resolve
similar problem.
It is very easy and useful.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile:
Hello Everybody,
I have no problems at all with Oracle+RMAN+TDPO+TSM environment. I have:
1) dedicated nodes for database backups, separated from file system backups
(for example, LPAR05 for files and LPAR05_ORA for databases on logical
partition LPAR05);
2) dedicated management class and copy
. So if you have to
maintain 3 diff retentions per DB can you have multiple Recovery Windows
per DB in RMAN? Unfortunately we need a 21Day, 90Day and yes 10YR (I
know - recover what?)
Regards,
Charles
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu]
Hello Mehdi,
We are using TBMR 6.1.1 with WinPE under TSM Client 5.5.1 and TSM Server
5.5.1.1.
Do not mix with CBMR, because it is a little bit different.
It is very good and license cost is less than $1000.
See www.cristie.com for details.
Regards,
Grigori G. Solonovitch
Senior Technical Archit
TBMR supports disaster recovery for Windows servers (XP/2000/2003/2008) by:
1) install TSM Client and configure backups with VSS;
2) install TBMR and create initial TBMR configuration (C:\TBMRCFG directory);
3) run initial full backup for Windows server;
4) daily incremental backup for server (SYST
We were using TBMR 5.3.2 successfully for quite long time.
We have upgraded to TBMR 6.1.1 recently.
TBMR is not working with TSM Client 6.1. New release for TSM Client 6.1 is
expected soon.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East
Yes, of course. It does not matter where TSM Server is. In our environment we
have TSM Server under AIX 5.3.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g
Hi,
I have installed TSM Client 6.1 on a few Windows 2003 SP2 servers (32 and 64
bit) successfully. Clients are working fine.
If you have this problem during 1st start of client:
1) deinstall client;
2) reboot server;
3) install TSM Client again.
Regards,
Grigori G. Solonovitch
Senior Technical
Hello Everybody,
I am testing TSM 6.1 under AIX.
I have tried to enable de-duplication for primary disk pool:
tsm: BKME>upd stg daily_1 dedup=y
ANR2344E UPDATE STGPOOL: The "DEDUPLICATE" option is not valid for device class
DISK.
ANS8001I Return code 3.
tsm: BKME>
I have been affected too much by
for
DEVTYPE=DISK.
Thanks,
Colin
-
Colin Dawson
TSM Server Development
col...@us.ibm.com
From: Grigori Solonovitch
To: ADSM-L@VM.MARIST.EDU
Date: 04/29/2009 05:38 AM
Subject:[ADSM-L] TSM 6.1 deduplication is
Hello Everybody,
I am testing TSM 6.1 de-duplication in TSM Server 6.1 for AIX and TSM Client
6.1 for AIX.
After careful reading TSM Server Administration Guide, which is quite weak from
de-duplication point of view, I tried to test next scenario:
1. Environment preparation:
- define
Hello madunix,
TSM supports next ways to backup open files in Windows (depends on OS version):
1) Open File Support (OFM);
2) Logical Volume Snapshot Agent (LVSA);
3) Volume Shadow Copy (VSS);
4) Tivoli Data Protection for databases (to perform online database backups for
Oracle, MS SQL, Exchange,
I am trying to test de-duplication in TSM 6.1.
I have realized next things:
1) de-duplication is applicable to storage pool;
2) reclaim process for de-duplication is working on volume level (threshold is
for volume, not for storage pool).
In my opinion, this difference can create quite serious pro
You can safely ignore messages like this. It means only that file was removed
during backup and nothing else.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
I have query to TSM database which is working fine with TSM 5.5, but gives an
error in TSM 6.1:
tsm: BKME>select volume_name,state,location,upd_date from drmedia where
volume_name like 'TSM%' and voltype = 'DBBackup' order by volume_name
ANR2944E The reference 'ORDER' is an unknown SQL scalar fu
Thank you very much.
Is this problem fixed in TSM 6.1.1?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environmen
"schedmode prompted" in dsm.opt
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environment before printing this Em
Hello Everybody,
I have downloaded TSM 6.1.1 for AIX.
Link for installation guide "AIX, Linux and UNIX" from README.html gives:
"The page you requested cannot be displayed".
There is "500 Internal Server Error" for
http://www-01.ibm.com/support/docview.wss?uid=swg27015510
Could somebody help me
installation guide
On May 17, 2009, at 2:18 AM, Grigori Solonovitch wrote:
> ...
> Link for installation guide "AIX, Linux and UNIX" from README.html
> gives:
> "The page you requested cannot be displayed".
> There is "500 Internal Server Error" for htt
Hello David,
I am running TSM 5.5.1.1 with xlC 9.0 without any problems.
In addition, I have upgraded to xlC 9.0.08, which is required for TSM 6.1, and
found 5.5.1 working fine.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.
Hello Martin,
It is possible you are running backups to default management class (for
example, to backuppool), which has no volumes defined. I think, you need to
check type of backup data and Include/Exclude list carefully.
Regards,
Grigori G. Solonovitch
Senior Technical Architect
Information
Maybe this is simple hardware problem - volume sensor in slot is damaged?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consid
What is a "volume sensor in slot" in a 3583?
-H.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: 27. mai 2009 11:45
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Preventing TSM from using a certain library port
I think you need:
1) define dedicated management class for SYSTEMSTATE like MYSYS;
2) define copy group for MYSYS with required VERE;
3) add INCLUDE.SYSTEMSTATE MYSYS in appropriate place of dsm.opt.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Mi
You are completely right. It is much more difficult to install TSM 6.1 in
comparison with any previous version. Upgrade is going to be very painful and
long as well.
I have installed TSM 6.1 under AIX 5.3 - it is very unstable.
I have upgraded to TSM 6.1.1 - it looks a little bit better.
I am tes
ase I have been
"promised" to address a problem that was possibly introduced in 6.1.1.
I agree - way too unstable for production. Watch out for the hidden
storage/disk requirements plus the need for 3-FULL DB backups before it
purges archived transaction logs!
From:
Grigori Sol
TDP for Exchange is performing backup/restore for storage groups or databases.
To restore mailbox or individual message you have to use restore database to
recovery storage group and then use Exchange to move mailbox from RSG to
original database.
I think this is definitely supported by TDPE 5.5
I am using RMAN 9i/10g with TSM 5.5 successfully.
RMAN manages data expiry for Oracle databases completely without any manual
intervention, but some configuration efforts are required:
1) dedicated TSM node for Oracle data with management class and copy group;
2) set vere=no limit, verd=0 rete= r
I agreed completely with "that .". I have tried to use ISC a few times
with no success.
I was using TSM WEB Interface 5.2, which was announced by IBM as a temporary
solution for TSM 5.3, with TSM 5.4 and TSM 5.5 successfully. I addition, I am
using command line interface dsmadmc.
I wonder,
Manager"
I understand that rman CAN automatically delete old backups. As a TSM
Admin, I am being asked to verify that rman IS deleting old backups. Is
there any way to verify such from the TSM side?
David
>>> Grigori Solonovitch 6/4/2009 1:42 AM >>>
I am using RMAN 9i/
To restore single datafile (no database recovery):
---
#!/bin/sh
#
# Restore datafile for specified database
#
# Input parameters:
# 1 - database SID;
# 2 - datafile name.
#
export ORACLE_SID=$1
export ORACLE_HOME=`grep "$1:" /etc/
Please check space and write permissions in the directory with TSM Client log
files (DSM_LOG).
From: ADSM: Dist Stor Manager [ads...@vm.marist.edu] On Behalf Of John
Underdown [johnunderd...@synovus.com]
Sent: Sunday, June 28, 2009 4:13 PM
To: ADSM-L@VM.M
We have TSM 5.5.1.1 under AIX 5.3-09-02.
I would like to upgrade TSM to 5.5.3.0.
Are there any issues with this version? Is there somebody working with 5.5.3
under AIX?
I will deeply appreciate any comments or suggestions.
Thank you very much in advance.
Grigori G. Solonovitch
Senior Technical
Dear TSMers,
We have TSM 5.5.1.1 under AIX 5.3.
I need to move data from DISK primary storage pool (raw logical volumes) to
FILE primary storage pool (JFS2 file system).
There are 3 tape copy pools for DISK primary pool.
I am going to use next procedure:
1) create FILE primary storage pool with ap
In my opinion, the best software for disaster recovery of Windows servers is
TBMR from Cristie & TSM Client from IBM. It allows to make full/incremental
backups for SYSTEMSTATE, drive C: and other drives top TSM Server (with
point-in-time disaster recovery). We were using a few versions and now
I am using TSM 5.5.1 and PowerHA 5.5.0.2 (HACMP 5.5.0.2) without any visible
problems under AIX 5.3-09-02.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.s
Hello Tim,
I am using next script to restore database with incomplete recovery:
===
#!/bin/sh
#
# Restore specified database to point in time
# Recover database to specified time (incomplete recovery)
#
# Input paramaters:
# 1 - dat
that if a customer want to have a VTL but don't have any money to buy
a real VTL.
Best Regards
Christian Svensson
Cell: +46-70-325 1577
E-mail: christian.svens...@cristie.se
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.e
...@cat.com
Grigori Solonovitch
Sent by: "ADSM: Dist Stor Manager"
29/07/2009 06:37
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Move data from DISK pool to FILE pool
Caterpillar: Confidential Green Retain Until: 28/08/200
Unfortunately, I have no links to documentation. I have upgraded HACMP a few
months ago without checking TSM compatibility.
Why you are not asking IBM straight way?
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Pho
7400 Code: 331817
+ Email: steven.langd...@cat.com
Grigori Solonovitch
Sent by: "ADSM: Dist Stor Manager"
29/07/2009 08:40
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Move data from DISK pool to FILE pool
Caterpillar: C
Hello Mehdi,
There is no straight way migration from TSM 5.5 to TSM 6.1. During migration
main steps are:
1) install migration tool in TSM 5.5;
2) export database from TSM 5.5 by using migration tool;
3) create new TSM 6.1 instance;
4) import database into TSM 6.1.
Procedure is not easy and time c
It is included with TSM 6.1.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider the environment before printing this Email
I think your problem has no relationship with cash ratio:
" The database utilization is too high. 85.4 > 85 Consider a database space
trigger or increase the size of the database."
Just increase database size to have less than 85.
Cash ratio has to be as high as possible.
Grigori G. Solonovitch
S
Dear TSMAdmins,
We have TSM 5.5.3.0 under AIX 5.3-09-02.
Suddenly I have faced problem moving node data from DISK primary storage pool
to FILE storage pool on the same server:
1) it is impossible to use MOVE DATA, because it is working with volume
level and each DISK volume contains data of m
everything , didn't you need to move a specific
node only ??
Regards
Robert Ouzen
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Sunday, August 09, 2009 12:55 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Move
the copy FILE pool.
Good luck.
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
btchu...@leggmason.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Sunday, August 09, 2009 5:55 AM
To:
...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Monday, August 10, 2009 8:56 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Move node data from DISK primary storage pool to
FILE storage pool
Hello Bertaut,
FILE storage pool is a primary storage pool, not a copy storage pool.
MOVE DATA is
Please check access level for user, which is used in GUI user/password by:
q user f=d
This user should have "Client Access Privilege" on current host or "System
Privilege".
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme
August 12, 2009 1:48 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] NetApp restore 'This node cannot be selected'
Thanks for responding Grigori,
Indeed - the admin ID has full system privileges.
Anything else I can check?
On Wed, Aug 12, 2009 at 11:22 AM, Grigori Solonovitch <
12, 2009 at 11:52 AM, Grigori Solonovitch <
g.solonovi...@bkme.com> wrote:
> If you are accessing local node, I have no more ideas. But, if you are
> trying to access another nodes, you need to grant access by "set access ..."
> command from source node in dsmc.
>
> Gr
You need to put option file on disk used by Exchange server data (the same
resource group). In this case, option file will be moved by cluster together
with schedule service to another node. Of course, you need to specify new
location of option file in backup and restore scripts.
Grigori G. Sol
Thank you very much for information.
I have upgraded our test server from TSM 6.1.1 to TSM 6.1.2 successfully.
I have created scripts by scripts.smp as well.
I do not think that everything is fine in 6.1.2.
I couldn't explain next error message:
=
Hello Nicholas,
I have upgraded it straight way:
1) stop TSM Server;
2) run installation from 6.1.2;
3) start TSM Server.
Everything is looking fine after upgrade.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone
Dear TSMAdmins,
I have faced next problem in TSM Server 5.5.3 under AIX 5.3:
tsm: BKME>query nodegroup LPAR07_GROUP f=d
Node Group Name Node Group DescriptionLast Update by Last Update
Node Group Member(s)
:
LPAR07_GROUP is not a collocggroup. It is a nodegroup.
To view the "Collocation group", run "q COLLOCGROUP "
On Wed, Aug 26, 2009 at 6:51 AM, Grigori Solonovitch wrote:
> Dear TSMAdmins,
> I have faced next problem in TSM Server 5.5.3 under AIX 5.3:
>
> tsm: BKME
Hello Stefan,
I do not think you can use client compression and de-duplication together.
De-duplication is skipping all data compressed by TSM Client or TSM Server.
By the way, de-duplication process is trying to reduce files, compressed by
operating system (for example, *.Z, *.zip, AIX system ima
Schneider
The Computer Coaching Community, LLC
Office: (314) 635-5424 / Toll Free: (866) 796-9226
Cell: (314) 750-8721
Original Message
Subject: Re: [ADSM-L] Seeking wisdom on dedupe..filepool file size
client compression and reclaims
From: Grigori Solonovitch
Date: Sun, Augus
Wolfgang wrote:
>Now my long term averages are in: for the "interesting" (V5.5) TSM servers
>around here, the "Log Consumption" ranges from 5000 to 9000 MB/day.
>So, does this tell me anything about future (V6) Log Space requirements?
I have test database 6.1.2 and I think:
1) you need additional
e the
translogs/archtranslogs are purged/reset. I too ran into the log
overflow/blew out 300GB of archtranslog space/filesystem and had to move
it to a 1TB disk to hopefully prevent this from happening again, as well
as performing 3-daily FULL DB backups.
From:
Grigori Solonovitch
To:
ADSM-L@VM.MARIST.EDU
D
I think you need to stop and remove TSM services before removing directory.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please cons
Please try to add next lines in opt file
TDPO_TRACE_FLAGS ORCLEVEL0
TDPO_TRACE_FILE /usr/tivoli/tsm/client/oracle/bin64/tdpo.trc
to have trace file. It is better to touch trace file before backup and check
write permissions for Oracle HOME owner.
Grigori G. Solonovitch
Senior Technical A
I think you just need to start TDP for Mail on other server. Number of licenses
will be increase on TSM Server. Maybe I am wrong, but this is only for audit.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+9
Dear TSM Admins,
I have found one a little bit strange thing. I have Windows 2003 servers in
each branch with the same hardware and software.
We are using TSM Client to backup these servers for a long time. With TSM
Client 5.5.1 we have approximately the same status for all the branches.
We have
do.
Who told you that and why?
Best Regards
Christian Svensson
Cell: +46-70-325 1577
E-mail: christian.svens...@cristie.se
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Grigori
Solonovitch [g.solonovi...@bkme
ian Svensson
Cell: +46-70-325 1577
E-mail: christian.svens...@cristie.se
Skype: cristie.christian.svensson
Från: ADSM: Dist Stor Manager [ads...@vm.marist.edu] för Grigori
Solonovitch [g.solonovi...@bkme.com]
Skickat: den 27 september 2009 08:18
Till: ADSM-L
You need to run at least 2 full backups to clean the both log and arc
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: g.solonovi...@bkme.com
Please consider t
Hello TSMAdmins,
I have reported problem to IBM.
This is a result of partial investigation:
...
--
Env.: Windows 2003 servers -> upgrade from 5.5.1 to 6.1.0
--
Prb.:
After upgrade from 5.5.1 to 6.1.0 systemstate backup is significantl
Hello Everybody,
I have small problem, but I couldn't resolve it myself.
There is batch file to backup one of the Windows servers. From command line on
the server I am able to run batch as:
"C:\Inetpub\ftproot\BKME KOC FTP\Usr\root\CBMR\scripts\Daily.bat"
>"C:\Inetpub\ftproot\BKME KOC FTP\Usr\r
Command fails in CMD mode, if I put
"C:\.".
It is not working from scheduler as well.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 M
Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Grigori Solonovitch
Sent: Tuesday, October 06, 2009 5:17 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Objects for schedule COMMAND for Windows
Hello Everybody,
I have small problem, but I couldn't re
C:\inetpub\ftproot\BKMEKO~1\usr\root\cbmr\logs\tsm_daily.log
This is what we do with our SQL TDP scipts and it will keep you from
having to deal with double quotes.
See Ya'
Howard
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf
> Of
Of course, you need MPIO for fiber optics tape drives. It is not only high
availability. It is better performance as well.
Grigori G. Solonovitch
Senior Technical Architect
Information Technology Bank of Kuwait and Middle East http://www.bkme.com
Phone: (+965) 2231-2274 Mobile: (+965) 99798
Hello Everybody,
I have TSM Server 5.5.3.0 under AIX 5.3.
"select * from options" gives:
OPTION_NAME: DateFormat
OPTION_VALUE: ?
OPTION_NAME: TimeFormat
OPTION_VALUE: ?
OPTION_NAME: NumberFormat
OPTION_VALUE: ?
I have in dsmserv.opt file:
DATEformat 1
TIMEformat 1
NUMberformat 1
I do not
1 - 100 of 468 matches
Mail list logo
