Re: [gentoo-user] Clean up world file
On Mon, 10 Jul 2006 00:35:18 -0500, Anthony E. Caudel wrote: > Thanks Neil. I think I'll use this along with the recommendations of > dep. With 119 packages in the world file, I'll have to be VERY brutal. That depends on what you're using. If you use the KDE split builds without the meta packages, 119 is a very low figure. I have 338 on my desktop and 256 on my laptop, which makes me think I should start pruning the desktop's world file, that is quite a difference. -- Neil Bothwick Windows, the most installed system in the world, I know, I've done it 5 or 6 times myself. signature.asc Description: PGP signature
Re: [gentoo-user] Clean up world file
Neil Bothwick wrote: > ... I have 338 on my desktop and 256 on my laptop, which makes me think I > should start pruning ... > Gulp! Maybe mine isn't so bloated after all. ;-) Tony -- Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. -- Benjamin Franklin -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] vlc wants mozilla - but I don't
Richard Fish wrote: You can also file a bug that the nsplugin dependancy should be satisfied by mozilla-firefox-bin as well. I'm not sure that mozilla-firefox-bin is actually sufficient to configure vlc with --enable-mozilla=firefox, but that should be easy enough to determine. I doubt it. mozilla-firefox-bin does not provide any of the development libraries (e.g. gtkmozembed) or headers. Daniel -- gentoo-user@gentoo.org mailing list
[gentoo-user] DMA for /dev/cdrom ?
Hello everyone, I really like to use DMA for my cdrom/burner but I cant figure out how to make it working! I have a hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache DMA is working fine for my disk but for cdrom I only get: tapa ~ # hdparm -d1 /dev/cdrom /dev/cdrom: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) Does anyone of you know if there is DMA support for this cdrom-drive and if there is what to compile in the kernel? I already gave up to search ... because nothing wanted to work! Regards, Andreas Burghardt -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: DMA for /dev/cdrom ?
Hi Andreas! > I really like to use DMA for my cdrom/burner but I cant figure out how to > make it working! > tapa ~ # hdparm -d1 /dev/cdrom > /dev/cdrom: > setting using_dma to 1 (on) > HDIO_SET_DMA failed: Operation not permitted > using_dma= 0 (off) Two hints, perhaps they help - "hdparm -i $DEVICE" will display what the device can support - I would run hdparm on the physical device file, that is /dev/hdc, not on the cdrom-link. > Does anyone of you know if there is DMA support for this cdrom-drive It sounds like a plain old ATAPI drive, so should work with the generic stuff. No specific knowledge about your drive, though. Anno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Mon, Jul 10, 2006 at 12:38:47PM +0200, Anno v. Heimburg wrote:
> Hi Andreas!
>
> > I really like to use DMA for my cdrom/burner but I cant figure out how to
> > make it working!
>
> > tapa ~ # hdparm -d1 /dev/cdrom
> > /dev/cdrom:
> > setting using_dma to 1 (on)
> > HDIO_SET_DMA failed: Operation not permitted
> > using_dma= 0 (off)
>
> Two hints, perhaps they help
> - "hdparm -i $DEVICE" will display what the device can support
> - I would run hdparm on the physical device file, that is /dev/hdc, not on
> the cdrom-link.
tapa ~ # hdparm -i /dev/hdc
/dev/hdc:
Model=HL-DT-ST DVD-RW GWA-4082N, FwRev=CB03, SerialNo=4CA07617AFA8
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-2
ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
* signifies the current active mode
Hmm, I see AdvancedPM=no ...? Before I changed to Gentoo-Linux I was using
Ubuntu. If I copied files from the cdrom it was _very_ FAASST ... but now ...
Thx for your help!
>
> > Does anyone of you know if there is DMA support for this cdrom-drive
>
> It sounds like a plain old ATAPI drive, so should work with the generic
> stuff. No specific knowledge about your drive, though.
>
> Anno
>
> --
> gentoo-user@gentoo.org mailing list
>
--
"Dan ketika Guru Isa mendengar derap sepatu datang
ke pintu kamar mereka, dia merasa damai dengan rasa
takutnya yang timbul. Dia tahu teror mereka tidak
akan bisa menyentuhnya lagi. Dia telah bebas."
(Mochtar Lubis, "Jalan Tak Ada Ujung", 1952)
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > *udma2 Well, the above shows that you have udma2 activated on your device. -- Regards, Mick pgp7ohAnVj89p.pgp Description: PGP signature
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > *udma2 I'm very sorry, but you all see that I'm quite new to Linux ... If UDMA2 is activated for the drive why is the data trasfer slow and tapa ~ # hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) Why cant I activate DMA? > > Well, the above shows that you have udma2 activated on your device. > -- > Regards, > Mick -- "Dan ketika Guru Isa mendengar derap sepatu datang ke pintu kamar mereka, dia merasa damai dengan rasa takutnya yang timbul. Dia tahu teror mereka tidak akan bisa menyentuhnya lagi. Dia telah bebas." (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Apache Autoindex applications
Ow Mun Heng wrote: > Yes that's true, but, I don't really want to go into implementing an > LDAP server/service right now. > Besides that, I'm looking at using the autoindex script for web-based > file storage. It doesn't support LDAP. (AFAIK) The sql-way seems more complicated to me. I suspect there is something that I may be missing or don't understand. The auotoindex is used only to generate an HTML list of the contents of a given directory. Not to manage that contents. The access to that directory can be restricted using authentication. Then things like mod_auth_mysql can become handy for example to use only one authentication for the "protected area" and for the site's forum (though this won't work with forums like SMF, which use a..hmhm..let me say "strange" way to store passwords). If your idea is to make something like a file sharing site, where depending on the login credentials a user could only download files or again depending on the credentials the user could also upload files the easiest way is to use a cgi script (perl, php, "whatever") for uploading. The script should reside in a directory where only "unloaders" have access and should save the uploaded files in the "downloads" directory. That is the easiest way I can think of...if I have understood you correctly at all. HTH -- Best regards, Daniel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Clean up world file
Anthony E. Caudel wrote: >> > Gulp! Maybe mine isn't so bloated after all. ;-) > > Tony > : ...or perhaps you don't have as many packages installed as Mr. Neil Bothwick has. After cleaning I get: === #wc /var/lib/portage/world 280 281 5415 /var/lib/portage/world === -- Best regards, Daniel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] modular X, nvidia, and unresolved symbols
Heitor wrote: > Hello, > > I dont know if it helps you butn I had the following problem. > > With the stable nvidia driver i got these "unresolved messages" and I > couldn't load the module when I emerge the testing driver. I saw on > the list that there was a > "x11-drivers/nvidia-legacy-drivers" (I have a very old Geforce 256) > and decided to give it a try. > Now my X is up again:) Maybe you should try it too. > I tried both the legacy drivers and the non-legacy drivers. Same messages about unresolved symbols. John -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
hétfő 10 július 2006 13.40 dátummal Andreas Burghardt ezt írta: > On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > > *udma2 > > I'm very sorry, but you all see that I'm quite new to Linux ... > If UDMA2 is activated for the drive why is the data trasfer slow and > > tapa ~ # hdparm -d1 /dev/hdc > > /dev/hdc: > setting using_dma to 1 (on) > HDIO_SET_DMA failed: Operation not permitted > using_dma= 0 (off) > > Why cant I activate DMA? What kind of chipset does your motherboard use? You can check it with the lspci command. Maybe you have to load a kernel module for that chipset... Istvan -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Mon, Jul 10, 2006 at 02:10:10PM +0200, Stef?n Istv?n wrote: > h?tf? 10 j?lius 2006 13.40 d?tummal Andreas Burghardt ezt ?rta: > > On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > > > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > > > *udma2 > > > > I'm very sorry, but you all see that I'm quite new to Linux ... > > If UDMA2 is activated for the drive why is the data trasfer slow and > > > > tapa ~ # hdparm -d1 /dev/hdc > > > > /dev/hdc: > > setting using_dma to 1 (on) > > HDIO_SET_DMA failed: Operation not permitted > > using_dma= 0 (off) > > > > Why cant I activate DMA? > > What kind of chipset does your motherboard use? > You can check it with the lspci command. Maybe you have to load a kernel > module for that chipset... 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] 06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 06:06.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller 06:06.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:06.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) > > Istvan > > -- > gentoo-user@gentoo.org mailing list > -- "Dan ketika Guru Isa mendengar derap sepatu datang ke pintu kamar mereka, dia merasa damai dengan rasa takutnya yang timbul. Dia tahu teror mereka tidak akan bisa menyentuhnya lagi. Dia telah bebas." (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Monday, 10 July 2006 22:12, Andreas Burghardt wrote: > On Mon, Jul 10, 2006 at 02:10:10PM +0200, Stef?n Istv?n wrote: > > h?tf? 10 j?lius 2006 13.40 d?tummal Andreas Burghardt ezt ?rta: > > > On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > > > > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > > > > *udma2 > > > > > > I'm very sorry, but you all see that I'm quite new to Linux ... > > > If UDMA2 is activated for the drive why is the data trasfer slow and > > > > > > tapa ~ # hdparm -d1 /dev/hdc > > > > > > /dev/hdc: > > > setting using_dma to 1 (on) > > > HDIO_SET_DMA failed: Operation not permitted > > > using_dma= 0 (off) > > > > > > Why cant I activate DMA? > > > > What kind of chipset does your motherboard use? > > You can check it with the lspci command. Maybe you have to load a kernel > > module for that chipset... > > 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express > Processor to DRAM Controller (rev 03) > 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express > Root Port (rev 03) > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #1 (rev 04) > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #2 (rev 04) > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB2 EHCI Controller (rev 04) > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) > 00:1e.2 Multimedia audio controller: Intel Corporation > 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) > 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 > Modem Controller (rev 04) > 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge > (rev 04) > 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller > (rev 04) > 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon > Mobility M300] > 06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network > Connection (rev 05) > 06:06.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller > 06:06.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader > Controller > 06:06.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader > Controller > 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 06:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 > Controller (PHY/Link) Looks like the same chipset as my laptop. In order to get DMA working I had to set CONFIG_IDE=n and enable SCSI cdrom support and CONFIG_SCSI_ATA_PIIX. Your cdrom device will become /dev/sr0 and you shouldn't have any issues with DMA. > > > Istvan > > > > -- > > gentoo-user@gentoo.org mailing list > > -- > > "Dan ketika Guru Isa mendengar derap sepatu datang > ke pintu kamar mereka, dia merasa damai dengan rasa > takutnya yang timbul. Dia tahu teror mereka tidak > akan bisa menyentuhnya lagi. Dia telah bebas." > (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) -- Raymond Lewis Rebbeck -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Monday 10 July 2006 13:42, Andreas Burghardt wrote: > > What kind of chipset does your motherboard use? > > You can check it with the lspci command. Maybe you have to load a kernel > > module for that chipset... I suggest that instead of compiling the chipset kernel driver as a module, you build it in the kernel. This has worked for this problem that others had in the past and may hopefully fix yours. HTH. -- Regards, Mick pgpQyYEZxLPzM.pgp Description: PGP signature
Re: [gentoo-user] amd64-hardened breaks upon glibc emerge
> > library, but after the upgrade of glibc it shows up in /usr/lib. The > > only solution I could make up was to move everything from /usr/lib > > to /usr/lib64, symlink /usr/lib -> /usr/lib64 and then start emerging > > Actually seems like bug #133547, in which case it seems like you did > the right thing to fix. This bug seems to be fixed in > baselayout-1.12.0 (see /usr/portage/sys-apps/baselayout/ChangeLog), > but unfortunately both 1.12.0-r1 and 1.12.1 are still ~amd64. So what > you may need to do before updating gcc or glibc is: > > echo "<=sys-apps/baselayout-1.12.99 ~amd64" >>/etc/portage/package.keywords > emerge -u baselayout I followed this recipe - (a fresh --sync'd system) -> 'emerge portage' -> 'emerge baselayout' (1.12.1) -> 'emerge gcc glibc' - and I'm stuck again, with the same problem. At any rate, thank you for your reply. -Roman -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: java 1.4 & eclipse
Richard Fish asmallpond.org> writes: > According to the instructions.html in the source zip > "eclipse-sourceBuild-srcIncluded-3.2.zip", you must have *both* a 1.4 > and 1.5 jdk installed to build eclipse. So apparently it is not > possible to build or use eclipse 3.2 with only a 1.5 jdk. Ah, that brings up a follow up question. If many of the ebuild packages have built in documentation, then is there a tool/package/web_interface that allow the document perusal without individual(admin) interaction? For example, man pages are auto loaded and ready with 'man ' so I'd be interested in any similiar doc system for xml, html, doc* It seems like quite often I have to go on a search expedition for docs Is there a gentoo standard or a wiki related to this subject? curious, James -- gentoo-user@gentoo.org mailing list
[gentoo-user] What does "perl" USE flag do?
Hi! After a sync today, I ran "emerge -Duvat world" and see for example: [nomerge ] dev-perl/DBD-mysql-3.0004 USE="-minimal perl%" [nomerge ] dev-perl/DBI-1.51 USE="-minimal perl%" [nomerge ] dev-perl/PlRPC-0.2018 USE="-minimal perl%" [nomerge ]dev-perl/Net-Daemon-0.39 USE="-minimal perl%" The "perl" USE flag is new. What does it do? [16:34:41 [EMAIL PROTECTED]:~] $ euse -i perl global use flags (searching: perl) [+ D ] perl - Adds support/bindings for the Perl language. local use flags (searching: perl) no matching entries found Hm. I don't understand. Add support/binding for the Perl language in Perl modules? What would be built, if the perl Module Net-Daemon-0.39 had no perl support or binding? Alexander Skwar -- IF I HAD A MINE SHAFT, I don't think I would just abandon it. There's got to be a better way. -- Jack Handley, The New Mexican, 1988. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] What does "perl" USE flag do?
Hi, On Mon, 10 Jul 2006 16:38:39 +0200 Alexander Skwar <[EMAIL PROTECTED]> wrote: > The "perl" USE flag is new. What does it do? I just replied on the german ML to this question, but since it was re-asked here: The perl USE flag pulls in dev-lang/perl as a dependency. It is now a default USE flag on most profiles. I guess it's due to other flavours than Gentoo/Linux may have already a working perl in their base system (e.g. the BSDs, Darwin, whatever) and are assumed that there shouldn't be another one pulled in. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Sharing access to my laptop
> My girlfriend's laptop's internal wireless card doesn't seem to > compatible with WPA and I don't want to use WEP on my Gentoo router. > This leaves me with the options of either getting her to buy a new > wireless card or sharing my laptop. She has a user account on my > laptop and I use gdm so it's easy for her to log in, but is there > anything that can be done about the situation where I'm logged in and > away, xscreensaver has locked the screen, and she wants to log into > her account and use the system? er... click "New Login" as it's presented at the xscreensaver prompt? So you see that button on the locked screen after compiling with new-login without any further configuration? I've compiled 4.24 and 5.00 with new-login and I don't see anything like that on the locked screen. - Grant -- gentoo-user@gentoo.org mailing list
[gentoo-user] managing yahoo group issue
Hi group, This is weird. When I tried to edit my yahoo group account at groups.yahoo.com no groups were listed under my account name. And when I did a search for "gentoo-user" in the search field it didn't show up in the results. Ditto for "ubuntu-users", another group I subscribe to. Most of the mail from these groups reaches my box(often the OP is missing) FWIW. Anybody else have this problem and been able to deal with it? -Maxim __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: DMA for /dev/cdrom ?
On Mon, Jul 10, 2006 at 10:26:04PM +0930, Raymond Lewis Rebbeck wrote: > On Monday, 10 July 2006 22:12, Andreas Burghardt wrote: > > On Mon, Jul 10, 2006 at 02:10:10PM +0200, Stef?n Istv?n wrote: > > > h?tf? 10 j?lius 2006 13.40 d?tummal Andreas Burghardt ezt ?rta: > > > > On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote: > > > > > On Monday 10 July 2006 12:10, Andreas Burghardt wrote: > > > > > > *udma2 > > > > > > > > I'm very sorry, but you all see that I'm quite new to Linux ... > > > > If UDMA2 is activated for the drive why is the data trasfer slow and > > > > > > > > tapa ~ # hdparm -d1 /dev/hdc > > > > > > > > /dev/hdc: > > > > setting using_dma to 1 (on) > > > > HDIO_SET_DMA failed: Operation not permitted > > > > using_dma= 0 (off) > > > > > > > > Why cant I activate DMA? > > > > > > What kind of chipset does your motherboard use? > > > You can check it with the lspci command. Maybe you have to load a kernel > > > module for that chipset... > > > > 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express > > Processor to DRAM Controller (rev 03) > > 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express > > Root Port (rev 03) > > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #1 (rev 04) > > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #2 (rev 04) > > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB2 EHCI Controller (rev 04) > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) > > 00:1e.2 Multimedia audio controller: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) > > 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 > > Modem Controller (rev 04) > > 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge > > (rev 04) > > 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller > > (rev 04) > > 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon > > Mobility M300] > > 06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network > > Connection (rev 05) > > 06:06.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller > > 06:06.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader > > Controller > > 06:06.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader > > Controller > > 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 06:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 > > Controller (PHY/Link) > > Looks like the same chipset as my laptop. In order to get DMA working I had > to > set CONFIG_IDE=n and enable SCSI cdrom support and CONFIG_SCSI_ATA_PIIX. > > Your cdrom device will become /dev/sr0 and you shouldn't have any issues with > DMA. > Thank you very much, its working! And thx to all who helped me! > > > > > Istvan > > > > > > -- > > > gentoo-user@gentoo.org mailing list > > > > -- > > > > "Dan ketika Guru Isa mendengar derap sepatu datang > > ke pintu kamar mereka, dia merasa damai dengan rasa > > takutnya yang timbul. Dia tahu teror mereka tidak > > akan bisa menyentuhnya lagi. Dia telah bebas." > > (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) > > -- > Raymond Lewis Rebbeck > -- > gentoo-user@gentoo.org mailing list > -- "Dan ketika Guru Isa mendengar derap sepatu datang ke pintu kamar mereka, dia merasa damai dengan rasa takutnya yang timbul. Dia tahu teror mereka tidak akan bisa menyentuhnya lagi. Dia telah bebas." (Mochtar Lubis, "Jalan Tak Ada Ujung", 1952) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] managing yahoo group issue
On Mon, Jul 10, 2006 at 08:56:52AM -0700, Penguin Lover maxim wexler squawked: > This is weird. When I tried to edit my yahoo group > account at groups.yahoo.com no groups were listed > under my account name. And when I did a search for > "gentoo-user" in the search field it didn't show up in > the results. > > Ditto for "ubuntu-users", another group I subscribe > to. > could it be because that gentoo-user and ubuntu-users are not affiliated with yahoo groups? W -- The true significance of Sacajawea's involvement in the Lewis and Clark expedition: It was the first documented trip in history where men asked a woman for directions and followed them, allowing them to arrive at their destination. Sortir en Pantoufles: up 30 days, 17:22 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Clean up world file
Daniel Iliev wrote: > Anthony E. Caudel wrote: >> Gulp! Maybe mine isn't so bloated after all. ;-) >> >> Tony >> > : > ...or perhaps you don't have as many packages installed as Mr. Neil > Bothwick has. > > After cleaning I get: > === > #wc /var/lib/portage/world > 280 281 5415 /var/lib/portage/world > === > Hi, Result after "emerge --depclean -av" ...SKIP... Packages installed: 1101 Packages in world:247 Packages in system: 59 Unique package names: 1101 Required packages:1135 Number removed: 0 ...END... #wc /var/lib/portage/world 246 247 4895 /var/lib/portage/world PS: recently cleaned world file. HTH.Rumen smime.p7s Description: S/MIME Cryptographic Signature
[gentoo-user] nv vs nvidia (xorg-7*)
Sorry for revisiting a confusing subject, but after ready many of the recent postings on nvidia and xorg-7* I have a few questions. Yes I have read: http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml and it looks fine and reasonable, in fact the I'm at the revdep-rebuild on my first of 7 convertions to modular X.(7.*). My first card: 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) Legacy or current? It's not clear to me which category this or any other nvidia cards fall into. Is there a table I can look up to see which nvidia cards belong to which driver. In xorg.conf do I use do 'nv' or 'nvidia' or 'nvidia-legacy' Driver "nv" Driver "nvidia" Driver "nvidia-legacy" With my hardware, which current nvidia driver (legacy) would I emerge to match my card? On another gentoo workstation It has this card: 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) Which Driver would I choose for this nvidia card? James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
060709 Richard Fish wrote: > On 7/9/06, Philip Webb <[EMAIL PROTECTED]> wrote: >> (1) Konqueror 3.5.3 (3.5.1 3.5.2) displays news sites with an ugly font >> despite 'Standard font = New Century Schoolbook, min/med size 11'; >> there is no problem with Firefox: see >> http://www.chass.utoronto.ca/~purslow/font-konq.png >> http://www.chass.utoronto.ca/~purslow/font-firefox1.png > Konqueror is honoring document-specified fonts instead of your choice. > Yahoo specifies Verdana for everything, so that is what Konqueror displays. > You can override this brutally via the "Accessibility" style sheet, > customizing it to force the "same font family for all text". Yes, that works, but only if you restart Konqueror: that trapped me previously, as I didn't think it needed restarting. However, a different problem arises, as vital header text is now missing: http://www.chass.utoronto.ca/~purslow/font-firefox2.png http://www.chass.utoronto.ca/~purslow/font-konq2.png This happens on other sites too. I don't know how to write style sheets, though I can find these in ~/.kde : can you suggest what to add or do you know of a beginners' guide to style sheets anywhere ? >> (2) Open Office 2.0.3 (2.0.2) insists on overlarge fonts for menus, >> despite my setting 'Tools -> Options -> OpenOffice -> Fonts: >> automatic, non-proportional, size 10'; it is cured only when I set >> 'Tools -> Options -> OpenOffice -> View: scaling = 80 % ' >> & '125 %' in the toolbar: see ( 1 = former , 2 = latter ) >> http://www.chass.utoronto.ca/~purslow/font-oo1.png >> http://www.chass.utoronto.ca/~purslow/font-oo2.png > Make sure you have "Use system font for user interface" selected > in "Tools->Options->OpenOffice.org->View" It makes no difference when I select that: any further suggestions ? Perhaps I need to change the "system font" somewhere ? IIRC this started only with OO 2.0.2 : does that give any clues ? Thanks for your helpful assistance. Anyone else have thoughts ? -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Philip Webb wrote: > do you know of a beginners' guide to style sheets anywhere ? W3Schools has good tutorials for this: http://www.w3schools.com/css/default.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEspYOohEPKF4FYk8RAhR+AJsHsvVocMaemGAF8TGWUD3mWJfqKwCfasmn MYwPSQHRSpMCUpOm/1csxII= =R/6f -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
[gentoo-user] Keyboard Layout
hi, there, I've beem having problems setting my kbd layout. I added a line in xorg.conf telling it to use "us_intl" as my kbd layout, but it seems to be ignoring it. as a consequence, I have to execute "setxkbmap us_intl" every time I enter Gnome. I also tried adding it to ~/.xinitrc . how can I automate this task? thanks in advance. cláudio. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nv vs nvidia (xorg-7*)
James wrote: > (...) > My first card: > 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX > 400] > (rev b2) > > Legacy or current? It's not clear to me which category this or any other > nvidia cards fall into. Is there a table I can look up to see which > nvidia cards belong to which driver. For your card you can use the current drivers.. You can have a look at this : http://www.nvidia.com/object/IO_18897.html It contains all the models supported by the latest nvidia drivers. > In xorg.conf do I use do 'nv' or 'nvidia' or 'nvidia-legacy' > Driver "nv" > Driver "nvidia" > Driver "nvidia-legacy" > > With my hardware, which current nvidia driver (legacy) would I emerge > to match my card? You can use nvidia driver in your xorg.conf. Driver "nvidia" > On another gentoo workstation It has this card: > > 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] > (rev a1) > > Which Driver would I choose for this nvidia card? This card too will work with the latest nvidia-drivers. One more thing James, there is no need to do an emerge nvidia-kernel and emerge nvidia-glx anymore.. There is a new unified ebuild x11-drivers/nvidia-drivers. Just do a emerge x11-drivers/nvidia-drivers. I suggest you do $ echo "x11-drivers/nvidia-drivers ~x86" > /etc/portage/package.keywords as the newest drivers have not yet made into the stable branch.. Hope this helps, Farhan Ahmed -- Place : Bangalore, Karnataka, India GPG Key : 8BE90E98 WengoPhone ID : farhanahmed IRC Nick: farhanahmed / farhanahmed06 (irc.freenode.net) pgp3FywcisRL6.pgp Description: PGP signature
Re: [gentoo-user] nv vs nvidia (xorg-7*)
James,NV is an open source driver supporting all NVidia cards, but does not support hardware acceleration. There are numerous and very annoying bugs reported with this driver. NVIDIA is a proprietary driver which supports 2D and 3D hardware acceleration through the GF2 series of cards. This is your best option. NVIDIA-LEGACY is a driver I was not even aware of, but I'm guessing this would support GF1, 256, and TNT cards that have been bumped out of the main driver for space. Both of your cards should use the NVIDIA driver. You can use this flag in your make.conf settings for xorg 7, however it will really not have much affect. You'll need to emerge these seperately as far as I know. # emerge nvidia-glx nvidia-kernelthen go on and emerge your xorg 7. Be sure to read about driver compatibility problems with XOrg 7.1 and up on the gentoo-wiki site if you plan to use that version of xorg.JBDubbsOn 7/10/06, James < [EMAIL PROTECTED]> wrote:Sorry for revisiting a confusing subject, but after ready many of the recent postings on nvidia and xorg-7* I have a few questions.Yes I have read:http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml and it looks fine and reasonable, in fact the I'm at the revdep-rebuild on my first of 7 convertions to modular X.(7.*).My first card:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)Legacy or current? It's not clear to me which category this or any othernvidia cards fall into. Is there a table I can look up to see whichnvidia cards belong to which driver.In xorg.conf do I use do 'nv' or 'nvidia' or 'nvidia-legacy' Driver "nv" Driver "nvidia" Driver "nvidia-legacy"With my hardware, which current nvidia driver (legacy) would I emerge to match my card?On another gentoo workstation It has this card:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200](rev a1)Which Driver would I choose for this nvidia card? James--gentoo-user@gentoo.org mailing list-- Jason Weisberger [EMAIL PROTECTED]
[gentoo-user] SOMEWHAT OFF TOPIC -- Palm Tungsten E, and Google Calendar
Hi Folks: I am looking to be able to sync my palm tungsten E to my google calendar, and I am wondering if it would be possible to use evolution or other linux program to accomplish this -- I know it's a bit off topic for the list, so feel free to contact me off list if you want. Could sure use some help on this TIM Timothy A. Holmes IT Manager / Network Admin / Web Master / Computer Teacher Medina Christian Academy A Higher Standard... Jeremiah 33:3 Jeremiah 29:11 Esther 4:14 -- gentoo-user@gentoo.org mailing list
[gentoo-user] xsane not recognizing hp 7130
xsane is no longer recognizing my officejet 7130. I have emerged sane-backends and hplip. This used to work (well) and I didn't deliberately disable anything. Thanks in advance for any help; some system information is below. allan ajglap gottlieb # eix sane * games-arcade/insaneodyssey Available versions: 000311 Installed: none Homepage: http://members.fortunecity.com/rivalentertainment/iox.html Description: Help West Muldune escape from a futuristic mental hospital * media-gfx/sane-backends Available versions: 1.0.13-r3 1.0.15 ~1.0.15-r3 ~1.0.16-r4 ~1.0.17 Installed: 1.0.15 Homepage:http://www.sane-project.org/ Description: Scanner Access Now Easy - Backends * media-gfx/sane-frontends Available versions: 1.0.13 ~1.0.14 Installed: none Homepage:http://www.sane-project.org Description: Scanner Access Now Easy * media-gfx/xsane Available versions: 0.991 Installed: 0.991 Homepage:http://www.xsane.org/ Description: graphical scanning frontend Found 4 matches ajglap gottlieb # ajglap gottlieb # eix hplip * net-print/hplip Available versions: 0.9.7-r3 ~1.6.6 ~1.6.6-r1 Installed: 0.9.7-r3 Homepage:http://hplip.sourceforge.net/ Description: HP Linux Imaging and Printing System. Includes net-print/hpijs, scanner drivers and service tools. Found 1 matches ajglap gottlieb # ajglap gottlieb # uname --all Linux ajglap 2.6.14-gentoo-r4 #2 SMP PREEMPT Sat Feb 4 21:49:59 EST 2006 i686 Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz GNU/Linux ajglap gottlieb # ajglap gottlieb # lsusb Bus 004 Device 001: ID : Bus 003 Device 004: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver Bus 003 Device 003: ID 05f3:0007 PI Engineering, Inc. Kinesis Advantage PRO MPC/USB Keyboard Bus 003 Device 002: ID 05f3:0081 PI Engineering, Inc. Kinesis Integrated Hub Bus 003 Device 001: ID : Bus 002 Device 003: ID 03f0:2611 Hewlett-Packard Bus 002 Device 001: ID : Bus 001 Device 001: ID : ajglap gottlieb # ajglap gottlieb # lsusb -v -s 2:3 Bus 002 Device 003: ID 03f0:2611 Hewlett-Packard Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x03f0 Hewlett-Packard idProduct 0x2611 bcdDevice1.00 iManufacturer 1 Hewlett-Packard iProduct2 officejet 7100 series iSerial 3 SG2CGB20QK6H bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 78 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 3 IEEE 1284.4 compatible bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorTyp
Re: [gentoo-user] SOMEWHAT OFF TOPIC -- Palm Tungsten E, and Google Calendar
On 7/10/06, Timothy A. Holmes <[EMAIL PROTECTED]> wrote: I am looking to be able to sync my palm tungsten E to my google calendar, and I am wondering if it would be possible to use evolution or other linux program to accomplish this -- I know it's a bit off topic for the list, so feel free to contact me off list if you want. Could sure use some help on this TIM Have not tried it but suggest you look at: http://gentoo-wiki.com/HOWTO_USB_sync_for_Palm_PDAs_with_Evolution_2.0_and_udev may also google for 'palm evolution' ;-) -Mike -- Michael E. Crute http://mike.crute.org I may not have gone where I intended to go, but I think I have ended up where I intended to be. --Douglas Adams -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
060710 Randall Barlow wrote: > Philip Webb wrote: >> do you know of a beginners' guide to style sheets anywhere ? > W3Schools has good tutorials for this: > http://www.w3schools.com/css/default.asp Thanks: I've bookmarked it & will investigate later. Any advice from anyone re the immediate problem is still welcome (smile). -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
On 7/10/06, Philip Webb <[EMAIL PROTECTED]> wrote: It makes no difference when I select that: any further suggestions ? Perhaps I need to change the "system font" somewhere ? The 'system' font in this case should match the Menu font selected in the KDE Control Center. IIRC this started only with OO 2.0.2 : does that give any clues ? Did you build OOo from source, or install the -bin? Mine is from source... -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xsane not recognizing hp 7130
On Mon, 10 Jul 2006 14:09:24 -0400, Allan Gottlieb wrote: > xsane is no longer recognizing my officejet 7130. ~What does "scanimage -L" show, run as root and as a normal user? -- Neil Bothwick Top Oxymorons Number 5: Twelve-ounce pound cake signature.asc Description: PGP signature
Re: [gentoo-user] lost deadkeys layout
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > Okay. Just in case, what say 'grep "^(EE)" /var/log/Xorg.0.log' > and 'grep "^(WW)" /var/log/Xorg.0.log'. And better not snip things > that may seem irrelevant. # grep "^(EE)" /var/log/Xorg.0.log (EE) Couldn't load XKB keymap, falling back to pre-XKB keymap The other one said only about apm... > And the output of 'locate *xk*de'. (If you don't have locate, > 'emerge slocate' and 'updatedb', then the command again.) locate *xk*de /usr/share/X11/xkb/keymap/sgi_vndr/de /usr/share/X11/xkb/keymap/sun_vndr/de /usr/share/X11/xkb/symbols/macintosh_vndr/de /usr/share/X11/xkb/symbols/sun_vndr/de /usr/share/X11/xkb/symbols/de > > I didn't reinstall it, only the normal emerge -uD world comand > > You're saying that for the upgrade from xorg-6.8.2 to 7.0 you didn't > remove the /usr/lib/X11/xkb dir? You didn't follow > http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml ? Yes, but I didn't understand how to set the new one. It seems (from the name) as the old driver! > You probably found http://forums.gentoo.org/viewtopic-t-426483.html > and http://bugs.gentoo.org/show_bug.cgi?id=113108 by now. > > So try: > > # ln -snf ../../share/X11/xkb /usr/lib/X11/xkb ? > > I waited until the stable version of xorg: > > You mean you waited until modular xorg-7.0 went stable? Yes, after a first trial I prefered to have a working computer than fight with the keyboard too(I have a lot of hardware that doesn't work!) > > I tried it some time ago > > You mean you tried modular xorg-7.0 when the ebuilds were still > marked as unstable? Yes, when it was masked (first time) and when it was in testing > > and I had the same problem, and after it I had problem with > > downgrade: > > You mean that the problem remained after you downgraded to > xorg-6.8.2? No, it means that I didn't downgrade to xorg-6.8.2! Now I did it and today I just retry to install xorg-7.0 > > I installed the system another time... > > Do you mean that you reinstalled xorg-6.8.2 again? Or that you > reinstalled the whole of Gentoo? Please be more precise in your > descriptions. No, I reinstalled the entire gentoo, but I had other problem too: a emerge -e world was enough to solve most of them! > > > then start re-emerging those (not by version > > > number, but by name), one by one, and keep restarting X to see > > > when it gets fixed. > > > > I'll try it > > Anything new on this? > > Benno When I restarted X, X crashed! I had to downgrade to xorg-6.8.2! Now I try to set from the session on internet about if kdm doesn't work Luigi - -- Public key GPG(0x633F86B7) on hkp://keyserver.linux.it/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.4 (GNU/Linux) iD8DBQFEsq5fHmkkjmM/hrcRAjmVAKCH6jKvPXueWEBtzXLpIyTtAhnKHgCgnwNs 6uxtOnz/ikvuClIve2p1SSM= =QSUZ -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xsane not recognizing hp 7130
At Mon, 10 Jul 2006 20:31:08 +0100 Neil Bothwick <[EMAIL PROTECTED]> wrote: > On Mon, 10 Jul 2006 14:09:24 -0400, Allan Gottlieb wrote: > >> xsane is no longer recognizing my officejet 7130. > > ~What does "scanimage -L" show, run as root and as a normal user? [EMAIL PROTECTED] ~ $ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [EMAIL PROTECTED] ~ $ ss ajglap ~ # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). ajglap ~ # thanks, allan -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Keyboard Layout
Cláudio Henrique wrote: > I've beem having problems setting my kbd layout. I added a line > in xorg.conf telling it to use "us_intl" as my kbd layout, but it > seems to be ignoring it. > as a consequence, I have to execute "setxkbmap us_intl" every > time I enter Gnome. I also tried adding it to ~/.xinitrc . Maybe Gnome is overriding the keyboard setting, doing a setxkbmap of its own? Putting it .xinitrc then comes too early. Try putting it in .bashrc and make a Terminal open on every startup? On make Gnome stop setting the keyboard. Benno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xsane not recognizing hp 7130
On 7/10/06, Allan Gottlieb <[EMAIL PROTECTED]> wrote: xsane is no longer recognizing my officejet 7130. Hmm, is an etc-update pending? Bus 002 Device 003: ID 03f0:2611 Hewlett-Packard Did you merge hplip with USE=scanner? (emerge -pv hplip) Does /etc/sane.d/dll.conf contain the line "hpaio"? -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
060710 Richard Fish wrote: > On 7/10/06, Philip Webb <[EMAIL PROTECTED]> wrote: >> It makes no difference when I select that: any further suggestions ? >> Perhaps I need to change the "system font" somewhere ? > The 'system' font in this case should match the Menu font > selected in the KDE Control Center. It doesn't : there I have 'Fixed GNU 13', which gives the menu line in http://www.chass.utoronto.ca/~purslow/font-konq.png which is definitely smaller than the one displayed in http://www.chass.utoronto.ca/~purslow/font-oo1.png >> IIRC this started only with OO 2.0.2 : does that give any clues ? > Did you build OOo from source, or install the -bin? Mine is from source... I always build OO from source ( c 6 hr : grin): these are the flags app-office/openoffice-2.0.3 USE="-binfilter -cairo -debug -eds -firefox -gnome gtk java kde -ldap -mono -odk -pam xml" LINGUAS="-af -ar -be_BY -bg -bn -bs -ca -cs -cy -da -de -el -en -en_GB -en_US -en_ZA -es -et -fa -fi -fr -gu_IN -he -hi_IN -hr -hu -it -ja -km -ko -lt -mk -nb -nl -nn -nr -ns -pa_IN -pl -pt -pt_BR -ru -rw -sh_YU -sk -sl -sr_CS -st -sv -sw_TZ -th -tn -tr -ts -vi -xh -zh_CN -zh_TW -zu" It may be a bug which arises only with some particular set of options. Which font settings do you have which wb relevant to this problem ? -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] lost deadkeys layout
Luigi Pinna wrote: > /usr/share/X11/xkb/symbols/de So you had a "de" map, and in the right place. So that wasn't the problem. > > # ln -snf ../../share/X11/xkb /usr/lib/X11/xkb > > ? It's a command, to be executed as root (that's what the "#" means), it links the old place of keyboard maps to the new one. But it seems you have bigger problems now than just an unwilling keyboard. > When I restarted X, X crashed! Crashed? Like how? Benno -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
060710 Richard Fish wrote: > The 'system' font in this case should match the Menu font > selected in the KDE Control Center. The problem seems to be that OO doesn't know re 'Fixed GNU' & makes a clumsy substitution: when I set the KDE menu font to Helvetica, the OO menu font returns to what it used to be (with normal sizing). 'Use system font' in OO Options-View makes no difference either way, so OO+KDE seems to use the KDE fonts automatically. I can investigate myself, but do you have any quick advice how to get OO to recognise 'Fixed GNU' ? I prefer Fixed GNU to Helvetica & it's a pity to have to use the latter simply to avoid an awkward problem when using OO . -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
[gentoo-user] plugger.so access rights
Hi All, Following an emerge of Opera 9.0 the access rights of plugger.so changed (or was corrupted)for some reason and it is no longer accessible: === # ls -la /opt/opera/lib/opera/plugins/ total 256 drwxr-xr-x 2 root root192 Jul 7 10:45 . drwxr-xr-x 4 root root104 Jul 7 10:45 .. -rwxr-xr-x 1 root root 94912 Jul 7 10:45 libnpp.so -rwxr-xr-x 1 root root 8376 Jul 7 10:45 operaplugincleaner -rwxr-xr-x 1 root root 121096 Jul 7 10:45 operapluginwrapper -rw--- 1 root root 25656 Jan 8 2005 plugger.so === The same file in its original location looks like this: === # ls -la /opt/netscape/plugins/ -rw-r--r-- 1 root root 25628 Jul 10 22:05 plugger.so === The thing is all other plugins in the netscape folder with the exception of flashplayer.xpt are executables. What are the default plugger.so access rights? -- Regards, Mick pgpMhw1qAToei.pgp Description: PGP signature
Re: [gentoo-user] xsane not recognizing hp 7130
At Mon, 10 Jul 2006 13:41:14 -0700 Richard Fish <[EMAIL PROTECTED]> wrote: > On 7/10/06, Allan Gottlieb <[EMAIL PROTECTED]> wrote: >> xsane is no longer recognizing my officejet 7130. > > Hmm, is an etc-update pending? No. >> Bus 002 Device 003: ID 03f0:2611 Hewlett-Packard > > Did you merge hplip with USE=scanner? (emerge -pv hplip) Bingo! Works fine now. I am hoping this is a new use flag. I *really* don't believe I removed any use flags from make.conf. > Does /etc/sane.d/dll.conf contain the line "hpaio"? Yes. Thank you VERY much. allan -- gentoo-user@gentoo.org mailing list
[gentoo-user] Windows show through the OpenGL screensaver when Transluency is activated
Hi list Whenever I have transluency and shadows activated in the KDE control center and an OpenGL screensaver is running, I can see the windows whose content is changing (such as the watch in the systray or an xterm in which I'm emerge'ing something) although the screensaver running. Those windows are shown when their content changes, but only for a short time and what is shown remains always the same. Does anybody have an idea what I could do against this? Gian -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Konqueror & Open Office : font problems
060710 Philip Webb wrote: > 060709 Richard Fish wrote: >> On 7/9/06, Philip Webb <[EMAIL PROTECTED]> wrote: >>> Konqueror 3.5.3 (3.5.1 3.5.2) displays news sites with an ugly font >>> despite 'Standard font = New Century Schoolbook, min/med size 11'; >> Konqueror is honoring document-specified fonts instead of your choice. >> Yahoo specifies Verdana for everything, so that is what Konqueror displays. >> You can override this brutally via the "Accessibility" style sheet, >> customizing it to force the "same font family for all text". > Yes, that works, but only if you restart Konqueror: > that trapped me previously, as I didn't think it needed restarting. > However, a different problem arises, as vital header text is now missing: > http://www.chass.utoronto.ca/~purslow/font-firefox2.png > http://www.chass.utoronto.ca/~purslow/font-konq2.png > This happens on other sites too. I don't know how to write style sheets, > though I can find these in ~/.kde : can you suggest what to add > or do you know of a beginners' guide to style sheets anywhere ? This proved easy to fix by taking the font lines from "accessible" & inserting them into "default" to create a personal CSS file. The originals are in hard-to-find places: "default" = /usr/kde/3.5/share/apps/khtml/css/html4.css "accessible" = ~/.kde/share/apps/kcmcss/override.css (Krusader's very powerful search facility helped a lot in finding them) & KDE's use of style sheets is not well explained in the KDE dox. Thanks again to the 2 helpers & HTH as grist for the list archive. -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: iptables wiki
Neil Bothwick wrote: > On Wed, 05 Jul 2006 20:59:09 -0500, Dale wrote: > > >>> Have you tried kmyfirewall ? >>> > > >> I didn't know it existed actually. It would be so nice if there was >> somewhere we could go to find out about all this stuff. There is no >> telling how many programs are out there that we have no clue exists. >> > > http://packages.gentoo.org/packages/?category=net-firewall > > or > > eix -C firewall > > >> It may be a while. I'm getting married tomorrow >> and I'll be gone for a while, honeymoon ya know. ;-) >> > > Congratulations! > > > OK. I'm back. I have a new peice of jewelry now. ;-) I never could figure out that eix command. Man page may as well be Greek. I'm starting to get a !little! used to equery though. Guess they'll pull it next. O_O Dale :-) :-) -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: video problem
recompiled, installed new driver, opened many images, tabs, etc in firefox, x running fine so far; however, this problem can manifest at the strangest of times, so if it recurs, i'll post it here -- Registered Linux User #392061 counter.li.org "its not fair to have a battle of wits with unarmed opponents" -Anonymous No, you may not goto the washroom. Last time you went to the washroom, we found you days later in an air vent. -Bryn -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: nv vs nvidia (xorg-7*)
Farhan Ahmed gmail.com> writes: > http://www.nvidia.com/object/IO_18897.html > It contains all the models supported by the latest nvidia drivers. Yes this did the4 trick. Thanks, James > $ echo "x11-drivers/nvidia-drivers ~x86" > /etc/portage/package.keywords Yep, this did the trick thanks! James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Things that can be improved
Richard Fish wrote: > On 7/7/06, Daniel Iliev <[EMAIL PROTECTED]> wrote: >> Well, correct me if I'm wrong but it think it's not quite true. >> >> I *think* if you have buildpkg in your FEATURES, you will >> get binary packages in your $PKGDIR with the new, updated versions. > > But previous versions are not deleted until you do an "eclean > packages". So yeah, you need to have buildpkg in FEATURES for a while > to get a nice set of backup packages, or use quickpkg. > > -Richard And if you have not cleaned out your distfiles, you can always just specify the version you want to emerge as well. Dale :-) :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: java 1.4 & eclipse
On 7/10/06, James <[EMAIL PROTECTED]> wrote: Ah, that brings up a follow up question. If many of the ebuild packages have built in documentation, then is there a tool/package/web_interface that allow the document perusal without individual(admin) interaction? Well the general rule is that package documentation files other than man pages and info docs get installed under /usr/share/doc/-. This would include html, pdfs, and text files. For example, bind-tools, ntp, python-docs, etc all install their user manuals under this directory. The bad news is that this doesn't include everything. Build instructions or other items not normally installed as part of the package will not be found here. In some cases it is necessary to look for extra documentation files in the source archives, the web site, or even the CVS repository of the upstream project that provides the package. -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Any guess to why amarok visualizations fail to function?
On 7/9/06, Kenton Groombridge <[EMAIL PROTECTED]> wrote: I posted this a couple weeks ago with no answer. I am still unable to determine what is going on. Anytime I select a visualization from Tools->Visualizations menu, I get the following output and the visualization output window closes. Well it looks like I get the same problems running the same versions of amarok, libvisual, and libvisual-plugins. Unfortunately the trace output that I get seems more closely related to trying to cleanup after the amarok_libvisual crash than pointing to the actual cause of the crash. I've built debug versions of these to do some more testing with and hopefully submit a useful bug report... Have you tried backing off to a previous version of amarok, like 1.4.0a? It looks like the libvisual-0.4 updates in 1.4.1 are pretty significant (previous amarok versions used libvisual-0.2). -Richard -- gentoo-user@gentoo.org mailing list
[gentoo-user] qtruby: smoke or something else?
Hello list, I cannot build qtruby-3.5.3. Before you tell me: yes, I have tried re-emerging smoke and qt but nothing changed. This is where the build fails: make[3]: Entering directory `/var/tmp/portage/qtruby-3.5.3/work/qtruby-3.5.3/qtruby/bin' i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/kde/3.5/include -I/usr/qt/3/include -I. -I/usr/lib/ruby/1.8/i686-linux -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -march=pentium3 -O2 -pipe -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -c -o qtrubyinit.o `test -f 'qtrubyinit.cpp' || echo './'`qtrubyinit.cpp /bin/sh ../../libtool --silent --mode=link --tag=CXX i686-pc-linux-gnu-g++ -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -march=pentium3 -O2 -pipe -fomit-frame-pointer -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common-o qtrubyinit -module -L/usr/kde/3.5/lib -L/usr/qt/3/lib -L/usr/lib -version-info 0:0:0 -L../../smoke/qt/ -L/usr/lib qtrubyinit.o -lqt-mt -lz -lpng -lz -lm -lXext -lX11 -lSM -lICE -lpthread -Wl\,-R -Wl\,/usr/lib -L/usr/lib -L. -lruby18 ../../smoke/qt/libsmokeqt.la ../../qtruby/rubylib/qtruby/libqtrubyinternal.la libtool: link: warning: `-version-info' is ignored for programs /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::bucket(QSound*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::qt_invoke(int, QUObject*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::staticMetaObject()' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::play(QString const&)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QSqlRecordShared::~QSqlRecordShared()' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `typeinfo for QSqlRecordShared' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::decLoop(QSound*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::qt_emit(int, QUObject*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::~QAuServer()' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::init(QSound*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::className() const' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::qt_cast(char const*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `typeinfo for QAuServer' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuBucket::~QAuBucket()' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::setBucket(QSound*, QAuBucket*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `typeinfo for QAuBucket' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::trUtf8(char const*, char const*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::qt_property(int, int, QVariant*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::QAuServer(QObject*, char const*)' /usr/kde/3.5/lib/libsmokeqt.so: undefined reference to `QAuServer::tr(char const*, char const*)' collect2: ld returned 1 exit status make[3]: *** [qtrubyinit] Error 1 make[3]: Leaving directory `/var/tmp/portage/qtruby-3.5.3/work/qtruby-3.5.3/qtruby/bin' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/qtruby-3.5.3/work/qtruby-3.5.3/qtruby' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/qtruby-3.5.3/work/qtruby-3.5.3' make: *** [all] Error 2 !!! ERROR: kde-base/qtruby-3.5.3 failed. Call stack: ebuild.sh, line 1545: Called dyn_compile ebuild.sh, line 940: Called src_compile qtruby-3.5.3.ebuild, line 29: Called kde_src_compile 'configure' 'make' kde.eclass, line 302: Called die !!! died running emake, kde_src_compile:make !!! If you need support, post the topmost build error, and the call stack if relevant. Any ideas? Many thanks in advance, Norberto pgpr5TZ3yf259.pgp Description: PGP signature
[gentoo-user] fujistu s2110 amd64 problem
Yesterday evening, I installed gentoo on a new fujistu s2100 laptop. It's an amd64 one. I have a wierd problem: the network speed is very slow and it comes up and dow frequently. So transfering files in my home netword is very time consuming. Specially, the connection speed is about 50 kps or so. I used genkernel all to compile the kernel, and the kernel version is 2.6.15. I noticed that the ethernet driver is b44. This notebook has a wireless netcard too, so the ethernet interface I used for my connection is eth1. I don't know what trouble with it, any suggestion? -- Shaochun Wang <[EMAIL PROTECTED]> GPG Fingerprint: 70C2 6945 0E46 E08B 419A 007C AC5C F21F 358A 0833 You can get my publickey from the following url: http://lcs.ios.ac.cn/~scwang/docs/scwangpublickey.gpg -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] d
James wrote: Ah, that brings up a follow up question. If many of the ebuild packages have built in documentation, then is there a tool/package/web_interface that allow the document perusal without individual(admin) interaction? For example, man pages are auto loaded and ready with 'man ' so I'd be interested in any similiar doc system for xml, html, doc* It seems like quite often I have to go on a search expedition for docs Is there a gentoo standard or a wiki related to this subject? This is an interesting question. To my knowledge we have man pages, info pages, application and upstream documentation, but no unified access tool. The closest would be beagle (I haven't looked a beagle since 0.0.10). It should be possible to index man pages, info pages, and the contents of installed applications. Maybe even throw in ebuild elog messages and google search... Once indexed, then pretty much any style of front-end could be added. Need to think about this. Have fun, Roy -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] unified document viewing
Roy Wright wrote: James wrote: Ah, that brings up a follow up question. If many of the ebuild packages have built in documentation, then is there a tool/package/web_interface that allow the document perusal without individual(admin) interaction? For example, man pages are auto loaded and ready with 'man ' so I'd be interested in any similiar doc system for xml, html, doc* It seems like quite often I have to go on a search expedition for docs Is there a gentoo standard or a wiki related to this subject? This is an interesting question. To my knowledge we have man pages, info pages, application and upstream documentation, but no unified access tool. The closest would be beagle (I haven't looked a beagle since 0.0.10). It should be possible to index man pages, info pages, and the contents of installed applications. Maybe even throw in ebuild elog messages and google search... Once indexed, then pretty much any style of front-end could be added. Need to think about this. Have fun, Roy Sorry, resending with a subject. -- gentoo-user@gentoo.org mailing list
