On Mon, Jul 10, 2006 at 12:38:47PM +0200, Anno v. Heimburg wrote:
> Hi Andreas!
>
> > I really like to use DMA for my cdrom/burner but I cant figure out how to
> > make it working!
>
> > tapa ~ # hdparm -d1 /dev/cdrom
> > /dev/cdrom:
> > setting using_dma to 1 (on)
> > HDIO_SET_DMA failed: Operation not permitted
> > using_dma = 0 (off)
>
> Two hints, perhaps they help
> - "hdparm -i $DEVICE" will display what the device can support
> - I would run hdparm on the physical device file, that is /dev/hdc, not on
> the cdrom-link.
tapa ~ # hdparm -i /dev/hdc
/dev/hdc:
Model=HL-DT-ST DVD-RW GWA-4082N, FwRev=CB03, SerialNo=4CA07617AFA8
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-2
ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
* signifies the current active mode
Hmm, I see AdvancedPM=no ...? Before I changed to Gentoo-Linux I was using
Ubuntu. If I copied files from the cdrom it was _very_ FAASST ... but now ...
Thx for your help!
>
> > Does anyone of you know if there is DMA support for this cdrom-drive
>
> It sounds like a plain old ATAPI drive, so should work with the generic
> stuff. No specific knowledge about your drive, though.
>
> Anno
>
> --
> gentoo-user@gentoo.org mailing list
>
--
"Dan ketika Guru Isa mendengar derap sepatu datang
ke pintu kamar mereka, dia merasa damai dengan rasa
takutnya yang timbul. Dia tahu teror mereka tidak
akan bisa menyentuhnya lagi. Dia telah bebas."
(Mochtar Lubis, "Jalan Tak Ada Ujung", 1952)
--
gentoo-user@gentoo.org mailing list
