Re: [vchkpw] hmmm, question
Paul Theodoropoulos writes: > > we've had a request from a customer to be able to forward only the subject > line (or minimal headers) from incoming messages to the customer's wireless > device, the reason of course being that if they receive a large attachment > it chews up a lot of their bandwidth allotment. > > i've been pondering this for a bit, and can't quite come up with a > solution. i keep thinking something like forwarding the message to another > account they create, and that one having an autoresponder on it, but that's > not quite right. > > anyone run across this before? thoughts? anyone? bueller? > > > Paul Theodoropoulos > http://www.anastrophe.com > http://folding.stanford.edu > The Nicest Misanthrope on the Net > Hello, Here is a link that might be useful. I happen to see it while searching for something. Never played with it. http://www.gnu.org/software/anubis/doc/anubis.html#SEC2 Pls. see the section : "Inserting files" under "Action" : RGDS Thomas Joseph "I never give 'em hell. I just tell the truth and they think it's hell" -- Truman.
Blacklisting
Whats the easiest way to prevent email from a certain domain being accepted by qmail (Ideally with a returned message to the originating email address with a "blacklisted" note) Any input appreciated TIA -- Tom >From the desk of Thomas J. Elliott teejay(at)netexecutive.com ICQ# 8018364 http://wwp.mirabilis.com/8018364 Webcam:- http://www.fras-o-cam.com Not many people realize just how well known I am. The thoughts above are (c) August 21, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply
Re: dot qmail
Hi, > If I create a .qmail-pierre, it works. > But if I try .qmail-pierre.rodriguez, it don't. > (for sure, both originals mailboxes are created...) > I suppose it's because of the dot in the middle > of the file name. use .qmail-pierre:rodriguez "." in mail-addresses must be written as ":" for qmail Thomas
Re: AGAIN: BUG in vdelivermail
Hi, > The directory in wich vdelivermail wants to deliver is wrong > (/var/www/domains/exdomain.com/domains/exdomain.com/postmastertmp/), it should > be /var/www/domains/exdomain.com/domains/exdomain.com/postmaster/Maildir/tmp/. Meanwhile this bug will (hopefully) be solved, you can try to make a symbolic link postmastertmp->postmaster/tmp/ to avoid this bug. Thomas
Pop3 Auth Failure
Hi guys, ive set up a qmail system with vpopmail & mysql as per the 'toaster' at http://matt.simerson.net the imap auths fine but im having trouble with pop3. I realise you cant help me diagnose further without more info so any advice appreciated, if you could let me know what to post i'd appreciate it. -- Tom >From the desk of Thomas J. Elliott [EMAIL PROTECTED] ICQ# 8018364 Phone# 07764486175 Webcam:- http://www.fras-o-cam.com Make up a language and ask people for directions. The thoughts above are (c) October 28, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply
Re: Pop3 Auth Failure
Ok, I think I got this right (I'm still kinda new to qmail et all so bear with me if thats ok) #!/bin/sh PATH=/var/qmail/bin:/usr/local/bin:/usr/bin:/bin export PATH exec tcpserver -R -H -c100 0 pop3 qmail-popup pop.power-hosts.co.uk \ /usr/home/vpopmail/bin/vchkpw qmail-pop3d Maildir splogger pop3 -- Tom >From the desk of Thomas J. Elliott [EMAIL PROTECTED] ICQ# 8018364 Phone# 07764486175 Webcam:- http://www.fras-o-cam.com Make up a language and ask people for directions. The thoughts above are (c) October 28, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply - Original Message - From: "Bill Shupp" <[EMAIL PROTECTED]> To: "Thomas Elliott" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, October 29, 2001 8:12 PM Subject: Re: Pop3 Auth Failure > > Post your pop startup script and the the error that's logged in your > mail log... > > Regards, > > Bill Shupp >
Re: Pop3 Auth Failure
Yeah, ive tried that, the strange thing is IMAP works fine, just pop3 doesnt. Also, whilst adding and removing users seems to work fine, and imap seems to work after that, vuserinfo & pop3 do not. Any ideas? -- Tom >From the desk of Thomas J. Elliott [EMAIL PROTECTED] ICQ# 8018364 Phone# 07764486175 Webcam:- http://www.fras-o-cam.com Make up a language and ask people for directions. The thoughts above are (c) October 28, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 30, 2001 3:59 AM Subject: Re: Pop3 Auth Failure > Are you using user%domain.com for the username in pop authentication? > > Try the following: > > $ telnet localhost 110 > $ user thomas%thomasesdomain.com > $ pass thomasespassword > $ stat > $ list > > > Does that seem to work? > > > Justin > > > > > In a message dated Mon, 29 Oct 2001 3:08:13 PM Eastern Standard Time, "Thomas Elliott" <[EMAIL PROTECTED]> writes: > > > Hi guys, ive set up a qmail system with vpopmail & mysql as per the > > 'toaster' at http://matt.simerson.net the imap auths fine but im having > > trouble with pop3. > > I realise you cant help me diagnose further without more info so any advice > > appreciated, if you could let me know what to post i'd appreciate it. > > > > -- > > Tom > > From the desk of Thomas J. Elliott [EMAIL PROTECTED] > > ICQ# 8018364 Phone# 07764486175 > > Webcam:- http://www.fras-o-cam.com > > Make up a language and ask people for directions. > > The thoughts above are (c) October 28, 2001 > > WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply > >
Re: required conversion from Netscape mail server to QMAIL
> hi all > iam using Netscape mail server > due to the cost, i have shifted to Qmail Nice ... :) > what is my problem is > how do i convert the existing mails from netscape mail server to qmail > server > if not, how do i ask my existing user to check pull mail from existing mail > server to here Maybe you can advice your Netscape server to resend all stored and queued mail via a relay-server to your qmail-box. That would be the easiest way i think :) Greets, Thomas
[vchkpw] No delivery
Hello, my Qmail + Vpopmail Server has got a problem i think. The following log event is written, but the message was not delivered to the mailbox of the user. I can´t find it on the message on the system. But the problem is not general, it´s a problem of some sender-domains. Sep 9 13:50:46 lbwww qmail: 1031572246.795441 new msg 9176425 Sep 9 13:50:46 lbwww qmail: 1031572246.795640 info msg 9176425: bytes 32103 from <[EMAIL PROTECTED]> qp 27843 uid 539 Sep 9 13:50:46 lbwww qmail: 1031572246.797355 starting delivery 8938: msg 9176425 to local [EMAIL PROTECTED] Sep 9 13:50:46 lbwww qmail: 1031572246.797493 status: local 3/10 remote 1/20 Sep 9 13:50:46 lbwww qmail: 1031572246.797521 delivery 8937: success: did_0+0+1/ Sep 9 13:50:46 lbwww qmail: 1031572246.797548 status: local 2/10 remote 1/20 Sep 9 13:50:46 lbwww qmail: 1031572246.815133 delivery 8938: success: did_0+0+1/ Sep 9 13:50:46 lbwww qmail: 1031572246.815278 status: local 1/10 remote 1/20 Sep 9 13:50:46 lbwww qmail: 1031572246.815306 end msg 9176425 Thank you. Thomas
[vchkpw] Import to new Server
hi, we are using vpopmail 5.2.1 and we want to set up a new server system. can we import or copy the existing domains and users to the new system?? i tested copying some domains, but mails were not delivered. i also set the config files (virtualdomains) etc. is there a nice way to get them all to the other server?? thx thomas
[vchkpw] quota?
anyone had updated the " vqmaillocal.c " to enable the quota support for qmail-local? if your patch isn't free of charge please give us a quote and the payment method. we need this path within 2 weeks. Many thanks. Thomas.
[vchkpw] POP3 Authentication problem
I have installed vpopmail with virtual domains active. When I try to connect with outlook express from another computer, vchkpw can't find my user account. The connection is rejected. In /var/log/maillog, it says "vchkpw: vpopmail user not found [EMAIL PROTECTED]" How can I get vchkpw pointed to the proper virtual domain to find the user name and authenticate it. Tom Strike
Re: [vchkpw] POP3 Authentication problem
Abel Lucano wrote: > try logging with [EMAIL PROTECTED] where domain.com is the domain that > you've defined the account thomasj belongs to. Thanks, But that's one of the first things that I tried. The result was, vpopmail received [EMAIL PROTECTED]@192.168.0.5 and still didn't authenticate. Kurt Bigler wrote: > For what its worth, I find that Outlook Express fails on the connect for the > first 2 or 3 or 5 or 10 times after a new account is created in OE. Keep > repeating and it eventually works. I never found out why. I've been trying it all day long, testing it. If it was going to work as is, it would have done it by now. Thanks for your response anyway. Cory Wright wrote: > Try setting your username in Outlook to the email address that you are trying > to check. If you want to use just your username then you can compile vpopmail > with the --enable-default-domain=yourdomain.com option. I don't remember doing this, just enabling default domains. Is there a way to set the default domain without deleting the everything and starting over with a new compile? Tom S.
Re: [vchkpw] POP3 Authentication problem
Cory Wright wrote: > No need to delete anything. Just recompile and rerun 'make install-strip'. I tried that after the first compile without enabling anything. The result was, make ended with a "nothing to do" statement. So, I deleted the vpopmail directories and started over again with ./configure --enable- Tom S.
Re: [vchkpw] POP3 Authentication problem
Cory Wright wrote: > You needed to run 'make distclean' before you ran ./configure again. Did distclean and recompiled and it looks like I'm making headway now. Now, the maillog shows "vchkpw: password failier [EMAIL PROTECTED]:192.168.0.5". I assume that this means that it in fact found thomasj at gabbs.org but it isn't getting the password correct. Cory Wright wrote: > Anyway, if your problem still is not solved, show us the full ./configure > command you ran. I used: [root@Gabbs-01 vpopmail-5.2.1]# ./configure --enable-roaming-users=y --enable-clear-passwords=y --enable-valias=y --enable-default-domain=gabbs.org --enable-relay-clear-minutes=20 --enable-ucspi-dir=../ucspi-tcp-0.88 --enable-logging=y [EMAIL PROTECTED] The following is what it compiled to: vpopmail 5.2.1 Current settings --- vpopmail directory = /home/vpopmail uid = 7797 gid = 2209 ip alias = OFF --enable-ip-alias-domains=n (default) address extentions = OFF --enable-qmail-ext=n (default) roaming users = ON --enable-roaming-users=y tcpserver file = /home/vpopmail/etc/tcp.smtp open_smtp file = /home/vpopmail/etc/open-smtp user quota = OFF --enable-defaultquota=NOQUOTA default table optimization = many domains --enable-many-domains=y default auth module = cdb default system passwords = OFF --enable-passwd=n default file locking = ON --enable-file-locking=y default file sync = OFF --enable-file-sync=n default disable vdelivermail fsync auth logging = ON --enable-auth-logging=y default mysql logging = OFF --enable-mysql-logging=n default clear passwd = ON --enable-clear-passwd=y (default) valias processing = ON --enable-valias=y pop syslog = show successful and failure login attempts --enable-logging=y default domain = gabbs.org --enable-default-domain=gabbs.org auth inc = -Icdb auth lib = Thanks, Tom S.
Restoring sqwebmail to a new hard drive.
We are using tar to move our system to a larger hard drive. After the restore of the system, we are having the following problem. When a user tries to log into the web interface, he is reported to have either a bad password or login ID. The error that pops up on the system console is "Bad code in Cache". Is there something that needs to be done with the cache after a restore? Possibly a cach reset? Thanks MarkT.
vpopmail-API + PHP4
Hi folks, is it possible to compile PHP4 woth vchkpw support so that i can use the functionality provided by the API with PHP, as it's possible with vmailmgr ? Thanks a lot, Thomas
adding maildrop
how do i implement maildrop in my vpopmail system so that every user can set up his own rules, using sqwebmail ???
Re: Domain to Domain on server gets this: Sorry, no mailbox here by that name. vpopmail (#5.1.1)
On Wed, 30 Aug 2000, Kathleen Farber wrote: > Any ideas why domains on a server can't send to another domain on the > server? They get this message: Sorry, no mailbox here by that name. > vpopmail (#5.1.1) > > Any ideas? try removing them out of the locals file -- eine neue Definition von Breitband ... http://ewave.at eWave.at Telekommunikations AG Museumstrasse 3B/14 Tel: +43 1 / 522 38 84 A-1070 Wien Fax:+43 1 / 522 38 84 -55
how can i use vchkpw in a perl script ??
hi, i trying to implement vchkpw in a perl script to check user passwords but i don know how to call the vchkpw programm , any hints ?? thx, Thomas
QMAIL + VPOPMAIL for FreeBSD - Comments
Hi there, i've just found the document mentioned above on the vpopmail page. I'm using RedHat 6.1 (and one SuSE 7.0) and tried what's in the document. I only had some minor changes to do (BSD != RedHat), but the rest works and is great. There's only one big fault : The Mailtransfers are NOT logged via syslog and to /var/log/maillog That's very bad .. perhaps someone can fix that? Greetingz, Thomas
Re: How to back up MSQL
Hi, > How to backup mysql..please help me.. 1.) Stop mysql ( on RedHat : /etc/rc.d/init.d/mysql stop) 2.) cd to the DB-Dir, e.h. cd /usr/local/var 3.) tar czf /root/mysql-backup-DDMMYY.tar.gz * 4.) start mysql again /etc/rc.d/init.d/mysql start The Script can also be mysql.server or mysqld Greets, Thomas
vsetuserquota not working
i compiled vpopmail after a ./configure --enable-default-domain=ewave.at --enable-hardquota=y then did vsetuserquota [EMAIL PROTECTED] 10 but user did still accept mails of 1mb and bigger what wrong, what missing ???
Strange Behavior
I've got some strange behavior here. I tried to install 4.9 over 4.8.7 . Now vadddomain works fine, but with vadduser the Maildir of the user gets created but no more .qmail files to get the mail delivered, any ideas ? Mit freundlichen Grüssen Thomas Arnold Chief Management Application Services # Ihre Xmedia Agentur:# # http://www.alea-active.com # alea active GmbH| fon: 06201 - 90 20 4-0 Hauptstr. 97-99 | fax: 06201 - 90 20 4-17 69 469 Weinheim |Leonardo: 06201 - 90 20 4-27 mail: [EMAIL PROTECTED] | Fritz-Data: 06201 - 90 20 4-26 =
only one rsa key??
is it possible that i can only define one rsa key at the moment ??
in ipsec.secrets i attached the line
include /etc/ipsec.roadwarrior
and copied the ipsec.secrets to ipsec.roadwarrior, then only changed the names
from
@host1.test.at @host2.test.at: RSA {
to
@host1.test.at @roadwarrior.test.at: RSA {
in ipsec.roadwarrior
in the .conf files on both hosts i also changed the host2 to roadwarrior,
but, after i restarted ipsec, whet upping ipsec it doesn't get an answer
anymore...
AW: Baffled newbie
Looks like there is a spelling mistake in that line it is called vchkpw , not vhckpw exec tcpserver -c "$concurrency" -H -R \ 0 pop-3 \ qmail-popup "$hostname" \ /home/vpopmail/bin/vhckpw \ qmail-pop3d Maildir/ Mit freundlichen Grüssen Thomas Arnold Chief Management Application Services # Ihre Xmedia Agentur:# # http://www.alea-active.com # alea active GmbH| fon: 06201 - 90 20 4-0 Hauptstr. 97-99 | fax: 06201 - 90 20 4-17 69 469 Weinheim |Leonardo: 06201 - 90 20 4-27 mail: [EMAIL PROTECTED] | Fritz-Data: 06201 - 90 20 4-26 = -Ursprüngliche Nachricht- Von: Alex Rhodes [mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 20. Dezember 2000 00:52 An: [EMAIL PROTECTED] Betreff: Re: Baffled newbie Man, managed to mail this *just* to Bill, but meant to send this to the list (one of those days): Bill Shupp wrote: >The problem then is most certainly in your vpopmail startup script >(tcpserver). Please post it. Sorry 'bout that - knew I was forgetting something. pop script: exec tcpserver -c "$concurrency" -H -R \ 0 pop-3 \ qmail-popup "$hostname" \ /home/vpopmail/bin/vhckpw \ qmail-pop3d Maildir/ conncurreny is set to 20, and hostname is metis1.metisit.com In respose to Tim Hunter, the log responses I am seeing are: [date] [time] metis1 vpopmail[id]: vckpw: No user found user@vdomain:[querying IP address] -- |_ Oo\ Alexander J. Rhodes| Metis Internet Technologies [EMAIL PROTECTED]| http://www.metisit.com
vpopmail+newer qmailadmin
what do i have to do to get the qmailadmin-pre1 running with vpopmail-4.8.9 or so ? thx thomas
help!! percenthack??
>>>> RSET ><<< 250 flushed >>>> MAIL FROM:<[EMAIL PROTECTED]> ><<< 250 ok >>>> RCPT TO:<[EMAIL PROTECTED]> ><<< 250 ok > > Relay test result > >Hmmn, at first glance, host appeared to accept a message for relay. > so whats up here, thought the percenthack is turned off by defualt if the file's not here ?? help fast!!! thx Thomas
Re: vpopmail addons..
Hi, > What do You think about inserting some vchkpw stats to database? > For example: > timestamp and ip of last user's log: Serveral months ago i submitted a patch that enabled logging of : * last user login * ip * date/time to a mysql-db. But the changes never became public to the other users :-( Thomas
ezmlm-web with vpopmail ?
since the qmailadmin seems unable to cope with ezmlm-idx and sql, anyone done ezmlm-web with vpopmail ?
Re: ezmlm-web with vpopmail ?
Ken Jones wrote: > Thomas Ackermann wrote: > > > > since the qmailadmin seems unable to cope with ezmlm-idx and sql, > > anyone done ezmlm-web with vpopmail ? > > Don't give up so soon. I think I've got a fixed version of > qmailadmin that talks to ezmlm-idx. I haven't tested the sql > portion yet. > > Ken Jones it works in a quite strange manner, setting up sql for subscribers quite ok but ignoring sql for moderators...
chrooting the vpopmail ?
anyone know what programs and stuff vpopmail need when chrooted besides the libs? i installed it with configure --enable-qmaildir=$HD/qmail/ --enable-admin-email=$PM --enable-tcprules-prog=/bin/tcprules --enable-logging=p --enable-sqwebmail-pass=y --enable-tcpserver-file=/etc/tcp.smtp --enable-passwd=n Error: Unable to chdir to vpopmail/domains/domain directory any ideas?? thx thomas
ps and /proc?
can anyone tell me why vpopmail needs the ps utility and the /proc filesystem ?? and, whats wrong when that message comes up ? "could not open assign file Error: Unable to chdir to vpopmail/domains directory" cu thomas
Re: Next 5.0 features
if somehow the need for the ps tool could be removed it where great it makes little sense to build a chroot env around vpopmail with a mounted /proc regards Thomas Ackermann
Re: Netscape Client
> Hello > How do I access my mails using Netscape client? > I've specified POP User as [EMAIL PROTECTED] > and POP3 server as domainname.com > This is working fine with Outlook Express. But in Netscape client this gives an >login Err. Replace the "@" by a "%" and Netscape likes it :) Thomas
Submit : Patch for logging in MySQL-DB
Hi there, i've modified vpopmail-4.9.8 do make vchkpw to log the last POP-Access for a user. It logs * Username * Domainname * Date+Time * IP-Address * Resolved IP (if available) Just compile vpopmail with mysql support , add --enable-logging=y and create the following table in the vpopmail-database : CREATE TABLE lastauth ( user varchar(200) NOT NULL, domain varchar(255) NOT NULL, timestamp datetime DEFAULT '-00-00 00:00:00' NOT NULL, ip varchar(15) NOT NULL, host varchar(255) NOT NULL, PRIMARY KEY (user, domain), KEY user (user, domain) ); It's maybe not the best way to do it, but it realy works great here at a local ISP (about 600 Domains). Just replace the vchkpw.c from the vpopmail-source with the attached one. I hope that this patch *will* be added to the official vpopmail-distribution (e.g. with a configure option) Greets, Thomas vchkpw2.c
Submit : Patch for vmailmgr <-> vpopmail
Hi there,
we are moving from vmailmgr to vpopmail.
Until now our customers have pop-logins like :
sgalaxy-john
In vpopmail it would be :
[EMAIL PROTECTED]
To make vchkpw accept both logins, i've patched it :)
Just copy the attached vchkpw3.c to vchkpw.c, add the contents of your "old"
/var/qmail/control/virtualdomains to the vmailmgrdom-array, e.g.
char *vmailmgrdom[] = {
"mydomain.org:mydom",
"space-galaxy.net:sgalaxy",
'\0'
};
Then configure vpopmail as you need. Open the Makefile and append
-DVMAILMGR to CFLAGS :
CFLAGS = -O2 -Wall -DVMAILMGR
Now compile vpopmail and people can login with the old vmailmgr-style AND with the
great
vpopmail-style.
Warning : The code works here, but there may be some bugs in it.
Remmeber : I'm not realy a C-Guru ;-)
If you don't add -DVMAILMGR to CFLAGS, vchkpw is compiled without vmailmgr support.
I hope this will help someone out there and maybe the changes can be included in a new
vpopmail-version ?! :-)
Contact me for further questions.
vchkpw3.c
Re: Submit : Patch for logging in MySQL-DB
Hi Ken, >> I hope that this patch *will* be added to the official vpopmail-distribution (e.g. >with >> a configure option) > Done. BIG thanks to you !!! > I removed the host value, since the REMOTEHOST environment variable > is not set if tcpserver -H option is on. (I like -H). > I also added a unique index on user and domain. This is so we can > use the mysql "replace" function. Yes, right. Here i run my tcpserver with "-h", because we need to check some users hosts (i know nslook'ing'up the IP is the same, but i'm to lacy ;)), so it's all right to remove it from the official version! Again, BIG thanks ! Thomas
Store mail AND SMTP send it
Hi there, i'm having a (big) problem here. One of our customers are building theier own mailserver. So i have to store incoming mail on our server as usual, and need to forward the mail to their server. At the moment, i've just appended a | foward $DEFAULT@IP to .qmail-default. This works, but their server can't deal with the ip (e.g. [EMAIL PROTECTED]). The server needs real domain-names in the mail-addresses. So i've been loking for some tools that i can insert in the .qmail-file to resend the mail via SMTP (not like forward does!). maildirsmtp from DJB seems to be what i need ... but this program can only deal with files in maildirs... I'm searching for a program that can be integrated within a .qmail-file like | the-programm IP-OF-SERVER to send the incoming mail to the given IP-Address Can someone help me ?? Thanx a lot, Thomas
[REQUEST] SMTP-Program
Hi folks, it would be nice if vpopmail would include some smtp-send program like "vpopsmtp" or so. Example : I need to send an incoming message directly via SMTP to another host, without using forward or something like that. At the moment i'm using the "maildirsmtp" script from the ucspi-package triggered by a cronjob every 5 minutes. It would be nice if i can tell vpopmail to send mail addressed to "[EMAIL PROTECTED]" via a given SMTP server like maildirsmtp does. Thanks, Thomas
slightly off topic
Just reinstalled qmail, presented with, to my surprise http://qmail.action-irc.net/cgi-bin/qmailadmin any idea whats going on there? --TomFrom the desk of Thomas J. Elliott teejay(at)netexecutive.comICQ# 8018364 http://wwp.mirabilis.com/8018364Webcam:- http://www.fras-o-cam.comOn the other hand, you also have 5 fingers.The thoughts above are (c) May 12, 2001WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply
Help!
Installed qmail as per http://matt.simerson.net/computing/qmail/qmail.toaster1.2.shtml Used the older version of the guide as im on FreeBSD 4.1.1 still... fired it all up, su-2.04# /usr/local/sbin/qmail start Starting qmail: svscan. su-2.04# exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied exec: /var/qmail/rc: permission denied Etc. The contents of most files can be found on that page, everything is still standard apart from the http locations. Any ideas? -- Tom >From the desk of Thomas J. Elliott teejay(at)netexecutive.com ICQ# 8018364 http://wwp.mirabilis.com/8018364 Webcam:- http://www.fras-o-cam.com (A)bort (R)etry (F)ail (U)nplug & (S)ell. The thoughts above are (c) May 18, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply
Re: Help!
Yep, great did that now works wonders, only problem I have to deal with now is qmailadmin not wanting to let me log-in with domain info I just created with vpopmail. Arrgh, ill get there in the end I hope. -- Tom >From the desk of Thomas J. Elliott teejay(at)netexecutive.com ICQ# 8018364 http://wwp.mirabilis.com/8018364 Webcam:- http://www.fras-o-cam.com (A)bort (R)etry (F)ail (U)nplug & (S)ell. The thoughts above are (c) May 18, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply - Original Message - From: "Chris Bolt" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, May 19, 2001 2:03 PM Subject: RE: Help! > Did you chmod +x /var/qmail/rc ? > > > Installed qmail as per > > http://matt.simerson.net/computing/qmail/qmail.toaster1.2.shtml > > > > Used the older version of the guide as im on FreeBSD 4.1.1 > > still... fired it > > all up, > > > > su-2.04# /usr/local/sbin/qmail start > > Starting qmail: svscan. > > su-2.04# exec: /var/qmail/rc: permission denied
Puzzling
Hi Installed qmail as per the matt simerson (i think) faq for freebsd 4.1.1 (will find the URL if needed). Was running fine, but I hadnt rebooted since I installed it - today I had to reboot, after I did, my pop authentications dont work. Not sure what info to post here, any ideas appreciated. -- Tom >From the desk of Thomas J. Elliott teejay(at)netexecutive.com ICQ# 8018364 http://wwp.mirabilis.com/8018364 Webcam:- http://www.fras-o-cam.com This country needs more unemployed politicians. The thoughts above are (c) May 27, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply - Original Message - From: "Dushyanth Harinath" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, May 29, 2001 4:10 PM Subject: Re: passwords? > Hi, > > > hmm > > > > this look like one of thounsends stupid algoritms for salts ...but i > > don't need this > > Thats how crypt function is used...If u want a readymade one go to > http://squirrelmail.sourceforge.net > > in the plugins page u have a change mysql password plugin...download it and > read the source..but it works the same way.. > > > regards > dushyanth > > >
Re: Puzzling
bash-2.04$ ps -axu|grep tcpserver root 339 0.0 0.2 868 436 con- I 3:54PM 0:00.01 tcpserver -p -R -x /etc/tcp.smtp.cdb -u 82 -g 81 0 smtp rblsmtpd qm root 342 0.0 0.2 868 412 con- I 3:54PM 0:00.06 tcpserver -H -R -v -c100 0 110 qmail-popup ircgeeks.co.uk /usr/home bash-2.04$ its running, just wont authenticate with vpopmail... any other ideas? -- Tom >From the desk of Thomas J. Elliott teejay(at)netexecutive.com ICQ# 8018364 http://wwp.mirabilis.com/8018364 Webcam:- http://www.fras-o-cam.com This country needs more unemployed politicians. The thoughts above are (c) May 27, 2001 WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply - Original Message - From: "SILVER, MICHAEL A" <[EMAIL PROTECTED]> To: "'Thomas Elliott'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, May 29, 2001 7:07 PM Subject: RE: Puzzling > I assume you are using TCPServer instead of inetd to kick off your pop > server. > > I had this same problem. Check the script that loads TCPServer and make > sure you use the full path names both for TCPServer and for Qmail-pop (or > whatever the pop server is called). > > My guess is that TCPServer is not running since it couldn't be found in the > path when the bootup script ran. > > ...Michael... > > -Original Message- > From: Thomas Elliott [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, May 29, 2001 12:13 PM > To: [EMAIL PROTECTED] > Subject: Puzzling > > > Hi > Installed qmail as per the matt simerson (i think) faq for freebsd 4.1.1 > (will find the URL if needed). > Was running fine, but I hadnt rebooted since I installed it - today I had to > reboot, after I did, my pop authentications dont work. Not sure what info to > post here, any ideas appreciated. > > -- > Tom > >From the desk of Thomas J. Elliott teejay(at)netexecutive.com > ICQ# 8018364 http://wwp.mirabilis.com/8018364 > Webcam:- http://www.fras-o-cam.com > This country needs more unemployed politicians. > The thoughts above are (c) May 27, 2001 > > WARNING Usenet Reply-To Spam Trapped! Remove .nospam To Reply > > > > - Original Message - > From: "Dushyanth Harinath" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, May 29, 2001 4:10 PM > Subject: Re: passwords? > > > > Hi, > > > > > hmm > > > > > > this look like one of thounsends stupid algoritms for salts ...but i > > > don't need this > > > > Thats how crypt function is used...If u want a readymade one go to > > http://squirrelmail.sourceforge.net > > > > in the plugins page u have a change mysql password plugin...download it > and > > read the source..but it works the same way.. > > > > > > regards > > dushyanth > > > > > >
RE: New software qmailmrtg7
>> -Original Message- >> From: Ken Jones [mailto:[EMAIL PROTECTED]] >> Sent: 18 June 2001 14:11 >> To: [EMAIL PROTECTED] >> Cc: [EMAIL PROTECTED] >> Subject: New software qmailmrtg7 >> >> >> Thought you folks might want to take a look at this: >> >> http://www.inter7.com/qmailmrtg7/ >> >> Supports tcpserver -v logging as well as qmail-send logs It doesn't work here. I don't have "qmail-send" logs in /var/log/qmail. qmail-smtp and qmail-pop3 have their logs in /var/log/qmail/qmail-xxx Then i have a nice /var/log/maillog. So to get qmailmrtg7 to work? Can you post your qmail startscripts (with svscan i think) ? Thanks, Thomas
RE: New software qmailmrtg7
Hi, > Just edit the qmail-mrtg.cfg as Ken says in the INSTALL file. > Change the lines that read > Target[smtpad]: `/usr/local/bin/qmailmrtg7 a /var/log/smtp` > to read > Target[smtpad]: `/usr/local/sbin/qmailmrtg7 a /var/log/qmail/qmail-smtpd` > or whatever your directories are > and do so for the rest of them. > Worked fine for me. I did that :o) pop3, smtp, send - logfiles are in the tree of /var/log/qmail/ (/var/log/qmail/qmail-smtpd, qmail-pop3d, qmail-send) My qmail-send directory is empty (i'm using the scripts from LWQ from september 2000 ...) The following stats don't work : messtatus, bytes, concurrency, messages I think, the needed information is in my /var/log/maillog but i can't get the mrtg-script to read them out. Am i missing something? Thomas
Re: User over quota message
Hi, > chris wrote: >> >> Hello all, >> >> I've read the archive about this subject already, but still don't have a >> clear answer. I have hardquota set. I tested it and it worked correctly by >> bouncing a message > 1K back to the sender, while still allowing <1K >> messages to be delivered. >> >> What I haven't figured out is how to generate a message to the OWNER of the >> mail box that he/she is over quota and needs to clear out some mail. >> >> I saw other's ask this, but never saw a clear answer to that issue. I'd >> guess that the C code could be hacked to create an email to the owner at the >> same time as the "bounce" message, but that sounds more complicated than I >> think I can handle. > Sounds like a good feature. I do not need it myself. > How do we avoid sending a user multiple over quota > messages? Easy (i think ;) ): If the user is over quota, check for ~vpopmail/domain/user/.overquota file. If it doesn't exist, create it and the send the message to the owner. If it already exist, just bounce the message back (normal behavior). If the user isn't over quota anymore and the .overquota file exists, delete it. Thomas
auth problem
I inherited a Debian box with qmail and vpop and qmail admin installed. Everything was running fine at one point. It doesn't work now and gives this error back to the client: this user has no $HOME/Maildir I do know that the prior admin changed the users home directories to a different partition. It is using mysql for authentication. and those tables look ok. There is also the qmail admin package installed but the passwd for the postmaster is unknown. I'm considering re-compiling but wonder if perhaps there is an environment variable I could set. If so for what user? qmaild ? there is no source code for it on the machine. Any suggestions, hints, tips & flames appreciated. -- Tim Thomas www.remoteautomation.com
Re: auth problem
On Thu, Jun 28, 2001 at 06:16:49PM -0500, Tim Thomas wrote: > I inherited a Debian box with qmail and vpop and qmail admin installed. > Everything was running fine at one point. > It doesn't work now and gives this error back to the client: > this user has no $HOME/Maildir > I do know that the prior > admin changed the users home directories to a different partition. > It is using mysql for authentication. > and those tables look ok. > There is also the qmail admin package installed but the passwd for the > postmaster is unknown. > I'm considering re-compiling but wonder if perhaps there is an > environment variable I could set. If so for what user? qmaild ? > there is no source code for it on the machine. > Any suggestions, hints, tips & flames appreciated. more annoying details: hmmm the user exists and does have permission vpopmail:x:1015:1015:Virtual POP Account,,,:/web/vpopmail:/bin/bash drwxr-xr-x9 vpopmail vpopmail 4096 Jun 25 20:24 vpopmail/ http://vhost.remoteautomation.com/cgi-bin/qmailadmin/ -- Tim
Re: auth problem]
If he changed the home directories to a different partition, it's likely the home paths have changed..? This could affect /home/vpopmail (although I don't think you'd be getting as far as you are if that was the case). You say the MySQL tables look "OK", but did you verify the home directory listed in the pw_dir column goes to the current home directories? yes I believe that's ok mysql> select pw_name, pw_dir from vpopmail -> ; ++--+ | pw_name| pw_dir | ++--+ | postmaster | /web/vpopmail/domains/holycrosslutheranchurch.org/postmaster | | jodip | /web/vpopmail/domains/holycrosslutheranchurch.org/jodip | | pmel | /web/vpopmail/domains/holycrosslutheranchurch.org/pmel | | info | /web/vpopmail/domains/holycrosslutheranchurch.org/info | | dhunter| /web/vpopmail/domains/holycrosslutheranchurch.org/dhunter| | sermons| /web/vpopmail/domains/holycrosslutheranchurch.org/sermons| | peidsness | /web/vpopmail/domains/holycrosslutheranchurch.org/peidsness | | angies | /web/vpopmail/domains/holycrosslutheranchurch.org/angies | | pt | /web/vpopmail/domains/holycrosslutheranchurch.org/pt | | postmaster | /web/vpopmail/domains/mountaintop.org/postmaster | | troy | /web/vpopmail/domains/mountaintop.org/troy | | postmaster | /web/vpopmail/domains/garysgunshop.com/postmaster | | garys | /web/vpopmail/domains/garysgunshop.com/garys | | shannons | /web/vpopmail/domains/holycrosslutheranchurch.org/shannons axistance and perms: lyback:/web/remoteautomation/www/software# ll /web/vpopmail/domains/ total 12 drwx--4 vpopmail vpopmail 4096 Apr 3 09:15 garysgunshop.com/ lrwxrwxrwx1 root root 49 Mar 27 21:41 holycrossluthchurch.com -> /web/vpopmail/domains/holycrosslutheranchurch.org/ lrwxrwxrwx1 root root 49 Mar 27 21:41 holycrossluthchurch.org -> /web/vpopmail/domains/holycrosslutheranchurch.org/ drwx-- 12 vpopmail vpopmail 4096 Jun 24 17:20 holycrosslutheranchurch.org/ drwxr-xr-x5 vpopmail vpopmail 4096 May 14 21:03 mountaintop.org/ flyback:/web/remoteautomation/www/software# ls -lAFd drwxr-sr-x3 root www-data 4096 Apr 11 16:30 ./ flyback:/web/remoteautomation/www/software# ls -lAFd /web/vpopmail/domains/ drwx--5 vpopmail vpopmail 4096 May 14 21:02 /web/vpopmail/domains// any other thoughts ?
[vchkpw] Upgraded from old version to newest - Some domains have problems
There are over 100 domains on the server. Over half seem to be working just fine. A handful are not. For example, there's an email acct... [EMAIL PROTECTED] whenever i try to send mail to it Sorry, no mailbox here by that name but, its there in domains/domain2 as a pop3 account i did a vdeluser and vadduser same thing it shows up in qmailadmin but it cant receive mail nor can it login (pop3, sqwebmail, etc) I fixed this problem by doing a vdeldomain then vadddomain and recreating the accounts. However, this cannot be the best (only?) way to get these accounts to work again. I dont want to manually recreate 25 domains each with 100 users... then tell each user that they have a new password. Any thoughts? __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Re: [vchkpw] Urgent - vchkpw/vpopmail authenticate even with wrong pw?
Here's the configure command I used on 5.3.20 (after fixing the vchkpw.c problem as noted below: ./configure --enable-qmaildir=/var/qmail --enable-tcprules-prog=/usr/local/bin/tcprules --enable-learn-passwords=y --enable-tcpserver-file=/usr/home/vpopmail/etc/tcp.smtp --enable-defaultquota=1000 --enable-logging=e --enable-valias=y --enable-roaming-users =y --enable-relay-clear-minutes=30 --enable-mysql=y --enable-sqlincdir=/usr/local/include/mysql --enable-sqllibdir=/usr/local/lib/my sql --enable-default-domain=domain.com --enable-qmail-ext=y --prefix=/usr/home Anyone have thoughts on how to fix this? Thanks --- jeff thomas <[EMAIL PROTECTED]> wrote: > Ok... I tried this fix. > > I edited vchkpw.c and removed the FOOB and ENDIF. > recompiled. > > No luck. Same thing. Any password I put in still > works. > > Thoughts? > > --- Michael Bowe <[EMAIL PROTECTED]> wrote: > > I just remembered that learn-passwords was broken > in > > 5.3.20, and then > > eventually fixed in 5.3.24 > > > http://sourceforge.net/tracker/index.php?func=detail&aid=783824&group_id=85937&atid=577798 > > > > Maybe this has something to do with your problem? > > > > Michael. > > > > - Original Message - > > From: "jeff thomas" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 13, 2003 6:47 PM > > Subject: Re: [vchkpw] Urgent - vchkpw/vpopmail > > authenticate even with wrong > > pw? > > > > > > > Learn passwords was enabled. However, it should > > learn > > > only the FIRST password entered for each > > account > > > not multiple passwords for each account. > > > > > > Right? > > > > > > It would seem logical that with learn-passwords, > > the > > > first time i put in the password for [EMAIL PROTECTED], > it > > > "learns" that password. If I try to log into > > [EMAIL PROTECTED] > > > with a different password, I should be rejected, > > as it > > > "learned" the first password. > > > > > > > > > > > > > > > --- Michael Bowe <[EMAIL PROTECTED]> wrote: > > > > I could be barking up the wrong tree here > but... > > > > > > > > Perhaps did you configure vpopmail to "learn > > > > passwords" ? > > > > > > > > It rings a bell for me that if you upgrade > from > > an > > > > v4.x vpopmail, and you > > > > enable clear passwords in your v5.2 vpopmail, > > you > > > > loose all your existing > > > > passwords and the general way to recover from > > this > > > > is to enable vpopmail's > > > > "learn passwords" functionality > > > > > > > > This could explain why "any password works". > But > > > > then again, once the > > > > password has been learned, you shouldn't be > able > > to > > > > go back and use some > > > > other password and still get access > > > > > > > > Michael. > > > > > > > > > > > > - Original Message - > > > > From: "jeff thomas" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, August 13, 2003 10:15 AM > > > > Subject: [vchkpw] Urgent - vchkpw/vpopmail > > > > authenticate even with wrong pw? > > > > > > > > > > > > > Hello - > > > > > > > > > > I recently installed vpopmail 5.3.20 from > > freebsd > > > > > ports. I used Matt Simerson's FreeBSD Qmail > > > > Toaster > > > > > scripts to install it (it uses ports). > > > > > > > > > > > > > > > That installed without problem. I installed > > > > > courier-imap and squirrelmail as well as > > > > sqwebmail. I > > > > > noticed today that I can log into any of the > > > > accounts > > > > > via sqwebmail with any password. I can > > literally > > > > put > > > > > in "xxx" for the password on my e-mail > account > > and > > > > it > > > > > will let me in. I tried it on squirrelmail > > with > > > > the > > > > > same problem. So, then I tried simply > logging > > into > > > > the > > > > > POP3 account with "xyz" as the password. It, > > too, > > > > let > > > > > me in with full access. > > > > > > > > > > This is bad - obviously. Anyone care to shed > > some > > > > > light on what I need to do to get this fixed > > ASAP. > > > > I > > > > > upgraded from 4.9.x and use mysql4 for > > > > authentication. > > > > > > > > > > Any and all help is appreciated. > > > > > > > > > > __ > > > > > Do you Yahoo!? > > > > > Yahoo! SiteBuilder - Free, easy-to-use web > > site > > > > design software > > > > > http://sitebuilder.yahoo.com > > > > > > > > > > > > > > > > > > > > > > > > > > > __ > > > Do you Yahoo!? > > > Yahoo! SiteBuilder - Free, easy-to-use web site > > design software > > > http://sitebuilder.yahoo.com > > > > > > > > > > > > > __ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com > __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Re: [vchkpw] Urgent - vchkpw/vpopmail authenticate even with wrong pw?
Ok... I tried this fix. I edited vchkpw.c and removed the FOOB and ENDIF. recompiled. No luck. Same thing. Any password I put in still works. Thoughts? --- Michael Bowe <[EMAIL PROTECTED]> wrote: > I just remembered that learn-passwords was broken in > 5.3.20, and then > eventually fixed in 5.3.24 > http://sourceforge.net/tracker/index.php?func=detail&aid=783824&group_id=85937&atid=577798 > > Maybe this has something to do with your problem? > > Michael. > > ----- Original Message - > From: "jeff thomas" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 13, 2003 6:47 PM > Subject: Re: [vchkpw] Urgent - vchkpw/vpopmail > authenticate even with wrong > pw? > > > > Learn passwords was enabled. However, it should > learn > > only the FIRST password entered for each > account > > not multiple passwords for each account. > > > > Right? > > > > It would seem logical that with learn-passwords, > the > > first time i put in the password for [EMAIL PROTECTED], it > > "learns" that password. If I try to log into > [EMAIL PROTECTED] > > with a different password, I should be rejected, > as it > > "learned" the first password. > > > > > > > > > > --- Michael Bowe <[EMAIL PROTECTED]> wrote: > > > I could be barking up the wrong tree here but... > > > > > > Perhaps did you configure vpopmail to "learn > > > passwords" ? > > > > > > It rings a bell for me that if you upgrade from > an > > > v4.x vpopmail, and you > > > enable clear passwords in your v5.2 vpopmail, > you > > > loose all your existing > > > passwords and the general way to recover from > this > > > is to enable vpopmail's > > > "learn passwords" functionality > > > > > > This could explain why "any password works". But > > > then again, once the > > > password has been learned, you shouldn't be able > to > > > go back and use some > > > other password and still get access > > > > > > Michael. > > > > > > > > > - Original Message - > > > From: "jeff thomas" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 13, 2003 10:15 AM > > > Subject: [vchkpw] Urgent - vchkpw/vpopmail > > > authenticate even with wrong pw? > > > > > > > > > > Hello - > > > > > > > > I recently installed vpopmail 5.3.20 from > freebsd > > > > ports. I used Matt Simerson's FreeBSD Qmail > > > Toaster > > > > scripts to install it (it uses ports). > > > > > > > > > > > > That installed without problem. I installed > > > > courier-imap and squirrelmail as well as > > > sqwebmail. I > > > > noticed today that I can log into any of the > > > accounts > > > > via sqwebmail with any password. I can > literally > > > put > > > > in "xxx" for the password on my e-mail account > and > > > it > > > > will let me in. I tried it on squirrelmail > with > > > the > > > > same problem. So, then I tried simply logging > into > > > the > > > > POP3 account with "xyz" as the password. It, > too, > > > let > > > > me in with full access. > > > > > > > > This is bad - obviously. Anyone care to shed > some > > > > light on what I need to do to get this fixed > ASAP. > > > I > > > > upgraded from 4.9.x and use mysql4 for > > > authentication. > > > > > > > > Any and all help is appreciated. > > > > > > > > __ > > > > Do you Yahoo!? > > > > Yahoo! SiteBuilder - Free, easy-to-use web > site > > > design software > > > > http://sitebuilder.yahoo.com > > > > > > > > > > > > > > > > > > > > __ > > Do you Yahoo!? > > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > > http://sitebuilder.yahoo.com > > > > > > __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Re: [vchkpw] Urgent - vchkpw/vpopmail authenticate even with wrong pw?
Ok... What the hell ... I just compiled 5.3.24 WITHOUT learn-passwords. Installed it. Restarted all mail services. I can STILL log into any account with any password. Someone here must be able to shed some light on this for me?? Please? --- jeff thomas <[EMAIL PROTECTED]> wrote: > Ok... > > So, I just compiled 5.3.24 and installed it. I used > the following configure line: > > ./configure --enable-qmaildir=/var/qmail > --enable-tcprules-prog=/usr/local/bin/tcprules > --enable-learn-passwords=y > --enable-tcpserver-file=/usr/home/vpopmail/etc/tcp.smtp > --enable-defaultquota=1000 --enable-logging=e > --enable-valias=y --enable-roaming-users=y > --enable-relay-clear-minutes=30 --enable-mysql=y > --enable-sqlincdir=/usr/local/include/mysql > --enable-sqllibdir=/usr/local/lib/mysql > --enable-default-domain=domain.com > --enable-qmail-ext=y --prefix=/usr/home > > > Same freaking problem. I can log into all of the > accounts with any password. Thoughts? > > > > --- jeff thomas <[EMAIL PROTECTED]> wrote: > > Ok... I tried this fix. > > > > I edited vchkpw.c and removed the FOOB and ENDIF. > > recompiled. > > > > No luck. Same thing. Any password I put in still > > works. > > > > Thoughts? > > > > --- Michael Bowe <[EMAIL PROTECTED]> wrote: > > > I just remembered that learn-passwords was > broken > > in > > > 5.3.20, and then > > > eventually fixed in 5.3.24 > > > > > > http://sourceforge.net/tracker/index.php?func=detail&aid=783824&group_id=85937&atid=577798 > > > > > > Maybe this has something to do with your > problem? > > > > > > Michael. > > > > > > - Original Message - > > > From: "jeff thomas" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 13, 2003 6:47 PM > > > Subject: Re: [vchkpw] Urgent - vchkpw/vpopmail > > > authenticate even with wrong > > > pw? > > > > > > > > > > Learn passwords was enabled. However, it > should > > > learn > > > > only the FIRST password entered for each > > > account > > > > not multiple passwords for each account. > > > > > > > > Right? > > > > > > > > It would seem logical that with > learn-passwords, > > > the > > > > first time i put in the password for > [EMAIL PROTECTED], > > it > > > > "learns" that password. If I try to log into > > > [EMAIL PROTECTED] > > > > with a different password, I should be > rejected, > > > as it > > > > "learned" the first password. > > > > > > > > > > > > > > > > > > > > --- Michael Bowe <[EMAIL PROTECTED]> > wrote: > > > > > I could be barking up the wrong tree here > > but... > > > > > > > > > > Perhaps did you configure vpopmail to "learn > > > > > passwords" ? > > > > > > > > > > It rings a bell for me that if you upgrade > > from > > > an > > > > > v4.x vpopmail, and you > > > > > enable clear passwords in your v5.2 > vpopmail, > > > you > > > > > loose all your existing > > > > > passwords and the general way to recover > from > > > this > > > > > is to enable vpopmail's > > > > > "learn passwords" functionality > > > > > > > > > > This could explain why "any password works". > > But > > > > > then again, once the > > > > > password has been learned, you shouldn't be > > able > > > to > > > > > go back and use some > > > > > other password and still get access > > > > > > > > > > Michael. > > > > > > > > > > > > > > > - Original Message - > > > > > From: "jeff thomas" <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Wednesday, August 13, 2003 10:15 AM > > > > > Subject: [vchkpw] Urgent - vchkpw/vpopmail > > > > > authenticate even with wrong pw? > > > > > > > > > > > > > > > > Hello - > > > > > > > > > > > > I recently installed vpopmail 5.3.20 from > > > fre
[vchkpw] Urgent - vchkpw/vpopmail authenticate even with wrong pw?
Hello - I recently installed vpopmail 5.3.20 from freebsd ports. I used Matt Simerson's FreeBSD Qmail Toaster scripts to install it (it uses ports). That installed without problem. I installed courier-imap and squirrelmail as well as sqwebmail. I noticed today that I can log into any of the accounts via sqwebmail with any password. I can literally put in "xxx" for the password on my e-mail account and it will let me in. I tried it on squirrelmail with the same problem. So, then I tried simply logging into the POP3 account with "xyz" as the password. It, too, let me in with full access. This is bad - obviously. Anyone care to shed some light on what I need to do to get this fixed ASAP. I upgraded from 4.9.x and use mysql4 for authentication. Any and all help is appreciated. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
Re: [vchkpw] Urgent - vchkpw/vpopmail authenticate even with wrong pw?
Learn passwords was enabled. However, it should learn only the FIRST password entered for each account not multiple passwords for each account. Right? It would seem logical that with learn-passwords, the first time i put in the password for [EMAIL PROTECTED], it "learns" that password. If I try to log into [EMAIL PROTECTED] with a different password, I should be rejected, as it "learned" the first password. --- Michael Bowe <[EMAIL PROTECTED]> wrote: > I could be barking up the wrong tree here but... > > Perhaps did you configure vpopmail to "learn > passwords" ? > > It rings a bell for me that if you upgrade from an > v4.x vpopmail, and you > enable clear passwords in your v5.2 vpopmail, you > loose all your existing > passwords and the general way to recover from this > is to enable vpopmail's > "learn passwords" functionality > > This could explain why "any password works". But > then again, once the > password has been learned, you shouldn't be able to > go back and use some > other password and still get access > > Michael. > > > - Original Message - > From: "jeff thomas" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 13, 2003 10:15 AM > Subject: [vchkpw] Urgent - vchkpw/vpopmail > authenticate even with wrong pw? > > > > Hello - > > > > I recently installed vpopmail 5.3.20 from freebsd > > ports. I used Matt Simerson's FreeBSD Qmail > Toaster > > scripts to install it (it uses ports). > > > > > > That installed without problem. I installed > > courier-imap and squirrelmail as well as > sqwebmail. I > > noticed today that I can log into any of the > accounts > > via sqwebmail with any password. I can literally > put > > in "xxx" for the password on my e-mail account and > it > > will let me in. I tried it on squirrelmail with > the > > same problem. So, then I tried simply logging into > the > > POP3 account with "xyz" as the password. It, too, > let > > me in with full access. > > > > This is bad - obviously. Anyone care to shed some > > light on what I need to do to get this fixed ASAP. > I > > upgraded from 4.9.x and use mysql4 for > authentication. > > > > Any and all help is appreciated. > > > > __ > > Do you Yahoo!? > > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > > http://sitebuilder.yahoo.com > > > > > > __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
[vchkpw] vadddomain failure
Hi, I'm having trouble with the vadddomain command. It gives me this error, when i try to add a domain # vadddomain testdomain.com 123test Failure while attempting to remove_line() the locals file Error. Failed to add domain to assign file Error: Could not update file I'm using the debian packages from http://linux.myspinach.org/debian , which of course means that I'm not really sure, where the problem is. I have installed the following versions vpopmail-bin 5.3.26-1 libvpopmail-dev 5.3.26-1 libvpopmail1 5.3.26-1 libvpopmail-freecdb 5.3.26-1 qmail 1.03-27 I hope that either someone else found a solutions to this problem or that this is simply a bug, that hopefully will be solved :) Regards, Thomas Ledet
Re: [vchkpw] vadddomain failure
martin wrote: is this a new install? please excuse me as I am not trying to offend...but just want to make sure we are in the right place and such. No, this is not a new install and I've had no problems before /home/vpopmail/bin (or where ever your vpopmail home dir is) and do ./vadddomain..so like below... the vpopmail homedir is /var/vpopmail #./vadddmomain testdmomain.com 123test I get the exact same result and I don't really see what diffence it should make Regards, Thomas Ledet
Re: [vchkpw] vadddomain failure
X-Istence wrote: I really suggest you get up to date. vpopmail development is at 5.3.28, and the problem you are having could allready have been fixed. That is true. I'll forward your comment to the package maintainer. Regards, Thomas Ledet
[vchkpw] vpopmail variable
I'm not sure if this is a Maildrop or vpopmail issue. vpopmail 5.4-rc1 Maildrop 1.5.2 FreeBSD 4.4 My .qmail-default pipes all inbound mail to maildrop using the following command: | /usr/local/bin/maildrop .qmail-default-mailfilter The mailfilter file contains the following variable (among others): VHOME=`/usr/local/vpopmail/bin/vuserinfo -d [EMAIL PROTECTED] This doesn't seem to be working as I maildrop errors out because it can't find the home directory. What I haven't been able to find about vpopmail is whether or not it sets certain variable that can be used in .qmail or .mailfilter scripts. Are these variable available and, if so, where can I find a list of them?
Re: [vchkpw] vpopmail variable
Brian Lanier wrote: I ran into this problem before and always figured it was a problem on the handoff between qmail and maildrop. If I remember correctly the $EXT and $HOST are qmail environment variables, someone can correct me if I am wrong. In my case the $EXT variable was not being set. We initially had a clumsy awk command to manually set the line. Once we upgraded Maildrop the problem went away. To test try spitting the values to a log file with something like the following in your maildrop filter: logfile "/usr/local/vpopmail/maildroplog" log "EXT is $EXT" log "HOST is $HOST" log "VHOME is $VHOME" Of course put the VHOME log line after the line where you set it... I am currently using maildrop 1.6.3. As far as I know in this configuration, vpopmail doesn't have much to do with these variables other than trying to use them in the VHOME line. Hope this helps in some way. I never could find any info on this and just worked around until one day it started working after an upgrade. Thanks, this worked out great. All of the variable are being defined correctly.
[vchkpw] Re: Vpopmail MySQL Table Layouts
Jeff Koch writes: Are the MySQL table layouts documented anywhere? I went all through the doc's and source but maybe someone could give me a pointer please. Thanks Have you looked in the source directory? There's a file called README.mysql. It refers to another file called vmysql.h--this contains the information you seek.
[vchkpw] Re: spamassassin patch ready ahead of schedule
Ken Jones writes: On Saturday 17 January 2004 6:03 pm, Raboo Treed wrote: is this a feature that will be added to vpopmail permantly?? if not now it should be in contrib on the stable i think Yep, it will be added permanently. Two questions: 1) Does this patch effect custom .qmail-default files? Or any other .qmail or .mailfilter files? 2) I saw on a previous post that spam filtering can be disabled for a specific user, but what about for an entire domain?
[vchkpw] smtp-auth woes
All: Many seem to achieve smtp-auth, but I haven't yet, and the natives are getting restless. Vpopmail itself has been running successfully for multiple domains for several months. I've tried serveral configurations with vpopmail, always followed by rebuilding "ucspi-tcp-0.88" because of a library file reference I read. Some configs used the CDB file in its "etc" directory, and others tried mysql's "lastauth" and "relay" tables. The CDB file seems to never be updated, and the "lastauth" table had either "0.0.0.0" or just a blank "" in the "remote_ip" column, but the "timestamp" column was being updated. The "relay" table never appeared to have any records. I have used pop3 through xinetd and courier-imap with the above results being consistant. Browsing the code, the web, and these archives lead me to think that the "TCPREMOTEIP" enviroment variable isn't being filled, but I couldn't find any specific answers. Latest vpopmail config: ./configure --enable-mysql=y --enable-mysql-logging=y --enable-valias=y --enable-roaming-users=y \ --enable-relay-clear-minutes=120 --enable-mysql-limits=y --enable-many-domains=n --enable-logging=e \ --enable-tcpserver-file=/home/vpopmail/etc/tcp.smtp --enable-tcprules-prog=/usr/local/bin/tcprules Pointers, ideas, and / or solid clues would be greatly appreciated. Thom Campbell
[vchkpw] qmailadmin: File permission error
I have qmailadmin install running for 6 months without problems. Somehow have this error: file permission error /var/vmail/domains/example.com/postmaster/Maildir/1077057747.qw i haven't changed anything within the filesystem, such as permission, locations, etc, that would cause such a problem. Has anyone experienced such a problem? Thomas
Re: [vchkpw] qmailadmin: File permission error
There is no such file. I tried logging in as different domain and i'm having the same problems. They, too, have no such file. Thomas On 17-Feb-04, at 6:35 PM, Tom Collins wrote: On Feb 17, 2004, at 4:01 PM, Thomas Madej wrote: I have qmailadmin install running for 6 months without problems. Somehow have this error: file permission error /var/vmail/domains/example.com/postmaster/Maildir/1077057747.qw i haven't changed anything within the filesystem, such as permission, locations, etc, that would cause such a problem. Has anyone experienced such a problem? What are permissions on that file? What happens if you delete it (which is OK, it's just a session file) and re-login? -- Tom Collins - [EMAIL PROTECTED] QmailAdmin: http://qmailadmin.sf.net/ Vpopmail: http://vpopmail.sf.net/ Info on the Sniffter handheld Network Tester: http://sniffter.com/
Re: [vchkpw] PHP extension for vpopmail
On 22-Feb-04, at 7:29 PM, Marcin Soltysiak wrote: o Start a separate instance of Apache on its own port or IP address, running as the mail user. This instance should only serve mail related pages. This is very easy to do. o Don't allow any web sites on the mail server. Only run QmailAdmin and sqWebmail on the mail server, and don't allow anyone but mail system administrators to login on the machine. (This is the one I use.) Didn't you ever heard about "sudo"? Using sudo you may allow the apache's user to run commands (that you specify) as the vpopmail's user. I did it once, it isn't hard. I also believe that's more secure, since the vpopmail's user will be used only weh necessary (to run some commands) and not all the time (to run apache). sudo with PHP extension? When PHP is a module? How? Solt Via PHP's CGI module. Thomas
Re: [vchkpw] PHP extension for vpopmail
On 22-Feb-04, at 8:04 PM, Rick Widmer wrote: Thomas Madej wrote: On 22-Feb-04, at 7:29 PM, Marcin Soltysiak wrote: sudo with PHP extension? When PHP is a module? How? Solt Via PHP's CGI module. Please try it and let me know how it works! Personally, I am quite happy keeping general web sites off the mail server, and running PHP as an Apache module. I _think_ it should work under CGI, but I don't use PHP as CGI, and don't even know where to start to configure it in. If no one else doe it, I will eventually get to trying this with CGI, but don't hold your breath. QmailAdmin 1.3 will be released before I spend any time on it. If you do try it and have problems I will help you, but unless someone else is actively involved it will remain a very low on my priority list. What about SUID on the script file? That might work too. Rick You just need the proper script header and the proper entries in /etc/sudoers. I think the following header would work: #!/usr/bin/sudo -u vpopmailuser /usr/bin/php but then again, running another server is probably more secure than this method. Thomas Madej Furi Enterprises http://furi.ca/
Re: [vchkpw] PHP extension for vpopmail
ProxyPass /mailserver http://mailserver:port/ Put that in your virtual host Thomas Madej Furi Enterprises http://furi.ca/ On 1-Mar-04, at 4:07 AM, [EMAIL PROTECTED] wrote: Eduardo M. Bragatto wrote: Rick Widmer wrote: There are two ways to run the extension that I know of. o Start a separate instance of Apache on its own port or IP address, running as the mail user. This instance should only serve mail related pages. This is very easy to do. o Don't allow any web sites on the mail server. Only run QmailAdmin and sqWebmail on the mail server, and don't allow anyone but mail system administrators to login on the machine. (This is the one I use.) I've got a question. If one runs such a dedicated apache-instance (uid=vpopmail) on a more or less random port bound to localhost - would it be possible to reverse-proxy your script through the main instance on port 80/443 ? Generally, this works best when the site uses no JavaScript and only relative links. That would keep the "single system image" to end-users and administrators. cheers, Rainer
Re: [vchkpw] PHP extension for vpopmail
Assuming you use Apache of course : > Thomas Madej Furi Enterprises http://furi.ca/ On 1-Mar-04, at 4:07 AM, [EMAIL PROTECTED] wrote: Eduardo M. Bragatto wrote: Rick Widmer wrote: There are two ways to run the extension that I know of. o Start a separate instance of Apache on its own port or IP address, running as the mail user. This instance should only serve mail related pages. This is very easy to do. o Don't allow any web sites on the mail server. Only run QmailAdmin and sqWebmail on the mail server, and don't allow anyone but mail system administrators to login on the machine. (This is the one I use.) I've got a question. If one runs such a dedicated apache-instance (uid=vpopmail) on a more or less random port bound to localhost - would it be possible to reverse-proxy your script through the main instance on port 80/443 ? Generally, this works best when the site uses no JavaScript and only relative links. That would keep the "single system image" to end-users and administrators. cheers, Rainer
[vchkpw] vchkpw seg faults
Running Matt Simerson's toaster (v3.37) on an amd64/fBSD 5.2.1 box and everything appears to work except smtp auth. Anytime a user attempts to send e-mail auth fails, and the following is logged to /var/log/messages Mar 17 08:47:14 odysseus kernel: pid 1492 (vchkpw), uid 89: exited on signal 11 Everything seemed to compile fine, is this an amd64 specific issue? I see no other problems, adding domains and users works fine, and sending mail from cli works fine. Also IMAP auth's just fine. Thanks in advance! Tom
Re: [vchkpw] vchkpw seg faults
PS. I have a couple other toasters up and running on 4.9, 32bit x86, and 1 on 5.2 that are all working ok. On Wed, 2004-03-17 at 12:56, Thomas Hudak wrote: > Running Matt Simerson's toaster (v3.37) on an amd64/fBSD 5.2.1 box and > everything appears to work except smtp auth. Anytime a user attempts to > send e-mail auth fails, and the following is logged to /var/log/messages > > Mar 17 08:47:14 odysseus kernel: pid 1492 (vchkpw), uid 89: exited on > signal 11 > > Everything seemed to compile fine, is this an amd64 specific issue? I > see no other problems, adding domains and users works fine, and sending > mail from cli works fine. Also IMAP auth's just fine. > > Thanks in advance! > Tom >
Re: [vchkpw] vchkpw seg faults
On Wed, 2004-03-17 at 14:46, Tom Collins wrote: > Maybe a softlimit issue on your qmail-smtpd process? > > What version of vpopmail? > 5.4.2
[vchkpw] vchkpw-smtp: system user shadow entry not found
hello, I try to use smtp-auth for system user but I get: 535 authorization failed (#5.7.0) if I use the same user/password for the pop3 login, it works fine. I compile vpopmail with: ./configure --enable-passwd --enable-logging=v so vchkpw can read the /etc/passwd. /var/log/mail tells me: May 11 10:43:57 mailgate vpopmail[17957]: vchkpw-smtp: system user shadow entry not found :127.0.0.1 where is my mistake - or do you need any additional informations? thanks in advance -- Thomas Koenig smime.p7s Description: S/MIME cryptographic signature
RE: [vchkpw] vchkpw-smtp: system user shadow entry not found
hmmm, I found something if I set the /etc/shadow to 644 it runs, but it's a big security hole. now I change it back to 640 (root:shadow) and put for test all these users: qmaild,qmaill,qmailp,qmailq,qmailr,qmails,vpopmail in the shadow group, but it doesnt work. whats that??? thomas > -Original Message- > From: Koenig, Thomas [mailto:[EMAIL PROTECTED] > Sent: Wednesday, May 11, 2005 10:57 AM > To: vchkpw@inter7.com > Subject: [vchkpw] vchkpw-smtp: system user shadow entry not found > > > hello, > > I try to use smtp-auth for system user but I get: > 535 authorization failed (#5.7.0) > > if I use the same user/password for the pop3 login, it works fine. > > I compile vpopmail with: > ./configure --enable-passwd --enable-logging=v > so vchkpw can read the /etc/passwd. > > /var/log/mail tells me: > May 11 10:43:57 mailgate vpopmail[17957]: vchkpw-smtp: system user > shadow entry not found :127.0.0.1 > > where is my mistake - or do you need any additional informations? > > > > > thanks in advance > -- > Thomas Koenig > > > smime.p7s Description: S/MIME cryptographic signature
RE: [vchkpw] vchkpw-smtp: system user shadow entry not found
great it works. thx thomas > -Original Message- > From: Rene [mailto:[EMAIL PROTECTED] > Sent: Wednesday, May 11, 2005 1:44 PM > To: vchkpw@inter7.com > Subject: Re: [vchkpw] vchkpw-smtp: system user shadow entry not found > > > 1. chown root:vpopmail vchkpw > 2. set setuid > > > Rene > - Original Message - > From: "Koenig, Thomas" <[EMAIL PROTECTED]> > To: > Sent: Wednesday, May 11, 2005 11:50 AM > Subject: RE: [vchkpw] vchkpw-smtp: system user shadow entry not found > > > > hmmm, > > > > I found something > > if I set the /etc/shadow to 644 it runs, but it's a big > > security hole. > > > > now I change it back to 640 (root:shadow) and put for test all these > > users: qmaild,qmaill,qmailp,qmailq,qmailr,qmails,vpopmail in the > > shadow group, but it doesnt work. > > > > whats that??? > > > > thomas > > > >> -Original Message- > >> From: Koenig, Thomas [mailto:[EMAIL PROTECTED] > >> Sent: Wednesday, May 11, 2005 10:57 AM > >> To: vchkpw@inter7.com > >> Subject: [vchkpw] vchkpw-smtp: system user shadow entry not found > >> > >> > >> hello, > >> > >> I try to use smtp-auth for system user but I get: > >> 535 authorization failed (#5.7.0) > >> > >> if I use the same user/password for the pop3 login, it works fine. > >> > >> I compile vpopmail with: > >> ./configure --enable-passwd --enable-logging=v > >> so vchkpw can read the /etc/passwd. > >> > >> /var/log/mail tells me: > >> May 11 10:43:57 mailgate vpopmail[17957]: vchkpw-smtp: system user > >> shadow entry not found :127.0.0.1 > >> > >> where is my mistake - or do you need any additional informations? > >> > >> > >> > >> > >> thanks in advance > >> -- > >> Thomas Koenig > >> > >> > >> > > > smime.p7s Description: S/MIME cryptographic signature
[vchkpw] Problems authentication users with Courier IMAP
Hello List,I'm new to mail servers, please bear with me if this is trivial. I've installed qmail, qmailadmin and vpopmail. That seemed to work fine. The mail server was running, and I could foreward emails, like I wanted. Though I wanted to get a webmail running, so I installed Courier IMAP, in order to use squirrelmail. This however stopped to mail forewarding. (?) I wanted to be able to use the users I created with vpopmail in the IMAP server, but there seems to be an authentication problem. Courier IMAP cannot "see" the users that I created with vpopmail. When I try to login to the IMAP server i get: Escape character is '^]'.* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information. . login [EMAIL PROTECTED] 12345678. NO Login failed.I've changed the authmodulelist in the authdaemonrc file to: authmodulelist="authvchkpw"And I've tied this as well: authmodulelist="authuserdb authpam authpgsql authldap authmysql authcustom authpipe authvchkpw"Doesent change anything. The maillog says this:Feb 21 16:54:41 localhost authdaemond: Installing libauthuserdb Feb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:54:41 localhost authdaemond: Installing libauthpamFeb 21 16:54:41 localhost authdaemond: Installation complete: authpamFeb 21 16:54:41 localhost authdaemond: Installing libauthpgsql Feb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:54:41 localhost authdaemond: Installing libauthldapFeb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:54:41 localhost authdaemond: Installing libauthmysql Feb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:54:41 localhost authdaemond: Installing libauthcustomFeb 21 16:54:41 localhost authdaemond: Installation complete: authcustomFeb 21 16:54:41 localhost authdaemond: Installing libauthpipe Feb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:54:41 localhost authdaemond: Installing libauthvchkpwFeb 21 16:54:41 localhost authdaemond: file not foundFeb 21 16:55:03 localhost imapd: Connection, ip=[::: 127.0.0.1]Feb 21 16:55:03 localhost imapd: LOGIN FAILED, [EMAIL PROTECTED], ip=[::: 127.0.0.1]Feb 21 16:55:08 localhost imapd: LOGOUT, ip=[::: 127.0.0.1]Everytime I try to login to the server. Is there any one here that might have a solution? It would be appreciated.Yours,Thomas
[vchkpw] Trouble on FreeBSD
Hi, I have some trouble running chkuser on one of our FreeBSD 5-boxes. Further setup info: vpopmail-devel, smtp_auth & tls-patches. It compiles against a vanilla qmail 1.03 quite fine after manually patching the qmail sources. After replacing qmail-smtpd I can send Mails through qmail-smtpd to domains listed in rcpthosts/morercpthosts and the patch works, invalid recipients are not accepted. TLS und the AUTH-patches work, too, but: While trying to send a eMail to an external address I get a "unable to read controls" - error. Of course I had a look at the permissions of qmail/controls, I think there should be no problem with it. Is it possible that the relaying-information is lost somehow? Any hints? Thanks in advance, Thomas -- Thomas Eisenbarth infodatacom GbR Dominik Ach, Thomas Eisenbarth, Thomas Krepkowski Fendelsring 19, 86609 Donauwörth Tel.: +49 (9 06) 9 99 97 02 Fax: +49 (9 06) 9 99 97 05 E-Mail: [EMAIL PROTECTED] WWW: http://www.infodatacom.de
[vchkpw] Check after compile perfect, yet does not work
Sorry for the strange topic. I have patched netqmail-1.0.5 manual with chkuser. compiled without any errors. I use the defauls setting (as they seem to fit what i need). I have one domain -domain44.be- which has a catch all address and one -liberty.be- which does not have a catch all address. the default domains .qmail-default contains: | /home/vpopmail/bin/vdelivermail/ '' bounce-no-mailbox the liberty.be/.qmail-default file contains: | /home/vpopmail/bin/vdelivermail/ '' bounce-no-mailbox the domain44.be/.qmail-default file contains: | /home/vpopmail/bin/vdelivermail '' /home/vpopmail/domains/domain44.be/__catch__all__ if running ./qmail-smtpd from the compile dir all works perfect: mail from: [EMAIL PROTECTED] CHKUSER accepted sender: from <[EMAIL PROTECTED]::> remote <:unknown:unknown> rcpt <> : sender accepted 250 ok rcpt to: [EMAIL PROTECTED] CHKUSER accepted any rcpt: from <[EMAIL PROTECTED]::> remote <:unknown:unknown> rcpt <[EMAIL PROTECTED]> : accepted any recipient for this domain (the catch all in action) 250 ok rcpt to: [EMAIL PROTECTED] CHKUSER rejected rcpt: from <[EMAIL PROTECTED]::> remote <:unknown:unknown> rcpt <[EMAIL PROTECTED]> : not existing recipient 550 5.1.1 sorry, no mailbox here by that name (chkuser) (no catch all so rejected) Perfect till there. Now i (re)start qmail which was stopped before recompiling. I send OK => @400046cacde206b769ec CHKUSER accepted any rcpt: from <[EMAIL PROTECTED]::> remote <:hoboi3bl4.telenet-ops.be:195.130.137.79> rcpt <[EMAIL PROTECTED]> : accepted any recipient for this domain Not OK => @400046cacdfe395888cc CHKUSER accepted any rcpt: from <[EMAIL PROTECTED]::> remote <:nocme2bl3.telenet-ops.be:195.130.132.35> rcpt <[EMAIL PROTECTED]> : accepted any recipient for this domain I have been looking at it all morning and can't quite get my head around it, must be something smallish and stupid yet very frustrating. Any help is greatly apreciated. Regard Thomas
[vchkpw] configuring vpopmail with mysql
Hi When I add --enable-mysql=y to the configure script, I get "configure: error: Unable to find your inc dir, specify --enable-incdir." The sparse help tells me this should point to the auth files, but where can I find those? (And why doesn't it find them itself on my installation... ? ) Thanks, - Thomas
[vchkpw] make error
Hi again, another problem: After doing ./configure --enable-roaming-users=y --enable-logging=y --enable-learn-passw ords=y --enable-clear-passwd=y --enable-defalt-domain=inrack.com --enable-my sql --enable-defaultquota=20M [EMAIL PROTECTED] --e nable-incdir=/usr/include/mysql --enable-libdir=/usr/lib/mysql/ It gives me this: vpopmail 5.3.12 Current settings --- vpopmail directory = /home/vpopmail uid = 515 gid = 510 ip alias = OFF --enable-ip-alias-domains=n (default) address extentions = OFF --enable-qmail-ext=n (default) roaming users = ON --enable-roaming-users=y tcpserver file = /etc/tcp.smtp open_smtp file = /home/vpopmail/etc/open-smtp user quota = 20M -enable-hardquota=20M auth module = mysql --enable-mysql=y mysql replication = OFF --enable-mysql-replication=n default table optimization = many domains --enable-many-domains=y default system passwords = OFF --enable-passwd=n default file locking = ON --enable-file-locking=y default file sync = OFF --enable-file-sync=n default disable vdelivermail fsync make seekable = ON --enable-make-seekable=y default auth logging = ON --enable-auth-logging=y default mysql logging = OFF --enable-mysql-logging=n default clear passwd = ON --enable-clear-passwd=y (default) users big dir = ON --enable-users-big-dir=y (default) valias processing = OFF --enable-valias=n mysql limits = OFF --enable-mysql-limits=n default pop syslog = show successful and failure login attempts --enable-logging=y default domain = --enable-default-domain= auth inc = -I/usr/include/mysql auth lib = -L/usr/lib/mysql/ -lmysqlclient -lz After typing 'make', is get (just the last part of it): vlimits.c: In function `vget_limits': vlimits.c:100: warning: assignment makes integer from pointer without a cast rm -f libvpopmail.a ar cru libvpopmail.a vpopmail.o md5.o bigdir.o vauth.o file_lock.o vpalias.o seek.o vlimits.o cdb/*.o ranlib libvpopmail.a gcc -I. -I/usr/include/mysql -g -O2 -Wall -c vchkpw.c gcc -I. -I/usr/include/mysql -g -O2 -Wall -c hmac_md5.c gcc -g -O2 -Wall -o vchkpw vchkpw.o md5.o hmac_md5.o libvpopmail.a -L/usr/lib/mysql -lmysqlclient -lz -lnsl -lcrypt -lm /usr/bin/ld: cannot find -lz collect2: ld returned 1 exit status make[2]: *** [vchkpw] Error 1 make[2]: Leaving directory `/var/src/vpopmail-5.3.12' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/src/vpopmail-5.3.12' make: *** [all-recursive-am] Error 2 libz resides in /usr/lib/ What's wrong ? Thanks.
Re: [vchkpw] make error
ldconfig -p |grep libz gives.. libzvt.so.2 (libc6) => /usr/lib/libzvt.so.2 libz.so.1 (libc6) => /usr/lib/libz.so.1 So yeah, it does.. :/ - Original Message - From: "Peter Palmreuther" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 19, 2002 4:02 PM Subject: Re: [vchkpw] make error > Hi Thomas, > > On Thu, 19 Dec 2002 15:31:31 +0100 > "Thomas Stian Bergheim" <[EMAIL PROTECTED]> wrote: > > > /usr/bin/ld: cannot find -lz > [...] > > libz resides in /usr/lib/ What's wrong ? > > I don't know. > > Does a 'ldconfig -p' show 'libz.so' too? > If not you maybe might want to update your ld-cache by running > "ldconfig"??? > -- > Peter > >
Re: [vchkpw] make error
Hmm, I didn't have zlib-devel so getting that fixed it. Thanks anyway :) - Original Message - From: "Peter Palmreuther" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 19, 2002 4:02 PM Subject: Re: [vchkpw] make error > Hi Thomas, > > On Thu, 19 Dec 2002 15:31:31 +0100 > "Thomas Stian Bergheim" <[EMAIL PROTECTED]> wrote: > > > /usr/bin/ld: cannot find -lz > [...] > > libz resides in /usr/lib/ What's wrong ? > > I don't know. > > Does a 'ldconfig -p' show 'libz.so' too? > If not you maybe might want to update your ld-cache by running > "ldconfig"??? > -- > Peter > >
[vchkpw] vmysql.c / RBLSMTPD
It looks like vmysql.c doesn't allow authenticated users to be excluded from rblsmtpd. This is a problem since we use DUL blacklists and valid users are not able to send out mail. This line (vmysql.c line 761 in version 5.3.16): snprintf(SqlBufRead, SQL_BUF_SIZE, "%s:allow,RELAYCLIENT=\"\"\n",row[0]); should probably look like: snprintf(SqlBufRead, SQL_BUF_SIZE, "%s:allow,RELAYCLIENT=\"\",RBLSMTPD=\"\"\n", row[0]); Correct? I'm not sure if this is the best way to approach, but perhaps someone can offer a suggestion. Is INSERTing the IP into the vpopmail.relay table the best way to handle authenticated users/relaying? Is there a better method - such as requiring SMTP authentication? Any feedback would be appreciated. Thomas Krwawecz III -- Blue Gravity Communications, Inc. 3495 Haddonfield Rd, Suite 6 Pennsauken, NJ 08109 Toll Free: 1-877-8 HOSTING Tel: (856) 662-9100, Fax: (856) 662-9101 Web: http://www.bluegravity.com
[vchkpw] Qmail Control Files
I have a few questions related to vpopmail and Qmail control files due to a few issues that popped up when we changed the hostname of a mail server. The server itself was orbit.bluegravity.com, with mail.bluegravity.com being added via "vadddomain". Everything was working quite well. The control/ files in use were as follows: control/defaultdomain = bluegravity.com control/locals = control/me = mail.bluegravity.com control/plusdomain = My question is this - if we want to change the actual server hostname to mail.bluegravity.com and eliminate "orbit" altogether since it's basically never used, what needs to be changed in the control files? When control/plusdomain had "bluegravity.com" in the contents, we received the following error: failure: Sorry,_no_mailbox_here_by_that_name._vpopmail_(#5.1.1)/ Should this file remain empty? What should I be aware of when turning orbit.bluegravity.com (with a mail.bluegravity.com domain alias) directly into mail.bluegravity.com? Any feedback would be appreciated. Thomas Krwawecz III -- Blue Gravity Communications, Inc. 3495 Haddonfield Rd, Suite 6 Pennsauken, NJ 08109 Toll Free: 1-877-8 HOSTING Tel: (856) 662-9100, Fax: (856) 662-9101 Web: http://www.bluegravity.com
[vchkpw] I'm tiret of bounce mail that is bounced...!
Hello, When someone is sending a mail to a user that dosen't exist on my domain, it send a mail return to tell the sender that the user dosen't exist. That is fine, but when the reply adress in the senders mail isen't a valdi e-mail then the "postmaster" recive a mail from the mailer-deamon at the domain, etc.: Hi. This is the qmail-send program at mydomain.com I tried to deliver a bounce message to this address, but the bounce bounced! <[EMAIL PROTECTED]>: 208.45.133.107 does not like recipient. Remote host said: 550 <[EMAIL PROTECTED]>: User unknown in local recipient table Giving up on 208.45.133.107. I'm tiret of this mails, isen't it possible to disabl this function or something??? Have a nice weekend :) Kind Regards, Thomas
[vchkpw] MySQL entry and files on te local file system?
Hello, I use Vpopmail vith MySQL support. If I delete a entry in the tabel named "vpopmail", then the user can't login, I know. But will it automatic delete the /home/vpopmail/domains/domain.com/user-dir ??? I use it with a script to create e-mails with, on a domain (something like vqregister) - and when a user delete his/her account I will let the script delete the user/dir also (but I wount give apache rights to the folder!) Can anyone help me? -- Best regards, Thomas mailto:[EMAIL PROTECTED]
[vchkpw] HELP (Fwd: Fwd: qmailadmin-devel member lister@lojmann.dk bouncing - removed)
Hi, Does anyone know why a mail to me is bounces? All mailingslist is sending me mail at "[EMAIL PROTECTED]" (a forward to another account on the same domain) I recice all mails, I guess, but when I try to signup to the new qmailadmin-devel list, mail to me is bouncing...? Anyone? /Thomas This is a forwarded message From: Tom Collins <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Thursday, August 14, 2003, 1:55:49 AM Subject: : qmailadmin-devel member [EMAIL PROTECTED] bouncing - removed ===8<==Original message text=== It looks like there's a misconfiguration of your mail server that's preventing qmailadmin-devel messages from getting through. You might want to look into the problem and resubscribe to the list. Begin forwarded message: > From: [EMAIL PROTECTED] > Date: Tue Aug 12, 2003 8:35:25 PM America/Phoenix > To: [EMAIL PROTECTED] > Subject: qmailadmin-devel member [EMAIL PROTECTED] bouncing - removed > > Content-type: text/plain; charset=us-ascii > > This is a Mailman mailing list bounce action notice: > > List: qmailadmin-devel > Member: [EMAIL PROTECTED] > Action: Subscription removed. > Reason: Excessive or fatal bounces. > > > > The triggering bounce notice is attached below. > > Questions? Contact the Mailman site administrator at > [EMAIL PROTECTED] > > This message was created automatically by mail delivery software > (Exim). > > A message that you sent could not be delivered to one or more of its > recipients. This is a permanent error. The following address(es) > failed: > > [EMAIL PROTECTED] > SMTP error from remote mailer after STARTTLS: host lojmann.dk > [217.215.197.205]: > 454 TLS not available: missing RSA private key (#4.3.0): > retry timeout exceeded > > -- This is a copy of the message, including all the headers. -- > -- The body of the message is 17798 characters long; only the first > -- 10240 or so are included here. > > Return-path: <[EMAIL PROTECTED]> > Received: from sc8-sf-list1-b.sourceforge.net ([10.3.1.13] > helo=sc8-sf-list1.sourceforge.net) > by sc8-sf-list2.sourceforge.net with esmtp (Exim 3.31-VA-mm2 #1 > (Debian)) > id 19mmHj-0005es-00 > for <[EMAIL PROTECTED]>; Tue, 12 Aug 2003 20:26:51 -0700 > Date: Tue, 12 Aug 2003 20:26:01 -0700 > From: [EMAIL PROTECTED] > Subject: qmailadmin-devel digest, Vol 1 #28 - 10 msgs > X-Mailer: Mailman v2.0.9-sf.net > MIME-version: 1.0 > Content-type: text/plain > To: [EMAIL PROTECTED] > Sender: [EMAIL PROTECTED] > Errors-To: [EMAIL PROTECTED] > X-BeenThere: [EMAIL PROTECTED] > X-Mailman-Version: 2.0.9-sf.net > Precedence: bulk > Reply-To: [EMAIL PROTECTED] > X-Reply-To: [EMAIL PROTECTED] > List-Help: > <mailto:[EMAIL PROTECTED]> > List-Post: <mailto:[EMAIL PROTECTED]> > List-Subscribe: > <https://lists.sourceforge.net/lists/listinfo/qmailadmin-devel>, > <mailto:qmailadmin-devel- > [EMAIL PROTECTED]> > List-Id: A list for the discussion of ongoing QmailAdmin development. > > List-Unsubscribe: > <https://lists.sourceforge.net/lists/listinfo/qmailadmin-devel>, > <mailto:qmailadmin-devel- > [EMAIL PROTECTED]> > List-Archive: > <http://sourceforge.net/mailarchive/forum.php?forum=qmailadmin-devel> > Message-Id: <[EMAIL PROTECTED]> > > Send qmailadmin-devel mailing list submissions to > [EMAIL PROTECTED] > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/qmailadmin-devel > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of qmailadmin-devel digest..." > > > Today's Topics: > >1. New list, vpopmail-devel (Tom Collins) >2. [vchkpw] New list, vpopmail-devel (Tom Collins) >3. Fwd: maildrop filter config gui? (Oden Eriksson) >4. Re: [qmailadmin] maildrop filter config gui? (Oden Eriksson) >5. qmailadmin alias' question (again) (Brian) >6. Re: qmailadmin alias' question (again) (Jeff Hedlund) >7. Should --enable-modify-quota be on by default? (Tom Collins) >8. RE: Should --enable-modify-quota be on by default? (Benjamin > Tomhave) >9. RE: Should --enable-modify-quota be on by default? (Benjamin > Tomhave) > 10. Re: Should --enable-modify-quota be on by default? (Tom Collins) > > --__--__-- > > Message: 1 > Date: Mon, 11 Aug 2003 21:21
[vchkpw] Chkuser patch and bouncer messages?
Hello vchkpw, When someone send a mail to xxx and this user dosen't exist on my domain. Then my server send a "report" back to the sender. When the senders address dosen't exist, my "postmaster" account recive a bouncer message that tell me that the "bounce bounced"... I'm tiret of getting this messages, can I change the "return-path" in bounce messages send from my server? -- Best regards, Thomas mailto:[EMAIL PROTECTED]
Re[2]: [vchkpw] Chkuser patch and bouncer messages?
Hello, Do you think that I can set the "doublebounceto" to use "MAILER-DAEMON" also? I've got all my this messages to my postmaster account? Will it be possible, and will it only affect bounced bouncer messages? -- Best regards, Thomasmailto:[EMAIL PROTECTED]
