Helo!
Does someone know why I receive the message 8778w? All tapes change of
scartch mode to private mode. I Think that those tapes will not be to
available fot realize backup.
Thanks at all replys!
Regards.
Luis,
the TSM Messages Manual has this description for ANR8778W:
###
ANR8778W Scratch volume volume name changed to Private Status to prevent
re-access.
Explanation: The scratch volume encountered an error during mount
processing that makes it unusable. The
st
Does anybody know a quick and complete guide for DRM? Do you recommend
a book or some tips?
Best Regards,
Burak Demircan
I am reminded of what one of my old managers used to say:
"Good, Fast, Cheap: pick any two."
Anyway, the only TSM DRM guide I've found is the one in the back of the TSM
Admin Guide. This is rather lacking in Bare Metal Restore info for the
various platforms, but that's not so hard to find.
Anybody can help me with this :
I 'm using an IBM Ultrium tape library with 7 tapes.
A few weeks ago my first set of tapes were full so I got another set of 7
and checked them in TSM. All worked fine.
Now the second set is full and I need to reuse the first set for backups.
TSM will not allow me t
1. Try running the preschedule command manually, to see if works.
you might need to add a pause statement to keep the command
window on the screen long enough to read any messages.
2. Make sure that the scheduler is running under an account that
has enough rights and permissions to ca
Be prepared for tivoli to tell you you are working with a version (3.7)
that is no longer supported.
"Prather, Wanda" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 12/26/2001
04:54:25 PM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTE
I think that you have to make " delete volume x discardata=no wait=yes "
Angelos Loizou <[EMAIL PROTECTED]> con fecha 27/12/2001 15:17:18
Por favor, responda a "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Destinatarios: [EMAIL PROTECTED]
CC: (cci: Juan Manuel Lopez Azaqon/NATION
Angelos,
I guess you haven't read much about TSM and in the past you worked with
other backup solutions. Your question is not uncommon, why should one
think TSM has a different internal behaviour and tape management than
other products...
I can't give you a complete introdution in a few lines, I'
My dsm.sys file contains the following:
SErvername sertitsm
SCHEDLOGRETENTION 10
SCHEDMODE POLLING
QUERYSCHEDPERIOD 6
MANAGEDSERVICES WEBCLIENT SCHEDULE
COMMMETHOD SHAREDMEM
*TCPPort150 0
* TCPServeraddress 192.168.192.13
passwordaccess generate
shmport 1510
And
"delete vol xx discarddata=yes"
This will delete references to the data on a tape and return the tape to
scratch. I hope you are running full backups on a regular basis if you are
going to delete backups after less than 2 weeks. P.S. Check your versions
and retention settings too.
-Origin
Hello Ya'all
I am trying to do a bare metal restore of an IRIX 6.5 tsm 4.2 client.
I have booted off the irix install cd, and tftp'd over the dsmc module, but
when I run dsmc I get:
2109:dsmc: rld: Fatal Error: Cannot Successfully map soname 'libdm.so'
under any of the filenames
/usr/lib32/libd
I have a user who ants to box up a box running OPEN BSD. The closest I
could find in the archives was a solution for FREE BSD. The user checked
this out but found it used a cleint no longer available. Has anyone out
there found a way to do this??
Paul,
I remember this same topic being discussed several months ago... I thought
it was impossible... how can the library move the slider on the cartridge!?
We have a P3000 and have never seen this happen. I don't remember the
resolution from that last discussion (or if there was one)... but I'l
Hello,
I am writing some tsm 4.2 recovery instructions for irix 6.5.
I boot off the irix install cdrom, and then go to a shell, where I then tftp
"dsmc" and the license file over.
BUT when I try to run dsmc it says it cannot map soname to libdm.so to any
filenames.
Does anyone have any inp
This identifies the shares that I mount. It does not identify the shares I
let others see, which is the problem here.
_
William Mansfield
Senior Consultant
Solution Technology, Inc
630 718 4238
Dylan Ryback
Found a Microsoft KB article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q125996
_
William Mansfield
Senior Consultant
Solution Technology, Inc
Dylan Ryback
cc:
Sent by:
I was looking thru the BMR (Bare Metal Restore) documents on the
Kernal Groups web site. Since the BMR architecture (three of its
own servers) seems to be
external to the TSM server, is there something that makes TSM
4.2 a required level to use BMR?
Ron Greve
SDSU Computing Services
Then you could use Reg.exe (from the NT Resource Kit) or 'regedit /e' at the command
line to export 'HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Shares' to a flat
file for documentation purposes.
Original Message:
-
From: Bill Mansfield [EMAIL PROTECTED]
Date: Thu, 27 De
BMR is a separate 3rd party product that The Kernel Group developed in
conjunction with IBM/Tivoli. BMR is a great product that provides the
ability to perform bare-metal restores of systems. I do not think there
is a required level of TSM 4.2 that would need to be applied in order to
run BMR.
SEEN THIS BEFORE.
You have to install the SGI DMI X-OPEN API and reboot. All the problems
will go away then. There is a direct hit on this problem on the SGI website
if you use the keyword "libdm" if I remember correctly.
Stay in touch, we have some SGI systems with over 1TB on them.
-Ori
Sorry, I am taking my words back. Have a look again at the times reported
Data transfer time: 8 261.61 sec
Elapsed processing time: 01:25:00
This 8261 seconds is definitely much more than 1h25m (5100s) and one of the
times is erroneous. Divided by wrong value you're getting one of the rates
wrong.
Jerry,
this would turn TSM into "always full backup" destroying nearly all of its
benefits (and will not resolve the problem). I would recommend to both you
and Angelos to read the nice redbook "Tivoli Storage Management Concepts"
(SG24-4877-02 from http://www.redbooks.ibm.com/). This would allow
I do not know will this work in ADSM 3.1 (but it ought to). At least it
works in my TSM 4.1.
1. (optional) Format log volume files - if on Windows or prefer to use
files instead of raw devices
2. Mirror the volume(s) in question using "DEFine LOGCopy" command (in my
test "def logc /dev/rtsm_log0 /
The other meaning for "backup window" is the time period during which you
need to complete the backup. For example server is very busy during
business hours so backup can be performed only during the night. Or if
server is accessed from both Europe and Americas offices of the company
backup window
I also remeber such problem so have searched through my mail list archive
folder and really found a thread "P2000 questions" on 14.09 started by ...
"Coviello, Paul" <[EMAIL PROTECTED]> and answered by ... Robin Sharpe
<[EMAIL PROTECTED]> :-)))
And guess what - the subject was slightly different b
26 matches
Mail list logo
