Hi Phillip,
You're absolutely right in you assertion : you effectively have to give
an answer for each ejected tape, but a simple shell script could make
your life much easier, like this one, that queries TSM server to find
out what reply it has to issue, and then responds with correct value.
CM
Netscape 4.78 is 8-th modification of 4.7 (4.7.8). Version 4.7 is
unmodified (i.e. 4.7.0).
And if you look at Bonus Pack CDs which come with AIX 4.3.3 you will find
there both Netscape 4.7x (depends on release date of Bonus Pack) and JRE
1.3. They are ready for installation with smitty/installp.
There ought to be nothing special. Examine carefully the place where TR
"has a crossing" to Eth. TR is using larger MTU (4200 bytes by default,
max 17000+something).
- IP packet reassembly might have problems on TSM server side (IP packets
on 4200-byte TR frames will be fragmented to 1500-byte Eth
How do you achieve to create a schedule for every last sunday of the month?
(there could be 4 or 5 sundays??)
Regards,
Burak
Hi fellow TSMers
Does anyone know if it is possible to un-register a license. I added one by
mistake and would like to get rid of it.
Thanks in advance
Farren Minns - TSM & Solaris System Admin - John Wiley and Sons
**
Hello,
register again 0 licenses!
MfG
Sascha Bräuning
Sparkassen Informatik, Fellbach
OrgEinheit: 6322
Wilhelm-Pfitzer Str. 1
70736 Fellbach
Telefon: (0711) 5722-2144
Telefax: (0711) 5722-1630
Mailadr.: [EMAIL PROTECTED]
Hi TSMers,
Please can you assist me, we doing drp test and have loaded TSM 4.2.1 on the
NT server and when we try to initialise the TSM server we get the following
error:-
ANR0252E Error writing logical page 452608 (physical page 452864) to
database volume F:\TSMDATA\SERVER1\DB2.DSM.
ANRD db
Thanks, I was thinking about doing something like that but had not gotten
around to it. I will give it a try - thanks again. P.S. I still feel that
the command "move drm remove=untileefull" works wrong!!
--
Phillip
-Original Message-
From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED
I do it for the last Friday of the month. I do it by using the TZ variable
and number of hours for a week (168, 24 hours by 7 days). My script is
made to run on Friday only (every Friday). I get the current month(cm) and
I get next weeks Friday's month with the following for central time:
cm=
Can anyone tell me if there is a way to search the TSM database and find a
specific file and what server it existed on?
I have some legal requirements to restore a file and my admins don't know
what server it was on.
"Zlatko Krastev" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 08/18/2002 08:14:58
P
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Burak Demircan
> How do you achieve to create a schedule for every last sunday of
> the month?
> (there could be 4 or 5 sundays??)
Use cron or the Windows scheduler service. There isn't any way to do it with
the TSM scheduler.
If you get an answer to this let me know, but we use the account log and
bring it into an SQL database base and create our own output.
Kevin.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Herrera, Mayda I.
Sent: Friday, August 16, 2002 12:18 PM
How?
I don't mind being corrected, everyone knows I'm no "expert" at TSM. If your
going to correct me, at least show me the correct method.
Also, is a fileset the same as a filespace.
Thanks,
Mark
-Original Message-
From: Mark Stapleton [mailto:[EMAIL PROTECTED]]
Sent: Sunday, August 1
Delete corresponding rows by hand from nodelock file which resides in
server directory.
Zlatko Krastev
IT Consultant
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject:Rem
We take an extra monthly backup of our exchange servers. The last Saturday
of each month. We do it with this schedule:
tsm: FSPHNSM1>q sched server exch_monthly f=d
Policy Domain Name: SERVER
Schedule Name: EXCH_MONTHLY
Description: Exchange Monthl
1) Is this client associated with other schedules as well?
2) what is client platform?
3) Are you using POLLING or PROMPTED scheduling?
If you're not sure:
Start the client
Select EDIT -> Preferences
Click the SCHEDULER item
That window will say either POLLING or PROMPTED.
-Original Me
select node_name, hl_name, ll_name, backup_date from backups where ll_name =
'.x'
This will search the entire backup table.
hl_name is the path, ll_name is the filename only.
If this is a Windoze box, the filename should be ALL UPPER CASE.
If an *IX client, the filename should be mix
Hi list,
I have to upgrade my TSM Server and clients from 4.1 to 5.1. The new
server, TSM 5.1, will be running on a different machine under Windows 2000
Server. The old one is now running on a Windows NT Server system. My
storage unit is a IBM 3590 tape library (SCSI connected). The TSM 4.1
datab
Hi TSMers,
Please can you assist me. How can I go about upgrading my tsm server from
4.2.1 to 5.1 without any glitches ?
Our config is as follows:-
TSM server : 4.2.1
O/S : Windows NT4 SP6a
Devices : Magstar 3570 library, IBM 3583 (L18) library
Yes, Step 4 is to CYA. Tape isn't 100% foolproof for data retention, and
the closer you get to Forever, the less stable it will be, so having two
copies would help ensure you have the data should a request be made for it
in the future.
Let's use an imaginary media called Tangwort. If you say th
John,
I think that would work if your period is "4 Weeks" (or "28 Days") rather
than "1 Month." If I remember correctly, the period count doesn't start
until the schedule runs, so, with that change to what you have, 4 weeks
after your schedule ran, it will be eligible to run again, sometime with
Hello all,
We have a win2k file server here running 4.2 that we have been doing
incrementals on for months with journaling enabled and had no problems until
recently. The error listed above outputs almost immediately after the
initial run of it. We then rerun it (through a 3rd party scheduler) a
Hi,
This is from the Unix Tip of the Day from Unix.ugu:
RUN ON LAST SUNDAY
If you want a job to run on the last
Sunday of every month, you can use
the following syntax from within cron:
18 * * * 0 [`date "+%d"` -gt 24] && /path/to/script
i.e. on sundays at 18:00 check if
the day of the month
I am doing a DR test, and trying to restore a NT 4.0 svc pack 6a server test
machine.
We have done the following:
1. installed NT 4.0
2. installed service pack 6a
3. installed tsm client (4.1.3.0)
Server is running 5.1.0.0
When I run a restore to restore the files we get a Dr.Watson error
from
Are the Domino servers using "Archive" logging or
Cirrcular?
--- Marc Lowers <[EMAIL PROTECTED]> wrote:
> What would cause the 'database not latest version'
> error message to appear
> during a TDP restore? The dates I enter are the
> same for both the
> restore and the application of trans logs
I should have added that the first thing I do when opening the WebAdmin is
open the command line with it. Do the same when I change the TCPPort for
diagnostic reasons. It has a few other good features, such as bringing a PATH
back online.
Quoting Zlatko Krastev <[EMAIL PROTECTED]>:
> Yes, but
Hi,
When I try to use Parallel backup paths for TDP R/3, I receive the following
error message when trying to connect to the same TSM server on two different
Network Adapters:
Tivoli Data Protection for R/3
Interface between SAPDBA Utilities and Tivoli Storage Ma
This is Windows. How long has it been since you rebooted the file server?
- Kai.
> -Original Message-
> From: Rob Hefty [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 19 August 2002 11:20 AM
> To: [EMAIL PROTECTED]
> Subject: ANS1075E : Program Memory Exhausted
>
>
> Hello all,
> We have a w
Please check fro memory leaks. Patches on OS and TSM Side will do.
But If applications that run don't have proper patch levels then this can
cause the problem
If its Unix u can fix it to run crush cmd every 5 min in crontab.
Hope this helps.
Balanand Pinni
SBC Services Inc.
Work:314-206-5911
Pa
Rob didn't mention the client version he is using. But the problem you are
referring to (IC32797) was fixed in 4.2.2 and 5.1.1 (it still exists in
5.1.0).
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBM
There's been some history of the TSM scheduler allocating then not freeing
memory; maybe try using managed services (with polling mode), so the
scheduler is periodically launched (and exits) from dsmcad... see the Using
Clients book.
Also, check your virtual memory settings; you may have so man
1. Never run from the virgin CD-release -- always check this list for
issues not documented in the README files;
2. Read (completely) and follow instructions in the README files and
QUICK-Start manual -- it's all laid out there, just gotta read (and know
what you are reading!).
For 5.1.x, 5.1.1
Hi everyone,
I have two TSM 5.1 servers on AIX 5.1, sharing an LTO 3584 over a SAN. One
server is defined as the Library Manager and the other is defined as the
Library Client. When I try to backup a client node that is registered to
the Library Client to tape, I get the following error messages
Nice call, Andy; thanx, for the update.
Don France
Technical Architect -- Tivoli Certified Consultant
Tivoli Storage Manager, WinNT/2K, AIX/Unix, OS/390
San Jose, Ca
(408) 257-3037
mailto:[EMAIL PROTECTED]
Professional Association of Contract Employees
(P.A.C.E. -- www.pacepros.com)
-Ori
We installed a second instance of TSM today, and moved a drive over to the
new instance for testing purposes, and I have a few questions that I hope
someone can answer.
1) Does the new instance have to have its own library, or can it share the
existing library. We currently have 2 TSM libraries a
The fix for SumTab bytes transferred is in 5.1.1.1 (not .5 -- I got .5 on
the brain, for some reason). 5.1.1.1 was released around 01-July, so would
be my minimum level recommendation for a 5.1 shop.
Don France
Technical Architect -- Tivoli Certified Consultant
Tivoli Storage Manager, WinNT/2K
36 matches
Mail list logo
