ed to verify this will work in your environment.
Rick Saylor
Austin Community College
On 9/26/22 06:15, Loon, Eric van (ITOP DI) - KLM wrote:
Hi Andy,
The problem with using the q replnode command is that it always returns RC 0,
even if a replnode does not exist. I'm trying to create a sc
I would use the next storage pool method and let TSM/Spectrum Protect
move the data for you.
Rick Saylor
Austin Community College
On 8/7/2017 12:08 PM, rou...@univ.haifa.ac.il wrote:
Hi to all
I have a robot TS3200 LTO5 and made me a lot of problems . I acquire a brand
new TS3200 LTO7 with 4
Del,
Can you give us an rough idea of when or, more specifically, which
release of Spectrum Protect will no longer have virtual volume support?
Thanks,
Rick Saylor
Austin Community College
On 5/5/2017 5:41 AM, Del Hoobler wrote:
Hi Joerg,
The original purpose of virtual volumes was to
The 7.1.1.100 release had a bug where it would favor copy pool
volumes over local volumes for restores. This may not be an issue
unless you have copy pool volumes(virtual volumes) on a remote TSM
server like I do. To fix this issue IBM supplied me with 7.1.1.104
and I've been running it for severa
ic McWilliams
www.medsynergies.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
Behalf Of Rick Saylor
Sent: Monday, March 02, 2015 3:46 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] ANS4174E error
Did you activate the policyset?
I recently struggled with thi
Did you activate the policyset?
I recently struggled with this problem too. Setting up and
configuring TSM/VE is confusing. I've included the output from my
domain, policysets, mgmtclass and copy groups. I hope it will help
you figure out what is missing.
Rick Saylor
Austin Community Co
able then the restore did use the
primary pool volumes. But like you said how often do you get advanced
warning of restores? So, if you can wait, then install 7.1.1.200 when
it is released. However, if you have to upgrade for some reason, then
call IBM for the efix.
Rick Saylor
Austin Community College
646 opened input volume
A00397.
(SESSION:
5646)
Thanks,
Rick Saylor
Austin Community College
delete this e-mail and all attachments
from your e-mail system and your computer system and network; and
destroy any paper copies you may have in your possession. Thank you
for your cooperation.
--------
Rick Saylor
Make sure the status of the volumes in question is "Read/Write".
Also, issue query content against the empty volumes to make sure they
are really empty.
At 01:28 PM 4/16/2014, you wrote:
tsm: SXDCTSM01>q library xdcvtl f=d
Library Name: XDCVTL
Library Type
ess, click here to unsubscribe:
> http://pages.e.pnc.com/globalunsub/
> By unsubscribing to this message, you will be unsubscribed from all
> advertising or promotional messages from PNC. Removing your e-mail
> address from this mailing list will not affect your subscription to
&
test.log. `date
>'+%d.%m.%Y'` 2>&1" durunits=minutes duration=10 startt=now peru=o priority=1
>
>TSM server is 6.3.3.1 and runs under AIX .
>
>I already have tried various combinations of single and double
>quotes without success ...
>
>TIA.
>
>Cheers.
>
>Arnaud
Rick Saylor Austin Community College Voice: (512)223-1182
Director of System Services 9101 Tuscany Way Fax: (512)223-1211
Information Technology Austin, Texas 78754
erver is 6.3.3.1 and runs under AIX .
I already have tried various combinations of single and double
quotes without success ...
TIA.
Cheers.
Arnaud
----
Rick Saylor Austin Community College Voice: (
ebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
Behalf Of Rick Saylor
Sent: Wednesday, February 26, 2014 9:52 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Redundant Tape SAN
Andy,
What do you mean by "redundant tape san"? Multiple tape libraries
Andy,
What do you mean by "redundant tape san"? Multiple tape libraries at
the same or remote location? Tape drives with more than one fiber port?
Thanks,
Rick
At 08:19 AM 2/26/2014, you wrote:
Is anyone using redundant tape SAN with TSM on AIX?
Andy Huebner
--
|This was sent by bobpatrick808...@yahoo.fr via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
----
Rick Saylor
hat
the drives aren't being cleaned. As Rick notes, a drive that needs cleaning
should display a message on the drive display and in the web interface, too.
=Dave
On 09/13/2013 10:42 AM, Rick Saylor wrote:
Nick
My 3584 libraries are set to autoclean and I see these messages in
the AIX er
Nick
My 3584 libraries are set to autoclean and I see these messages in
the AIX error log and the act log also. Have you checked the display
on the drives(either physically looked or with the web client)? If
the drive needs cleaning it will display a message. Also, check the
cleaning cartridge(s)
mputacenter.com
**
--------
Rick Saylor Austin Community College Voice: (512)223-1182
Director of System Services 9101 Tuscany Way Fax: (512)223-1211
Information Technology Austin, Texas 78754
Joni,
I have two ideas that might work for you. The first is to just add
another checkin command with the new volrange to the script. I've not
tried it but I *believe* the second checkin will wait for the first
to complete. The reason I believe this is because I've accidently
issued 2 checkin com
IBM e-config it forces me to use "0" for
sixth character. I have LTO4 volumes like 100015 in TSM and you see that the
sixth character is not "0". I cannot explain that.
Thank you,
Mehdi
----
Rick Saylo
I found the statement below in the "IBM System Storage TS3500 Tape
Library with ALMS: Introduction and Planning Guide (GA32-0593-03)",
pages 69 and 70. This probably applies even if your library isn't
ALMS enabled but I can't prove it. The feature codes 1700 and 1701
are for "Enhanced Node Cards".
Instead of selecting 'a' on nmon try '^' instead. This will give you
the FC adapter stats from fcstat. At least it does on version 12e of nmon.
Rick Saylor
Austin Community College
At 04:59 AM 2/27/2009, you wrote:
Stef Coene wrote:
>
> On Friday 27 February
Does your 3584 have the Advanced Library Management System (ALMS)
feature? If so, you could define two logical libraries and assign the
appropriate set of tapes to each logical library.
Rick
At 12:11 PM 2/4/2009, you wrote:
Define the one vol range as private volumes to the one storage pool;
de
ar options?
----
Rick Saylor Austin Community College Voice: (512)223-1182
Director of System Services 9101 Tuscany Way Fax: (512)223-1211
Information Technology Austin, Texas 78754
Del,
Thanks for the quick response, but I'm actually referring to the logs
that get invalidated when a full backup occurs. What my DBAs are
trying to do, since the full backups on the 7th, 8th an 9th are no
good, is get all of the logs after the May 6th backup. However, these
logs are marked as i
ps as invalidated let the older transaction logs show
up? Any help would be greatly appreciated.
Thanks,
Rick
Rick Saylor Austin Community College Voice: (512)223-1182
Director of System Services
or copy of this
communication is strictly prohibited. If you have received this
communication in error,
please notify us immediately by replying to the message and deleting
it from your
computer.
**
-
backup is restored to a
remote site as well as our test system. We've never had any problems.
Let me know if you have any other questions.
Thanks,
Rick Saylor
Austin Community College
At 11:21 AM 4/23/2007, you wrote:
Folks,
Any of you esteemed folks using TSM to backup/restore U
mes on the other TSM server.
I would have another talk with management also.
Remind them how important the data is. In my
opinion, getting cheap in this area is the
equivalent to playing with fire. Its not IF you
are going to get burned but WHEN and HOW bad you are going to get burned.
Th
x27;s guide" or "Software
documentation" link. You'll be re-directed to the IBM/Brocade site.
The Fabric O/S manuals may have a section on how to reset forgotten passwords.
http://www-304.ibm.com/jct03004c/servers/storage/support/san/2109f16/installing.html
Good luck,
Rick Saylo
described.
>The addition of an AIX box ate up all available space.
How many slots are there for tapes in your 3583 library? If it's less
than 60, you can add additional slots.
--
Mark Stapleton ([EMAIL PROTECTED])
Senior TSM engineer
----
part of the disaster.
Additionally, I have a backup TSM server at a remote location that
gets a copy of my data via virtual volumes. I use NFS to copy the DRM
plan along with the Volume_History, Device_Configuration and
dsmserv.opt files to my backup TSM server.
Rick Saylor
Austin Community
plete.
ftp://service.boulder.ibm.com/storage/358x/3584/
Rick Saylor
Austin community College
At 03:39 PM 3/2/2006, you wrote:
Well, this is peculiar.
This is a new 3584, firmware level is 5550. (Thanks to the folks who
helped me figure that out yesterday!)
When I use the Tape Library Specialist
same then I wouldn't worry about it. If, on the other hand tape usage
is higher I'd give TSM support a call.
Rick Saylor
At 07:53 AM 2/22/2006, you wrote:
We have set up a new primary storage pool, using lto2 in a 3584 library,
with collocation by group. TSM5.3.2.1 on w2k3.
We are mov
Jack,
The SAC codes are in the 3583 Maintenance Information manual. For the SAC
01 XX codes the manual says to recover by powering off the library for at
least 1 minute.
Rick Saylor
Austin Community College
At 09:38 AM 12/15/2005, you wrote:
Where can I find the SAC codes for a IBM 3583? I
,
Rick Saylor
Austin Community College
At 08:39 AM 12/1/2005, you wrote:
Hi Arnaud
I can connect to the switch with hyper terminal ...
I put my userame Admin and password ...
here's the steps
- run the RSHD.EXE deamon
- firmwaredownload
- IP or host I type the IP of my l
I missing?
Has anyone done this successfully?
Current:
TSM1 ---> COPYPOOL1 -> TSM2 ---> 3583L2POOL
Addition:
TSM1 ---> COPYPOOL2 -> TSM2 ---> 3583L1POOL
Thanks,
Rick Saylor
Austin Community College
512-223-1182
Joni,
Try "q event * type=admin exceptionsonly=yes". This will list the admin
events that failed.
Rick Saylor
Austin Community College
At 07:56 AM 1/26/2005, you wrote:
Hello everyone!
I am trying to do a script to find out if all admin jobs were successful or
not, the summary of the inf
home email address
if you have one.
You shouldn't delete the volume history for you database backups. DRM will
do this for you. Just issue the "SET DRMDBBACKUPEXPIREDAYS" command for the
number of days you want them retained.
Rick Saylor
Austin Community College
At 06:36 AM 1/25/200
and
issue the move drm command again.
Rick Saylor
Austin Community College
At 09:55 PM 11/16/2004, you wrote:
As always you never fail!!! That's it!! I knew there was another tool that I
was missing and that must be it. I am going to start work on the script in
the morning.
I knew there wer
7;re happy with the new installation then connect up your tape library
and you're good to go.
Another option is to try our you're disaster recovery procedures and try to
restore and rebuild your TSM server on the new machine.
Hope this helps
Rick Saylor
Austin Community College
At 03:08 PM
wouldn't be surprised if the tape isn't visible anymore because it has been
pulled completely inside the cartridge. If this is the case then the
cartridges are beyond hope. You'll need to use the restore volume command
to recover the data from your copypool tapes.
Rick Saylor
Austin Co
. Mirror the DB file system, break the mirror and backup the static copy.
Option 3 is probably the best and is what we do. I would be happy to share
our experiences with you.
Thanks,
Rick Saylor
Austin Community College
At 05:17 PM 9/30/2003 -0400, you wrote:
Hello Everyone,
I have a potential client
60
minutes. Cut it back to say 5 minutes so that the drives will be freed up
quickly.
Rick Saylor
Austin Community College
At 11:22 AM 7/29/2003 -0400, you wrote
Hi TSM'ers
Has anybody out there gone from 3 years of nocollocation and then
changed to collocation for better restores. We
might try upgrading to see if that takes care of the problem. By the way,
I'm running my TSM server on a P670 LPAR with 4GB of memory and 512MB of
paging space. Of the 512MB of paging space only about 10% is being used. Of
course, your mileage will vary.
Rick Saylor
Austin Community College
At
SCSI adapters (Feature #6207 - Ultra SCSI Differential PCI
adapter) in my F50 be compatible with my P670?
Thanks,
Rick
--
Rick SaylorAustin Community College Voice: (512)223-1182
Senior Systems Programmer
You have to call 1-888-IBM-Media (1-888-426-6334) to arrange for warranty
replacement. The link below will give you the full details.
http://www.storage.ibm.com/media/prod_data/g225-6689.html
Rick
Rick Saylor
Austin Community College
At 11:26 AM 10/9/02 -0500, you wrote:
>we've got a
08/30/02 01:00:14 ANS1076E *** Directory path not found ***
DSMERROR.LOG
08/30/02 01:00:14 ANS1076E *** Directory path not found ***
08/30/02 03:06:50 ANS1512E Scheduled event 'STDINC_0100_0200'
failed. Return code = 4.
Than
erformance
will suffer. I look forward to any information, good or bad, from anyone
that has tried GEORM with TSM.
Thanks,
Rick
--
Rick SaylorAustin Community College Voice: (512)223-1182
Senior Systems
David
Try asking for what is not in your library. The select below will list
every tape not in the library. So, this would also include tapes being
transported to/from the vault.
select volume_name as "Tape Number", location from drmedia where lib_name
is null
Rick Saylor
Austin
e.cmd
postNschedulecmd c:\some.cmd
Notice the "N" after the PRE/POST, this tells TSM not to wait.
I hope this helps.
Rick Saylor
Austin Community College
At 01:25 PM 1/15/02 -0500, you wrote:
>Those commands - post and preschedulecmd only stop and wait on Unix - Not
>NT - so only use if
gh its networks. Any views or opinions expressed in
>this message are solely those of the individual sender, except (1) where
>the message states such views or opinions are on behalf of a particular
>entity; and (2) the sender is authorized by the entity to give such views
>or opinions.
>
>==
>
--
Rick SaylorAustin Community College Voice: (512)223-7511
Senior Systems Programmer 5930 Middle Fiskville Rd. Fax: (512)223-7156
Information Services Austin, Texas 78752-4331
t;
>If you would like to see a comprable AIX listserv, please email me
>individually.
>
>Thanks,
>Robert Kelley Jr.
>IBM Global Services
>[EMAIL PROTECTED]
------
Rick SaylorAustin Community Col
Don't believe it. Both AIX and ADSM are designed to run without out the
need for re-boots.
Rick Saylor
Austin Community College
At 04:57 PM 10/12/00 +, you wrote:
>I've never seen any evidence that a periodic restart is needed.
>
>Pat Wilson
>Dartmouth College
>[EM
You might try this:
select * from libvolumes where status='Private' and last_use is null
I hope this helps,
Rick Saylor
At 09:34 AM 9/27/00 +0200, you wrote:
>Hello !!!
>
>I'm running ADSM 3.1.2.55 on AIX 4.3.3. I would like a tape's list in private
>status, no
56 matches
Mail list logo
