Alex, thank you very much for your suggestion.
Our goal is in fact LAN-free so if this is possible, it might help.
I have a doubt about what will happen with the metadata information that
goes to the server through the net.
Will this work if the connection between server and client is through the
Hello, does anybody knows how to find explanation for message ANS1194E, i
tried help in dsmadmc and dsmc. Nothing in manual GC35-0271-04.
Thanks,
René Lambelet
Nestec S.A. / Informatique du Centre
55, av. Nestlé CH-1800 Vevey (Switzerland)
*+41(021) 924 3543 7 +41 (021) 924 4589 * B 133
Vis
HI !!!
Specifying the schedule log 'link' is a simbolic link is not allowed.
Schedule log 'linkname' cannot be a simbolic link.
check the location of the new schedule log. To specify the location of the
schedule log.
Alessio Prodon
"Lambelet,Rene,VEVEY,FC-SIL/INF." <[EMAIL PROTECTED]> il
I believe it is show volumeusage...
you have to type out the whole word
-Original Message-
From: Nancy Reeves [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 02, 2000 5:47 PM
To: [EMAIL PROTECTED]
Subject: Re: Tapes needed for a restore
Since Kent's preview approach doesn't work for m
>Solaris 2.6 5/98, ADSM 3.1.2.20 Server - After a night of successful backups to
>the primary disk pool, during a morning Migration to tape my ADSM server began
>reporting read-errors from a specific diskpool volume...
...
>I cancelled the process in Step 1 after it had listed over 1000 damaged fi
>Hello, does anybody knows how to find explanation for message ANS1194E,
>i tried help in dsmadmc and dsmc. Nothing in manual GC35-0271-04.
Rene - It's in the 4.1 messages manual, at
http://www.tivoli.com/support/storage_mgr/pubs/admanual.htm .
Richard
Hi Nancy.
There is a select statement that you can use, but normally gives a long
list of tapes(especially if you are not using collocation). This "query"
can be narrowed down if you know the filespace name linked with the
file/directory to be restored.
select volume_name,filespace_name fro
HI !!!
Specifying the schedule log 'link' is a simbolic link is not allowed.
Schedule log 'linkname' cannot be a simbolic link.
check the location of the new schedule log. To specify the location of the
schedule log.
Alessio Prodon
"Lambelet,Rene,VEVEY,FC-SIL/INF." <[EMAIL PROTECTED]> il
Session established with server BACKUP: AIX-RS/6000
Server Version 3, Release 7, Level 2.0
Server date/time: 10/03/00 08:27:08 Last access: 10/03/00 07:58:51
adsm> q show volusage clarkl
ANR2000E Unknown command - QUERY SHOW.
ANS8001I Return code 2.
>>> [EMAIL PROTECTED] 10/02/00 04:3
Hi,
I'm running scheduled command on two Notes server. The command stops the
Notes server, runs an incremental backup of the server, and then reboot.
The return code of the command, in the dsmsched.log is 0, but in the
events' list on the server, it is marked as failed.
Apparently, the scheduled
Hello, is there anyway to get information about the data you have backed up. I mean
how many gb you have backed up from an NT, from all NT's, from an Unix, etc.
I'm running ADSM 3.1.2.50 on an OS/390 Server.
Best Regards
A. Antón
All,
There is a new command by TSM under 3.7.3.5 called "untilee=full".
This was recently created for Marriott a couple of months ago by Tivoli.
It should allow you to check out tapes into the bulk I/O. Upon a full door
it will stop processing. You will then have to re-execute the scrip
Hi: The select mentioned previously work, except add a distinct after the select to
just show a volume once.
adsm> select distinct node_name,volume_name,stgpool_name from volumeusage where
node_name='CLARKL'
NODE_NAME VOLUME_NAMESTGPOOL_NAME
--
Hi:
It may returned failed if the backup completed past its 'window'
>>> [EMAIL PROTECTED] 10/03/00 08:25AM >>>
Hi,
I'm running scheduled command on two Notes server. The command stops the
Notes server, runs an incremental backup of the server, and then reboot.
The return code of the command, i
If you have accounting turned on, you can use the dsmaccnt.log file.
Bill Sherrill
Analyst International
"Anton Herrero, Angel" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 10/03/2000
09:06:49 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMA
Derwin Abraham
ADSM Storage Management
IBM Global Services South
(919) 543-8693 t/l 441-8693
[EMAIL PROTECTED]
Len's note brings up an interesting question for our OS/390 environment.
We're currently running OS/390 2.6 with plans to install 2.10 by end of 1st qtr.
'01. Our ADSM is currently 3.1.2.50. Our original plan was to upgrade to TSM
4.1.x by the end of the yr. However, if 2.10 ships with 3.7.? we
the correct usage is...
show volumeusage clarkl
-Original Message-
From: Lawrence Clark [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 8:21 AM
To: [EMAIL PROTECTED]
Subject: Re: Tapes needed for a restore
Session established with server BACKUP: AIX-RS/6000
Server Versio
Hello:
I am currently looking into unloading and reloading our TSM database. My
database has not been unloaded or reloaded since we installed ADSM in 1995,
and the database has grown from 6gb to 32 gb. My environment is a UNIX TSM
3.7.3 server running on a 7017-S80, 12 processors and 8gb of memo
Are you really rebooting the client? Wouldn't that sever the communication
connection between the client and server and possibly prevent the sending
of a completion message back to the server? Wouldn't that cause the server
to think that the scheduled command had failed? Try changing the reboot
st
apples - organges = bananas
What I mean by this is your method is flawed. You can't rely on numbers from
TSM (selects) and numbers from the 3494 (mtlib) to mean the same things.
For example: you did not consider tapes in INSERT mode in the 3494. They indeed
take up space but are niether private
>I am currently looking into unloading and reloading our TSM database. My
>database has not been unloaded or reloaded since we installed ADSM in 1995,
>and the database has grown from 6gb to 32 gb.
Monte - This issue was discussed on the list about 10 days ago, so see
the archives for in
Anyone help me with "Show Version" command . I cannot find information about this
command.
Any Help appreciated.
Thanks in Advance.
Ricardo Negrete
Ingeniero de Sistemas
[EMAIL PROTECTED]
Cientec Integración S.A.
Santiago - Chile
The Sun StorEdge L20 isn't an HP library. I believe it is a StorageTek
OEMed library and should work even though it is not on the supported
devices list.
--
Joshua S. Bassi
Senior Technical Consultant
Symatrix Technology, Inc.
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor
>Anyone help me with "Show Version" command . I cannot find information
>about this command.
Ricardo - That's intentional: the Show commands are for developer and
support personnel to pursue problem areas, and not for
customers to poke around. Some of them can run a long time and impo
That's the ticket! Thanks everyone. I am also educating myself more on the
select command. It is new to me.
Also, using 'volumeusage' instead of 'volusage' works with show.
Thanks again!
Nancy Reeves
Technical Support, Wichita State University
[EMAIL PROTECTED]
Lawrence Clark <[EMAIL PROTEC
Hi All,
Just wanted to confirm if this is what is actually happening within my
Library as i'm planning on our capacity.
Daily Data backups are around 15G
Backup of Storage Pools doubles the amount to 30G
Plus one tape for database backup ..
By the end of the day... i have used up 7-10 tapes
Hi Ricardo,
look this:
COMMAND PARAMETERS
----
Show version
RESULT:
---
Shows filespace, path, name, mgmnt class, & status info (node: from a QUERY
NODE) (filespace: from a QUERY FILESPACE )
Saludos...
Claudio Cofré Caro
S&A Consultores - Chile
Ricardo Negre
See the attached Excel spread sheet for info on the "show version" along
with other nifty commands
later,
Dwight
-Original Message-
From: Ricardo Negrete [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 10:00 AM
To: [EMAIL PROTECTED]
Subject: Show Version
Anyone help me with
Hi there ,
Has someone implemented this.. for any of their servers being backed up..
if so, please let me know on what should i doing to accomplish this..
thanks in advance
Will Exchange 2000 TDP allow for individual Mailbox restore ?
Mehdi Amini
ValueOptions, MIS/LAN
703-208-8754 - Voice
703-205-6879 - Fax
**
This email and any files transmitted with it are confidential
and intended solely f
Hi All,
Please let me know how many sessions are allowed at one time with these
parameters in place
Maximum Sessions: 95
Maximum Scheduled Sessions: 65
Schedule Randomization Percentage: 25
Thanks in advance
>Anyone help me with "Show Version" command . I cannot find information
about this command.
show version
Regards,
Leos Stehlik, IT Specialist
AIX, ADSM/TSM
IBM Czech republic
Yes, and Richard Sims posted an excellent script here last week which well
help read the data-rich dsmaccnt file.
Daniel Swan
HP Unix Team
ISM-BC
3030 2nd Ave SE
Calgary, AB, T2A 5N7
ph. 403-530-1726
fax: 403-530-1066
> -Original Message-
> From: Anton Herrero, Angel [SMTP:[EMAIL PRO
The following is copied from the Windows NT V.3.7 Admin guide
Periodically the database size and internal organization can develop to where
it is no
longer internally efficient. To improve database performance, the database can
be
unloaded and re-loaded in an optimal manner that will:
Improve th
It could be that the backup took longer than it's assigned duration... this
one always annoys me, as it sends the managers into a frenzy when they get
their reports. I'd much rather it say 'warning' or some such thing.
Daniel Swan
HP Unix Team
ISM-BC
3030 2nd Ave SE
Calgary, AB, T2A 5N7
ph. 40
A couple of days ago I asked for help deleting informix logs backed
up with onbar. Several people suggested that I download the expire
program by Christoph Martin. I got the source, and it compiled
cleanly, but I'm not having any luck running it. Can someone familiar
with the API give me a pointer
For those who like visual data, the use of gdChart is quite helpful. We
nightly ncftp our accouting files (and then filter to 100 days) and the
data is available via a simple HTML form based query. Three Perl scripts
do the actual charting (based on intervals and such). It's very useful.
I can
This is something that I too must deal with. The need is to create recovery
instructions for all servers being backed up to TSM. We have well over 100
servers that need to have data collected.
My first thought is to enlist/solicit the input of all the server admins.
Some will cooperate and some w
Here is something from the archives I've dug up.
Jack
--
This question was also asked at Microsoft Exchange Conference '99
and Microsoft addressed it by saying that they hold their
position to NOT introduce it into the "backup and restore" API
because of performance issues an
Hi:
Just tried the upgrade to the client TSM 3.7 on the AIX side and get:
[backup] /etc # /usr/tivoli/tsm/client/ba/bin/dsmc sched
ANS1035S Options file '/usr/tivoli/tsm/client/ba/bin/dsm.sys' not found
I assume it's looking for the dsm.opt file. It is in the bin directory, but it appears
to hav
Under the Unix clients there are 2 files that are nessasary. You need both
the dsm.sys and the dsm.opt. At a minimum you'll need the server name in
the dsm.sys on all Unix clients.
The reasoning behind it all is because Unix is a multiuser system unlike NT.
Each user could customize thier own d
Mehdi,
The procedure for restoring a mailbox within Exchange 2000 will be
to restore the database within the Storage Group that contains the mailbox.
If you are asking about brick-level backup and restore. Then no.
In fact, a Microsoft Exchange project manager was asked about
when the Microsoft
Can someone please explain to me how this parameter works and is this
connected somehow to the no.of versions kept in the database..?
Thanks in Advance
Hi Selva.
After a volumen reachs a 0% of use by some process like reclamation, its
status is set pending. Reuse delay indicates number of days tha a volumen
keeps status pending. After, volume will be a scratch tape again.
Regards
Raul Giraldo Suarez
TSM Bancolombia
"Selva, Perpetua" <[EMA
Hello everyone,
I've hit a situation I've never encountered before. My TSM server(rs6000 70 v3.7 had
crashed yesterday. We restarted it and it comes backup but will not allow an sessions
to be established with it.
I'm getting ans1017e messages and ans8023e messages. Thes messages state there i
You should set your re-use delay to how many days you keep your database
backups. The idea is not to use a tape that, if you needed to restore your
database to today-n days, may still have valid data on it. TSM does not
erase a tape that has become scratch. Only the entries in the database are
rem
Top of message
>>--> 10-03-00 11:12 S.SHEPPARD (SHS)Re: Re-use Delay
Keeps the volume from being scratched, being written over, and then
having a disaster in which the server database is restored to a point in
time when the scrat
>The following is copied from the Windows NT V.3.7 Admin guide [chapter 18]
>
>Periodically the database size and internal organization can develop to where
>it is no longer internally efficient. To improve database performance, the
>database can be unloaded and re-loaded in an optimal manner that
I had a similar problem. We halted the server and couldn't get it to
completely load again. It hung loading the recovery log. Anyway, the
solution was to apply the latest fixtest (not released) from Tivoli. You can
find it on their FTP server.
Seth Forgosh
-Original Message-
From: James
Gidday there.
I'm running ADSM 3.1.2.50 on Solaris 2.6.
I originally backed up some files for a user to keep for 16 days and now
I'm advised they need to keep it for 40 days. I think I know the answer is
"no" but is it possible to extend the retention period for an archive
that's already been ta
Actually, Maria, I've never done it, and in fact, I don't even know if it
_can_ be done. I only vaguely recall reading something about it. I've been
considering researching it because it might solve some issues for us, but so
far I haven't had the time. I said "see if" because it would definite
Move the dsm.sys file from /usr/lpp/adsm/bin to that directory - should
work.
Andy
Lawrence Clark <[EMAIL PROTECTED]>@VM.MARIST.EDU> on
03/10/2000 17:58:36
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL
>I'm getting ans1017e messages and ans8023e messages.
Jim - The 8023 says you can't establish an admin session.
I would try starting the server interactively, in the
foreground, and see what Activity Log messages are produced.
You might also do an errpt to see if anything there, or if
a /ds
James,
you can kill & restart the TSM server -- sometimes this will get the
TCP/IP port back. Otherwise you need to reset the system.
Steffan
James Healy wrote:
>
> Hello everyone,
>
> I've hit a situation I've never encountered before. My TSM server(rs6000 70 v3.7 had
>crashed yesterday. We
On Tue, 3 Oct 2000, Andy Hynes wrote:
> Move the dsm.sys file from /usr/lpp/adsm/bin to that directory - should
> work.
Don't move itmake a link...
>
>
> Lawrence Clark <[EMAIL PROTECTED]>@VM.MARIST.EDU> on
> 03/10/2000 17:58:36
>
> Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECT
Since the listserv did not allow the attachment, I did the simple user
thing and did a quick build of a page. If you're interested in what
gdChart can do with the accounting data, check:
http://home.sprynet.com/~thfamily/index.html
Thanks,
David Hendrix
[EMAIL PROTECTED]
Daniel Swan/TM <[
You are correct !
look at it as a safety feature... if you could extend it, that would imply
being able to alter it in general which could lead to early deletion with a
reduction in duration.
Sooo you have to retrieve it and re-archive it with the retention they
really wanted to begin with :-(
lat
I had a very similar exprience (except I did a normal halt) and ended up
having to recycle the AIX system. With the server not running, ports 1500
and 1580 were showing in use (aix>netstat -a | grep 1500, if I remember
correctly), and my SysAdmin (who, in my opinion, sits at the right hand of
the
Have 3.7 TSM. Backup 45 servers. No collocation on tapes. Want to create a
special schedule where three of those servers run a quarterly backup to tape
and tape is sent off site. No other servers have offsite tapes. Looking
through all the GUI interface screens I cannot see how to do this. Any hel
Richard,
Well put.
When I wanted to distribute DB/log usage to include new volumes that I had just
added, I ensured that I had sufficient empty space on the new disks, then
deleted the DB and log vols from another disk. ADSM copied the data to the new
volumes on the new disks, effectively dist
Not really.
The storage pool tapes are usually not 100% full.
As different files have different numbers of backup versions, some of those
tapes have less and less good data; their %reclaimable value goes up over
time.
So you can't count on all the tapes in the library being 100% full.
I usually
We have been attempting to get SQL-BackTrack working with a TSM 3.7.0.0
client. The installation verification tests fail with a barrage of messages
about unresolved symbols and modules. I built the API sample program. When I
attempted to run the sample program it failed with a nearly identical bar
Look in the ADMIN COMMAND reference (for the server, not the client) at the
GENERATE BACKUPSET command.
I think that would be the best way to do what you want.
> -Original Message-
> From: Gies, Joanne [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, October 03, 2000 4:00 PM
> To: [EMAIL PROT
Thanks Seth,
I talked to tivoli and they gave me 3.7.3.6 and the server is now up and running but
why the crash out of no wher. I now have a huge core dump to pour over. Almost looks
like it was a memory allocation problem from early peeks at the dump. Anyone else hit
this and actually come u
An administrator for a Unix ADSM client came to me today with an odd request.
He has reason to believe that permissions on large numbers of files have been
altered, but thinks the contents of the files are intact. He wanted to know
whether there is a way to get information about permission bits an
Thank you. I shall check into that!
-Original Message-
From: Prather, Wanda [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 1:55 PM
To: [EMAIL PROTECTED]
Subject: Re: Offsite copy
Look in the ADMIN COMMAND reference (for the server, not the client) at the
GENERATE BACKUPSET c
Hi,
I am running ADSM server version 3.1 on the AS/400 and am having problems with
the server not retaining extra backup copies. It is keeping the set number of
versions correctly for both existing and deleted files, however I am not
retaining the extra backup copies for 30 days as we have it se
>An administrator for a Unix ADSM client came to me today with an odd request.
>He has reason to believe that permissions on large numbers of files have been
>altered, but thinks the contents of the files are intact. He wanted to know
>whether there is a way to get information about permission bit
Hello All
We have played around with bulk checkout in our library. We only have ten
recovery slots in our test library, single frame. What we did was have our
local IBM CE perform a teach to convert 20 internal slots to IO recovery
slots. This allows us to skip a day or two to remove any tapes
If all the archives are under the same archive copygroup, you can modify
retention of the corresponding archive copygroup. However, all other backup
archived via that archive copygroup will also be affected. So, retrieve and
archive them again is an alternative. Thanks.
Regards,
Eric Tang
So what is the purpose of having them set to that parameter.. I don't see
much use of it if it becomes scratch anyway..
-Original Message-
From: Raul Giraldo Suarez [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 03, 2000 1:48 PM
To: [EMAIL PROTECTED]
Subject: Re: Re-use Delay
Hi Selv
72 matches
Mail list logo
