Look at TDPOSYNC to sync the catalog with TSM.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 11:01 AM
To: [EMAIL PROTECTED]
Subject: Crashed diskpool volume
Hi *
Consider the possibility that you are not expiring well enough, which
could be causing database bloat. (Not to mention tape storage pool
bloat.) How long does your expiration process take? Does it seem to
never end? If so, you may be in an expiration bound death spiral.
If you are having trouble
Hello,
the MMC Snap-In is (AFAIK only) included in the NT/W2K Installation of the
TSM Server.
The Snap-In can manage TSM Servers using NT/W2K as well AIX,etc.
Mit freundlichen Grüßen / Best Regards
Uwe Schreiber
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
30.07.2002 14:33
Please respon
Del,
Thanks for your help. I have tried setting CompressAlways = YES and the
backup last night went alright. I have verified the integrity of the backup
by restoring a mail file that was failing before. It was ok. Do you think
setting CompressAlways=YES might make my backups unreliable, consi
The disk storage pools need to be RAID-1+. It's "other people's data"
and you are responsible for it, from the moment it is backed up from
their client systems. As you have discovered, performance is not good
with anything other than RAID-1.
The Database and the Log also need to be RAID-1. (Mirro
Thanks for bringing it to my attention.
Brian
Clarence Beukes <[EMAIL PROTECTED]> on 07/30/2002 07:31:01 PM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: Brian Dade/DutyFreeAmericas)
Subject: Re: RMAN Sbtape Error
ENV=(TDPO_OPTFIL
ENV=(TDPO_OPTFILE=
This paramater should include the fully qualified path of the TDP options
file.
Clarence Beukes
Advisory IT Specialist - Tivoli Certified Consultant
Geomar SSO Mid Range and Application Support Discipline
Location: IBM Park Sandton, IA2G
Tel: +27 (0) 11 302-6622 Cell:
Ich werde ab 15.07.2002 nicht im Büro sein. Ich kehre zurück am
02.08.2002.
Ich werde Ihre Nachricht nach meiner Rückkehr beantworten.
Vertretung durch Herrn Dalgic (CS3, Tel.: 2746).
Hi,
I'm running AIX v4.3.3 and TDP v2.2.0 for an Oracle v8.1.7 database client. I
verified that I'm using the correct libobk.a. Has anyone encountered the
following error during execution of their backup script?
run {
allocate channel t1 type 'sbt_tape' parms
'ENV=(TDPO_OPTFILE=
)';
backup
Dear Listers,
When I want to define a 3590 in 3494 library i get an I/O error.
define libr 3494lib type=349X device=3494lib
define drive 3494lib drive0 device=mt2.0.0.1
Server option enable3590libr yes.
My scsi adresses on the drives are oke.
RMS is disabled.
Termination is oke.
I can see
Hi,
The q actlog output looks like this:
07/30/02 18:43:06 ANR0406I Session 113779 started for node NSWEB4 (AIX)
(Tcp/Ip 180.166.0.192(50239)).
07/30/02 18:43:06 ANR0403I Session 113779 ended for node NSWEB4 (AIX).
07/30/02 18:43:06 ANR0406I Session 113780 sta
An AUDIT on the disk volume should do it.
I would run FIX=NO on the first pass, I think that will give you a list of
the damaged (in this case, MISSING) files in the activity log.
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 11:0
The MMC snap-in is a Microsoft thing; you'll only find it on Windoze... and
then, only if the TSM server resides on Win2K.
Don France
Technical Architect -- Tivoli Certified Consultant
Tivoli Storage Manager, WinNT/2K, AIX/Unix, OS/390
San Jose, Ca
(408) 257-3037
mailto:[EMAIL PROTECTED]
Profes
There is a checklabel parameter with DRM; you can use
SET DRMCHECKLABEL NO
to suppress label reading during checkout part of MOVE DRM.
Don France
Technical Architect -- Tivoli Certified Consultant
Tivoli Storage Manager, WinNT/2K, AIX/Unix, OS/390
San Jose, Ca
(408) 257-3037
mailto:[EMAIL PROTEC
Just a guess.. could the size of data you are trying to backup is greater
than Storage?
Like backing up file size which is greater than what's available. I
can't recall, but I am thinking if the file is too large to be backed up
it would terminate before writing to storage pool and finding out
Well, well.. I totally read my book the wrong way. I will go recalculate.
Thanks for pointing out this huge error on my part. Now I have to go
figure out where the rest of my database utilization is going, too.
|+>
|| "Thomas Denier" |
|
Lisa,
We deal with it the same way you do: One single entry
in root crontab.
Manuel
--- Lisa Cabanas <[EMAIL PROTECTED]> wrote:
>
>
>
>
>
> Neil,
>
> how do you deal with setting up the archiving for
> the redo logs? Our DBAs
> elected to go CRON all the way, because they were
> hung up on tryin
1st question...you have colocation on or off for the node/PD/storage of
interest?
-Original Message-
From: Marc Lowers [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 11:00 AM
To: [EMAIL PROTECTED]
Subject: select statement using filespaces and tapes
I'm looking for a select sta
> I based the increase in DB size on the "600k
> of database space per object stored by TSM" rule.
I believe the rule of thumb historically given in TSM documentation
is 600 bytes per object, not 600 kilobytes. I have a single client
with 4.8 million backup files in one of its file systems, and s
4.2.2.7 on a Netstor box help upd looks normal...
-Original Message-
From: Alexander Verkooyen [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 7:07 AM
To: [EMAIL PROTECTED]
Subject: Re: Admin Help text is wrapping..
Hi,
We upgraded from 4.2.1.11 to 4.2.2.7 (AIX 4.3.3 ML 10) la
> Can't see how this could be. This is the first time the TDP and TSM
client
> have been installed on these boxes. This is a brand new TSM AIX server
> (5.1.1)
>
> The owner of these boxes installed the clients she received on a CD set.
I
> told her to upgrade the main client to 5.1.1. The TDP has
Thomas,
On AIX, DSMCAD is the Client Aceptor Daemon, and it
will let you establish sessions using any browser (
IE, Netscape, etc.), however it will not start the
scheduler.
To start the scheduler use: nohup dsmc schedule.
This is the output of the ps command grepping for
dsmc:
my_server:/ $ ps -
Hello,
TSM Client 4.2.1.0, TDP for R/3 3.2.0.10, AIX 4.3.3
We are setting up TDP for R/3 and we encounter a problem when trying to link
the back-up library.
When we try to link the TDP back-up library (libtdp_r364.a) with oracle we
see a lot of error-messages. There are symbolic links from this
I had a large backup running last night writing directly to tape. In
the morning the process to backup onsite tapes to the offsite copy
started. That process was waiting on the tape being written by the
client backup. But the client backup was stalled, i.e. it was no longer
sending data to the
I had this with upgrading from 4.2.0.0 to 4.2.1.0 and had to add the
*.webhelp files the smitty install tool. Use latest available to be sure
you have everything.
look in the history here to look for the correct module.
Peter
At 14:07 30-7-2002 +0200, Alexander Verkooyen wrote:
>Hi,
>
>We upgrad
I'm looking for a select statement which will provide me with a list of
tapes associated with a given node, filespace name and backup date. I've
been looking into linking the backups table with another to provide the
result but this has been unsuccessful so far.
Am I close or miles off with thi
I followed Eric's advise and used smitty
to install the message filesets that weren't
installed last night (no need to de-install
and re-install the server, although that works
too).
Everything works fine now.
Thanks,
Alexander
> 4.2.2.7 on a Netstor box help upd looks normal...
>
>
> -Ori
Hi *SM-ers!
One of my diskpool volumes (SSA 36 Gb. disk) crashed. The disk has been
replaced and I started a restore volume for the disk.
Now I need to find out which files are lost (because the files were written
to the disk after the last backup stgpool). This because I need to know
which Oracle
Are you referring to the "file grew with compression and unable to allocate
additional space" problem when going to cached diskpools ? ? ?
If so, run with client settings "compression yes" "compressalways no", if
the file grows with compression it will be sent uncompressed. (famous last
words...)
No its not a license error
-Original Message-
From: Simeon Johnston [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 09, 2002 1:22 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM storage problem
Did all that. Everything looks fine. It's all Read/Write.
Here's a silly question. Would this
>> I based the increase in DB size on the "600k of database space per object
> stored by TSM" rule.
> If I remember it correctly, it's 600 bytes, not 600Kb.
Divide your db-size by the number of files and you will see that it
will be between 300 and 350 bytes.
Cheers,
Henk ten Have (5548800/
> I am running TSM 4.2.0 and one of my nodes is a Domino Server on Windows
> 2000. I am running TDP for Lotus Domino Ver 1 Rel 1 to do backups of our
> Domino databases and mail files. I am getting a few failures for the
same
> mail files all the time. Log says
>
> Backup of mail\tross.nsf fail
OK, You have to put the CA-1 exit in to ignore the open systems tapes first.
You define the ATL in TSM and that is where you set the category codes for
TSM. Lets say you choose 300 for privates, 301 for 3490 scratchs, then
automatically 3590 gets 302. You have to enable the 3590 function in the
No, but there have been some people that have asked for this enhancement.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-Original Message-
From: Bob McCole [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 1:41 PM
To: [EMAIL PROTECTED]
Subject: Restoring NT file
Yep, sounds just like us.
However, we might have a clue (or a resolution, later today).
IBM called and said to be expecting some cables today. These are cables to
connect the 3590 drives to the ATL LM. This kinda missed this when they
installed the drives
-
Hi Nick!
You have probably used the smitty install option "a Install and Update from
LATEST Available Software". You should have selected the "Update Installed
Software to Latest Level (Update All)" option.
If I remember it correctly it has something to do with a help module not
being installed/up
TSM is very good about recovering from such things with its
comit-rollback logic. The files that didn't make it onto the tape,
including the one which was in the process of being copied when the
error occured, were not deleted from the disk storage pool. TSM was
designed to survive a power failure
All,
Two questions to ask regarding experiences with API's.
I'd like some feedback if possible before pursuing PMR's and Enhancement Requests..
RMAN for Oracle..
When 'cach migrated files' is set a primary disk pool, RMAN is unable to work
out 'real space' in the
the pool when 'cac
Hi. Someone said that had found their answer.
try help SET DRMCHECKLABEL
(Specify Label Checking)
-Original Message-
From: Burak Demircan [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 12:26 AM
To: [EMAIL PROTECTED]
Subject: move drmedia
Hi,
How can I prevent my 3583 li
Hi .. at all,
I have a problem while define a DLT Tape Library 35/70 "Compaq". I'm using
TSM 5.1.1.0 under Windows 2000.
I can define the library with 2 tape drives, but the library only see 7
slots, (and the library have 15 slots) I can to define the tape drives with
element 1 and 2.
I looking in
Hi Todd!
> I based the increase in DB size on the "600k of database space per object
stored by TSM" rule.
If I remember it correctly, it's 600 bytes, not 600Kb.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Todd Lundstedt [mailto:[EMAIL PROTECTED]]
Sen
Neil,
how do you deal with setting up the archiving for the redo logs? Our DBAs
elected to go CRON all the way, because they were hung up on trying to use
the scheduler to test the thresholds every ten minutes. They didn't want
to use a number of schedulers to run the hot/full, hot/incr an
TSM 4.2.1.7 running on AIX 4.3.3
Database is 8GB, 66.2% utilized. DBVols are on an ESS shark.
We have an application server that the admins would like to backup on the
TSM server. The problem is, after I analyzed the backup needs of this one
server, my database would grow an additional 300GB, a
Hi Eric,
thanks for that. We've just de-installed / re-installed the server with
Update All and its working fine now,
many thanks,
Nick Rutherford
"Loon, E.J. van - SPLXM" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 30/07/2002
13:12:16
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTE
Hi,
I have strange output on TSM on my new tsm install (TSM 5.1.1.2)
I have installed it on AIX and didn't forget US fileset like others do.
Please see the attached gif files.
Regards,
Burak
- tsm_error.gif
tsm_error.gif
Description: Binary data
Nick,
In fact, something opposite happens to me. When I type 'help XXX' it
returns text messages in a very long long line. It never wraps text
line. I wander if I need to set up some parameter for the output of HELP
cmd. Thanks.
Jin Bae Chi (Gus)
Data Center
614-287-2496
614-287-5488 Fax
e-
Dear Zoltan,
I am hooking up an 3494 with 3 scsi drives to tsm 5.1 and w2k.
Eventough I see mij 3590 drives on my scsi bus I cant define the drives
because of an I/O error.
Does this sound familliar to you ?
Best Regards,
Koen Willems.
>From: Zoltan Forray/AC/VCU <[EMAIL PROTECTED]>
>Reply-
Hi,
I have the following problem:
Virtual mount point which is a symbolic link to a directory on a NFS
filesystem is not shown in the client GUI
NFS server is a AIX4.3.3 machine and I have the problem with both
clients, TSM client 4.1 on a aix machine or TSM client 5.1 on a Linux
machine ru
Hi
I have the same hardware (Compaq DLT Library, 2 x DLT drives, 15 x DLT tapes)
and os Windows 2000 AS but just TSM server v.4.2.1.0.
I was defined element address 1 and 2 now it works and I can
checkin all of 15 tapes. Also I think your attached web page is for different
library than yours.
Hi,
we had a "sort of the same problem", Update TSM BAclient from Version 3.7 ->
4.2.1.32, TDP 1.1.2 (before and after), after the upgrade we got the message
'Unknown format' when trying to retrive backups from the Node filespace, TSM
support couldn't help there. So we had to start from scratch, r
Hi.
In DRMSTATUS there is a parameter called:
Check Label : It should be No if you wish to check out without checking.
just: "set drmcheckl no " - and that is your answer
Ran.
-Original Message-
From: Burak Demircan [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 7:26 AM
To: [
Can't see how this could be. This is the first time the TDP and TSM client
have been installed on these boxes. This is a brand new TSM AIX server
(5.1.1)
The owner of these boxes installed the clients she received on a CD set. I
told her to upgrade the main client to 5.1.1. The TDP hasn't changed
Hi,
I defined my second TSM server as "Other Server" with proper definition
attributes.
But when I click "link to node" shortcut on WEB interface I see following
message:
Your login has timed out. Please login again.
Administrator Login -> this is a button
Any idea what causes this?
Hi,
We upgraded from 4.2.1.11 to 4.2.2.7 (AIX 4.3.3 ML 10) last night and
we are having the same problem now.
Alexander
> Hi all,
> we've just upgraded our TSM server to 5.1.1 and we are having problems with
> the command line help function. When entering 'HELP UPD' via the TSM Admin
> co
I've had some limited succes in the past by renaming the directories to be
restored to something like directory.old. Then restoring the directories in
question using the dirsonly option, and then copying the files back into
newly restored directories from the renamed directories.
"Bob McCole"
Hi,
the TSM 4.2 Technical Guide mentions a snap in for the Microsoft Management
Console which can be used for administering a TSM server. I just installed
TSM 5.1.1.1 on AIX and can't find anything like a snap in. Where can I find
it?
Best regards
Gerhard
---
Gerhard Rentschleremail:[
Hi all,
we've just upgraded our TSM server to 5.1.1 and we are having problems with
the command line help function. When entering 'HELP UPD' via the TSM Admin
command line, the server replies with the following format text...
tsm: ADSM>help upd
UPDATE Commands||UPDATE Commands||Use the UPDAT
Hi Carlos,
Firstly, I think is not recomendable that you mantain your actual TSM server version
because, like you should know, 4.1 version is out of support.
Answering to your question, you have a complete procedure of how to add an automatic
library in any "Quick start"
http://www.tivoli.com/s
Christian,
Have you tried to use the lbtest tool, and see what that tool reports, but
what is the type of your lib ..
regards
-Original Message-
From: Christian Astuni [mailto:[EMAIL PROTECTED]]
Sent: maandag 29 juli 2002 20:03
To: [EMAIL PROTECTED]
Subject: DLT Tape Library Compaq 35/70
Probably the default is NO to make the current behaviour of MOVE DATA
consistent with older versions, where the reconstruct option did not
exists and where MOVE DATA did not reconstruct aggregates. Today, I
allways use RECONST=YES.
Gerhard Wolkerstorfer <[EMAIL PROTECTED]> schrieb:
> I hardly can
No need to manually edit /etc/filesystems. The
dsmmigfs add command will make the necessary changes
to /etc/filesystems.
--- jamshid_akhter <[EMAIL PROTECTED]> wrote:
> Can any body help me to find the way/procedure to
> add a new file system in a existing hasm client.
> We have already one fil
61 matches
Mail list logo
